Professional Documents
Culture Documents
Zinc coating:
127.5
2.5
X-ENP-21 HVB
2.5
Carbon steel shank: HRC58
Zinc coating: 8–16 µm
C
51 20.6 51 20.6
31 63 31
63
Recommended fastening tools
Tool DX 76 DX 76 PTR
X-HVB 110 X-HVB 95 Fastener guide X-76-F-HVB X-76-F-HVB-PTR
Piston X-76-P-HVB X-76-P-HVB-PTR
Cartridges 6.8/18M black, red
112.5
2
95
TZÚS (Czech)
50 24.3 50 24.3
60 88 Note: technical data presented in these approvals and
design guidelines reflect specific local conditions and
may differ from those published in this handbook.
If the fastening is subject to an approval process or
where a design guideline must be used, technical data
X-ENP-21 HVB
Ø7.4
in the approval or design guideline has precedence
over data presented here. Approval copies are avail-
able from your Hilti technical advisory service.
Ø4.5
25.8
Ø15
12 / 2013 111
X-HVB
Applications
Examples
Design data
Solid slabs
Characteristic shear Design shear Allowable horizontal Allowable resistance
resistance resistance shear (working load)
Nominal PRk [kN] 1) PRd [kN] 2) q [kN] 3) RD [kN] 4)
X-HVB 50 23 18 N.A 13
X-HVB 80 28 23 14 16
X-HVB 95 35 28 17.5 22
X-HVB 110 35 28 17.5 22
X-HVB 125 35 28 17.5 22
X-HVB 140 35 28 17.5 22
1)
As defined in EN 1994-1-1 (Nominal strength in AISC-LRFD; unfactored shear resistance in CISC.
2)
As defined in EN 1994-1-1
3)
Allowable shear in AISC-ASD
4)
Allowable shear for working load design
112 12 / 2013
X-HVB
b0
≤ 1 x 1,25
C
Note: kt ≤ 1.0
K = 0.85
Nr = HVBs / rib (1, 2 or 3)
≥ 1.8 ⇒ kp = 1.0
Ribs parallel to beams b0
for
hap
Note: kp ≤ 1.0
12 / 2013 113
X-HVB
Engineering advice
114 12 / 2013
X-HVB
Application requirements
General positioning
or or
Position the HVBs so that the shear force is transferred symmetrically to the beam. The HVB
orientation parallel to the axis of the beam is preferred.
12 / 2013 115
X-HVB
2a) Position in the rib : 1 HVB per rib – leg centred in the rib or 40 mm clearance
= =
≥ 40 mm
C 2b) With 2 or 3 HVBs per rib – legs centred in the rib or alternated about the centre
= =
0
m = rib spacing
hc hc
0
• With 1 connector per row, alternate direction of connectors from X-HVB to X-HVB.
• With 2 or 3 connectors per row, alternate direction of connectors inside of each row and
from row to row.
116 12 / 2013
X-HVB
Corrosion information
The intended use only comprises fastenings which are not directly exposed to external
C
weather conditions or moist atmospheres.
Application limits
Application limits are valid only if correct cartridge and power setting are used!
Application limits X-ENP-21 HVB Cartridge preselection and power setting
>20 >20
10
10
18
Thermo-mechanical- 18
17 ly rolled construction
steel 17
Steel thickness, tII [mm]
16
15 16
Black 4 Black 4
Steel thickness tII [mm]
from from
14 Applicable
15
10 mm 10 mm
range of base
13 materials
14
12
13
11
10
12
9 11
S 235
8
Black 3
10
S 275
Red 4
7
9
Black 2
S 355
6
350 400 450 500 550 600 650 700 750 8
Steel strength, Rm [N/mm2] S 235 S 355
12 / 2013 117
X-HVB
Fastener selection
hc
hsc
hap
b0 b0
≥ 8 mm
≤ 1 x 1,25
C Connector
Fastening inspection
hNVS
X-HVB
Metal decking
Structural steel
118 12 / 2013