Professional Documents
Culture Documents
Introduction
The check-in conveyor is the interface between the passenger and the baggage handling system. It is
designed to ensure easy loading capacity.
Function
The check-in conveyor is designed to weigh baggage and dispatch it onto the collector conveyor without
the need for manual lifting.
Whilst there are standard configurations available, it is sufficiently flexible to accommodate variations in
height, length and width.
Daifuku ATec’s range of weigh, label, tub load and dispatch conveyors can be configured into one, two,
three or four stage check-in arrangements, i.e.
One stage Bags are weighed, labelled and then dispatched onto the collector conveyor
using a single weigh conveyor.
Two stage The weighing and labelling operations are carried out on a single conveyor and
bags are then dispatched via the induct conveyor onto the collector conveyor.
Three stage Separate conveyors are used for weighing, labelling and then dispatch of the
bags onto the collector conveyor.
Four stage Separate conveyors used for weighing, labelling, tub loading and then dispatch
of the bags onto the collector conveyor.
Features
Ergonomic design.
The tub load feature is available in two, three and four stage design reducing the amount of lifting
the check-in personnel have to perform.
Lift off side panels allow for easy maintenance.
Roll out system allows for easy access for cleaning hence reducing fire risk.
High quality stainless steel finish.
Designed to eliminate trap points for fingers, straps and labels.
Technical Data
The check-in conveyors are finished in high quality stainless steel. As a standard they are designed to
eliminate trap points for passengers, operators, bag straps and labels. Safety gates may be fitted to the
weigh conveyors as a security measure, preventing passengers from entering the check-in areas when
the desks are closed.
Mechanical Specifications
General Dimensions
Dispatch
Weigh Label Tub Load
(induct)
Conveyor Conveyor Conveyor
Conveyor
Overall Length & The overall The overall The overall The overall
Width length and width length and width length and width length and width
of the weigh of the label of the tub load of the dispatch
conveyor may conveyor may conveyor is may conveyor may
be varied, be varied, be varied, be varied,
depending upon depending upon depending upon depending upon
the specific the specific the specific the specific
contractual contractual contractual contractual
requirements. requirements. requirements. requirements.
Standard Lengths 1200 mm 1200 mm 1200 mm 1200 mm
Available 1500 mm
2000 mm
(single stage)
Belt Width 588 mm 588 mm 588 mm 588 mm
Belt Speed 0.5 m/sec 0.5 m/sec 0.5 m/sec 0.5 m/sec
Height (to top of 475 mm 475 mm 475 mm 475 mm
panelling)
Height (to top of belt 240 mm 240 mm 240 mm 240 mm
front) nominal nominal nominal nominal
Height (to top of belt 380 mm 380 mm 380 mm 380 mm
rear) nominal nominal nominal nominal
Drive Roller Width 562 mm RL 562 mm RL 562 mm RL 562 mm RL
Between Side Panel 596 mm 596 mm 596 mm 596 mm
Width
Weighing Capacity 150 kgs N/A N/A N/A
Live Load/Unit 60 kgs / unit 60 kgs / unit 60 kgs / unit 60 kgs / unit
Static Capacity 120 kgs 120 kgs 120 kgs 120 kgs
General Specifications
Drive Specifications