Professional Documents
Culture Documents
MOD INTERFREQHOGROUP:LOCALCELLID=13,INTERFREQHOGROUPID=0,FREQPRIINTERFREQHOA1THDRSRP=-90,FREQPRIINTE
Cell Status DSP UCELL (RNC)
Cell Information LST UCELL (RNC)
QUALMEAS=CPICH_ECNO
TRESELECTIONS=1
QQUALMIN=-18
QRXLEVMIN=-58
IDLESINTRASEARCH=5
IDLESINTERSEARCH=4
SSEARCHRAT=2
z
DR_RAB_SING_DRD_SWITCH = Activated
SERVICEDIFFDRDSWITCH=ON
SPGID of F1 = 2, SPGID of F1 =1
F1 = CELLRESERVEDFOROPERATORUSE=NOT_RESERVED.
F2 = CELLRESERVEDFOROPERATORUSE=RESERVED
F2 Cell HSDPA state=ACTIVATED
ALLOCCODEMODE=Auto
Max Code Number for HS-PDSCH=10 (All cells)
Code Number for HS-SCCH=4(All cells)
Max HS-PDSCH Code Number should be equal to design data(60)
Accoring to cluster design data from customer, F1 <-> F2 is defined.
HLR assigned bandwidth for UE
Total users in the cell
TCP power in the cell
Any Service affected alarm/event?
HSUPA Enable or not LST UCELLHSDPA (RNC)
Inter-Freq Neighbor LST UCELLINTERFREQHO
Monitor > UE Connection > DL (RNC)
throughput
UE connection monitor (RNC)
Monitor > Cell Connection > User Number
Cell connection monitor (RNC)
UL RTWP Monitor > Cell Connection > RTWP (RNC)
Alarm/Event Monitoring Query in M2000 (RNC)
Cell HSUPA
Accoring state=ACTIVATED
to cluster design data from customer, make sure F1 <-> F2 is
defined.
HLR bandwidth assigned for UE
Total users in the cell
RTWP of the cell
Any Service affected alarm/event?
3G to 3G Soft Enable or not LST UCORRMALGOSWITCH. (RNC)
LST UEXT3GCELL (RNC)
Intera Freq Neighbor LST UINTRAFREQNCELL (RNC)
LST UINTRAFREQHO (RNC)
Threshold LST UCELLINTRAFREQHO (RNC)
Alarm/Event Monitoring Query in M2000 (RNC)
3G HSDPA/HSUPA check DSP UCELLCHK
HO_INTRA_FREQ_SOFT_HO_SWITCH= Activated.
2G to 3G Reselection Enable or
not LST GCELLCCUTRANSYS (BSC)
LST GEXT3GCELL (BSC)
Inter RAT Freq Neighbor LST G3GNCELL(BSC)
Alarm/Event Monitoring Query in M2000 (BSC)
INTERRATCELLRESELEN = YES
Send2QuterFlag = YES
QCI= Use_Qsearch_I
QP=7
QI=7
FDDQMIN = 7
FDDQOFF =0
FDDREP = EcNo
MEASURETYPE=EnhMeasReport
2G to 3G neighbor defination
2G to 3G neighbor defination
Any Service affected alarm/event?
453670447.xls Security Level
Below is the event 2d2f(compress mode) trigger threshold, you may use this to control the ir
CS Service
InterRATCSThd2DEcN0 = Threshold of triggering inter-RAT measurement for CS services when measurement qua
InterRATCSThd2FEcN0 = Threshold of stopping inter-RAT measurement for CS services when measurement quan
InterRATCSThd2DRSCP = Threshold of triggering inter-RAT measurement for CS services when measurement qu
InterRATCSThd2FRSCP = Threshold of stopping inter-RAT measurement for CS services when measurement qua
PS R99 Service
InterRATR99PsThd2DEcN0 = Threshold of triggering inter-RAT measurement for PS domain non-HSPA services w
InterRATR99PsThd2FEcN0 = Threshold of stopping inter-RAT measurement for PS domain non-HSPA services wh
InterRATR99PsThd2DRSCP = Threshold of triggering inter-RAT measurement for PS domain non-HSPA services w
InterRATR99PsThd2FRSCP = Threshold of stopping inter-RAT measurement for PS domain non-HSPA services w
HS Service
InterRATHThd2DEcN0 = Threshold of triggering inter-RAT measurement for HSPA services when measurement qu
InterRATHThd2FEcN0 = Threshold of stopping inter-RAT measurement for HSPA services when measurement qua
InterRATHThd2DRSCP = Threshold of triggering inter-RAT measurement for HSPA services when measurement q
InterRATHThd2FRSCP = Threshold of stopping inter-RAT measurement for HSPA services when measurement qu
his to control the irat handover by changing the cellid for DT SSV test case purpose.
