Professional Documents
Culture Documents
The SAINT-GOBAIN Group and Habitat strategy This innovation-driven group is continuously
designing solutions to build more comfortable,
Saint-Gobain, the world leader in the habitat
cost-efficient and sustainable construction projects
and construction markets, designs, manufactures
worldwide. The market leader in all its businesses,
and distributes building materials, providing
SAINT-GOBAIN is divided into four activities:
innovative solutions to meet growing demand in
Construction Products, Innovative Materials,
emerging economies, for energy efficiency and
Building Distribution and Packaging which are
for environmental protection.
either European or world leader.
2
SAINT-GOBAIN PAM
Cast Iron Pipe Systems
Choose PAM GLOBAL for cast iron soil and drain systems
PAM-GLOBAL
Leading brand
for cast iron drainage
pipes and fittings.
3
PAM-GLOBAL ® – Soil and Drain
PAM-GLOBAL®
Cast Iron Pipe Systems
Suitable for
every site condition
Fit for every job configuration,
PAM-GLOBAL® S = Drainage systems for buildings
PAM-GLOBAL® drainage systems PAM-GLOBAL® Couplings = Couplings to connect the pipe system elements
provide a wide modular range of
products. EPAMS® = Syphonic roof drainage system
The large number of product
references helps meeting all drainage
configurations and coping with most
installation constraints.
4
Benefits of PAM-GLOBAL ®
®
PAM-GLOBAL cast iron drainage
spigot systems specification
• The pipes are manufactured in a plant
complying with ISO 9001 quality management
and using the De Lavaud spinning process.
• The material of the system is made of cast iron
according to EN 1561.
• The tensile strength on samples is 300 MPa,
New lining for pipes for Corrosion protection of Strictly compatible fitting ring crush strength in average on DN 100 pipe
optimised properties fittings through KTL systems in the very highest
HPS 2000 cataphoresis coating quality is 450 MPa and Brinnell surface hardness is 220
(inside and outside)
HB degrees in average, which altogether indicate
greater resistance to impacts, easier machining
and cutting onsite.
• The spigot pipes and fittings, their couplings
and accessories comply with EN 877 standard
and RAL-GZ 698 special quality mark with specific
testing requirements. The rubber gaskets of the
coupling comply with EN 681-1.
• Marking: The brand logo, the reference to the
High durability far beyond
the requirements specified
High abrasion resistance
with a smooth surface for
Robust, dimension stable
and shock resistant
standard and to the quality marks, the diameter
in EN 877 excellent flow properties in DN, and the manufacturing date are marked
on the products as required in EN 877.
• The inner coating of the pipes is made of epoxy-
resin 130µm and the external coating is a primer
acrylic paint 40µm.
According to the standard requirement, the internal
coatings can withstand hot water at 95°C for 24
hours and withstand fluids between pH 2-12 for
30 days, without loosing their properties.
High acoustic Preventative fire Insensitive to heat and
• The fittings are mostly coated through a
performance, protection. PAM- cold, very low thermal cataphoresis (KTL) process.
progressive sound GLOBAL® pipes and expansion (0.0105
dampening according to fittings are mm/m K), similar to that • The drainage system belongs to the A1 Class
DIN 4109 (and VDI 4100) noncombustible in
keeping with DIN
of concrete so that their
relative movement
for Building Material according to
4102. will not cause any DIN 4102 in Germany and is non combustible.
problem.
It is CE marked on EN 877, and after tests in a
third party accredited laboratory, is ranking
“A2-s1, d0”, for the complete system.
• The thermal expansion coefficient of cast iron
is only 0.0105 mm/m.°K and similar to that of
steel and concrete; there is no need for expansion
joints.
• The noise insulation properties are complying
Primer coated in the 100% recyclable to Resources are not wasted with DIN 4109.
works, permanent eliminate all waste as 95% of the material
adhesion and attractive disposal problems used to produce PAM- • Cast iron is 100% recyclable and environment
appearance due to special
external finishing coats by
GLOBAL® S pipes consists
of scrap metal
friendly.
the works (e.g. with bridge The manufacturing plant is certified ISO 14001.
structures)
5
PAM-GLOBAL ® About Us
SAINT- GOBAIN HES and SAINT-GOBAIN PAM closely work to promote the quality of the PAM cast
iron products worldwide. The teams in Germany and France are ready to support your building projects
everywhere and supply you with the relevant information.
