Professional Documents
Culture Documents
UDC 621.882.6
NATIONAL STANDARD
OF THE PEOPLE’S REPUBLIC OF CHINA
中华人民共和国国家标准
GB 799-88
Supersedes GB 799-76
Eyelet Bolts
地脚螺栓
Contents
Eyelet Bolts
地脚螺栓
1 Subject Contents
This standard specifies Grade C eyelet bolts with thread specification of M6~M48.
Notes: priority shall be given to commodity fastening piece variety.
2 Normative References
3 Dimension
Rolled end
The end shall meet those specified in GB 2; the diameter of rod without thread approximately equals to the pitch diameter
or major diameter of thread.
1
Table 1
mm
Thread specification d M6 M8 M10 M12 M16 M20 M24 M30 M36 M42 M48
D 10 10 15 20 20 30 30 45 60 60 70
l1 l+37 l+37 l+53 l+72 l+72 l+110 l+110 l+165 l+217 l+217 l+225
X max 2.5 3.2 3.8 4.2 5 6.3 7.5 8.8 10 11.3 12.5
80 72 88
4 Technical Specification
Tolerance 8g
Thread
Standard GB 196 and GB 197
Product grade Except those specified in Chapter 3, the rest shall be of Grade C.
Tolerance
Standard GB 3103.1
Note: by structure reason, no wedge load test or head rod bonding strength test shall be carried out to eyelet bolts.
2
5 Marking
5.1 The marking method shall be in accordance with those specified in GB 1237.
5.2 Marking example:
Marking for eyelet bolts without surface treatment and with thread specification d=M20,
nominal length l=400mm and performance grade of Grade 3.6:
Bolt: GB 799 M20×400.
3
Additional Explanation