Professional Documents
Culture Documents
Argentina Packer Catalog 2 PDF
Argentina Packer Catalog 2 PDF
Equipment Catalog
Argentina Manufacturing Plants
www.slb.com /packers
Schlumberger
3750 Briarpark Drive
Houston, Texas, USA 77042
www.slb.com
13-CO-0098
Contents i
Anchors
Model: AR-1.......................................................................................................................................................... 50
Model: AR-2.......................................................................................................................................................... 52
Model: AR-3 DL.................................................................................................................................................... 54
Model: AR-4.......................................................................................................................................................... 56
Model: ATC........................................................................................................................................................... 58
Model: ATN........................................................................................................................................................... 60
Circulating Subs
Model: DCH-1....................................................................................................................................................... 62
Rotary Subs
Model: RHM......................................................................................................................................................... 63
Model: RN............................................................................................................................................................. 64
Model: RK.............................................................................................................................................................. 66
Accessories
Blank Cover.......................................................................................................................................................... 68
Entry Guide........................................................................................................................................................... 69
½ Mule Shoe........................................................................................................................................................ 70
Blank Plug............................................................................................................................................................. 71
X-Overs.................................................................................................................................................................. 72
Float Shoes
Model: RZF............................................................................................................................................................ 74
Pup Points
Model: RPJ........................................................................................................................................................... 75
Lateral Outlet Mandrels
Model: KP.............................................................................................................................................................. 76
Model: MP............................................................................................................................................................ 77
Retrievable Flow Regulator Valves
Model: FRS............................................................................................................................................................ 78
Model: FSS............................................................................................................................................................ 80
Service Tools
Model: WRTP-1.................................................................................................................................................... 82
Model: Jet Pump................................................................................................................................................. 84
Schlumberger packers and completions Health, Safety, and the Environment The HSE Management System model
manufacturing plants in Argentina feature Schlumberger has a long-standing HSE comprises eight interrelated components:
a line of field-proven packers and packer commitment to the highest standards for ■■ commitment and leadership
accessories suited for noncomplex, the health and safety of our employees, and accountability
conventional wellbore applications. This customers, and contractors as well as to ■■ policies and objectives
comprehensive offering complements the the protection of the environment in the
existing Schlumberger packer technology communities in which we live and work.
■■ organization and resources
portfolio and includes mechanical-, ■■ contractor and supplier management
wireline-, and hydraulic-set retrievable HSE Management System ■■ risk management
packers, permanent packers, bridge plugs, The Schlumberger HSE Management ■■ business processes
service tools, and accessories. These System defines the principles by which
systems are designed to meet reservoir we conduct our operations worldwide
■■ performance monitoring and improvement
conditions for a wide range of well with regards to health, safety, and the ■■ audits and reviews.
applications and environments. environment.
These are continuously improved by
When a Schlumberger packer is selected, Management communicates the HSE conformance checks
the customer benefits from our expertise, philosophy to all employees, customers, ■■ on day-to-day standards and procedures
our experience, and our commitment contractors, and third parties associated
(controls)
to advanced technologies, quality, and with our business, and each Schlumberger
customer service. Field-proven packers organization must provide positive evidence ■■ on the management system (correction)
help protect the value of assets throughout of conformance to the system. ■■ through modifications to the management
the life of the well. system (improvement).
Introduction 1
Model PMDJ Production Mechanical Packer
Production Mechanical Packer: Product Number 516
MAIN FEATURES Description
■ 10,000-psi maximum working pressure The Model PMDJ packer is a mechanically set retrievable
■ Available for 5½-in casing with 2⅜ EU 8RD production packer featuring two sets of slips to provide a secure
and 2⅞ EU 8RD connections and for 7-in grip. The double “J-setting” system design enables reliable
casing with 2⅞ EU 8RD connections operation in environments of high differential pressures and
temperatures. This packer can support both acid and frac
■ 7-in OD size with 3½ EU 8RD connection
stimulation operations and has applications in oil and gas
is available upon special request
production wells in addition to injection wells due its lack
■ Bypass with bonded seals of dynamic O-rings. The packer can be set in compression,
■ Can be used as semi-permanent packer tension, or neutral.
■ Emergency release system
Setting Operation
Upon attaining desired depth, pull the string upward until the
J-slot is cleared and rotate ½ turn clockwise (right). Apply
8,000 lbf compressive force, then pull the same tension value
upward. Repeat these last two steps to ensure good isolation.
Releasing Operation
Apply 2,000 lbf compressive force, rotate ½ turn clockwise (right)
and pull. For emergency release, pull until the emergency release
pins are sheared.
ØB
ØA
Specifications
Casing Size, Casing Weight, Casing ID, Casing ID, Tool OD, Tool ID, Tool Length, Connection
in [mm] lbm/ft [kg/m] Min., in [mm] Max., in [mm] in [mm] in [mm] in [mm]
13.00–15.50 [19.34–23.06] 4.950 [125.70] 5.044 [128.10] 4.744 [120.50] 2000 [50.80] 50.945 [1,294.00] 2⅜ EU 8RD
5½ [139.70] 15.50–17.00 [23.06–25.06] 4.892 [124.20] 4.950 [125.70] 4.744 [120.50] 2.000 [50.80] 50.945 [1,294.00] 2⅜ EU 8RD
17.00–23.00 [25.06–34.22] 4.670 [118.60] 4.892 [124.20] 4.637 [117.80] 2.000 [50.80] 50.945 [1,294.00] 2⅜ EU 8RD
13.00–15.50 [19.34–23.06] 4.950 [125.70] 5.044 [128.10] 4.744 [120.50] 2.402 [61.00] 50.945 [1,294.00] 2⅞ EU 8RD
5½ [139.70] 15.50–17.00 [23.06–25.06] 4.892 [124.20] 4.950 [125.70] 4.744 [120.50] 2.402 [61.00] 50.945 [1,294.00] 2⅞ EU 8RD
17.00–23.00 [25.06–34.22] 4.670 [118.60] 4.892 [124.20] 4.637 [117.80] 2.402 [61.00] 50.945 [1,294.00] 2⅞ EU 8RD
17.00–20.00 [25.29–29.76] 6.456 [164.00] 6.538 [166.00] 6.267 [159.20] 2.402 [61.00] 47.638 [1,210.00] 2⅞ EU 8RD
7 [177.80] 23.00–26.00 [34.22–38.68] 6.276 [159.40] 6.366 [161.70] 6.078 [154.40] 2.402 [61.00] 47.638 [1,210.00] 2⅞ EU 8RD
26.00–29.00 [38.68–43.15] 6.184 [157.10] 6.276 [159.40] 5.968 [151.60] 2.402 [61.00] 47.638 [1,210.00] 2⅞ EU 8RD
17.00–20.00 [25.29–29.76] 6.456 [164.00] 6.538 [166.00] 6.267 [159.20] 2.992 [76.00] 47.638 [1,210.00] 3½ EU 8RD
7 [177.80] 23.00–26.00 [34.22–38.68] 6.276 [159.40] 6.366 [161.70] 6.078 [154.40] 2.992 [76.00] 47.638 [1,210.00] 3½ EU 8RD
26.00–29.00 [38.68–43.15] 6.184 [157.10] 6.276 [159.40] 5.968 [151.60] 2.992 [76.00] 47.638 [1,210.00] 3½ EU 8RD
Mechanical Packers 3
Model PMP-2 Production Mechanical Packer
Production Mechanical Packer: Product Number 518
MAIN FEATURES Description
■ 7,500-psi maximum working pressure The Model PMP-2 production mechanical packer is a
■ Available with 2⅜ EU 8RD and 3½ EU 8RD mechanically-set double-grip production packer. The segment
tubing connections mechanism in the setting system enables the mechanism not
to be affected by high differential pressures and temperatures.
■ Bypass with V-seals
Packer is set in compression, tension or neutral.
■ Can remain as a production packer
or as a retrievable plug with On-Off Setting Operation
Once at depth, rotate 5–6 turns clockwise (right), at tool´s level
and while placing the tubing to reach weight, set 5,000 lbf and
pull the same quantity. Set 12,000 lbf compression force and pull
the same quantity to leave the packer set and packed.
Releasing Operation
Apply 2,000–3,000 Ibf tension on the string and rotate. When the
loss of tension is perceived, wait for the pressure to equalize, then
pick up to release the packer.
ØB
ØA
Specifications
Casing Size, Casing Weight, Casing ID, Casing ID, Tool OD, Tool ID, Tool Length, Connection
in [mm] lbm/ft [kg/m] Min., in [mm] Max., in [mm] in [mm] in [mm] in [mm]
11.50–15.00 [17.11–22.32] 4.408 [111.90] 4.160 [115.80] 4.244 [107.80] 2.000 [50.80] 54.331 [1,380.00] 2⅜ EU 8RD
5 [127.00]
18.00 [26.78] 4.276 [108.60] 4.408 [111.90] 4.126 [104.80] 2,000 [50.80] 54.331 [1,380.00] 2⅜ EU 8RD
13.00–17.00 [19.34–25.06] 4.892 [124.20] 5.044 [128.10] 4.744 [120.50] 2.402 [61.00] 50.866 [1,292.00] 2⅞ EU 8RD
5½ [139.70]
20.00 [29.76] 4.778 [121.40] 4.892 [124.20] 4.500 [117.80] 2.402 [61.00] 50.866 [1,595.00] 2⅞ EU 8RD
17.00–20.00 [25.29–29.76] 6.456 [164.00] 6.538 [166.00] 6.268 [159.20] 2.402 [61.00] 62.795 [1595.00] 2⅞ EU 8RD
23.00–26.00 [34.22–38.68] 6,276 [159.40] 6.366 [161.70] 6.079 [154.40] 2.402 [61.00] 62.795 [1,595.00] 2⅞ EU 8RD
7 [177.80] 29.00 [43.15] 6.184 [157.10] 6.276 [159.40] 5.969 [151.60] 2.402 [61.00] 62.795 [1,595.00] 2⅞ EU 8RD
32.00 [47.61] 6.094 [154.80] 6.184 [157.10] 5.811 [147.60] 2.402 [61.00] 62.795 [1,595.00] 2⅞ EU 8RD
35.00–38.00 [52.07–56.54] 5.920 [150.40] 6.004 [152.50] 5.657 [143.70] 2.402 [61.00] 62.795 [1,595.00] 2⅞ EU 8RD
Mechanical Packers 5
Model PJT Tension Mechanical Packer
Tension Mechanical Packer: Product Number 502
MAIN FEATURES Description
■ 5,000-psi maximum working pressure The Model PJT tension mechanical packer with “Jay” is
■ 2⅜ EU 8RD and 2⅞ EU 8RD mechanically set and is ideally suited for shallow wells. This
tubing connections economical packer offers simple operation and can be used in
production and injection wells.
■ Simple setting operation
■ Emergency release Setting operation
Once at depth, rotate ½ turn counterclockwise (left), pull the tubing
to 6,000 lbf, leaving the packer set and packed.
Releasing operation
Release tension of the tubing beyond setting point, rotate ½ turn
clockwise (right) and retrieve the tool. For emergency release, pull
until the emergency release pins are sheared.