Liability
The PAM-GLOBAL® S manual is written for general guidance only. Therefore no responsibility can be
accepted for any mistakes, omissions or incorrect assumptions. SAINT-GOBAIN HES does not accept
liability for any claims on installations where components not manufactured by SAINT-GOBAIN PAM
should be involved in a system failure.
Whilst every care has been taken to ensure that information contained in this catalogue is correct,
SAINT-GOBAIN HES or its agents do not accept responsibility for any mistakes herein. Our policy is
one of continuous improvement. We therefore reserve the right to change or alter any product
characteristics without prior notice.
6
PAM-GLOBAL ® Systems
In the De Lavaud process the molten metal is gradually input into a steel mould rotating
at high speed. The process is characterised by its quick cooling that gives a finer
solidification matrix and a more homogeneous metallurgical structure.
These results indicate greater resistance to impacts and crushing, easier machining and cutting. This also
means the products are easier to install on job sites.
8
PAM-GLOBAL ® S Pipes - Coating
New epoxy-resin
2 Cast iron
De Lavaud process
3 Outer coat
(acrylic primer 40 µm)
The coatings principle is to offer consistent performance for pipes, fittings and accessories without any weak
points. So that you can be sure of the products you specify and to fit important changes recently noticed on fluids
carried – disinfectants, hygiene products… - SAINT-GOBAIN PAM regularly makes assessments on coatings.
They are continuously upgraded to provide high protection level against corrosion, and long-lasting properties
to protect the pipe work lifespan.
The inner coating of the PAM-GLOBAL® S pipes has been designed to withstand most chemical stress and resist
abrasion. Made of an epoxy-resin regularly assessed, this coating benefits from continuous improvement to meet
waste water drainage increasing constraints. Its smooth surface enhances flow capacity and prevents incrustations
and deposits. The inner coatings of pipes and fittings have been paired for PAM-GLOBAL® S system consistency,
to withstand equivalent stress and to ensure no weak link could affect the pipe work durability.
The coatings performance of PAM-GLOBAL® S pipes and fittings exceeds by far EN 877 requirements.
is normally supplied in dwellings around COMBINATION Wash + stain remover 2ml/l+ 3ml/ l 7,7 28j
50 - 60°C. After stopping the test, the Wash + Softener 2 ml + 3ml/ l 7,7 28j
pipes and fittings shall be washed CL EANING P RODUCTS Floor cleaning product 8ml/ l 8,2
not
applicable 28j
immediately to eliminate any stains and Bleach 8ml/ l 8,25 not applicable 28j
the coatings shall be examined with
WC CL EANERS Toilet bowl cleaner (gel) 20ml/ l 5,45 28j
regard to blistering and rusting both
Drain cleaner gel 0,33 ml/ l
according to ISO 4628-2 and 3. 13 not applicable 4j
The duration of the test would potentially be equivalent to the extrapolation of a real chemical stress undergone during 7
or 10 years (a 10 to15 min stress per day). This test method however simulates a more severe stress since the samples lie
in direct contact with the solution, the temperature being maintained and the test includes no rinsing over its duration.
= Resistance
9
PAM-GLOBAL ® Fittings - Coating
Internal - external:
Epoxy-film - brown-red colour
- deposited by cataphoresis
and thermoreticulated.
Technology:
Cataphoresis is a coating
process which deposits a film
of regular thickness on
an electrically charged
metallic surface.
1 2 3 4 5 6 7 8
The cast iron components are conveyed through different tanks after being shot blasted.
Cataphoresis is a fully automated painting process offering significant benefits.
10
Advanced coating method
for PAM-GLOBAL® fittings
provides flawless adhesion
and good protection of the
edges and thus a better
corrosion resistance.
Identification Marking
PAM-GLOBAL® fittings
supplied by SAINT-GOBAIN
HES GmbH are marked with
a framed label. These
embossed frames
are patented.
11
PAM-GLOBAL ® – Quality Certifications
EN 877 Standard
The European standard EN 877 “Cast iron pipes and fittings, their joints and accessories for
the evacuation of water from buildings” , known to be the most demanding standard worldwide,
sets up technical specifications as well as test methods and quality control.
12
Voluntary Quality Mark GEG RAL-GZ 698
Being self declared, EN 877 is only proved when third party validated on all criteria and
periodically tested.
Recognised quality mark, GEG (Gütezeichen Entwasserungstechnik Guss) has set forth a
list of testing criteria and quality requirements far exceeding those included in EN 877.
