You are on page 1of 2

RL2600DG (2V600Ah)

RL2600DG is GEL Deep cycle battery superiorly designed for frequent


cyclic discharge applications under extreme temperature. By using strong
grid to insure reliable performance under frequent cyclic discharge use. 400
cycles could be available at 100% DOD. Offering extra-durable cyclic
performance, high efficiency of recovery ,that is more suitable for solar,
mobility, E-toll, marine , deep discharge UPS etc..
Specification
Cells Per Unit 1
Voltage Per Unit 2
Capacity 600Ah@20hr-rate to 1.75V per cell @25 oC
Weight Approx. 37.0 Kg
Max. Discharge Current 6000 A (5 sec)
Internal Resistance Approx. 0.63 mΩ
o o
Operating Temperature Range Discharge: -40 C ~60 C
Charge: -20 oC~50 oC
Storage: -40 oC~60 oC

Normal Operating Temperature Range 25 oC±5 oC


Float charging Voltage 2.27 to 2.3 VDC/unit Average at 25 oC
Recommended Maximum Charging 120A
Current Limit
Equalization and Cycle Service 2.37 to 2.4 VDC/unit Average at 25 oC
Self Discharge RITAR Valve Regulated Lead Acid (VRLA) batteries can be stored
o
for more than 6 months at 25 C. Self-discharge ratio less than 3%
per month at 25 oC. Please charge batteries before using.

Terminal Terminal F10


Container Material A.B.S. (UL94-HB), Flammability resistance of UL94-V1
can be available upon request.

Dimensions
Unit: mm Dimension: 302(L)×175(W)×328(H)
Terminal F10

Constant Current Discharge Characteristics: A (25 oC)

F.V/Time 15MIN 30MIN 1HR 2HR 3HR 4HR 5HR 6HR 8HR 10HR 20HR
1.60V 733.2 5 6 7 .7 3 6 5 .4 2 1 7 .2 161.8 129.0 1 0 8 .6 91.20 73.62 6 1 .5 4 3 1 .6 9
1.65V 697.2 5 4 5 .1 3 4 9 .5 2 0 9 .3 155.0 124.4 1 0 4 .1 89.01 70.33 5 9 .3 4 3 0 .5 6
1.70V 650.1 5 1 3 .9 3 4 2 .7 2 0 5 .9 151.6 123.3 1 0 2 .9 86.81 69.23 5 8 .2 4 2 9 .9 9
1.75V 577.1 4 5 6 .8 3 1 5 .6 1 9 4 .6 143.7 116.5 9 8 .4 1 82.41 67.03 5 7 .1 4 2 9 .4 3
1.80V 496.8 4 2 1 .2 2 9 7 .5 1 8 5 .5 138.0 115.4 9 5 .0 2 81.31 65.93 5 4 .9 4 2 8 .3 0
1.85V 420.1 3 7 9 .2 2 7 4 .9 1 7 5 .3 131.2 106.3 9 0 .4 9 76.92 62.63 5 2 .7 4 2 7 .1 6

Constant Power Discharge Characteristics: W (25 oC)


F.V/Time 15MIN 30MIN 1HR 2HR 3HR 4HR 5HR 6HR 8HR 10HR 20HR
1.60V 1284 100 9 6 5 2 .7 3 9 2 .5 294.1 236.4 2 0 0 .2 172.5 137.4 116.5 5 9 .9 9
1.65V 1250 100 4 6 5 0 .4 3 8 6 .9 293.0 234.2 1 9 8 .0 170.3 136.3 115.4 5 9 .4 2
1.70V 1181 9 3 4 .0 6 3 0 .1 3 8 1 .2 283.9 230.8 1 9 5 .7 167.0 134.1 114.3 5 8 .8 5
1.75V 1052 8 4 1 .4 5 8 8 .2 3 6 4 .2 273.7 222.8 1 8 7 .8 159.3 130.8 111.0 5 7 .1 6
1.80V 910.3 7 7 5 .7 5 5 4 .3 3 4 8 .4 262.4 216.1 1 8 2 .1 156.0 126.4 107.7 5 5 .4 6
1.85V 776.3 6 9 9 .2 5 1 1 .3 3 2 8 .0 250.0 199.1 1 7 4 .2 147.2 120.9 104.4 5 3 .7 6

All mentioned values are average values.