ØB
ØA
Specifications
Casing Size, Casing Weight, Casing ID, Casing ID, Tool OD, Tool ID, Tool Length, Connection
in [mm] lbm/ft [kg/m] Min., in [mm] Max., in [mm] in [mm] in [mm] in [mm]
11.50–15.00 [17.11–22.32] 4.408 [111.90] 4.160 [115.80] 4.244 [107.80] 1.929 [49.00] 30.433 [773.00] 2⅜ EU 8RD
5 [127.00]
18.00 [26.78] 4.276 [108.60] 4.408 [111.90] 4.126 [104.80] 1.929 [49.00] 30.433 [773.00] 2⅜ EU 8RD
13.00–15.50 [19.34–23.06] 4.949 [125.70] 5.043 [128.10] 4.744 [120.50] 2.000 [50.80] 35.315 [897.00] 2⅜ EU 8RD
5½ [139.70]
15.50–20.00 [23.06–29.76] 4.780 [121.40] 4.949 [125.70] 4.638 [117.80] 2.000 [50.80] 35.315 [897.00] 2⅜ EU 8RD
13.00–15.50 [19.34–23.06] 4.949 [125.70] 5.043 [128.10] 4.744 [120.50] 2.402 [61.00] 36.693 [932.00] 2⅞ EU 8RD
5½ [139.70]
15.50–20.00 [23.06–29.76] 4.780 [121.40] 4.949 [125.70] 4.638 [117.80] 2.402 [61.00] 36.693 [932.00] 2⅞ EU 8RD
17.00–20.00 [25.29–29.76] 6.457 [164.00] 6.535 [166.00] 6.268 [159.20] 2.402 [61.00] 41.260 [1,048.00] 2⅞ EU 8RD
23.00–26.00 [34.22–38.68] 6.276 [159.40] 6.366 [161.70 ] 6.079 [154.40] 2.402 [61.00] 41.260 [1,048.00] 2⅞ EU 8RD
7 [177.80]
29.00 [43.15] 6.185 [157.10] 6.276 [159.40] 5.969 [151.60] 2.402 [61.00] 41.260 [1,048.00] 2⅞ EU 8RD
32.00–35.00 [47.61–52.07] 6.004 [152.50] 6.094 [154.80] 5.811 [147.60] 2.402 [61.00] 41.260 [1,048.00] 2⅞ EU 8RD
9⅝ [244.48] 29.30–36.00 [43.59–53.57] 8.921 [226.60] 9.001 [228.60] 8.590 [218.30] 4.000 [101.60] 54.170 [1,376.00] 4½ EU 8RD
Mechanical Packers 7
Model PJP-2 Mechanical Packer
Mechanical Packer with Hold-Down: Product Number 526
MAIN FEATURES Description
■ 8,000-psi maximum working pressure The Model PJP-2 mechanical packer is a mechanically-set,
■ 2⅞ EU 8RD and 3½ EU 8RD retrievable production packer with double-grip anchoring for well
tubing connections testing. The “Jay” setting mechanism allows for simple operation.
The packer is specifically designed for fracs and squeeze
■ Double-mechanical and hydraulic anchoring
cementing jobs.
■ Protective sleeve for hydraulic hold-downs
Setting Operation
Once at depth, pull 2 in to remove the J-pin and rotate ½ turn
clockwise (right). Apply weight according to procedure.
Releasing Operation
Pull the string up to 2,000 lbf over its weight, wait for
the elastomers to stop packing. Once the packer is unset,
begin retrieval.
ØB
ØA
Specifications
Casing Size, Casing Weight, Casing ID, Casing ID, Tool OD, Tool ID, Tool Length, Connection
in [mm] lbm/ft [kg/m] Min., in [mm] Max., in [mm] in [mm] in [mm] in [mm]
20.00–24.00 [29.76–35.71] – – 6.811 [173.00] 2.402 [61.00] 51.181 [1,300.00] 2⅞ EU 8RD
7⅝ [193.67] 24.00–29.70 [35.71–44.19] 6.875 [174.60] 7.025 [178.40] 6.673 [169.50[ 2.402 [61.00] 51.181 [1,300.00] 2⅞ EU 8RD
33.70–39.00 [50.14–58.03] 6.625 [168.30] 6.765 [171.80] 6.496 [165.00] 2.402 [61.00] 51.181 [1,300.00] 2⅞ EU 8RD
8⅛ [206.37] – – – 7.311 [185.70] 2.402 [61.00] 51.181 [1,300.00] 2⅞ EU 8RD
20.00–28.00 [29.76–41.66] 8.017 [203.60] – 7.780 [197.60] 2.402 [61.00] 51.181 [1,300.00] 2⅞ EU 8RD
8⅝ [219.08] 32.00–40.00 [47.61–59.51] 7.725 [196.20] 7.921 [201.20] 7.531 [191.30] 2.402 [61.00] 51.181 [1,300.00] 2⅞ EU 8RD
40.00–49.00 [59.51–72.91] 7.511 [190.80] 7.725 [196.20] 7.311 [185.70] 2.402 [61.00] 51.181 [1,300.00] 2⅞ EU 8RD
Mechanical Packers 9
Model TM-1 Tandem Mechanical Packer
Tandem Mechanical Packer: Product Number 519
MAIN FEATURES Description
■ 5,000-psi maximum working pressure The Model TM-1 mechanical packer allows for isolation of
■ 2⅜ EU 8RD and 2⅞ tubing EU 8RD several zones using a single anchor at the bottom, by means
tubing connections of a hydraulic or mechanical packer. The Model TM-1 is highly
effective and very robust and can be used in either injection wells
■ Low maintenance cost
or wells in production.
Setting Operation
Before running this tool, set the shearing pins rate and the
correct position of the pin in the J-slot. After anchoring a packer
at the lowest part of the string, pull the tandem according to
the operational procedure.
Unsetting Operation
Release tension, set 500 lbf compressive force, then rotate from
1 to 3 turns clockwise (right) (at tool level). Retrieve the tool.
ØB
ØA
Specifications
Casing Size, Casing Weight, Casing ID, Casing ID, Tool OD, Tool ID, Tool Length, Connection
in [mm] lbm/ft [kg/m] Min., in [mm] Max., in [mm] in [mm] in [mm] in [mm]
13.00–17.00 [19.34 –25.06] 4.890 [124.20] 5.043 [128.10] 4.744 [120.50] 2.000 [50.80] 22.205 [564.00] 2⅜ EU 8RD
5½ [139.70] 20.00 [29.76] 4.780 [121.40] 4.890 [124.20] 4.638 [117.80] 2.000 [50.80] 22.205 [564.00] 2⅜ EU 8RD
23.00 [34.22] 4.669 [118.60] 4.780 [121.40] 4.500 [114.30] 2.000 [50.80] 22.205 [564.00] 2⅜ EU 8RD
13.00–17.00 [19.34–25.06] 4.890 [124.20] 5.043 [128.10] 4.744 [120.50] 2.000 [50.80] 22.205 [564.00] 2⅞ EU 8RD
5½ [139.70] 20.00 [29.76] 4.780 [121.40] 4.890 [124.20] 4.638 [117.80] 2.000 [50.80] 22.205 [564.00] 2⅞ EU 8RD
23.00 [34.22] 4.669 [118.60] 4.780 [121.40] 4.500 [114.30] 2.000 [50.80] 22.205 [564.00] 2⅞ EU 8RD
17.00–20.00 [25.29–29.76] 6.457 [164.00] 6.535 [166.00] 6.268 [159.20] 2.402 [61.00] 22.913 [582.00] 2⅞ EU 8RD
23.00–26.00 [34.22–38.68] 6.276 [159.40] 6.366 [161.70] 6.079 [154.40] 2.402 [61.00] 22.913 [582.00] 2⅞ EU 8RD
7 [177.80]
29.00 [43.15] 6.185 [157.10] 6.276 [159.40] 5.969 [151.60] 2.402 [61.00] 22.913 [582.00] 2⅞ EU 8RD
32.00 [47.61] 6.094 [154.80] 6.185 [157.10] 5.811 [147.60] 2.402 [61.00] 22.913 [582.00] 2⅞ EU 8RD
35.00–38.00 [52.07–56.54] 5.921 [150.40] 6.004 [152.50] 5.657 [143.70] 2.402 [61.00] 22.913 [582.00] 2⅞ EU 8RD
Mechanical Packers 11
Model TM-2 Tandem Mechanical Packer
Tandem Mechanical Packer: Product Number 521
MAIN FEATURES Description
■ 5,000-psi maximum working pressure The Model TM-2 tandem mechanical packer enables isolation
■ 2⅜ EU 8RD and 2⅞ tubing EU 8RD of several zones utilizing its larger packing surfaces. The
tubing connections installation requires that it be run with a hydraulic or mechanical
packer at the lowest part of the string, offering the necessary
■ Large packing surface
anchor to the system. This highly effective and robust packer
■ 5½-in × 61-mm wide passage can be used in injection wells as in production ones.
option available upon special request
Setting Operation
Before running the packer, set the shearing pins rate and
the position of the pin in the J-slot. Then, pull according
to procedure having the lowest packer set as an anchor
for the system.
Unsetting Operation
Release tension, apply 500-lbf compressive force and rotate
from 1 to 3 turns clockwise (right) (at tool level) to retrieve
the tool.
ØB
ØA
Specifications
Casing Size, Casing Weight, Casing ID, Casing ID, Tool OD, Tool ID, Tool Length, Connection
in [mm] lbm/ft [kg/m] Min., in [mm] Max., in [mm] in [mm] in [mm] in [mm]
13.00–17.00 [19.34–25.06] 4.890 [124.20] 5.043 [128.10] 4.744 [120.50] 2.000 [50.80] 29.764 [756.00] 2⅜ EU 8RD
5½ [139.70] 20.00 [29.76] 4.780 [121.40] 4.890 [124.20] 4.638 [117.80] 2.000 [50.80] 29.764 [756.00] 2⅜ EU 8RD
23.00 [34.22] 4.669 [118.60] 4.780 [121.40] 4.500 [114.30] 2.000 [50.80] 29.764 [756.00] 2⅜ EU 8RD
13.00–17.00 [19.345–25.06] 4.890 [124.20] 5.043 [128.10] 4.744 [120.50] 2.000 [50.80] 29.764 [756.00] 2⅞ EU 8RD
5½ [139.70] 20.00 [29.76] 4.780 [121.40] 4.890 [124.20] 4.638 [117.80] 2.000 [50.80] 29.764 [756.00] 2⅞ EU 8RD
23.00 [34.22] 4.669 [118.60] 4.780 [121.40] 4.500 [114.30] 2.000 [50.80] 29.764 [756.00] 2⅞ EU 8RD
17.00–20.00 [25.29–29.76] 6.457 [164.00] 6.535 [166.00] 6.268 [159.20] 2.402 [61.00] 30.402 [772.20] 2⅞ EU 8RD
23.00–26.00 [34.22–38.68] 6.276 [159.40] 6.366 [161.70] 6.079 [154.40] 2.402 [61.00] 30.402 [772.20] 2⅞ EU 8RD
7 [177.80] 29.00 [43.15] 6.185 [157.10] 6.276 [159.40] 5.969 [151.60] 2.402 [61.00] 30.402 [772.20] 2⅞ EU 8RD
32.00 [47.61] 6.094 [154.80] 6.185 [157.10] 5.811 [147.60] 2.402 [61.00] 30.402 [772.20] 2⅞ EU 8RD
35.00–38.00 [52.07–56.54] 5.921 [150.40] 6.004 [152.50] 5.657 [143.70] 2.402 [61.00] 30.402 [772.20] 2⅞ EU 8RD
Hydraulic Packers 13
Model RFH Hydraulic Packer
Hydraulic Packer: Product Number 500
MAIN FEATURES Description
■ 7,500-psi maximum working pressure The Model RFH hydraulic packer is a hydraulically-set hydrostatic
at the bypass when released packer with double grip, featuring slips in the lower section and hold
■ 2⅜ EU 8RD and 2⅞ EU 8RD downs in the upper one. The packer can be retrieved by tension.
tubing connections The Model RFH is useful for oil and gas production wells as well as
for injection ones. The tubing can remain with tension, neutral, or
■ Can remain as a production packer
weight and can be moved selectively.
or as a retrievable plug with On-Off
■ Upper hydraulic hold-downs Setting Operation
■ Release-by-rotation available Select the rated value of the shearing pins, with the purpose of
at special request setting the installation selectively or as a whole in the case of using
multiple packers. Run the packer (with the predetermined string)
with a blank plug or another element for that purpose (according
to installation) to allow pressurization. At the required depth, apply
pressure according to the rated values of the setting pins. Check
the mechanical specifications for correct operational parameters
for weight and tension.
