Professional Documents
Culture Documents
2. Watt. Which of the following quantities is not the property of the system?
1. Pressure.
2. Temperature.
3. Specific Volume.
4. Heat.
14.The opening set pressure of the SH safety valve is ________ than drum
Safety valve opening set pressure
1. Lower.
2. Higher.
17. Make up of the working fluid is done in ________ part of the cycle.
1. Boiler
2. Turbine
3. Feed pump
4. Condenser
20. In a balanced draught system, the balancing point means the point
1. At which furnace pressure is equal to wind box pressure
2. At which the furnace pressure is equal to FD discharge pressure
3. In the furnace where atmospheric pressure is acting
4. Where balancing discs are provided to prevent vibration in ducting
31. If the moisture content in the coal reduces the capacity of the Mill
1. Decreases
2. Increases
3. Remains same