Professional Documents
Culture Documents
𝑡 = 𝑑 √(𝐶𝑃/𝑆𝐸) +
CA
Where,
Fig. UG-34
CA = 0.125 in
d = 1,050 in + 2 *CA = 1.050 + 0.250 in = 1.300 in
C= 0.75
P= 380 psi
S = 20,000 psi
E= 1
Then,
t= 0.2802 in
Minimum required thicknes 0.2802 in . Thickness allowable by plug hexagonal head thr
ASME B 1.20.1 i 0.5457 in (effective length of the thread), then the plug hexagonal head selec
al head thr 3/4 according to
xagonal head selected is adequate.
Vent (V1)
𝑡 = 𝑑 √(𝐶𝑃/𝑆𝐸) +
CA
Where,
Fig. UG-34
CA =0.0625 in
d = 1.050 in + 2 *CA = 1.050 + 0.125 in = 1.175 in
C= 0.75
P= 150 psi
S = 20,000 psi
E= 1
Then,
t= 0.1506 in
Minimum required thicknes 0.1506 in . Thickness allowable by plug hexagonal head thr
ASME B 1.20.1 i 0.5457 in (effective length of the thread), then the plug hexagonal head selec
al head thr 3/4 according to
xagonal head selected is adequate.
Vent (V1)
𝑡 = 𝑑 √(𝐶𝑃/𝑆𝐸) +
CA
Where,
Fig. UG-34
CA =0.0625 in
d = 1.050 in + 2 *CA = 1.050 + 0.125 in = 1.175 in
C= 0.75
P= 225 psi
S = 20,000 psi
E= 1
Then,
t= 0.1704 in
Minimum required thicknes 0.1704 in . Thickness allowable by plug hexagonal head thr
ASME B 1.20.1 i 0.5457 in (effective length of the thread), then the plug hexagonal head selec
al head thr 3/4 according to
xagonal head selected is adequate.
Vent (V1)
𝑡 = 𝑑 √(𝐶𝑃/𝑆𝐸) +
CA
Where,
Fig. UG-34
CA =0.0625 in
d = 2.375 in + 2 *CA = 2.375 + 0.125 in = 2.500 in
C= 0.75
P= 225 psi
S = 20,000 psi
E= 1
Then,
t= 0.2921 in
Minimum required thicknes 0.2921 in . Thickness allowable by plug hexagonal head thr
ASME B 1.20.1 i 0.7565 in (effective length of the thread), then the plug hexagonal head selec
al head thr 2 according to
xagonal head selected is adequate.