Releasing Operation
Set the string at neutral point and apply tension exceeding the
tubing weight, according to the rate of the shearing ring for this
operation.
ØB
ØA
Specifications
Casing Size, Casing Weight, Casing ID, Casing ID, Tool OD, Tool ID, Tool Length, Connection
in [mm] lbm/ft [kg/m] Min., in [mm] Max., in [mm] in [mm] in [mm] in [mm]
15.00–18.00 [22.32–26.78] 4.276 [108.60] 4.408 [112.00] 4.125 [104.80] 1.978 [50.20] 65.81 [1,671.60] 2⅜ EU 8RD
5 [127.00]
11.50–15.00 [17.11–22.32] 4.408 [112.00] 4.560 [115.80] 4.250 [107.90] 1.978 [50.20] 65.81 [1,671.60] 2⅜ EU 8RD
13.00–15.50 [19.34–23.06 ] 4.949 [125.70] 5.043 [128.10] 4.744 [120.50] 2.000 [50.80] 75.472 [1,917.00] 2⅜ EU 8RD
5½ [139.70] 15.50–20.00 [23.06–29.76] 4.780 [121.40] 4.949 [125.70] 4.638 [117.80] 2.000 [50.80] 75.472 [1,917.00] 2⅜ EU 8RD
20.00–23.00 [29.76–34.22] 4.669 [118.60] 4.780 [121.40] 4.500 [114.30] 2.000 [50.80] 75.472 [1,917.00] 2⅜ EU 8RD
17.00–20.00 [25.29–29.73] 6.457 [164.00] 6.535 [166.00] 6.268 [159.20] 2.402 [61.00] 79.409 [2,017.00] 2⅞ EU 8RD
23.00–26.00 [34.22–38.68] 6.276 [159.40] 6.366 [161.70] 6.079 [154.40] 2.402 [61.00] 79.409 [2,017.00] 2⅞ EU 8RD
7 [177.80] 29.00 [43.15] 6.185 [157.10] 6.276 [159.4 0] 5.969 [151.60] 2.402 [61.00] 79.409 [2,017.00] 2⅞ EU 8RD
32.00 [47.61] 6.094 [154.80] 6.185 [157.10] 5.968 [147.60] 2.402 [61.00] 79.409 [2,017.00] 2⅞ EU 8RD
35.00–38.00 [52.07–56.54] 5.921 [150.40] 6.004 [152.50] 5.657 [143.70] 2.402 [61.00] 79.409 [2,017.00] 2⅞ EU 8RD
40.00–47.00 [59.51–69.93] 8.941 [226.59] 9.001 [228.63] 8.593 [218.30] 2.990 [76.00] 97.75 [2,482.80] 3½ EU 8RD
40.00–47.00 [59.51–69.93] 8.681 [220.50] 8.835 [224.41] 8.437 [214.30] 2.990 [76.00] 97.75 [2,482.80] 3½ EU 8RD
9⅝ [244.48]
47.00–53.50 [69.93–79.60] 8.681 [220.50] 8.835 [224.41] 8.437 [214.30] 2.990 [76.00] 97.75 [2,482.80] 3½ EU 8RD
47.00–53.50 [69.93–79.60] 8.535 [216.79] 8.835 [224.41] 8.218 [208.70] 2.990 [76.00] 97.75 [2,482.80] 3½ EU 8RD
Hydraulic Packers 15
Model PHT Hydraulic Packer
Hydraulic Packer Released by Tension: Product Number 514
MAIN FEATURES Description
■ 7,500-psi maximum working The Model PHT hydraulic packer features double mechanical
differential pressure grip and is hydraulically set, but is retrieved by tension. This
■ Hydraulically set and packed economical and compact packer is designed for all type of
installations. After being set, the tubing can remain with weight,
■ Double mechanical grip
neutral, or in tension. These features ease the packer’s operation.
■ Double isolator element for a larger
packing area Setting Operation
■ Low maintenance cost Prior to running the packer, rate the shearing value of the
calibrated pins, with the purpose of setting the installation
■ Releasing system by tension
selectively or as a whole, should multiple packers be required.
■ 5½-in × 61-mm wide passage Run the packer (with the predetermined string) with a blank plug
option available upon special request or another element for that purpose (according to installation) to
allow pressurization. Upon reaching the required depth, apply
pressure according to the shearing values of the setting pins.
Check the correct operation with weight and tension.
Releasing Operation
Set the string at the neutral point and apply tension over the
tubing weight, according to the rate of the shearing ring for
this operation.
ØB
ØA
Specifications
Casing Size, Casing Weight, Casing ID, Casing ID, Tool OD, Tool ID, Tool Length, Connection
in [mm] lbm/ft [kg/m] Min., in [mm] Max., in [mm] in [mm] in [mm] in [mm]
11.50–15.00 [17.11–22.32] 4.406 [111.90] 4.559 [115.80] 4.244 [107.80] 2.000 [50.80] 50.630 [1,286.00] 2⅜ EU 8RD
5 [127.00]
18.00 [26.78] 4.276 [108.60] 4.406 [111.90] 4.126 [104.80] 2.000 [50.80] 50.630 [1,286.00] 2⅜ EU 8RD
13.00–17.00 [19.34–25.06] 4.890 [124.20] 5.043 [128.10] 4.744 [120.50] 2.000 [50.80] 49.803 [1,265.00] 2⅜ EU 8RD
5½ [139.70]
20.00 [29.76] 4.780 [121.40] 4.890 [124.20] 4.638 [117.80] 2.000 [50.80] 49.803 [1,265.00] 2⅜ EU 8RD
13.00–17.00 [19.34–25.06] 4.890 [124.20] 5.043 [128.10] 4.744 [120.50] 2.402 [61.00] 49.803 [1,265.00] 2⅞ EU 8RD
5½ [139.70]
20.00 [29.76] 4.780 [121.40] 4.890 [124.20] 4.638 [117.80] 2.402 [61.00] 49.803 [1,265.00] 2⅞ EU 8RD
17.00–20.00 [25.29–29.76] 6.457 [164.00] 6.535 [166.00] 6.268 [159.20] 2.402 [61.00] 61.417 [1,560.00] 2⅞ EU 8RD
23.00–26.00 [34.22–38.68] 6.276 [159.40] 6.366 [161.70] 6.079 [154.40] 2.402 [61.00] 61.417 [1,560.00] 2⅞ EU 8RD
7 [177.80] 29.00 [43.15] 6.185 [157.10] 6.276 [159.40] 5.969 [151.60] 2.402 [61.00] 61.417 [1,560.00] 2⅞ EU 8RD
32.00 [47.61] 6.094 [154.80] 6.185 [157.10] 5.811 [147.60] 2.402 [61.00] 61.417 [1,560.00] 2⅞ EU 8RD
35.00–38.00 [52.07–56.54] 5.921 [150.40] 6.004 [152.50] 5.657 [143.70] 2.402 [61.00] 61.417 [1,560.00] 2⅞ EU 8RD
17.00–20.00 [25.29–29.76] 6.457 [164.00] 6.535 [166.00] 6.268 [159.20] 2.992 [76.00] 61.417 [1,560.00] 3½ EU 8RD
23.00–26.00 [34.22–38.68] 6.276 [159.40] 6.366 [161.70] 6.079 [154.40] 2.992 [76.00] 61.417 [1,560.00] 3½ EU 8RD
7 [177.80] 29.00 6.185 [157.10] 6.276 [159.40] 5.969 [151.60] 2.992 [76.00] 61.417 [1,560.00] 3½ EU 8RD
32.00 6.094 [154.80] 6.185 [157.10] 5.811 [147.60] 2.992 [76.00] 61.417 [1,560.00] 3½ EU 8RD
35.00–40.00 [52.07–59.51] 5.921 [150.40] 6.004 [152.50] 5.657 [143.70] 2.992 [76.00] 61.417 [1,560.00] 3½ EU 8RD
Hydraulic Packers 17
Model PHJ Hydraulic Packer
Hydraulic Packer: Product Number 529
MAIN FEATURES Description
■ 6,000-psi maximum working differential The Model PHJ hydraulic packer is a double mechanical grip
pressure in 5½-in casing packer that is hydraulically set and recovered by tension and
■ Hydraulically set and packed rotation. Due to its design with telescopic mandrel, it can be used
in many types of installations, especially selective ones, so when
■ Telescopic mandrel (split mandrel, J-lock)
retrieving the whole system there is not any tension stack. After
■ Double mechanical grip being set, the packer can be set in compression, tension, or neutral.
■ Double-isolator element for a larger These advantages allow ease of operation.
packing area
Setting Operation
■ Straight pull or rotational release
Rate the shearing value of the calibrated pins, with the purpose
■ Low maintenance cost of setting the installation selectively or as a whole in the case
of using multiple packers. Lower the Model PHJ packer with the
predetermined string, with a blank plug or another element for that
purpose, according to installation, to allow pressurization. At the
required depth, apply pressure according to the shearing values of
the setting pins. After this, repack it with 2,800 psi (see table).
Releasing Operation
Set the string to the neutral point, rotate ¼ turn clockwise (right)
and lift approximately 30 cm to lock the pin in the “Jay” in the
unset position.
ØB
ØA
Specifications
Casing Size, Casing Weight, Casing ID, Casing ID, Tool OD, Tool ID, Tool Length, Connection
in [mm] lbm/ft [kg/m] Min., in [mm] Max., in [mm] in [mm] in [mm] in [mm]
13.00–17.00 [19.34–25.063] 4.890 [124.20] 5.043 [128.10] 4.744 [120.50] 2.000 [50.80] 59.055 [1,500.00] 2⅜ EU 8RD
5½ [139.70]
20.00 [29.76] 4.780 [121.40] 4.890 [124.20] 4.638 [117.80] 2.000 [50.80] 59.055 [1,500.00] 2⅜ EU 8RD
Hydraulic Packers 19
Model PHJ-A Hydraulic Packer
Hydraulic Packer: Product Number 536
MAIN FEATURES. Description
■ 4,000-psi maximum working differential This Model PHJ-A hydraulic packer, utilizing double mechanical
pressure in 5½-in casing and 8,500-psi grip and hydraulic setting, can be retrieved either by pulling or
in 7-in casing rotating the string. The Model PHJ-A packer can be used in all
■ Can be set in compression, tension, types of installations, but is primarily used in selective water
or neutral injection wells where many zones require isolation. The two-piece
telescoping mandrel allows adequate clearance to collapse the
■ Can be retrieved by rotating and pulling
slips and elements before loading the packer immediately below
the string
it. When it is necessary to retrieve many packers in the same
■ Hydraulically set and packed string, a tension stack is avoided. The Model PHJ-A packer can
■ Telescopic mandrel (split mandrel be set in compression, tension, or neutral.
with J-lock)
Setting Procedure.