Meeting all these requirements is the first and foremost condition to obtain a RAL-GEG
marking. Third-party inspections are carried out by MPA-NRW twice a year.
Quality marks are voluntary. Their scope is aiming at fitness for purpose and at valuing the
CE Marking
product in a customer-supplier relationship.
Unlike Quality Marks, CE marking is mandatory to be allowed pass into the European Union
and between member states.
Made compulsory by the European Directive for Construction product, its scope is limited to
health and operational safety. CE marking is a minimum precondition to guarantee that
construction products are not dangerous for the European consumers and users. It sets the
same safety criteria shared all over Europe and is mainly intended for the authorities in charge
of market control.
Reaction to fire alone was retained as safety criterion for drainage systems (see Fire protection
chapter).
Based on EN 877, CE marking became mandatory on cast iron drainage products leaving
the factory, from 2009 September the 1st.
For Construction Products, reaction to fire is assessed on the basis of standardised tests and
described in a EUROCLASS classification. For complete ranges – pipes, fittings, couplings
and accessories SAINT-GOBAIN PAM has obtained the excellent EUROCLASS ranking:
A2, s1-d0, now mentioned on the products.
EUROCLASS being based on test methods and a classification harmonised throughout Europe,
the scoring can be used to compare materials and product performances you specify.
Measurement of noise
Laboratory measurement of noise from waste EN 14366
water installations
13
Fire Protection
System Characteristics
For fire safety in a building, the major responsibility SAINT-GOBAIN PAM cast iron has a melting point
rests with the project manager who must respect over 1000°C. In most cases it requires no
the regulation in force. In buildings at risk, such additional fire protection. SAINT-GOBAIN PAM
as multi-storey buildings, materials with reduced has carried out a non exhaustive series of tests
flammability should be selected to apply on its cast iron pipe systems in order to make
precautionary principle. precise recommendations for fire resistance
Reaction to fire is the instant behaviour when a requirements up to 240 minutes (4 hours).
fire breaks out, its propensity to ignite or feed a
fire. For drainage systems to obtain CE marking, SAINT-GOBAIN PAM cast iron pipes are
“Reaction to fire” requires a mandatory certificate, non combustible, they do not feed the fire, nor
stipulating their EUROCLASS classification, issued give off either gases or smokes liable to delay fire
by an accredited and independent laboratory. fighters or damage other equipment.
15
Noise Insulation
02 - 07
DIN 50 - 150
(Date of Manufacture)
16
Noise Insulation
Requirements defined
by DIN 4109 and VDI
Drainage installations must within the same dwelling.
be designed in accordance As a result of its endorsement
with DIN 4109/A1. This by the building authorities
standard defines the DIN 4109/A1 is now made
expected requirements for compulsory under public law.
noise control with the aim of
protecting people in However, it only sets a
residential rooms from minimum requirement.
unreasonable nuisance The VDI Guidelines 4100
caused by sound define 3 sound insulation
transmission. levels (SSt).
These 3 levels can cover all
DIN 4109-1989 specifies sound insulation requirements
the expected requirements and they are to be promoted
regarding the maximum between all actors involved
noise level for in building projects including
rooms requiring noise further occupants on the basis
insulation. These include of private law.
living rooms, bedrooms, To avoid subsequent disputes
workrooms and classrooms. it is highly recommended that
the sound insulation level
Such requirements do not requirements (SSt) should be
apply to room partitions stipulated in the contracts.
EN 14366 complying test results obtained for a flow rate of 2 l/s and a wall thickness of 250±50 kg/m2 (IBP laboratory)
17
Environmental Awareness
For its recycled content, its actual recycling and long lasting properties,
PAM-GLOBAL® cast iron can be considered environment friendly.
18
PAM-GLOBAL ® S - Products
PAM-GLOBAL® S Pipes
L = 3000 mm
DN weight Product Code
50 12,50 156361
70 17,00 156454
80 18,20 156550
100 24,30 156561
125 34,30 156734
150 40,90 156825
200 67,40 156949
250 97,30 157048
300 126,80 157113
19
PAM-GLOBAL ® S - Products
PAM-GLOBAL ® S - Fittings
PAM-GLOBAL ® S - 88˚ Bend
DN X Weight Product Code
50 75 0,72 155749
70 90 1,24 155778
80 95 1,30 176706
100 110 2,00 155813
125 125 3,20 155867
150 145 4,10 155900
200 180 7,80 155930
20
PAM-GLOBAL ® S - Products
21
PAM-GLOBAL ® S - Products
22
PAM-GLOBAL ® S - Products
23
PAM-GLOBAL ® S - Products
24
PAM-GLOBAL ® S - Products
Sink Sink
WC WC
Tub
Finished Floor
The combination branch bathtub), at the same floor level. combination branch to be
enables connection of WC and The 45° angle of outlets is installed in a 180° rotated
another plumbing element (e.g. double-sided to allow the position.
