Professional Documents
Culture Documents
Cutting Torch
SPEX Offshore offers MCR Oil Tools’
RCT™ Radial Cutting Torch (RCT) tool for
severing all common sizes of tubing,
casing and drill pipe. The RCT tool is a
patented cutting device that does not
utilise explosive components or
dangerous chemicals that may pose
handling issues. The RCT can be
deployed within hours and
significantly reduce non-production
time.
www.spex-innovation.com
_________________________________________________________________________________________________________
www.spex-innovation.com
Features and Benefits Isolation Sub
Thermal Generator
Contains no explosives or dangerous
chemicals
Non-HazMat and HazMat rated fuel Radial Cutting Torch
No storage, handling or disposal problems
Causes no flaring or swelling of the pipe
Clean cut for easier fishing operations
Cuts all steels, hastalloys, high chrome and
most plastic coated pipe
Can be run through restrictions to sever
pipe with large outer diameters
Thermal Generator™ System is radio safe
and independently approved by Franklin
Applied Physics
Applications
Pressure Balance Anchor
Can be used in close contact pipe conditions
Will cut in dry pipe conditions
Will operate in temperatures to 500°F
Will cut in exotic fluids and heavy drilling
muds
_________________________________________________________________________________________________________
www.spex-innovation.com
Specification Tables
Recommended Torch System at Indicated Target Zone Pressure
Target Dimension Pressure Range Pressure Range Pressure Range Pressure Range Pressure Range Pressure Range
0 to 4,000 psi 4,001 to 10,000 psi 10,001 to 12,000 psi 12,001 to 15,000 psi 15,001 to 17,000 psi 20,001 to 25,000 psi
CT up to 1-1/2” OD RCT-0750-200 RCT-0750-300 HP-0750-1000
RCT™, Thermal Generator™, MCR Oil Tools® and MCR® are trademarks of MCR Oil Tools, LLC and/or one or more of its affiliates,
and may be registered in the United States Patent and Trademark Office and in other countries.