■ Double mechanical grip
Previously, you must select the shearing pins rate, in order to
■ Double packing elements set the packers in a selective way or altogether in just one single
■ Release system by pulling or rotating operation. Run the Model PHJ-A packer in a predetermined string
■ Low maintenance cost with a plug at the bottom, so that it can be pressurized. Upon
reaching the required setting depth, pressurize the string according
to the shearing rate, then pack it with 2,800 psi.
Release Procedure.
Determine where the neutral point of the string is, rotate ¼ turn
clockwise (right) and lift approximately 30 cm, in order to lock the
J-slot pin in the safe position.
ØB
ØA
Specifications
Casing Size, Casing Weight, Casing ID, Casing ID, Tool OD, Tool ID, Tool Length, Connection
in [mm] lbm/ft [kg/m] Min., in [mm] Max., in [mm] in [mm] in [mm] in [mm]
13.00–17.00 [19.34–25.06] 4.890 [121.20] 5.043 [128.10] 4.744 [120.50] 2.402 [61.00] 61.575 [1,564.00] 2⅞ EU 8RD
5½ [139.70]
20.00 [29.76] 4.780 [121.40] 4.890 [124.20] 4.638 [117.80] 2.402 [61.00] 61.575 [1,564.00] 2⅞ EU 8RD
17.00–20.00 [25.29–29.76] 6.457 [164.00] 6.535 [166.00] 6.264 [159.10] 2.402 [61.00] 65.551 [1,665.00] 2⅞ EU 8RD
23.00–26.00 [34.22–38.68] 6.276 [159.40] 6.366 [161.70] 6.079 [154.40] 2.402 [61.00] 65.551 [1,665.00] 2⅞ EU 8RD
7 [177.80] 29.00 [43.15] 6.185 [157.10] 6.276 [159.40] 5.969 [151.60] 2.402 [61.00] 65.551 [1,665.00] 2⅞ EU 8RD
32.00 [47.62] 6.094 [154.80] 6.185 [157.10] 5.811 [147.60] 2.402 [61.00] 65.551 [1,665.00] 2⅞ EU 8RD
35.00–38.00 [52.07–56.54] 5.921 [150.40] 6.004 [152.50] 5.654 [143.60] 2.402 [61.00] 65.551 [1,665.00] 2⅞ EU 8RD
Hydraulic Packers 21
Model PHR-2 Hydraulic Packer
Hydraulic Packer Released by Rotation: Product Number 517
MAIN FEATURES Description
■ 7,500-psi maximum working The Model PHR-2 hydraulic packer is a compact, cost-effective,
differential pressure hydraulically-set, rotation-release packer that is designed for
■ Double packing element many types of installations. After being set, it can remain with
weight, neutral or tension, which makes the tubing movement
■ Hydraulically set and packed
easier. These features make the tool easy to operate.
■ Rotation release
■ Low maintenance cost Setting Operation
Rate the shearing value of the calibrated pins, with the purpose
of setting the installation selectively or as a whole in the case of
using multiple packers. Lower the PHR-2 hydraulic packer with
the predetermined string, with a blank plug or another element for
that purpose (according to installation) to allow pressurization.
Get to the required depth and apply pressure according to the
shearing values of the setting pins.
Releasing Operation
Set the tubing to neutral point, pull with ±2,000 lbf and rotate the
string from 5 to 6 turns clockwise (right). The tool releases once
tension is removed.
ØB
ØA
Specifications
Casing Size, Casing Weight, Casing ID, Casing ID, Tool OD, Tool ID, Tool Length, Connection
in [mm] lbm/ft [kg/m] Min., in [mm] Max., in [mm] in [mm] in [mm] in [mm]
11.50–15.00 [17.11–22.32] 4.406 [111.90] 4.559 [115.80] 4.244 [107.80] 2.000 [50.80] 50.059 [1,271.50] 2⅜ EU 8RD
5 [127.00]
18.00 [26.78] 4.276 [108.60] 4.406 [111.90] 4.126 [104.80] 2.000 [50.80] 50.059 [1,271.50] 2⅜ EU 8RD
13.00–17.00 [19.34–25.06] 4.890 [124.20] 5.043 [128.10] 4.744 [120.50] 2.000 [50.80] 53.071 [1,348.00] 2⅜ EU 8RD
5½ [139.70]
20.00 [29.76] 4.780 [121.40] 4.890 [124.20] 4.638 [117.80] 2.000 [50.80] 53.071 [1,348.00] 2⅜ EU 8RD
13.00–17.00 [19.34–25.06] 4.890 [124.20] 5.043 [128.10] 4.744 [120.50] 2.402 [61.00] 51.929 [1,319.00] 2⅞ EU 8RD
5½ [139.70]
20.00 [29.76] 4.780 [121.40] 4.890 [124.20] 4.638 [117.80] 2.402 [61.00] 51.929 [1,319.00] 2⅞ EU 8RD
17.00–20.00 [25.29–29.76] 6.457 [164.00] 6.535 [166.00] 6.268 [159.20] 2.402 [61.00] 56.260 [1,429.00] 2⅞ EU 8RD
23.00–26.00 [34.22 - 38.68] 6.276 [159.40] 6.366 [161.70] 6.079 [154.40] 2.402 [61.00] 56.260 [1,429.00] 2⅞ EU 8RD
7 [177.80] 29.00 [43.15] 6.185 [157.10] 6.276 [159.40] 5.969 [151.60] 2.402 [61.00] 56.260 [1,429.00] 2⅞ EU 8RD
32.00 [47.61] 6.094 [154.80] 6.185 [157.10] 5.811 [147.60] 2.402 [61.00] 56.260 [1,429.00] 2⅞ EU 8RD
35.00–38.00 [52.07–56.54] 5.921 [150.40] 6.004 [152.50] 5.657 [143.70] 2.402 [61.00] 56.260 [1,429.00] 2⅞ EU 8RD
17.00–20.00 [25.29–29.76] 6.457 [164.00] 6.535 [166.00] 6.268 [159.20] 2.992 [76.00] 54.685 [1,389.00] 3½ EU 8RD
23.00–26.00 [34.22–38.68] 6.276 [159.40] 6.366 [161.70] 6.079 [154.40] 2.992 [76.00] 54.685 [1,389.00] 3½ EU 8RD
7 [177.80] 29.00 [43.15] 6.185 [157.10] 6.276 [159.40] 5.969 [151.60] 2.992 [76.00] 54.685 [1,389.00] 3½ EU 8RD
32.00 [47.61] 6.094 [154.80] 6.185 [157.10] 5.811 [147.60] 2.992 [76.00] 54.685 [1,389.00] 3½ EU 8RD
35.00–38.00 [52.07–56.54] 5.921 [150.40] 6.004 [152.50] 5.66 [143.70] 2.992 [76.00] 54.685 [1,389.00] 3½ EU 8RD
Hydraulic Packers 23
Model THT Tandem Hydraulic Packer
Tandem Hydraulic Packer: Product Number 504
MAIN FEATURES Description
■ Double packing element for larger seal area The Model THT tandem hydraulic packer is a compact, cost-
■ Hydraulically set and packed effective packer featuring hydraulic setting and straight-pull
release. Designed for selective installations and after being
■ Straight-pull release
set, can remain with weight, neutral or tension allowing easier
■ Circulation bypass when releasing tubing movement. These advantages make the Model THT
■ No extra forces when releasing tandem packer easy to operate.
■ Low maintenance cost
Setting Operation
■ 5½-in × 61-mm wide passage Rate the shearing value of the calibrated pins, with the purpose
option available upon special request of setting the installation selectively or as a whole in the case
of using multiple packers. Lower the Model THT with the
predetermined string and a double grip packer with a blank plug
to pressurize it. Get to the required depth and apply pressure
according to the shearing values of the setting pins.
Releasing Operation
To release the packer, pull the string to shear the pins on the
packer.
ØB
ØA
Specifications
Casing Size, Casing Weight, Casing ID, Casing ID, Tool OD, Tool ID, Tool Length, Connection
in [mm] lbm/ft [kg/m] Min., in [mm] Max., in [mm] in [mm] in [mm] in [mm]
13.00–17.00 [19.34–25.06] 4.890 [124.20] 5.043 [128.10] 4.744 [120.50] 2.000 [50.80] 21.339 [542.00] 2⅜ EU 8RD
5½ [139.70]
20.00 [29.76] 4.780 [121.40] 4.890 [124.20] 4.638 [117.80] 2.000 [50.80] 21.339 [542.00] 2⅜ EU 8RD
13.00–17.00 [19.34–25.06] 4.890 [124.20] 5.043 [128.10] 4.744 [120.50] 2.402 [61.00] 37.126 [943.00] 2⅞ EU 8RD
5½ [139.70]
20.00 [29.76] 4.780 [121.40] 4.890 [124.20] 4.638 [117.80] 2.402 [61.00] 37.126 [943.00] 2⅞ EU 8RD
17.00–20.00 [25.29–29.76] 6.457 [164.00] 6.535 [166.00] 6.268 [159.20] 2.402 [61.00] 37.205 [945.00] 2⅞ EU 8RD
23.00–26.00 [34.22–38.68] 6.276 [159.40] 6.366 [161.70] 6.079 [154.40] 2.402 [61.00] 37.205 [945.00] 2⅞ EU 8RD
7 [177.80] 29.00 [43.15] 6.185 [157.10] 6.276 [159.40] 5.969 [151.60] 2.402 [61.00] 37.205 [945.00] 2⅞ EU 8RD
32.00 [47.61] 6.094 [154.80] 6.185 [157.10] 5.811 [147.60] 2.402 [61.00] 37.205 [945.00] 2⅞ EU 8RD
35.00–38.00 [52.07–56.54] 5.921 [150.40] 6.004 [152.50] 5.657 [143.70] 2.402 [61.00] 37.205 [945.00] 2⅞ EU 8RD
17.00–20.00 [25.29–29.76] 6.457 [164.00] 6.535 [166.00] 6.268 [159.20] 2.992 [76.00] 39.213 [996.00] 3½ EU 8RD
23.00–26.00 [34.22–38.68] 6.276 [159.40] 6.366 [161.70] 6.079 [154.40] 2.992 [76.00] 39.213 [996.00] 3½ EU 8RD
7 [177.80] 29.00 [43.15] 6.185 [157.10] 6.276 [159.40] 5.969 [151.60] 2,992 [76.00] 39.213 [996.00] 3½ EU 8RD
32.00 [47.61] 6.094 [154.80] 6.185 [157.10] 5.811 [147.60] 2.992 [76.00] 39.213 [996.00] 3½ EU 8RD
35.00–38.00 [52.07–56.54] 5.921 [150.40] 6.004 [152.50] 5.657 [143.70] 2.992 [76.00] 39.213 [996.00] 3½ EU 8RD
Hydraulic Packers 25
Model THT Tandem Hydraulic Packer
Tandem Hydraulic Packer with Hold-Down: Product Number 507
MAIN FEATURES Description
■ Double packing element (larger seal area) The Model THT tandem hydraulic packer features compact design,
■ Hydraulically set and packed cost-effective operation, hydraulic setting, and straight-pull release.
Designed for selective installations, the Model THT can remain
■ Upper hold downs to compensate for any
set with weight, neutral, or tension, making the tubing movement
differential pressure from below, allowing
easier. The Model THT packer is easy to operate.
the packer to stand upward forces in
the annulus Setting Operation
■ Circulation bypass when releasing Rate the shearing value of the calibrated pins, with the purpose
■ Straight pull release of setting the installation selectively or as a whole (in instances
requiring multiple packers). Lower the THT with the predetermined
■ No extra forces when releasing,
string and a double grip packer with a blank plug to pressurize it. Get
due to its parted mandrel
to the required depth and apply pressure according to the shearing
■ Low maintenance cost values of the setting pins (see table).
