Professional Documents
Culture Documents
F35
FEEDER PROTECTION SYSTEM
APPLICATIONS
• Primary protection and control for multiple distribution feeders • Busblocking/ interlocking schemes
• Distribution load shedding schemes based on voltage and • Throw over schemes (bus transfer scheme applications)
frequency elements • Distributed Generation (DG) interconnect protection, including
active and passive anti-islanding
FEATURES
Protection and Control IEC 61850 Process Bus Interface
• Instantaneous and time phase overcurrent protection • Robust communications with up to 8 HardFiber Bricks
• Thermal overload, Instantaneous and time ground/neutral/ • Redundant architecture for dependability and security
negative sequence overcurrent protection, Wattmetric Ground
Fault Directional Monitoring and Metering
• Neutral and auxiliary overvoltage • Metering - current, voltage, power, energy, frequency
• Phase and auxiliary undervoltage • Advanced recording capabilities deliver a 1024 event recorder,
configurable and extended waveform capture and data logger
• Under frequency
• Setting Security Audit Trail for tracking changes to F35
• Four shot autoreclose for up six breakers and Broken conductor configuration
elements
• Built-in selector switch EnerVista™ Software
• Graphical Logic Designer and Logic Monitor to simplify designing
Communications and testing procedures - Enervista UR Engineer
• Networking interfaces – Up to three Ethernet ports 100Mb Fiber • Service and Update notification toolset that also ensures device
or copper, RS485, RS232, RS422, G.703, IEEE C37.94 documents and software are up-to-date - Enervista LaunchPad
• Multiple Protocols - IEC61850, DNP 3.0 and Modbus serial/TCP, • EnerVista™ Integrator providing easy integration of data in the
IEEE1588, IEC60870-5-104, Ethernet Global Data (EGD) F35 into new or existing monitoring and control systems
• Direct I/O – secure, high-speed exchange of data between URs
for Direct Transfer Trip applications
• Embedded Managed Ethernet Switch with 4 - 100 Mbit Fiber
optic ports and 2 copper ports
g imagination at work
F35 Feeder Protection System
310 GEDigitalEnergy.com
F35 Feeder Protection System
Fault 2
Reverse zone interlocking protection - By using the IEC61850 GOOSE or hi-speed Direct I/O capability blocking
signals can be transferred upstream, allowing minimal coordination delays. Fast clearance can be provided for
Fault 1 and still maintain coordination for Fault 2.
GEDigitalEnergy.com 311
F35 Feeder Protection System
Scalable Hardware • Data Logger, disturbance recording – Role Based Access Control (RBAC)
The F35 is available with a multitude 16 channels up to 1 sample / cycle / Efficiently administrate users and roles
of I/O configurations to suit the most channel within UR devices. The new and advance
demanding application needs. The • Fault Reports access functions allow users to configure
expandable modular design allows for - Powerful summary report of pre-fault up to five roles for up to eight configurable
easy configuration and future upgrades. and fault values users with independent passwords.
• Multiple CT/VT configurations allow for The standard “Remote Authentication
implementation of many differential The very high sampling rates and large Dial In User Service” (Radius) is used for
Distribution Feeder Protection
schemes, including concurrent split- amount of storage space available for authentication.
phase and differential protection data recording in the F35 can eliminate
Event Recorder (Syslog for SEM)
• Up to 80 digital inputs and up to 56 the need for installing costly standalone
digital outputs are available recording equipment. Capture all cyber security related events
within a SOE element (login, logout, invalid
• Types of digital outputs include trip-
Advanced Device Health password attempts, remote/local access,
rated Form-A and Solid State Relay
Diagnostics user in session, settings change, FW
(SSR) mechanically latching, and
The F35 performs comprehensive device update, etc), and then serve and classify
Form-C outputs
health diagnostic tests during startup data by security level using standard
• Form-A and SSR outputs available with Syslog data format . This will enable
and continuously at runtime to test
optional circuit continuity monitoring integration with established SEM (Security
its own major functions and critical
and current detection to verify proper Event Management) systems.
