Professional Documents
Culture Documents
EN 10058 (TOLERANCES)
mm mm > 10 ≤ 40 ± 0,75
8 – 14 ± 0,4 > 40 ≤ 80 ± 1,0
15 – 25 ± 0,5 > 80 ≤ 100 ± 1,5
26 – 35 ± 0,6 > 100 ≤ 120 ± 2,0
40 – 50 ± 0,8 > 120 ≤ 150 ± 2,5
Nominal Limit deviation mm
55 – 90 ± 1,0
thickness (aa) mm a)
100 ± 1,3 ≤ 20 ± 0,5
110 – 120 ± 1,5 > 20 ≤ 40 ± 1,0
130 – 150 ± 1,8 > 40 ≤ 80 ± 1,5
a) When ordering, the total ranges for the permissible deviation may, by agreement, be entirely on the plus side
square flat
http://www.lucefin.com/en/siderurgia/area-tecnica/en-10058/ Page 1 of 2
Lucefin » EN 10058 (Tolerances) 2/7/17, 9:48 AM
http://www.lucefin.com/en/siderurgia/area-tecnica/en-10058/ Page 2 of 2