Professional Documents
Culture Documents
c32 Flywheel Housing
c32 Flywheel Housing
Shutdown SIS
Previous Screen
Specifications
C27 and C32 Generator Set Engines
Media Number -RENR7167-10 Publication Date -01/11/2013 Date Updated -11/11/2013
i04395594
Flywheel Housing
SMCS - 1157
Illustration 1 g02570036
Rear view
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/... 5/19/2019
C32 Generator Set JAZ00001-UP(SEBP6454 - 05) - Systems & Components Page 2 of 3
Illustration 2 g02570037
Tightening sequence
Table 1
Specification for 272-0246 Flywheel Housing Gp
Item Qty
Part Specification Description
Before installation of the flywheel housing, inspect the front face of the
flywheel housing and the rear face of the rear housing. The components
- - -
must be free of the following substances: oil, fuel, water, assembly
compounds, and any other contaminants.
Check assembled installation depth of the crankshaft seal group with the
- - -
crankshaft in any axial position.
Use the following procedure to tighten the flywheel housing bolts. Tighten
- - -
the bolts in the numerical sequence as shown in the Illustration 2.
245-
Tighten bolt (1) through bolt (2) to
1 2 3803
55 ± 10 N·m (41 ± 7 lb ft).
Bolt
2H-
Tighten bolt (3) through bolt (10) to
2 8 6488
135 ± 20 N·m (100 ± 15 lb ft).
Bolt
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/... 5/19/2019
C32 Generator Set JAZ00001-UP(SEBP6454 - 05) - Systems & Components Page 3 of 3
0L-
22 Tighten bolt (11) through bolt (32) to
3 1143
47 ± 9 N·m (35 ± 7 lb ft).
Bolt
The seal driver must not contact the seal within the
177.80 ± 0.25 mm (7.000 ± 0.010 inch) diameter.
4 - -
The seal and the sleeve of the crankshaft seal group must not be used if the
seal and the sleeve have been separated.
Distance from the sleeve to the seal is
A - -
6.55 to 6.15 mm (0.258 to 0.242 inch).
Installation depth of the sleeve from the rear face of the crank shaft is
C - -
1.5 ± 0.5 mm (0.06 ± 0.02 inch).
Copyright 1993 - 2019 Caterpillar Inc. Sun May 19 07:29:53 UTC+0300 2019
All Rights Reserved.
Private Network For SIS Licensees.
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/... 5/19/2019