hardware. These diagnostic tests monitor
operation of the connected primary
for conditions that could impact security
equipment
and availability of protection, and present
• Mechanically latching outputs device status via SCADA communications
Communications
can be used to develop secure and front panel display. Providing The F35 provides advanced commun-
interlocking applications and replace continuous monitoring and early detection ications technologies for remote data and
electromechanical lockout relays of possible issues helps improve system engineering access, making it the easiest
• RTDs and DCmA inputs are available to uptime. and most flexible feeder protection relay
monitor equipment parameters such as to use and integrate into new and existing
temperature & pressure • Comprehensive device health infrastructures. Direct support for fiber
diagnostic performed during startup optic Ethernet provides high-bandwidth
communications allowing for low-latency
• Monitors the CT/VT input circuitry to
Monitoring and Metering validate the integrity of all signals
controls and high-speed file transfers of
relay fault and event record information.
The F35 includes high accuracy metering • Input, outputs, trip circuits and analog The available three independent Ethernet
and recording for all AC signals. Voltage, channels are continuously monitored ports, redundant Ethernet option and
current, and power metering are built into for accuracy and performance the embedded managed Ethernet switch
the relay as a standard feature. Current
provide the means of creating fault
and voltage parameters are available as
tolerant communication architectures in
total RMS magnitude, and as fundamental Cyber Security – an easy, cost-effective manner without
frequency magnitude and angle.
CyberSentry™ UR the need for intermediary communication
Fault and Disturbance Recording CyberSentry™ UR enabled UR devices hardware.
deliver full cyber security features that help The F35 supports the most popular
The advanced disturbance and event
customers to comply with NERC CIP and industry standard protocols enabling easy,
recording features within the F35 can
NIST IR 7628 cyber security requirements. direct integration into DCS and SCADA
significantly reduce the time needed for
This software option delivers the following systems.
postmortem analysis of power system
events and creation of regulatory reports. core features:
Recording functions include: • IEC61850
AAA Server Support (Radius/LDAP)
• DNP3.0
• Sequence of Event (SOE) Enables integration with centrally
• Ethernet Global Data (EGD)
- 1024 time stamped events managed authentication and accounting
of all user activities and uses modern • IEC6870-5-104
- Events up to 45s in length
industry best practices and standards that • IEEE 1588 for time synchronization
• Oscillography,
meet and exceed NERC CIP requirements • Modbus RTU, Modbus TCP/IP
- 64 digital & up to 40 Analog channels for authentication and password
management.
312 GEDigitalEnergy.com
F35 Feeder Protection System
Interoperability with Embedded the connection method, Direct I/O provides the local displays without uploading new
IEC61850 continuous real-time channel monitoring firmware.
Use the F35 with integrated IEC61850 to that supplies diagnostics information on
channel health.
lower costs associated with substation
Direct I/O provides superior relay-to- EnerVistaTM Software
protection, control and automation. GE
Energy’s leadership in IEC61850 comes relay communications that can be used The EnerVista™ Suite is an industry-leading
from thousands of installed devices and in advanced interlocking, generation set of software programs that simplifies
follows on seven years of development rejection and other special protection every aspect of using the F35 relay. The
schemes. EnerVista™ suite provides all the tools to
Analyze feeder faults using both analog and digital power system quantities
that are measured and recorded up to a rate of 64 samples per cycle.
Record the operation of the internal F35 elements and external connected
devices with 1ms time-stamped accuracy to identify the Sequence of
Operation of station devices during feeder faults and disturbances.
GEDigitalEnergy.com 313
F35 Feeder Protection System
User Interface
The F35 front panel provides extensive local HMI capabilities. The local display is used for monitoring, status messaging,
fault diagnosis, and device configuration. User configurable messages that combine text with live data, can be displayed
when user-defined conditions are met.
