Professional Documents
Culture Documents
TechnicalSpecification DCB 72-800kV EN 2015-10-23
TechnicalSpecification DCB 72-800kV EN 2015-10-23
Based on
International Electrotechnical Commission (IEC)
1(20)
Technical Specification Disconnecting Circuit Breakers
Specification identification: DCB 72,5 – 800 kV
Create date: 2015-10-23
TABLE OF CONTENT
1 DISCONNECTING CIRCUIT BREAKERS .................................................................... 3
1.1 SCOPE .................................................................................................................... 3
1.2 GENERAL REQUIREMENTS ........................................................................................ 3
1.3 STANDARDS ............................................................................................................ 3
1.4 SERVICE CONDITIONS .............................................................................................. 3
1.5 DISCONNECTING CIRCUIT BREAKER RATINGS ............................................................. 3
1.6 DESIGN REQUIREMENTS ........................................................................................... 4
1.6.1 Density monitoring ............................................................................................. 4
1.6.2 Operating mechanisms disconnecting circuit breaker ......................................... 4
1.6.3 Locking Mechanism disconnecting circuit breaker .............................................. 5
1.6.4 Earthing switch (if applicable) ............................................................................. 5
1.6.5 Electrical interlocking disconnecting circuit breaker ............................................ 6
1.6.6 Support structures .............................................................................................. 6
1.6.7 Central control cabinet/Integrated control cabinet (when applicable) .................. 6
1.6.8 Controlled switching (when applicable) .............................................................. 7
1.7 TESTS ..................................................................................................................... 8
1.7.1 Type tests on disconnecting circuit breakers ...................................................... 8
1.7.2 Routine tests on disconnecting circuit breakers .................................................. 8
2 TECHNICAL SCHEDULE DISCONNECTING CIRCUIT BREAKER ............................. 9
3 REVISION HISTORY....................................................................................................20
TABLE OF FIGURES
Table 1 Electrical interlocking scheme of DCB ...................................................................... 6
Table 2 Zink coating table ..................................................................................................... 6
Table 3 Ambient and site conditions ...................................................................................... 9
Table 4 General and common data for all disconnecting circuit breakers .............................. 9
Table 5 Specification DCB 72.5kV ........................................................................................10
Table 6 Specification DCB 123kV .........................................................................................11
Table 7 Specification DCB 145kV .........................................................................................12
Table 8 Specfication DCB 170kV .........................................................................................13
Table 9 Specification DCB 245kV .........................................................................................14
Table 10 Specification DCB 300kV .......................................................................................15
Table 11 Specification DCB 362kV .......................................................................................16
Table 12 Specification DCB 420kV .......................................................................................17
Table 13 Specification DCB 550kV .......................................................................................18
Table 14 Specification DCB 800kV (Not Applicable for 60Hz) ..............................................19
2(20)
Technical Specification Disconnecting Circuit Breakers
Specification identification: DCB 72,5 – 800 kV
Create date: 2015-10-23
3(20)
Technical Specification Disconnecting Circuit Breakers
Specification identification: DCB 72,5 – 800 kV
Create date: 2015-10-23
4(20)
Technical Specification Disconnecting Circuit Breakers
Specification identification: DCB 72,5 – 800 kV
Create date: 2015-10-23
The wiring in the cabinet should be carried out with stranded copper cable
with sufficient cross-section area to withstand the currents flowing in auxiliary,
control and motor circuits. The cables should be marked along its’ whole
length with wiring number and destination.
1.6.3 Locking Mechanism disconnecting circuit breaker
The Locking mechanism for the DCB shall provide the following:
When DCB is locked in open position, operation of the circuit breaker should
be both mechanically locked and electrically disabled.
Motor operation from remote or local. Manual operation as backup.
Electrical interlocking between the DCB, and if applicable earth switch, for
safe operation according to Table 1 Electrical interlocking scheme of DCB.
A facility shall be provided to externally padlock the DCB in “locked” position.
The padlock holes shall be accessible from the ground level.
The indication of DCB being locked in open position shall be visible from
ground level, by use of suitable indication, with the control cabinet door
closed.
1.6.4 Earthing switch (if applicable)
The Earthing switch for the disconnecting circuit breaker (DCB) shall contain the
following features:
The earthing switches shall be motor-operated with manual operation as a
back-up. The mechanism shall be equipped with a mechanical lever for
manual operation during maintenance and emergency operation. When the
lever is used, the motor circuit shall be isolated.
The operating mechanism should be located in painted aluminum cabinet,
same requirements for corrosion resistance and degree of protection as the
operating mechanism of the disconnecting circuit breaker.
A heating element shall be included in the operating mechanism of the
earthing switch.
The earthing switch shall be operated by a motor connected to the operating
shaft, either directly or through a gear train.
The motor shall be operated remotely or at disconnecting circuit breaker
control cabinet and should be protected by a miniature circuit breaker.
When the earthing switch has reached its end position, the motor circuit shall
be interrupted by a limit switch.
Selector switch [REMOTE-LOCAL-DISCONNECTED] for earthing switch
should be common with the disconnecting circuit breaker selector switch and
located the disconnecting circuit breaker operating mechanism or in the
central control cabinet.
