Professional Documents
Culture Documents
Chapter 3
Chapter 3
Method of Study
1
Materials
Procedure:
After preparing the necessary materials, the measuring cup was filled with
water specifically, tap water, salt water and purified water, 4 times and poured
the water to 3 different containers which are then labeled to classify and
differentiate the contents of the 3 different containers which are; tap water,
salt water and purified water. After pouring 3 different water to their
respective containers, the Zinc Metal Plate is then submerged within the
container containing water. The container is then left without any lid for air to
pass in that state for 3 weeks. Within the duration of 3 weeks, every 3 days
the state of the Zinc Metal Plate is released from the water and the rusty parts
of the metal is then scraped then placed on the Digital Balance to measure it’s
2
Documentation
Fill the measuring cup and pour the water to their respective container
4 times every kind of water.
3
Submerge the Zinc Metal Plate into the three separate containers