Multi-Language
Display
• English
• Russian
• French
• Chinese
• Turkish
314 GEDigitalEnergy.com
F35 Feeder Protection System
Typical Wiring
A B C F1a I P1a TC 1
6G
IA5
P1 P1b
V
F1b IA P1c
I P2a
F1c IA1 P2 P2b
V
F2a IB5
P2c
I P3a
F2b IB P3 P3b TC 2
V
1 F2c IB1 I
P3c
P4a
P4 P4b
F3a IC5 V
P4c
F3b IC P5a
F7b IC
I H1a
6G
H1 H1b
V
F7c IC1 H1c
I H2a
F8a IG5 H2 H2b
V
F8b IG H2c
I H3a
F8c IG1 H3 H3b
V
H3c
M1a IA5 I H4a
M1b H4 H4b
IA V
H4c
M1c IA1 H5a
H5c UR COMPUTER
M2a IB5 H6a 1 1 8
H6c
M2b IB TXD 2 2 3 RXD
H5b
3 M2c IB1 H7a
RXD 3
4
3
4
2 TXD
20
H7c SGND 5 5 7 SGND
M3a IC5
H8a 6 6 6
M3b IC H8c 7 7 4
H7b 8 8 5
M3c IC1 9 9 22
SURGE H8b
M4a IG5
M5c IA1
W1 W1b
V
M6a IB5 W1c
I W2a
M6b IB W2 W2b
V
4 M6c IB1 I
W2c
W3a
M7a IC5 W3 W3b
V
W3c
M7b IC I W4a
W4 W4b
M7c IC1 V
W4c
W5a
M8a IG5
W5c
M8b IG W6a
W6c
M8c IG1 W5b
U1a IA5 W7a
W7c
U1b IA
W8a
U1c IA1 W8c
W7b
U2a IB5 SURGE W8b
U2b IB
B1b
5 CRITICAL
1
U4c IG1
NORMAL
Tx1 10BaseFL * Optic
Fibre
Rx1
U5a VA
COM Tx2 10BaseFL
ALTERNATE
U5c VA 1 Rx2
10BaseT Shielded
U6a VB
Remote
U6c VB D1a Device
RS485
D2a
U7a VC com D3a
D4b
U7c VC IRIG-B D4a
CONNECTION
Input
U8a VX BNC Co-axial
U8c VX IRIG-B
Output BNC Co-axial
832767A5.CDR
Minimum
X W V U T S R P N M L K J H G F D B
6 8 6 8 6 8 9 1
U6a VB
U6c VB
U7a VC
U7c VC F35-H00-HCH-F8H-H6G-M8H-P6G-U8F-W6G
GEDigitalEnergy.com 315
F35 Feeder Protection System
Ordering
F35 - * ** - H * * - F ** - H ** - M ** - P ** - U ** - W * For Full Sized Horizontal Mount
Base Unit F35 Base Unit
CPU E RS485 + RS485 (IEC61850 option not available)
G RS485 + Multi-mode ST 10BaseF
H RS485 + Mutli-mode ST Redundant 10BaseF
J RS485 + Multi-mode ST 100BaseFX
K RS485 + Multi-mode ST Redundant 100BaseFX
N RS485 + 10/100 BaseT
T RS485 + three Multimode SFP LC 100BaseFX. Req FW v7xx or higher
U RS485 + two Multimode SFP LC 100BaseFX + one SFP RJ45 100BaseT.
Req FW v7xx or higher
Distribution Feeder Protection
Ordering Note: 1 . To view all the options available for F35, please visit GE’s On-Line Store at http://store.gedigitalenergy.com/viewprod.asp?model=F35
2. Redundant power supply only available in horizontal unit. If redundant is chosen, must be same type. Maximum 2 per chassis
121203-v4
316 GEDigitalEnergy.com