■ 61-mm wide passage option available
upon special request Releasing Operation
Pull the string over the shearing force of the rated pins (plus the
■ Optional elastomeric or string weight). Repeat the procedure for any additional packers.
non-elastomeric seals
ØB
ØA
Specifications
Casing Size, Casing Weight, Casing ID, Casing ID, Tool OD, Tool ID, Tool Length, Connection
in [mm] lbm/ft [kg/m] Min., in [mm] Max. , in [mm] in [mm] in [mm] in [mm]
13.00–17.00 [19.34–25.06] 4.890 [124.20] 5.043 [128.10] 4.744 [120.50] 2.000 [50.80] 21.339 [542.00] 2⅜ EU 8RD
5½ [139.70]
20.00 [29.76] 4.780 [121.40] 4.890 [124.20] 4.638 [117.80] 2.000 [50.80] 21.339 [542.00] 2⅜ EU 8RD
13.00–17.00 [19.34–25.06] 4.890 [124.20] 5.043 [128.10] 4.744 [120.50] 2.402 [61.00] 37.126 [943.00] 2⅞ EU 8RD
5½ [139.70]
20.00 [29.76] 4.780 [121.40] 4.890 [124.20] 4.638 [117.80] 2.402 [61.00] 37.126 [943.00] 2⅞ EU 8RD
17.00–20.00 [25.29–29.76] 6.457 [164.00] 6.535 [166.00] 6.268 [159.20] 2.402 [61.00] 37.205 [945.00] 2⅞ EU 8RD
23.00–26.00 [34.22–38.68] 6.276 [159.40] 6.366 [161.70] 6.079 [154.40] 2.402 [61.00] 37.205 [945.00] 2⅞ EU 8RD
7 [177.80] 29.00 [43.15] 6.185 [157.10] 6.276 [159.40] 5.969 [151.60] 2.402 [61.00] 37.205 [945.00] 2⅞ EU 8RD
32.00 [47.61] 6.094 [154.80] 6.185 [157.10] 5.811 [147.60] 2.402 [61.00] 37.205 [945.00] 2⅞ EU 8RD
35.00–38.00 [52.07–56.54] 5.921 [150.40] 6.004 [152.50] 5.657 [143.70] 2.402 [61.00] 37.205 [945.00] 2⅞ EU 8RD
Hydraulic Packers 27
Model THJ Tandem Hydraulic Packer
Tandem Hydraulic Packer: Product Number 533
MAIN FEATURES Description
■ 6,000-psi maximum working differential The Model THJ tandem hydraulic packer is hydraulically set,
pressure in 5½-in casing allows straight pull-and-rotate release, and is designed for
■ Hydraulically set and packed selective installations. The telescopic mandrel helps avoid
extra tension forces while retrieving. The packer can be set
■ Telescopic mandrel (split mandrel, J-lock)
in compression, tension, or neutral. This make this packer an
■ Double-mechanical grip excellent option.
■ Double-isolator element
(larger packing area) Setting Operation
Rate the shearing value of the calibrated pins, with the purpose
■ Straight pull-and-rotate release (J-lock)
of setting the installation selectively or as a whole in the case of
■ Low maintenance cost using multiple packers. Lower the Model THJ packer with the
predetermined string, with a blank plug or other element for that
purpose to allow pressurization, according to installation. At the
required depth, apply pressure according to the shearing values
of the setting pins. After setting, repack with 2,800 psi (see table).
Releasing Operation
Set the string to the neutral point, rotate ¼ turn clockwise (right)
and lift approximately 30 cm to lock the pin in the ”Jay” in the
unset position.
ØB
ØA
Specifications
Casing Size, Casing Weight, Casing ID, Casing ID, Tool OD, Tool ID, Tool Length, Connection
in [mm] lbm/ft [kg/m] Min., in [mm] Max., in [mm] in [mm] in [mm] in [mm]
13.00–17.00 [19.34–25.06] 4.890 [124.20] 5.043 [128.10] 4.744 [120.50] 2.000 [50.80] 50.629 [1,286.00] 2⅜ EU 8RD
5½ [139.70]
20.00 [29.76] 4.780 [121.40] 4.890 [124.20] 4.500 [114.30] 2.000 [50.80] 50.629 [1,286.00] 2⅜ EU 8RD
13.00–17.00 [19.34–25.06] 4.890 [124.20] 5.043 [128.10] 4.744 [120.50] 2.402 [61.00] 50.629 [1,286.00] 2⅞ EU 8RD
5½ [139.70]
20.00 [29.76] 4.780 [121.40] 4.890 [124.20] 4.500 [114.30] 2.402 [61.00] 50.629 [1,286.00] 2⅞ EU 8RD
Cup Packers 29
Model TC-1 Cup Packer
Product Number 510
MAIN FEATURES Description
■ 5,000-psi maximum working pressure The Model TC-1 cup packer is a tandem packer used in selective
■ 2⅜ EU 8RD, 2⅞ EU 8RD, and 3½ EU 8RD installations for injection wells. The cup is specifically designed
tubing connections to avoid pulling on the tubing joints. The packer enables running
the required amount of packers, depending upon the zones to
■ Packing direction of the cup can be inverted
be injected.
■ String operation not required for packing
or retrieval of the installation
■ Low maintenance cost
ØB
ØD ØA
Specifications
Casing Size, Casing Casing ID, Casing ID, Tool OD, Tool ID, Tool Packer Connection
in [mm] Weight, Min., Max., in [mm] in [mm] Length, OD,
lbm/ft [kg/m] in [mm] in [mm] in [mm] in [mm]
13.00–15.50 4.949 5.043 5.091 2.008 18.110 4.685
2⅜ EU 8RD
[19.34–23.06] [125.70] [128.10] [129.30] [51.00] [460.00] [119.00]
5½ [139.70]
15.50–17.00 4.890 4.949 5.024 2.008 18.110 4.685
2⅜ EU 8RD
[23.06–25.06] [124.20] [125.70] [127.60] [51.00] [460.00] [119.00]
17.00–23.00 6.366 6.535 6.520 2.008 18.110 5.969
2⅜ EU 8RD
[25.29–34.22] [161.70] [166.00] [165.60] [51.00 [460.00] [151.60]
7 [177.80]
26.00–29.00 6.185 6.276 6.315 2.008 18.110 5.969
2⅜ EU 8RD
[38.68–43.15] [157.10] [159.40] [160.40] [51.00] [460.00] [151.60]
13.00–15.50 4.949 5.043 5.091 2.402 18.110 4.685
2⅞EU 8RD
[19.34–23.06] [125.70] [128.10] [129.30] [61.00] [460.00] [119.00]
5½ [139.70]
15.50–17.00 4.890 4.949 5.024 2.402 18.110 4.685
2⅞EU 8RD
[23.06–25.06] [124.20] [125.70] [127.60] [61.00] [460.00] [119.00]
17.00 –23.00 6.366 6.535 6.520 2.402 18.110 5.969
2⅞EU 8RD
[25.29–34.22] [161.70] [166.00] [165.60] [61.00] [460.00] [151.60]
7 [177.80]
26.00–29.00 6.185 6.276 6.315 2.402 18.110 5.969
2⅞EU 8RD
[38.68 –43.15] [157.10] [159.40] [160.40] [61.00] [460.00] [151.60]
17.00–23.00 6.366 6.535 6.520 2.992 20.669 5.969
3½ EU 8RD
[25.29–34.22] [161.70] [166.00] [165.60] [76.00] [525.00] [151.60]
7 [177.80]
26.00–29.00 6.185 6.276 6.315 2.992 20.669 5.969
3½ EU 8RD Model TC-1 cup packers.
[38.68 –43.15] [157.10] [159.40] [160.40] [76.00] [525.00] [151.60]
ØB
ØD ØA
Specifications
Casing Size, Casing Casing ID, Casing ID, Tool OD, Tool ID, Tool Packer Connection
in [mm] Weight, Min., Max., in [mm] in [mm] Length, OD,
lbm/ft [kg/m] in [mm] in [mm] in [mm] in [mm]
13.00–15.50 4.949 5.043 5.091 2.008 18.110 4.685
2⅜ EU 8RD
[19.34–23.06] [125.70] [128.10] [129.30] [51.00] [460.00] [119.00]
5½ [139.70]
15.50–17.00 4.890 4.949 5.024 2.008 18.110 4.685
2⅜ EU 8RD
[23.06–25.06] [124.20] [125.70] [127.60] [51.00] [460.00] [119.00]
17.00–23.00 6.366 6.535 6.520 2.008 18.110 5.969
2⅜ EU 8RD
[25.29–34.22] [161.70] [166.00] [165.60] [51.00] [460.00] [151.60]
7 [177.80]
26.00–29.00 6.185 6.276 6.315 2.008 18.110 5.969
2⅜ EU 8RD
[38.68–43.15] [157.10] [159.40] [160.40] [51.00] [460.00] [151.60]
13.00–15.50 4.949 5.043 5.091 2.402 18.110 4.685
2⅞ EU 8RD
[19.34–23.06] [125.70] [128.10] [129.30] [61.00] [460.00] [119.00]
5½ [139.70]
15.50–17.00 4.890 4.949 5.024 2.402 18.110 4.685
2⅞ EU 8RD
[23.06–25.06] [124.20] [125.70] [127.60] [61.00] [460.00] [119.00]
17.00–23.00 6.366 6.535 6.520 2.402 18.110 5.969
2⅞ EU 8RD
[25.29–34.22] [161.70] [166.00] [165.60] [61.00] [460.00] [151.60]
7 [177.80]
26.00–29.00 6.185 6.276 6.315 2.402 18.110 5.969
2⅞ EU 8RD
[38.68–43.15] [157.10] [159.40] [160.40] [61.00] [460.00] [151.60]
17.00–23.00 6.366 6.535 6.520 2.992 20.669 5.969
3½ EU 8RD
[25.29–34.22] [161.70] [166.00] [165.60] [76.00] [525.00] [151.60]
7 [177.80]
26.00–29.00 6.185 6.276 6.315 2.992 20.669 5.969
3½ EU 8RD
[38.68–43.15] [157.10] [159.40] [160.40] [76.00] [525.00] [151.60]
Cup Packers 31
Model PCP Automatic “J” Cup Packer
Automatic “J” Cup Packer: Product Number 524
MAIN FEATURES Description
■ 5,000-psi maximum working pressure The Model PCP automatic “J” cup packer is Mechanical set weight
■ 2⅜ EU 8RD, 2⅞ EU 8RD and 3½ EU 8RD packer with automatic “Jay” especially designed for use with
tubing connections flexible tubing (coiled tubing) in production tests. Cost-effective and
easy to operate.
■ Simple setting operation
Operation Mode
Utilizing the automatic “Jay”, the Model PCP is operated with
reciprocal movements both when setting the packer and when
releasing it.
ØB
ØD ØA
PCP automatic
“J” cup packer.
ØB
ØA ØD
Cup Packers 33
Model RON-OFF On-Off Connector
On-Off Connector: Product Number 600
MAIN FEATURES Description
■ 7,500-psi working pressure The Model RON-OFF On-Off connector, utilizing a “J” system
■ 2⅜ EU 8RD and 2⅞ tubing EU 8RD enable disconnections and reconnections of the tubing without
tubing connections adversely affecting the installation’s performance. The connector is
ideal when multiple connects and disconnects are necessary during
■ Cut profile according to customer need
an operation.