2FRSCP=-50, InterRATHThd2FRSCP=-50;
LST UEXT3GCELL
LST UEXT2GCELL
ALLOCCODEMODE=manual
DHK0183,230,115
reserved/unreserved(cell access)
#NAME?
DSP RETDEVICEDATA:DEVICENO=0;
HARIMU
+++ HARIMU 2014-07-01 14:17:23
O&M #80491
%%/*95585*/DSP RETDEVICEDATA:DEVICENO=0;%%
RETCODE = 0 Operation succeeded.
yump
ktol
------------------------------
Device No. Subunit No. Subunit Name Connect Port 1 Cabinet No. Connect Port 1 Subrack No. Connect
0 1 RET_S1_W2100 0 80 0
1 1 RET_S2_W2100 0 81 0
2 1 RET_S3_W2100 0 82 0
3 1 RET_S1_W900 0 83 0
4 1 RET_S2_W900 0 84 0
5 1 RET_S3_W900 0 85 0
(Number of results = 6)
#NAME?
LST RETDEVICEDATA:;
HARIMU
+++ HARIMU 2014-07-01 14:31:23
O&M #80539
%%/*98147*/LST RETDEVICEDATA:;%%
RETCODE = 0 Operation succeeded.
0 UNUSED 0 0 UNUSED 0 0
0 UNUSED 0 0 UNUSED 0 0
0 UNUSED 0 0 UNUSED 0 0
0 UNUSED 0 0 UNUSED 0 0
0 UNUSED 0 0 UNUSED 0 0
0 UNUSED 0 0 UNUSED 0 0
o. Connect Port 2 Subrack No. Connect Port 2 Slot No. Connect Port 2 Port No. Tilt(0.1degree) Tilt Alarm Err
h3(degree) Gain3(0.1dBi) Band4 Beamwidth4(degree) Gain4(0.1dBi) Installation Date Installer's ID Base Sta
5
5
5
5
5
5
BCCCH CHANGE
LST GTRX
LST GCELL
LST GNCELL
IB1_3 ", TRXIDTYPE=BYID;%%
Type(w) eGBTS Power Type(0.1dBm) TRX Priority Shut Down Enabled TCH Rate Adjust Allow TRX 8PSK Level Power Finetune Receive Mode
CASRMU
ower Finetune Receive Mode Send Mode Allow Dynamic Shutdown of TRX Power Unit Timeslot Power Reserve Timeslot Power Reserve(
<NULL> 15 <NULL> 8
<NULL> 15 <NULL> 8
<NULL> 15 <NULL> 8
<NULL> 15 <NULL> 8
<NULL> 15 <NULL> 8
0.1dBm) Power Overload Threshold In Ho. In Power Overload Threshold In Ho. In(0.1dBm) Frequency Reuse Mode Priority of Shut Down TRX
Level0 0 0 No
Level1 0 0 No
Level1 0 0 No
Level1 0 0 No
Level1 0 0 No
um Sharing Shutdown Allowed Target CIR for IBCA MAIO Configured on TRX TRX Logical Lock Switch Cell Index
2G Cell Parameters(GCELLHOBASIC)(HOTHRES)
2G Cell Parameters(GCELLHOBASIC)(LEVHOHYST)
2G Radio Network planning (Adjacent Cell Inter-layer HO Hysteresis)(INTELEVHOHYST)
=
=
Inter-layer handover threshold of the serving cell = Inter-layer HO threshold - Inter-layer HO Hyst
Inter-layer handover threshold of a neighboring cell = Inter-layer HO Threshold + Adjacent Cell Int
yer HO Hysteresis - 64.
MO HOSwitch
12.
SET UCORRMALGOSWITCH HO_INTRA_FREQ_DETSET_INTO_ACTSET_SWITCH:
When the switch is on the cells in the detected set from which the RNC
receives their valid event reports can be added to the active set. The
cells allowed to be added to the active set must be the neighboring cells
of the cells in the active set. RNC