25
PAM-GLOBAL ® S - Products
PAM-GLOBAL ® S Stack
Support Pipe
DN D L Weight Product Code
50 87 220 1,30 156372
70 106 220 1,60 155773
80 118 220 1,80 156462
100 145 220 2,40 156577
125 170 220 3,20 156745
150 195 220 4,10 156837
200 245 220 5,90 156959
250 340 300 12,35 157058
300 390 300 17,80 157123
26
PAM-GLOBAL ® S - Products
1 2 3 4
1- Operation safety: 2- Convenience: 3-4 The cast iron plug and the
Possible bleeding before Ease of opening and closing internal sealing can be removed
opening in case of the cast iron plug with separately.
accidental overpressure. standard tools or a T-handle
operating wrench
27
PAM-GLOBAL ® S - Products
Clamp material: St 37. The clamp consists of a1) Min. length top edge
Supplied with galvanized 3 parts in sizes DN of nut
EPDM sealing. 150 and DN 200.
For DN 250 and 300 expansion plugs are now replaced with blank ends
28
PAM-GLOBAL ® S - Products
WC Connector
29
PAM-GLOBAL ® S - Products
Connecting PAM-GLOBAL ®
Pipes to Clay Pipe With Socket Type “L” acc. to DIN EN295
DN 100 - 200
“L” socket
Rollfix KGUG-Adaptor
PAM-GLOBAL ® pipe DN Code Code
100 180983 179801
125 180984 179802
150 180985 179803
200 180986 179804
Rollfix connector
l
KGUG cast iron adaptor
Size chart for KGUG cast iron adaptor
DN D d l
d mm mm mm
100 124 110 60
KG sewage pipe in compliance 125 151 125 65
with DIN 19534 150 176 160 70
200 226 200 80
30
PAM-GLOBAL ® Couplings
DN D≈ H≈ L≈ Weight Code
Max. dimensions after installation S
50 70 80 42 0,10 210424
70 85 98 42 0,12 210425
80 90 103 42 0,12 210426
100 125 139 48 0,18 210427
125 147 161 56 0,28 210428
150 172 187 56 0,32 210429
200 223 240 70 0,40 210430
DN 250 and DN 300 on request.
Standard version W2 technical The PAM-GLOBAL® RAPID NG Its profile, with edges directed
specifications: coupling, single bolt, allows fast and towards the pipe, encases the
• Strap, clamps: reliable installation. SAINT-GOBAIN elastomer gasket and prevents any
1.4510/11 (AISI 430Ti / 439) PAM’s new design ensures optimized risk of it being expelled during
• Screw: coated steel class 8.8 water-tightness and pressure tightening. In case of fire, the rubber
• Nut: coated steel class 8 resistance and better than ever gasket is not exposed to flames.
corrosion resistance. When fully tightened, the coupling
ensures a built-in electrical continuity,
A wide stainless steel collar allows without any added clip.
tolerance during installation.
DN D≈ H≈ L≈ Weight Code
Max. dimensions after installation INOX
50 70 80 42 0,10 185635
70 85 98 42 0,12 207818
80 90 103 42 0,12 207819
100 125 139 48 0,18 185636
125 147 161 56 0,28 207820
150 172 187 56 0,32 207831
All stainless steel version W5 200 223 240 70 0,40 185637
technical specifications: DN 250 and DN 300 on request. Recommended for pipe systems exposed to climatic
• Strap, clamps: stresses, i.e rainwater spigot systems, drainage systems for bridges, or open multi-storey
1.4404/1.4571 car parks.