■ Low maintenance cost
Operation Mode
Once the packer is anchored at depth, apply 500-lbf compressive
force and rotate ½ turn counterclockwise (left) at tool depth;
disconnect and lift the string. To connect, run the connector
sleeve to the fishing point (connector pin) and apply 1,000-lbf
compressive force.
ØB
ØA
Specifications
Casing Size, Casing Weight, Casing ID, Casing ID, Tool OD, Tool ID, Tool Length, Connection
in [mm] lbm/ft [kg/m] Min., in [mm] Max., in [mm] in [mm] in [mm] in [mm]
4½ [114.30] N/A 3.921 [99.60] 4.091 [103.90] 3.740 [95.00] 2.000 [50.80] 33.661 [855.00] 2⅜ EU 8RD
5 [127.00] N/A 4.276 [108.60 ] 4.559 [115.80] 4.000 [101.60] 2.000 [50.80] 33.661 [855.00] 2⅜ EU 8RD
5½ [139.70] N/A 4.669 [118.60] 5.043 [128.10] 4.504 [114.40] 2.000 [50.80] 33.661 [855.00] 2⅜ EU 8RD
5½ [139.70] N/A 4.669 [118.60] 5.043 [128.10] 4.606 [117.00] 2.402 [61.00] 37.795 [960.00] 2⅞ EU 8RD
7 [177.80] N/A 5.921 [150.40] 6.535 [166.00] 5.500 [139.70] 2.402 [61.00] 37.795 [960.00] 2⅞ EU 8RD
On-Off Connectors 35
Model OMJ Automatic On-Off Connector
On-Off Connector: Product Number 616
MAIN FEATURES Description
■ 10,000-psi working pressure The Model OMJ automatic On-Off connector is specifically designed
■ 150,000-lbf maximum operation tension to be run in strings with multiple packers when setting by rotation is
not an option. Highly suited for deviated wells, the packer is simple to
■ Operation by reciprocal movements
operated, cost effective and dependable.
■ Cut profile according to customer need
■ 50.8-mm and 61-mm inner passage Operation Mode
Once in depth and with a packer set, apply compressive force (as
■ Low maintenance cost
programmed) to shear the safety pins. When the string is lifted, the
Model OMJ will disconnect. To reconnect, set 2,000-lbf compressive
force and so on. With three additional movements, the complete
rotation of the system is finished.
ØB
ØA
Specifications
Casing Size, Casing Weight, Casing ID, Casing ID, Tool OD, Tool ID, Tool Length, Connection
in [mm] lbm/ft [kg/m] Min., in [mm] Max., in [mm] in [mm] in [mm] in [mm]
5½ [139.70] N/A 4.669 [118.60] 5.043 [128.10] 4.500 [114.30] 2.008 [51.00] 40.748 [1,035.00] 2⅜ EU 8RD
5½ [139.70] N/A 4.669 [118.60] 5.043 [128.10] 4.567 [116.00] 2.402 [61.00] 41.614 [1,057.00] 2⅞ EU 8RD
7 [177.80] N/A 5.921 [150.40] 6.535 [166.00] 5.500 [139.70] 2.402 [61.00] 41.614 [1,057.00] 2⅞ EU 8RD
On-Off Connectors 37
Model RCMD Sliding Sleeve
Sliding Sleeve: Product Number 656
MAIN FEATURES Description
■ 10,000-psi maximum working pressure The Model RCMD sliding sleeve allows communication in between
■ 2⅜ EU 8RD and 2⅞ EU 8RD the tubing and the annular space to selectively circulate or produce
tubing connections the zones.
■ Easy opening and closing operation Operation Mode
■ Low maintenance cost To open the sleeve, run a B-type shifting tool and jar downwards
■ Optional R, F, or X profiles till the sleeve is shifted. To close the sleeve, run a B-type shifting
tool through the tool and jar upwards till the sleeve is shifted.
■ Optional elastomeric or
non-elastomeric seals
■ Optional premium threads
ØB
ØA
Specifications
Casing Size, Casing Weight, Casing ID, Casing ID, Tool OD, Tool ID, Tool Length, Connection
in [mm] lbm/ft [kg/m] Min., in [mm] Max., in [mm] in [mm] in [mm] in [mm]
5 [127.00] N/A 4.276 [108.60] 4.559 [115.80] 3.079 [78.20] 1.874 [47.60] 48.661 [1,236.00] 2⅜ EU 8RD
5½ [139.70] N/A 4.669 [118.60] 5.043 [128.10] 3.748 [95.20] 2.311 [58.70] 48.661 [1,236.00] 2⅞ EU 8RD
Sliding Sleeves 39
Model CSM Circulating Sleeve
Circulating Sleeve with Mechanical Opening: Product Number 418
MAIN FEATURES Description
■ 10,000-psi maximum working pressure The Model CSM circulating sleeve allows complete circulation.
■ 2⅞ EU 8RD and 3½ EU 8RD The Model CSM is easily operated by applying tension to open
tubing connections and compressive force for its closing. The circulation sleeve
can be opened or closed repeatedly as required and allows an
■ Easy opening and closing operation
unrestricted flow passage when in the open position. The Model
■ No wireline equipment required CSM allows total transmission of the torque when packers must
for operation be operated. Applications include equalization and circulation over
■ Low maintenance cost packers that are designed to allow pulling.
Operation Mode
Apply downward force on the tool to shear pins according to the
shearing table. Rotate the tubing ⅛ turn clockwise (right) at desired
tool depth, while maintaining a slight torque, and lift the tubing
slowly until tension is acquired again. Tool is completely open to
allow full circulation.
To close the tool, apply downward force and rotate the tubing ⅛
turn counterclockwise (left). Lift the tubing slowly until tubing is
again under tension.
ØB
ØA
Specifications
Profile Tool OD, Tool ID, Tool Length, Connection
in [mm] in [mm] in [mm] in [mm]
2⅞ [73.00 ] 4.331 [110.00] 2.44 [62.00] 24.724 [628.00] 2⅞ EU 8RD
3½ [88.90] 5.354 [136.00] 2.992 [76.00] 35.118 [892.00] 3½ EU 8RD
Sliding Sleeves 41
Model CSH Hydraulic Opening Circulation Sleeve
Hydraulic Opening Circulation Sleeve: Product Number 418
MAIN FEATURES Description
■ 10,000-psi maximum working The Model CSH hydraulic opening circulation sleeve is designed to
differential pressure be used in wells when communication between the tubing and
■ Opening valve with fishing point the annulus is required for normal well circulation. The Model
CSH sleeve’s hydraulic opening mechanism is not affected by the
■ Heat-treated alloy steel construction
differential pressure applied to the tubing, when the opening valve
■ Anti-corrosive coating as epoxy or nickel has not been introduced.
plating when required
■ Low maintenance cost Operation of the Model CSH is simple. The valve has rated shearing
pins that, once cut by direct differential pressure, allow free
circulation inside the tubing.
Operation Mode
When opening is required, fill the tubing (to avoid an abrupt impact
of the ball on the sliding sleeve valve seat), then drop the valve.
Taking this into account, obtain ±10% of the shearing pins value,
according to the rated shearing table.
Once the check valve has seated, pressurize the tubing to achieve
the necessary pressure to shear the pins and open the sleeve,
thereby allowing communication to the annulus.
Note: If the tubing cannot be filled, the shearing value of the pin will
be inaccurate and will need to be taken into account. The fatigue of
the shearing pins produced by the high impact on the tool is changed
when the well has no fluid level.
ØB
ØA
Specifications
Profile Tool OD, Tool ID, Tool Length, Connection
in [mm] in [mm] in [mm] in [mm]
2⅞ [73.00] 3.858 [98.00] 2.122 [53.90] 24.566 [624.00] 2⅞ EU 8RD
Sliding Sleeves 43
Model RR Nipple with “No-Go” Profile
Nipple with “No-Go” Profile: Product Number 653
C
ØB
ØA
Specifications
Tool Profile, Tool ID, Tool ID, Tool Length, Connection
in [mm] in [mm] in [mm] in [mm]
3.063 [77.80] 1.811 [46.00] 11.024 [280.00] 2⅜ EU 8RD
1.812 [46.02]
3.669 [93.20] 1.811 [46.00] 11.890 [302.00] 2⅞ EU 8RD
1.875 [47.63] 3.063 [77.80] 1.874 [47.60] 11.024 [280.00] 2⅜ EU 8RD
2.250 [57.15] 3.748 [95.20] 2.248 [57.10] 12.244 [311.00] 2⅞ EU 8RD
2.312 [58.73] 3.748 [95.20] 2.311 [58.70] 12.244 [311.00] 2⅞ EU 8RD
2.750 [69.85] 4.500 [114.30] 2.752 [69.90] 13.386 [340.00] 3½ EU 8RD
2.812 [71.43] 4.500 [114.30] 2.811 [71.40] 13.386 [340.00] 3½ EU 8RD
ØB
ØA
Specifications
Tool Profile, Tool ID, Tool ID, Tool Length, Connection
in [mm] in [mm] in [mm] in [mm]
1.812 [46.00] 3.063 [77.80] 1.811 [46.00] 12.008 [305.00] 2⅜ EU 8RD
3.063 [77.80] 1.874 [47.60] 12.008 [305.00] 2⅞ EU 8RD
1.875 [47.10]
3.669 [93.20] 1.874 [47.60] 12.008 [305.00] 2⅜ EU 8RD
2.250 [57.20] 3.748 [95.20] 2.248 [57.10] 14.016 [356.00] 2⅞ EU 8RD
2.312 [58.70] 3.748 [95.20] 2.311 [58.70] 14.016 [356.00] 2⅞EU 8RD
2.750 [69.90] 4.500 [114.30] 2.750 [69.90] 12.992 [330.00] 3½ EU 8RD
2.812 [71.40] 4.500 [114.30] 2.811 [71.40] 13.465 [342.00] 3½ EU 8RD
Model RF nipple with selective profile.
Nipples 45
Model SH Shear Out Plug
Shear Out Plug: Product Number 659
MAIN FEATURE Description
■ 2⅜ EU 8RD, 2⅞ EU 8RD, and 3½ EU 8RD The Model SH shear out plug is deployed to make a hydraulic
tubing connections set installation hermetic. The plug is placed under the lowest
■ No maintenance required packer. After ejection of the plug, the body remains as an
entrance guide for slickline.
■ Plug or ball optional
Operation Mode
Run the tool with pins rated according to setting program.