RL2600DG 2V600Ah

Li fe ch ar ac ter ist ics of cy cl ic us e Storage characteristic

100
120 Su ppleme ntary ch arge required
0℃ (Ca rry ou t suppleme ntary ch arge
before us e if 100% ca pacity is
100 80 requires)

Capacity (%)
10℃
Su ppleme ntary ch arge required
Capacity(%)

80 60 before us e.
This su ppleme ntary ch arge wi ll help
to recover the ca pacity an d sh ould
60 20℃ be ma de as ea rly as po ssible.
100% 80% 50% 30% 15% 40 40℃ 30℃
D.O.D D.O.D D.O.D D.O.D D.O.D
Su ppleme ntary ch arge ma y of ten
40 fail to recover the ca pacity.
The ba ttery sh ould ne ver be left
20 standing till this st ate is reached
20

0
Su ppleme ntary ch arge an d st orage
2 4 6 8 10 12 14 16 18 20 22 24 guidelines
0 400 800 1200 1600 2000 2400
Number of Cycle(Times) Storage Time (months)

Charge characteristic curve for cyclic use Discharge characteristic curve


15 7.5 5.0 120 0.24
Chcrge Volume 13 6.5 4.3

14 7.0 4.7 100 0.20


Chcrge Voltage T erm inal V oltage (V )
12 6.0 4.0
C h a rg e V o lta g e ( V )

C h a rg e V o lu m e (% )

C h a rg e C u rre n t (C A )

13 6.5 4.3 80 0.16


① Discharge
100%(0.05CA×20h) 11 5.5 3.7
12 6.0 4.0 50%(0.05CA×10h) 60 0.12 0.05C
② Charge 0.16C 0.093C
Chcrge Voltage2.275V/C 0.35C
Charge Current0.1CA 10 5.0 3.3 0.62C
11 5.5 3.7 40 0.08
③ Temperature 25℃
3C 1C

10 5.0 3.3 20 0.04 9 4.5 3.0


Charge Current
0.6 1.2 3 6 12 30 1 2 5 10 20 24
9 4.5 3.0 0 0
0 2 4 6 8 10 12 14 16 18 20 24 28 min Hr

Charge Time(h) Discharge Time

Capacity Factors With Different Temperature


Battery Type -20℃ -10℃ 0℃ 5℃ 10℃ 20℃ 25℃ 30℃ 40℃ 45℃
GEL 6V&12V 50% 70% 83% 85% 90% 98% 100% 102% 104% 105%
Battery 2V 60% 75% 85% 88% 92% 99% 100% 103% 105% 106%
AGM 6V&12V 46% 66% 76% 83% 90% 98% 100% 103% 107% 109%
Battery 2V 55% 70% 80% 85% 92% 99% 100% 104% 108% 110%

Discharge Current VS. Discharge Voltage Maintenance & Cautions

Final Discharge 1.75V 1.70V 1.60V Cycle service


Voltage V/cell
※  Avoid battery over discharge, especially battery sereis connection use.
Discharge (A)≥1.0C
(A)≤0.2C 0.2C<(A)<1.0C
Current (A)
※ Charged with recommend voltage, ensure battery can be full recharged.

In general, recharge capacity should be 1.1-1.15 times discharge capacity.


Charge the batteries at least once every six months,
o
if they are stored at 25 C. ※ Effect of temperature on cycle charge voltage: -4mV/℃/Cell.
Charging Method:
※ There are a number of factors that will affect the length of cyclic service.
Constant Voltage -0.2Cx2h+2.4~2.45V/Cellx24h,Max. Current 0.3CA
The most significant are depth of discharge, ambient temperature,
Constant Current -0.2Cx2h+0.1CAx12h discharge rate, and the manner in which the battery is recharged.

Fast -0.2Cx2h+0.3CAx4.0h Generally specking, the most important factors is depth of discharge.

SHEN ZHEN RITAR POWER CO.,LTD. Address: Rm405,Tower C, Huahan Building,Langshan Rd16, Nanshan District, ShenZhen, 518057, China
URL:www.ritarpower.com Tel:+86-755-33981668 Fax:86-755-8347-5180 2010- Version 1

You might also like