Professional Documents
Culture Documents
RO CONTROLLER
Aquatrol AQT-EC-100
controls the signals from dry contacts on the start-up and shut down of your Reverse Osmosis system
and monitors the signals continuously according to the desired program.
Signals and records available:
Aquatrol AQT-EC-100 Controller comes with TDS sensor included and is easy to program with
just 6 parameters.
AQT-EC-100
RO CONTROLLER
AQT-EC100
CONTROL VA LV ES
10
6
9
7
11
2 4
8
3 12
1
System especifications:
Power 120V/220V, 60 Hz
Electric Load 2 Amps
Signal capacity 2 Amps
Dimensions 4 5/8" X 3.5" inches
EQUIPMENT DESCRIPTION:
High Level switch
Low pressure switch 1. Raw water storage tank
2. Low pressure switch on raw water storage tank
Lockout switch
Input Signals 3. Raw water pump
Inlet Power
4. Filter/Water softener
TDS sensor 5. Low pressure switch
Low level switch 6. High pressure pump RO system
7. Inlet solenoid valve
Inlet solenoid valve
8. RO membrane
Fast Flush solenoid valve 9. Fast Flush solenoid valve
Output signals*
Contactor through signal coil high pressure pump 10. TDS meter
Contactor through signal coil for main pump 11. High level switch permeate water
12. Permeate water storage
Internal Power
Fuse 3 watts
protection
Distributed by:
WWW.AQUATROLTECH.COM