ØA
Specifications
Tool OD, Tool ID, Tool Length, Connection
in [mm] in [mm] in [mm]
3.063 [77.8] 2.008 [51.00] 5.433 [138.00] 2⅜ EU 8RD
3.669 [93.20] 2.402 [61.00] 5.827 [148.00 ] 2⅞ EU 8RD
4.500 [114.3] 2.992 [76.00] 6.299 [160.00] 3½ EU 8RD
ØB
ØA
NRR Shear Out Plug with Profile Specifications (Product Number 657)
Tool Profile, Tool ID, Tool ID, Tool Length, Connection
in [mm] in [mm] in [mm] in [mm]
1.812 [46.02] 3.063 [77.80] 1.811 [46.00] 12.598 [320.00] 2⅜ EUE
2.250 [57.20] 3.669 [93.20] 2.248 [57.10] 13.976 [355.00] 2⅞ EUE
ØB
ØA ØD
Specifications
Casing Size, Casing Weight, Casing ID, Casing ID, Packer OD, Tool OD, Tool ID, Tool Length, Connection
in [mm] lbm/ft [kg/m] Min., in [mm] Max., in [mm] in [mm] in [mm] in [mm] in [mm]
13.00–15.50 [19.34–23.06] 4.949 [125.70] 5.043 [128.10] 5.091 [129.30] 4.921 [125.00] 2.402 [61.00] 46.772 [1,188.00] 2⅞ EU 8RD
5½ [139.70]
15.50–17.00 [23.06–25.06] 4.890 [124.20] 4.949 [125.70] 5.024 [127.60] 4.921 [125.00] 2.402 [61.00] 46.772 [1,188.00] 2⅞ EU 8RD
17.00–23.00 [25.29–34.22] 6.366 [161.70] 6.535 [166.00] 6.520 [165.60] 5.984 [152.00] 2.402 [61.00] 45.079 [1,145.00] 2⅞ EU 8RD
7 [177.80]
26.00–29.00 [38.64–43.15] 6.185 [157.10] 6.276 [159.40] 6.315 [160.40] 5.984 [152.00] 2.402 [61.00] 45.079 [1,145.00] 2⅞ EU 8RD
Dynamic Valve 49
Model AR-1 Tension Mechanical Anchor
Tension Mechanical Anchor: Product Number 750
MAIN FEATURES Description
■ 2⅜ EU 8RD, 2⅞ EU 8RD, and 3½ EU 8RD The Model AR-1 tension mechanical anchor is a robust
tubing connections and reliable in applications where it its necessary to secure
■ Increased pumping efficiency through the string to the casing while using mechanical pumping.
friction reduction Pumping efficiency is increased by means of decreasing the
friction caused by the movement of rod inside a not properly
■ Double mechanical grip
aligned tubing string. The Model AR-1 anchor can be set in
■ Higher rotation friction: friction pads compression, tension, or neutral.
■ Emergency release (shearing-rated pins)
Setting Operation
■ Low maintenance cost
With the tool at depth, rotate from 6 to 8 turns counterclockwise
(left) at tool level and apply compressive force or tension
according to procedure. Be aware of the rate at which the
emergency release shearing pins were set.
Releasing Operation
Set the string to the neutral point and pull between 1,000
and 1,500 lbf, then rotate from 6 to 8 turns counterclockwise (left)
at tool depth. In case of using the emergency release option,
pull over the tubing weight as rated for the shearing pins
ØB
ØA
Specifications
Casing Size, Casing Weight, Casing ID, Casing ID, Tool OD, Tool ID, Tool Length, Connection
in [mm] lbm/ft [kg/m] Min., in [mm] Max., in [mm] in [mm] in [mm] in [mm]
4½ [114.30] N/A 3.921 [99.60] 4.091 [103.90] 3.740 [95.00] 2.008 [51.00] 27.598 [701.00] 2⅜ EU 8RD
5 [127.00] N/A 4.276 [108.60] 4.559 [115.80] 4.000 [101.60] 2.008 [51.00] 27.598 [701.00] 2⅜ EU 8RD
5½ [139.70] N/A 4.669 [118.60] 5.043 [128.10] 4.500 [114.30] 2.402 [61.00] 28.957 [735.50] 2⅞ EU 8RD
7 [177.80] N/A 5.921 [150.40] 6.535 [166.00] 5.500 [139.70] 2.402 [61.00] 30.787 [782.00] 2⅞ EU 8RD
7 [177.80] N/A 5.921 [150.40] 6.535 [166.00] 5.500 [139.70] 2.992 [76.00] 30.984 [787.00] 3½ EU 8RD
Anchors 51
Model AR-2 Torque Anchor
Torque Anchor: Product Number 752
MAIN FEATURES Description
■ 2⅞ EU 8RD and 3½ EU 8RD The Model AR-2 torque anchor is robust, reliable, and has
tubing connections applications where it is necessary to secure the string to the
■ Special slips with cams casing while using electrical (ESP) pumping, increasing efficiency
by providing a secure anchor to the casing. When the rotor starts
■ Slip spring blades
its rotation, the torque applied to the tubing string is transferred
■ Larger slips areas to the casing walls.
■ Higher grip
Operation Mode
■ Low maintenance cost
With the tool at depth, rotate with a pipe wrench (on the surface)
clockwise (right), then release suddenly to verify the anchor is
working properly. The friction against the friction pads on the
casing force the springs and activates the slips.
Releasing Operation
Start pulling out the tubing while checking the tension.
ØB
ØA
Specifications
Casing Size, Casing Weight, Casing ID, Casing ID, Tool OD, Tool ID, Tool Length, Connection
in [mm] lbm/ft [kg/m] Min., in [mm] Max., in [mm] in [mm] in [mm] in [mm]
5½ [139.70] N/A 4.669 [118.60] 5.043 [128.10] 4.500 [114.30] 2.402 [61.00 ] 15.197 [386.00] 2⅞ EU 8RD
7 [177.80] N/A 5.921 [150.40] 6.535 [166.00] 5.500 [139.70] 2.402 [61.00] 17.165 [436.00] 2⅞ EU 8RD
7 [177.80] N/A 5.921 [150.40] 6.535 [166.00] 5.500 [139.70] 2.992 [76.00] 17.165 [436.00] 3½ EU 8RD
Anchors 53
Model AR-3 DL Hydraulic Tension Anchor
Hydraulic Tension Anchor: Product Number 756
MAIN FEATURES Description
■ 2⅜ EU 8RD, 2⅞ EU 8RD, and 3½ EU 8RD The Model AR-3 DL hydraulic tension anchor was specifically
tubing connections designed for special wells (dogleg, deviation, etc.). It is necessary
■ Hydraulically set to secure the string to the casing when using mechanical pumping,
thus increasing its efficiency. The packer can be set in compression,
■ Double mechanical grip
tension, or neutral.
■ Friction pads for higher rotation friction
■ Emergency release (shearing rated pins) Setting Operation
With the tool at depth and the installation plugged at the bottom,
■ Low maintenance cost
apply pressure to shear the pins (previously set). Then, apply
tension according to tubing movement procedure. Be aware
of the shearing pins rate for the emergency release option.
Releasing Operation
Set the string to the neutral point and pull between 1,000 and
1,500 lbf. Rotate 6 to 8 turns counterclockwise (left) at tool depth.
In order to use the emergency release system, pull over the tubing
weight according to the shearing pins rate.
ØB
ØA
Specifications
Casing Size, Casing Weight, Casing ID, Casing ID, Tool OD, Tool ID, Tool Length, Connection
in [mm] lbm/ft [kg/m] Min., in [mm] Max., in [mm] in [mm] in [mm] in [mm]
5½ [139.70] N/A 4.669 [118.60] 5.043 [128.10] 4.500 [114.30] 2.402 [61.00] 33.228 [844.00] 2⅞ EU 8RD
7 [177.80] N/A 5.921 [150.40] 6.535 [166.00] 5.500 [139.70] 2.402 [61.00] 38.937 [989.00] 2⅞ EU 8RD
7 [177.80] N/A 5.921 [150.40] 6.535 [166.00] 5.500 [139.70] 2.992 [76.00] 38.937 [989.00] 3½ EU 8RD
Anchors 55
Model AR-4 Open Hole Hydraulic Anchor
Open Hole Hydraulic Anchor: Product Number 755
MAIN FEATURES Description
■ 45,000-lbf maximum working tension The Model AR-4 openhole hydraulic anchor was designed to
■ Hydraulically set support tensions while holding up anchored epoxy-reinforced-
fiberglass casing to the openhole well, when affected by
■ Hydraulic circulation sub
differential pressures producing upward forces that exceed its
■ Wide diameter setting range weight. The Model AR-4 anchor was developed specifically to
■ Low working pressures cement and repair wells with epoxy reinforced fiberglass casing.
■ Big circulation hole diameters
Setting Operation
After positioning the anchor at the desired depth, apply a
10,000-lbf compressive force, then apply tension and bleed
off pressure. While in tension, apply pressure to activate
the circulation sub.
ØB
ØA
Specifications
Openhole Diameter, Openhole Openhole Openhole Tool OD, Tool ID, Tool Length, Connection
in [mm] Weight, ID, Min., ID, Max., in [mm] in [mm] in [mm]
lbm/ft [kg/m] in [mm] in [mm]
8⅛–13 [206.4–330.2] N/A – – 6.051 [153.70] 2.402 [61.00] 41.043 [1,042.50] 3½ EU 8RD
Anchors 57
Model ATC “Catcher” Model Tubing Anchor
“Catcher” Model Tubing Anchor: Product Number 438
MAIN FEATURES Description
■ Increases pumping efficiency The Model ATC “Catcher” tubing anchor is demployed to keep
■ Keeps operation costs down with the production string in tension and hold certain tubing parts that
low maintenance requirements could fall into the well. The anchor is primarily used in mechanical
pumping systems when it is necessary to maintain the tubing
■ Can be set manually or by clockwise rotation
in tension.
■ Parts interchange with other manufacturers
Setting Operation
Once at the desired depth, rotate the tubing counterclockwise (left)
5 to 8 turns until slips are in contact with the casing.
ØB
ØA
Specifications
Casing Size, Casing Weight, Casing ID, Casing ID, Tool OD, Tool ID, Tool Length, Connection
in [mm] lbm/ft [kg/m] Min., in [mm] Max., in [mm] in [mm] in [mm] in [mm]
5½ [139.70] 13.00–23.00 [19.34–34.22] 4.670 [118.60] 5.044 [128.10] 4.500 [117.80] 2.440 [62.00] 34.212 [869.00] 2⅞ EU 8RD
17.00–20.00 [25.29–29.76] 6.403 [162.60] 7.125 [181.00] 6.250 [158.70] 2.440 [62.00] 40.472 [1,028.00] 2⅞ EU 8RD
7 [177.80]
20.00–38.00 [29.76–56.54] 5.675 [144.10] 6.456 [164.00] 5.500 [139.70] 2.440 [62.00] 40.472 [1,028.00] 2⅞ EU 8RD
9⅝ [244.48] 32.30–47.00 [48.06–69.93] 8.681 [220.50] 9.001 [228.60] 8.000 [203.20] 2.402 [61.00] 37.322 [948.00] 3½ EU 8RD
Anchors 59
Non-Rotating Tubing Anchor
NRA278 Non-Rotating Tubing Anchor: Product Number 438
MAIN FEATURES Description
■ 2⅞-in EU 8RD connections The NRA278 non-rotating tubing anchor is installed as
■ Rotation not required for setting part of the tubing string, to set it fix to the casing. Its main
application is in wells where it is not possible to set the
■ Long-working-life slips
conventional anchors by means of tubing rotation due
to heating pipes inside the well.
Setting Operation
The NRA278 anchor is operated by means of upward
and downward movements in the tubing. The tool
setting is carried out by tensioning the tubing.
