Air Servo Cylinder IN-777 Repeatability for the stopping position: ±0.5 mm Servo valve and controller integrated cylinder Built-in position sensor The servo valve controls the flow rate on Output the cylinder head side and the rod side. Input PLC
Self diagnosis function
Position sensor Controller
Servo valve
Air supply Air exhaust port
port
PWR : Power supply
CTR : Controller Air cylinder CYL : Position sensor VAL : Valve RF : Rod friction
IP67 Application Example
Cylinder control for maintaining a liquid level position Ambient temperature: PLC
−20°C to 60°C (No freezing) Air servo cylinder
Applicable to cylinders with
Sensor diameters of ø125 to ø400 Input signal: 4 to 20 mA Water supply Liquid level Maintains a water level by using the signal of With stroke position signal a sensor, etc., to open and close the valve for output function (4 to 20 mA) tank water level adjustment Tank HART transmission With auto calibration function Valve Discharge Supports the fail safe function The application described here is for reference only and performance is not guaranteed. For actual usage in various other applications, please conduct thorough evaluation and Caution validation testing in order to determine the feasibility under your actual usage conditions. Furthermore, please contact your local SMC sales representative for individual pricing and delivery verification.
During A Cold Start, The Intake Heater Is Activated (90 Sec. Max.) To Increase The Intake Temperature. - Control Enabled When: A. Ignition Switch ON and B. Cooling Water Temperature Less Than 40 °C