(AISI 316 L/361Ti)
• Screw and nut: austenitic
stainless steel A4-70 on AISI 316
31
PAM-GLOBAL ® Couplings
PAM-GLOBAL ® CV - CE NG Couplings
DN 50 - DN 300
DN A B D≈ L Weight Code
Max. dimensions after installation CV
50 14 22,5 70 45 0,10 210398
70 14 22,5 90 48 0,12 210400
80 14 22,5 95 48 0,15 210413
100 18 25,5 122 54 0,20 210416
125 18 25,5 147 54 0,30 210417
150 18 25,5 172 54 0,35 210418
200 18 38 222 78 0,70 210420
250 18 38 287 78 0,85 210422
300 18 38 339 78 0,90 210423
Standard version technical
specifications: These two bolts basic couplings are The PAM design ensures better than
• Collar: Ferritic Stainless Steel - mostly appreciated because simple ever water tightness and pressure
1.4510/11 or AISI 430Ti/439 and easy to remove and reinstall resistance and noticeably improves
• Plates: Ferritic Stainless Steel - without damage. corrosion resistance for these couplings.
1.4373 or 1.4510/11 or AISI
202 or AISI 430Ti/439
• Screws: Coated Stell class 8.8
(minimum of 350 h/salt spray test)
Tightening torques:
CV Couplings : 8-10 N•m for all DN
CE Couplings : 5-8 N•m for DN 50-75/80
10-12 N•m for DN 100-125
12-15 N•m for DN 150-300
32
PAM-GLOBAL ® Couplings
A2 Type: A4 Type:
Casing : 1.4307 Casing : 1.4404
Screws : 1.4301 Screws : 1.4401
Barrels : 1.4307 Barrels : 1.4404
Strengthening plates : 1.4307 Strengthening plates : 1.4404
Grips : 1.4310 Grips : 1.4310
A2 Type: A4 Type:
Casing : 1.4307 Casing : 1.4404
Screws : 1.4301 Screws : 1.4401
Barrels : 1.4307 Barrels : 1.4404
Strengthening plates : 1.4307 Strengthening plates : 1.4404
33
PAM-GLOBAL ® Connectors
50 22 88 76 10 0,45 M8 221261
70 22 110 79 10 0,54 M8 221267
80 25 105 78 10 0,53 M8 221268
100 33 145 93 10 0,90 M8 220750
125 32 165 93 10 0,99 M8 221269
150 32 196 102 5 1,23 M8 221270
200 32 252 118 5 1,72 M 10 221271
*DN 250 and DN 300 on request.
The grip collar is an added The requirements for these performance and the corrosion
device used to lock the products are very high for resistance of the
coupling and ensure both mechanical strength and PAM-GBLOBAL ® UNIGRIP
water tightness and mechanical pressure resistance. collar offer extended lifespan
stability of the pipework. The stability of the mechanical and operation safety over time.
34
PAM-GLOBAL ® Connectors
PAM-GLOBAL ® Konfix
For Transition Connections
Registry No: Z - 42.5 - 240
ø Da
DN D1 D Connecting Pipe
L1 L Insert Depth Weight Product
mm Code
mm
Transitional connectors DN 50- The connections with these flexible Material: EPDM. Clamp made of
125 are devoted to connecting connectors are easy and safe: chrome steel material n° 1.4016.
cast iron ranges S and Plus to one pre-cut lid and a lip seal
other materials, be they steel inside (see figure).
or plastic.
PAM-GLOBAL ® Konfix-Multi
For Multiple Transition Connections
Registry No:. Z - 42.5 - 240
ø Da
DN D1 D Connecting Pipe
L1 L Insert Depth Weight Product
mm Code
mm
PAM-GLOBAL ® Multiquick
For Transition Connections Of Various Diameters
Registry No: Z - 42.5 - 240
DN øD1 øD2 øD3 øD4 ød1 ød2 ød3 ød4 H Weight Product
Code
100x70 117 111 101 81 108 104 94 74 107 0,15 176812
35
PAM-GLOBAL ® Application Guide
Simple Installation
With Greatest
Accuracy
PAM-GLOBAL® pipes up to DN
300 are generally supplied in
3 m length which can be cut to
length.
Where the pipes are cut on
site, they should be cut clean
and square and burrs removed.
Cut ends should be re-coated
with the EXTREM 1 one
component touch-up paint.
Cutting Techniques
PAM-GLOBAL® pipes can be readily cut by the use of a powered disc-cutter, or with wheel cutter.