Øb
Øa
Specifications
Casing Size, Casing Weight, Casing ID, Casing ID, Tool OD, Tool ID, Tool Length, Connection
in [mm] lbm/ft [kg/m] Min., in [mm] Max., in [mm] in [mm] in [mm] in [mm]
17.00–20.00 [25.29–29.76] 6.403 [62.60] 7.125 [181.00] 6.250 [158.70] 2.440 [62.00] 35.433 [900.00] 2⅞-in EU 8RD
7 [177.80]
20.00–38.00 [29.76–56.54] 5.675 [144.10] 6.456 [164.00] 5.500 [139.70] 2.440 [62.00] 35.433 [900.00] 2⅞-in EU 8RD
Anchors 61
Model DCH-1 Hydraulic Circulation Sub
Hydraulic Circluation Sub: Product Number 969
C
ØB
ØA
Specifications
Casing Size, Casing Casing ID, Casing ID, Tool OD, Tool ID, Tool Connection
in [mm] Weight, Min., Max., in [mm] in [mm] Length,
lbm/ft in [mm] in [mm] in [mm]
[kg/m]
5½ [139.70] N/A 4.276 4.559 4.488 1.921 22.519 2⅜ EU 8RD
[108.60] [115.80] [114.00] [48.80] [572.00]
5½ [139.70] N/A 4.669 5.043 4.685 2.307 22.204 2⅞ EU 8RD
[118.60] [128.10] [119.00] [58.60] [564.00]
7 [177.80] N/A – – 5.500 2.992 19.429 3½ EU 8RD
[139.70] [76.00] [493.50]
Open well N/A – – 6.051 2.402 41.043 5½ Centron Box
8⅛–13 [153.70] [61.00] [1,042.50] × 3½ EU 8RD Pin
[206.37–330.2]
ØA
Drillable Plugs 63
Model RN Drillable Plug
Wire Setting Drillable Plug
MAIN FEATURES Description
■ Wireline set The Model RN drillable plug is a proven reliable product. It presents
■ Drillable excellent operating features (reliable settings). The plug can be
set by different types of F-10 and F-20 wireline setting tools. The
■ Cast iron construction
Model RN plug is designed for quick setting and to sustain high
■ One sliding part temperatures and pressures.
■ Can be set in most grades of casing
(including P110)
■ Proper metallic protection of the rubber
to avoid its stretching
■ For temporary or permanent services
■ Reliable ring supporting setting strength
■ Small OD allows quick and safe running
Drillable Plugs 65
Model RK Cement Retainer
Cement Retainer for Wireline and Tubing Set
MAIN FEATURES Description
■ Wireline Set The Model RK cement retainer is designed for squeeze cementing
■ Drillable operations. It has a surface-controlled valve when setting weight
in the string to open it and lifting it to close it (by means of the
■ Cast iron construction
stinger located in the lowest part of the string).
■ One sliding part
■ Can be set in most grades of casing To test the tool, the stinger must be position inside the flapper
(including P110) valve, between the seal rings. The valve closes automatically
when the stinger is retrieved.
■ Proper metallic protection of the rubber
to avoid its stretching The Model RK retainer is part of a Wireline setting kit. Adapters
■ For temporary or permanent services are necessary to set by tubing. The retainer can sustain high
■ It contains lock rings that support pressures and temperatures.
the setting force
■ Small OD allows quick and safe running
Cement Retainer 67
Blank Cover
Product Number 851
Blank cover.
ØA
Specifications
Tool OD, Tool ID, Tool Length, Connection
in [mm] in [mm] in [mm]
3.063 [77.80] – [–] 2.953 [75.00] 23⁄8 EU 8RD
3.669 [93.20] – [–] 3.346 [85.00] 27⁄8 EU 8RD
4.500 [114.30] – [–] 3.937 [100.00] 31⁄2 EU 8RD
Entry guide.
ØA
Specifications
Tool OD, Tool ID, Tool Connection
in [mm] in [mm] Length,
in [mm]
2.866 [72.80] 2.008 [51.00] 3.937 [100.00] 23⁄8 EU 8RD
3.669 [93.20] 2.402 [61.00] 4.528 [115.00] 27⁄8 EU 8RD
Accessories 69
1⁄2 Mule Shoe
Product Number 854
ØA
ØB
Specifications
Tool OD, Tool ID, Tool Connection
in [mm] in [mm] Length,
in [mm]
3.063 [77.80] 2.008 [51.00] 6.299 [160.00] 23⁄8 EU 8RD
3.669 [93.20] 2.402 [61.00] 7.087 [180.00] 27⁄8 EU 8RD
3.669 [93.20] 2.283 [58.00] 7.087 [180.00] 27⁄8 EU 8RD
4.500 [114.30] 2.992 [76.00] 7.874 [200.00] 31⁄2 EU 8RD
Accessories 71
Tubing and Casing X-Overs
Product Number 404
Tubing and casing X-Overs (crossovers) are available in most types of
ordinary API thread combinations, according to API Std-5B standard
specifications (EU 8RD, NU, LP, etc).
ØA ØB
Crossovers are constructed of SAE 4140 steel and stainless steel
according to customer specifications.
ØB ØA
ØA
ØB
C
Tubing and casing X-overs
Accessories 73
Model RZF Float Shoe
Float Shoe: Product Number 953
MAIN FEATURES Description
■ Holds annular pressure The Model RZF float shoe is employed as a retaining
■ No maintenance required valve and as a landing collar for the displacement plug
when cementing casing or tubing.
ØB
ØA
Specifications
Tool OD, Tool ID, in Tool Length, Connection
in [mm] [mm] in [mm]
3.669 [93.20] 1.890 [48.00] 13.976 [355.00] 2⅞ EU 8RD
ØB
ØA
RPJ pup-joint
Accessories 75
Model KP and MP Lateral Outlet Mandrel
Lateral Outlet Mandrel: Product Number 412
Description
The Models KP and MP lateral outlet mandrels are designed out of an oval cross-section of a pipe, and can incorporate
SAE 4130 low steel alloy or AISI 316L stainless steel into their construction. The mandrel ends are integrally forged and end
in an excentric rounded cross-section. This excentric ends allow to place the threaded connections, having the same flowing
area as of the one as of the tubing. The ends present an API EU 8 RD box-up and box-down threads configuration.
The sizes are: ∅ 2⅜ in, ∅ 2⅞ in and ∅ 3½. These type of mandrels have a lateral output pocket that can place many
types of regulating valves as for example, flow valves for water injection, gas lifting, blanks, etc. The pockets are made of
SAE steel and 4130 steel. The one piece tubular pocket is welded to the mandrel by qualified operators and procedures.
The packing seal diameter complies with the dimensions and external polish required by the API 11V1 std. The pocket
presents a ledge in its entry which allows the use of valves with an integral or upper latch.
Model KP and MP Lateral Output Mandrels For ∅ 1-In And ∅ 1¼-in Valve Specifications
Part number KPS 238 KPN 238 KPB 238 KPI 238 KPS 278 KPN 278 KPB 278
Internal testing pressure, psi 7,500 7,500 6,000 3,500 7,500 7,500 6,000
External testing pressure, psi 5,000 5,000 5,000 3,000 5,000 5,000 5,000
Traction set, lbf/Ton 209,660 209,660 209,660 95,900 341,270 341,270 341,270
[95.1] [95.1] [95.1] [43.5] [154.8] [154.8] [154.8]
Type of thread API EU 8RD 2⅜ in API EU 8RD 2⅞ in
Configuration Box up × box down Box up × box down
Body material SAE 4130 SAE 4130 SAE 4130 AISI 316L SAE 4130 SAE 4130 SAE 4130
Pocket material SAE 4130 SAE 4130 AISI 316L AISI 316L SAE 4130 SAE 4130 AISI 316L
Type of service Normal Corrosive† Normal Corrosive Normal Corrosive‡ Normal
† Internal-External “Electroless Nickel” coating that complies with ASTM B 733 standard. Coating thickness: 50 microns.
‡ Traction set based on the mandrel critical area, without internal and/or external pressures and at ambient temperature. This value does not include the type of thread.
D B
E E
The seal elements provided are made of a Kevlar® and Neoprene™ compounds that assure better
performance than rubber and fabric ones. They operate under the same principle as the retrievable flow
regulators available in the market, and can be installed in 1- or 1½-in pocket mandrel diameters of any
manufacturer.
A retaining system can be provided to avoid the backflow from the formation to the tubing. The standard
model comes with a spring that allows rates up to 170 m3/day; it can be replaced by one for higher rates
in order to obtain a maximum of 240 m3/day.
An anti-lock system can be provided for high differential pressure wells. The ∅1¼-in regulating valves
have a lower integral latch (nose) and the flow gets in through the upper part (head). The ∅1½-in
retaining valves present a latch in the upper part (head) and the flow gets in through the lower part (nose).
D
B E
C B
A
Specifications
Tool Profile, Tool OD, B Tool Length, Connection
in [mm] in [mm] in [mm] in [mm]
2.000 [50.80] 2.375 [60.5] – 8.228 [209] 2-in NPT
Hydraulic System:
Run the Model WRTP-1 with the hydraulic setting tool to the
required depth. Throw the ball and pressurize the string to set
hydraulically.
Releasing Operation
Run the fishing tool, set 5,000 lbf compressive force on top
of the plug to open the equalization sleeve and unlatch the
releasing retention system. Pull 4,000 to 5,000 lbf to release
the plug.
ØA
Specifications
Casing Size, Casing Weight, Casing ID, Casing ID, Tool OD, Tool ID, Tool Length, Connection
in [mm] lbm/ft [kg/m] Min., in [mm] Max., in [mm] in [mm] in [mm] in [mm]
13.00–17.00 [19.34–25.06] 4.892 [124.20] 5.044 [128.10] 4.744 ]120.50] – 40.315 [1,024.00] 2⅜ EU 8RD
5½ [139.70] 20.00 [29.76] 4.778 [121.40] 4.892 [124.20] 4.638 [117.80] – 40.315 [1,024.00] 2⅜ EU 8RD
23.00 [34.22] 4.669 [118.60] 4.780 [121.40] 4.500 [114.30] – 40.315 [1,024.00] 2⅜ EU 8RD
17.00–20.00 [25.29–29.76] 6.456 [164.00] 6.538 [166.00] 6.268 [159.20] – 50.000 [1,281.00] 2⅞ EU 8RD
23.00–26.00 [34.22–38.68] 6.276 [159.40] 6.366 [161.70] 6.079 [154.40] – 50.000 [1,281.00] 2⅞ EU 8RD
7 [177.80] 29.00 [43.15] 6.184 [157.10] 6.276 [159.40] 5.969 [151.60] – 50.000 [1,281.00] 2⅞ EU 8RD
32.00 [47.61] 6.094 [154.80] 6.184 [157.10] 5.811 [147.60] – 50.000 [1,281.00] 2⅞ EU 8RD
35.00–38.00 [52.07–56.54] 5.92 [150.40] 6.004 [152.50] 5.657 [143.70] – 50.000 [1,281.00] 2⅞ EU 8RD
Service Tools 83
Model JP278 Jet Pump
Jet Pump
MAIN FEATURES Description
■ Recovers sand from perforations The Model JP278 jet pump is run in the tubing string above the packer and can be used as a final
and cavity areas. installation in a well production system. The jet pump’s design allow an operator to run a variety of tools
■ Can used as part of a final well through it.
production system
Applications for the Model JP278 jet pump include recovery of surface acid after a stimulation job,
■ SAE 4140 steel construction (internal parts recovery of frac-pumped fluids, well testing, cleaning plugged or damaged zones, and for periodic
can be constructed of tungsten carbide) cleaning of injection wells.
■ The combination between nozzle and throat
is defined according to the production
rate and the available facilities on surface
(pressure and rate).
■ The pump ejector is placed in the inside
of the body. It is recommended to operate
it with the slickline equipment not only
to insert it, but also to retrieve it.
■ Pump ejector can also be placed inside
an CMD sleeve or a modified KPS side-
pocket mandrel.
Injected and
production flowback
Annular flowback
Flow injected
by tubing
Pump ejector
Packer
Perforations
Service Tools 85
Argentina Manufacturing Plants
Neuquén, Argentina
Phone: 54-2994-440905/0906/0909
Villa Regina, Argentina
Phone: 54-2984-464060/1198
13-CO-0098