Connection from disconnecting circuit breaker is made by quick connection
terminals.
Electrical interlocking between the DCB, and locking device, for safe operation
according to Table 1 Electrical interlocking scheme of DCB.
Pad-lockable in open and closed position
5(20)
Technical Specification Disconnecting Circuit Breakers
Specification identification: DCB 72,5 – 800 kV
Create date: 2015-10-23
The requirements specified for the control panel, terminals and internal cabling in
the disconnecting circuit breaker operating mechanism are also valid for the
operating mechanism for the earthing switch.
1.6.5 Electrical interlocking disconnecting circuit breaker
Closed Yes No No
>6 115
3-6 95
1-3 70
The support structure should be of a sufficient height, providing minimum 2.25 meters
ground clearance to lower part of insulator.
1.6.7 Central control cabinet/Integrated control cabinet (when applicable)
Applicable for single pole operated disconnecting circuit breakers. In order to achieve
local three-pole operation of single-pole operated disconnecting circuit breakers, a
central control cabinet (CCC)/integrated control cabinet (ICC) should be provided.
The central cabinet should include selector switches for operation and position
selection as described under Operating mechanisms disconnecting circuit breaker
6(20)
Technical Specification Disconnecting Circuit Breakers
Specification identification: DCB 72,5 – 800 kV
Create date: 2015-10-23
above.
The requirements for internal cabling and terminals in the operating mechanism
cabinets are otherwise valid.
1.6.8 Controlled switching (when applicable)
Controlled switching by means of adaptive type will be the preferred method, unless it
can be proven by field experience that said method does not dramatically improve
system reliability/operability.
For energizing of no-load transformers, controlled switching by means of remnant flux
calculation is preferable; however this shall be observed on a case-by-case basis,
depending on field experience with similar system configuration characteristics.
7(20)
Technical Specification Disconnecting Circuit Breakers
Specification identification: DCB 72,5 – 800 kV
Create date: 2015-10-23
1.7 Tests
1.7.1 Type tests on disconnecting circuit breakers
The following mandatory type tests should be carried out in accordance with IEC
62271-108:
Dielectric tests
Radio interference tests
Measurement of the resistance of the main circuit
Temperature rise tests
Short-time withstand current and peak withstand current tests
Verification of the degree of protection
Tightness tests
Mechanical (M1/M2 class) and environmental tests
Basic short-circuit test duties
Short-line fault tests
Out-of-phase making and breaking tests
Capacitive current switching tests
Tests to verify the proper function of the position indicating device
Electrical Endurance Combined Function Test
Mechanical Endurance Combined Function Test
In addition to the mandatory type tests as per IEC 62271-108, the following tests
should be carried out when applicable:
Switching of shunt reactors in accordance with IEC 62271-110
If required by geographic location, seismic withstand verifications are
recommended as per guideline IEC 62271-300. Calculations of the circuit
breakers withstand capability against seismic action are also acceptable.
Type tests shall be performed by an independent accredited European laboratory. If
the manufacturer can show evidence through certified reports on performed type
tests on the disconnecting circuit breakers, the requirements for execution of tests
can be waived.
1.7.2 Routine tests on disconnecting circuit breakers
The disconnecting circuit breakers shall be routine tested in accordance with
IEC 62271-108.
Eventual Earthing switch may be tested separately as long as interlocking in secured
according to circuit diagram.
8(20)
Technical Specification Disconnecting Circuit Breakers
Specification identification: DCB 72,5 – 800 kV
Create date: 2015-10-23
Table 4 General and common data for all disconnecting circuit breakers
9(20)
Technical Specification Disconnecting Circuit Breakers
Specification identification: DCB 72,5 – 800 kV
Create date: 2015-10-23
10(20)
Technical Specification Disconnecting Circuit Breakers
Specification identification: DCB 72,5 – 800 kV
Create date: 2015-10-23
11(20)
Technical Specification Disconnecting Circuit Breakers
Specification identification: DCB 72,5 – 800 kV
Create date: 2015-10-23
12(20)
Technical Specification Disconnecting Circuit Breakers
Specification identification: DCB 72,5 – 800 kV
Create date: 2015-10-23
13(20)
Technical Specification Disconnecting Circuit Breakers
Specification identification: DCB 72,5 – 800 kV
Create date: 2015-10-23
14(20)
Technical Specification Disconnecting Circuit Breakers
Specification identification: DCB 72,5 – 800 kV
Create date: 2015-10-23
15(20)
Technical Specification Disconnecting Circuit Breakers
Specification identification: DCB 72,5 – 800 kV
Create date: 2015-10-23
16(20)
Technical Specification Disconnecting Circuit Breakers
Specification identification: DCB 72,5 – 800 kV
Create date: 2015-10-23
17(20)
Technical Specification Disconnecting Circuit Breakers
Specification identification: DCB 72,5 – 800 kV
Create date: 2015-10-23
18(20)
Technical Specification Disconnecting Circuit Breakers
Specification identification: DCB 72,5 – 800 kV
Create date: 2015-10-23
19(20)
Technical Specification Disconnecting Circuit Breakers
Specification identification: DCB 72,5 – 800 kV
Create date: 2015-10-23
3 REVISION HISTORY
20(20)