Ensure correct grade of disc appropriate to cast iron are used, and that cutting wheels or saw blades are changed on
a regular basis. Angle grinders are not advisable for cast iron, but should they be used, make sure a secure hold of
the pipe is made. Warning: Chain cutters or snap cutters should not be used to serve the purpose
Installation Instructions
For PAM-GLOBAL®
RAPID Coupling
1. Push the supplied 2. Push the next pipe spigot 3. Tighten the screw to “null
assembled coupling onto the into the other end of the gap” position, completely
pipe spigot up to the middle coupling. closed, with a ratchet spanner
spacing ring of the seal. or an electric screwdriver
36
PAM-GLOBAL ® Application Guide
Top View
All dimensions
are in mm
37
PAM-GLOBAL ® Syphonic Roof Drainage System
38
PAM-GLOBAL ® Syphonic Roof Drainage System
Conventional
System
39
PAM-GLOBAL ® Syphonic Rainwater Drainage System
Pipes can be laid without Lower insulation costs DN100 DN100 DN100 DN100
gradients through smaller pipe
dimensions
High flow rate enables
self-cleaning Structural suspended
ceiling height can be
Pipe dimensions significantly reduced
reduced
Skirting protection savings
Limited number of pipe thanks to fewer downpipes PAM-GLOBAL® EPAMS® System
trenches, shafts or buried pipes
Price advantage gained by
Easier installation shortens lower material and labor DN 50 DN 80
construction time costs
DN 100
Slab can be cast immediately
Capacity:
Up to 24 l/s
Accessories:
Galvanized steel connector flange, 600x800 mm
(for trapezoidal sheet metal roof)
Stainless steel connector flange
as a loose and fixed flange combination, ø325 mm
(for concrete roof)
Inspection chamber (for inverted or landscaped roofs, where
allowed by local regulations)
Heating strip, PUR 10 Watt, 230 V
40
PAM-GLOBAL ® Syphonic Rainwater Drainage System
Capacity:
PAM-GLOBAL® INO-
Up to 24 l/s (DN 80)
GGG Flat-Roof Outlet
In Cast Iron
Accessories:
Insulating bodies made of cellular glass for thermal insulation
Heating strip, 20 Watt, 230 V
Capacity:
Up to 4 l/s (DN 50)
Up to 8 l/s (DN 80)
41
REFERENCES
42
Productions Sites
• Audi cars Works (Germany)
• Cadburys Factory (Russia)
• Eon RWE Energiezentralen (Netherlands)
• Factory “Tetra Pack” Lobny ( Moscow region) (Russia)
• Factory General Motors (Russia)
• Factory Volkswagen (Russia)
• Perfetti van Melle Sweet Factory (Netherlands)
• Porsche Cars (Germany)
• Renault Factory (Turkey)
• Technology Park (Slovenia)
Public Buildings
• Administration Building of Luxembourg County (Luxemburg)
• Centre Socio-Culturel, Luxembourg (Luxemburg)
• Chambre of Commerce (Luxemburg)
• Cours des Comptes Européenne (Luxemburg)
• European Community Conference Center (Luxemburg)
• German Embassy (Russia)
• Latvian National Library (Latvia)
• Metro Line (Turkey)
• N.A.T.O. Bases (Turkey)
• Palais de Justice de Paix, Esch/Alzette (Luxemburg)
• Parliament and Government Building (Germany)
• Parliament Building (Hungary)
• Philharmonie Music Hall (Luxemburg)
• Railway Station "Lehrter Bahnhof" (Germany)
• Railway Station Central (Ukraine)
• Rijaset Islamske Zajednice (Bosnia)
• Sabanci University (Turkey)
• Youth Centre Astana (Kazakhstan)
Residential Build.
• Baranovitchi Military Housing (Russia)
• Baytur Residentiazl Buildings (Turkey)
• Housing “Panorama Plaza” (Latvia)
• Housing complex “Begowaya”, “Kutusov Riviera”, “MIRAX-Park" (Russia)
• Housing complex “Jantarny Gorod” (Russia)
• Mashattan Towers (Turkey)
• Moscow City, pilot 13, Federation Tower A (Russia)
• Moscow City, pilot 4, Imperia Tower (Russia)
• Moscow City, pilot 9, Gorod Stolitz, High Rise Building (Russia)
• Slonim Military Housing (Russia)
• Vila Urbana (Slovenia)
Stadiums
• Ice Arena (Russia)
• Olimpia Stadium (Turkey)
• Olympic Sport Center (Latvia)
• Olympic Stadium (Ukraine)
• Schalke-Arena Stadium (Germany)
• StadiumAllianz-Arena (Germany)
43
Contents
About Us 6
PAM-GLOBAL® Systems 8
Environmental Awareness 18
References 42-43
7
Cast Iron Drainage Systems
Saint-Gobain PAM
Head Office
91. Avenue de la libération
54076 NANCY Cedex
France