Professional Documents
Culture Documents
Inflatable
Bridge Plugs and
Cement Retainers
Advantages:
the tool
can then
then be
be setwhich
set by closes the
by circulating
circulating circulating
a aball to to
ball the (276 Bar)
ports. Surface pressure is then
Maximum Differential Pressure, PSI
byThe
applying six rounds
work string of right-hand
is disconnected
The work string is disconnected by 1000
rotation
by applying or bysix hydraulic
rounds of pressure.
right-hand 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 inches
applying six rounds of right-hand rotation (69 Bar) 120 125 150 175 200 225 250 275 300 325 350 375 400 425 450 475 500 525 550 600 625 650 mm
1000
rotation or by hydraulic pressure. 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 inches
or byHydraulic Release
hydraulic pressure. (69 Bar) 120 125 150 175 200 225 250 275 300 325 350 375 400 425 450 475 500 525 550 600 625 650 mm
Calipered Open Hole Size
Hydraulic Release
For applications with restricted IMPORTANT: The suggested ratings shown
Calipered Openon theSize
Hole graph are not a measure of the
Hydraulic Release
For applications
rotation with restricted
of the workstring or small packer's self-anchoring capability, which may be less than the suggested rated working
IMPORTANT: The suggested ratings shown on the graph are not a measure of the
pressure and may varyratings
under certain circumstances. Consult TAM International for
IMPORTANT:
packer'sThe suggested
self-anchoring shown
capability, whichon
maythebegraph are
less thannot
the asuggested
measure of theworking
rated packer’s
rotation of the workstring
inside diameters, the TAMorhydraulic
small details.
pressure capability,
and may vary under
For inside
applications with restricted maycertain circumstances. Consult rated
TAM International for
TAMrotation of self-anchoring which be less than the suggested working pressure and
releasediameters,
disconnectsthewithout hydraulic
rotation details.
the work string or small inside diameters, may vary under certain circumstances. Consult TAM International for details.
release disconnectsAfter
of the workstring. without rotation
the TAM
the TAM
of thehydraulic
Cement release
workstring.
Retainer disconnects
After the TAM is
or TAMPLUG
without
set,rotation
Cement of thehydraulic
Retainer
additional work string.
or TAMPLUG Afteris the
pressure Part Number Part Number TAM Cement Retainer
set, additional
TAMdisconnects
Cement Retainer hydraulic pressure
or TAMPLUG is set,
the workstring. Part
TAMNumber
Cement Part Number
TAMPLUG TAM Cement Retainer
& TAMPLUG
disconnects TAMRetainer
Cement TAMPLUG &run-in
TAMPLUG
diameter
The
additional TAM the
hydraulic workstring.
hydraulic
pressure release works
disconnects
ThewithTAMcoil
hydraulic release works Retainer10 ft. Seal
3 ft. Seal 3 ft. Seal 10 ft. Seal run-in
in. diameter
mm.
well
the work string. or small diameter
well with coil or smalloperations
diameter in 3 463-CR-01
ft. Seal 10463-CR-02
ft. Seal 3 463-TP-01
ft. Seal 10463-TP-02
ft. Seal in.4 5/8 mm.118
tubing and simplifies
Thetubing
TAM 425-CR-01
463-CR-01 -
463-CR-02 -
463-TP-01 -
463-TP-02 4 45/5/8
16 109
118146
deephydraulic
and
or highlyrelease
simplifies works
deviated well with
operations
wells. in 575-CR-01 575-CR-02 575-TP-01 575-TP-02 5 3/4
463-CR-01
575-CR-01 463-CR-02
575-CR-02 463-TP-01
575-TP-01 463-TP-02
575-TP-02 4 55/3/4
8 118
146
coil deep ordiameter
or small highly deviated wells.
tubing and simplifies 700-CR-01
575-CR-01
700-CR-02
575-CR-02
700-TP-01
575-TP-01
700-TP-02
575-TP-02
7
5 73/4 146
178
700-CR-01 700-CR-02 700-TP-01 700-TP-02 178
operations in deep oronhighly
* See illustrations deviated wells.
back cover 825-CR-01
700-CR-01
825-CR-02
700-CR-02
825-TP-01
700-TP-01
825-TP-02
700-TP-02 7
8 1/4 178
210
* See illustrations on back cover 825-CR-01
11-CR-01 825-CR-02
11-CR-02 825-TP-01
11-TP-01 825-TP-02
11-TP-02 81 1/4 210
825-CR-01 825-CR-02 825-TP-01 825-TP-02 8 /4 1/4
11 210286
* See illustrations on back cover 11-CR-01
15-CR-01
11-CR-01
11-CR-02
15-CR-02
11-CR-02
11-TP-01
15-TP-01
11-TP-01
11-TP-02
15-TP-02
11-TP-02
11 1/43/4
11 115
/4
286
286400
15-CR-01
15-CR-01 15-CR-02
15-CR-02 15-TP-01
15-TP-01 15-TP-02
15-TP-02 15153/3/4
4 400
400
Check Valve
Shear Pin
Pin Shears
Sliding Sleeve Sleeve Slides Check Valve
Closed
Inflation Port
Inflation Port Pin Shears
Ball Closes
Shear Pin
Choke Check Valve
Check Valve Closes after
Squeeze
Cementing Check Valve
Closed
Ball and
Choke
Expelled
TAMPLUG
Ball
SafeLok Valve
Circulating Assembly Inflation Port
Port
800.462.7617
Worldwide sales and service contacts at www.tamintl.com
713.462.7617
The information and/or data in this publication is supplied solely for informational purposes
713.462.1536 Fax and TAM International makes no guarantees or warranties, either expressed or implied, with
www.tamintl.com respect to its accuracy, completeness or use.