Professional Documents
Culture Documents
GENERAL JANUARY
CATALOGUE
2013
HEAD OFFICE
MAPEI S.p.A.
Via Cafiero, 22 - 20158 Milan
Tel. +39-02-37673.1
Fax +39-02-37673.214
Internet: www.mapei.com
E-mail: mapei@mapei.it
C.P. MK 670030 - (GB) 1/2013
50 6. SYSTEMS FOR LAYING AND GROUTING PORPHYRY AND INTERLOCKING STONE
88 10. COMPLEMENTARY PRODUCTS FOR LAYING CERAMIC TILES, STONE MATERIAL, PARQUET,
RESILIENT AND TEXTILE COVERINGS
90 10.1 Complementary products for laying ceramic tiles and stone material
91 10.2 Complementary products for laying resilient and textile coverings
92 10.3 Accessories, abrasive disks and products for the maintenance of parquet
132 15. ADHESIVES AND SMOOTHING COMPOUNDS FOR CELLULAR CONCRETE BLOCKS
146 17. SMOOTHING AND PROTECTIVE PRODUCTS FOR CONCRETE AND RENDER SURFACES
158 19. PRODUCTS FOR STRUCTURAL BONDING, SCREED REPAIRING AND INJECTING INTO CRACKED
CONCRETE
230 27. VAGA - AGGREGATES AND MORTARS FOR THE BUILDING INDUSTRY
232 27.1 Mortars for the building industry
234 27.2 Damp aggregates for the building industry
235 27.3 Dry aggregates for the building industry
4 * VAGA Products
PAGE PAGE PAGE
Mapelectric CP1 91 Planitop 217 150 Thinner PU 33
Mapelux Lucida 113 Planitop 400 143 TICINO* 235
Mapelux Opaca 114 Planitop 510 150 Tixobond White 40
Mapenet 150 213 Planitop 517 150 Topcem 14
Mapeprim SP 28 Planitop 530 150 Topcem Pronto 15
Mapeproof 207 Planitop 540 151 Triblock Finish 152
Mapeproof CD 207 Planitop 560 151 Triblock P 33
Mapeproof LW 207 Planitop 580 151 Triblock TMB 109
Mapeproof Mastic 208 Planitop Fast 330 18/151
Mapeproof Seal 208 Planitop HDM 175 U Ultrabond Aqua-Contact 78
Mapeproof Swell 208 Planitop HDM Maxi 176 Ultrabond Aqua-Contact Cork 78
Mapequarz 90 Planitop HDM Restauro 176 Ultrabond Eco 170 79
Maperod C 170 Planitop HPC 175 Ultrabond Eco 185 79
Maperod G 170 Planitop Smooth & Repair 144 Ultrabond Eco 310 79
Mapescreed 704 15/225 Planopur 17 Ultrabond Eco 350 79
Mapeshield E 25 138 Plastimul 208 Ultrabond Eco 375 80
Mapeshield I 138 Plastimul 1K Super Plus 209 Ultrabond Eco 380 80
Mapeshield S 164 Plastimul 2K Plus 209 Ultrabond Eco 520 80
Mapesil 300°C 56 Plastimul 2K Reactive 209 Ultrabond Eco 540 80
Mapesil AC 56/219 Plastimul 2K Super 209 Ultrabond Eco 571 2K 84
Mapesil BM 59 Plastimul Primer 210 Ultrabond Eco 575 67
Mapesil LM 59 Porocol 134 Ultrabond Eco Fix 81
Mapesil Z 56 Porocol FF 134 Ultrabond Eco P992 1K 67
Mapesil Z Plus 56 PoroMap Finitura 126 Ultrabond Eco S945 1K 67
Mapesilent Band R 22 PoroMap Intonaco 124 Ultrabond Eco S955 1K 67
Mapesilent Panel 22 PoroMap Intonaco Macchina 124 Ultrabond Eco Tack 81
Mapesilent Roll 22 PoroMap Rinzaffo 125 Ultrabond Eco Tack LVT 81
Mapesilent Tape 22 PoroMap Rinzaffo Macchina 125
Ultrabond Eco V4 SP 81
Mapesilent Underwall 23 Primer 3296 29/122
Ultrabond Eco V4 SP Conductive 82
Mapesonic CR 23 Primer BI 29/214
Mapesonic Strip 23 Primer EP 29/62 Ultrabond Eco V4 SP Fiber 82
Mapestone PFS 2 52 Primer EP Rustop 30/108 Ultrabond Eco VS90 82
Mapestone PFS PCC 2 52 Primer FD 62 Ultrabond MS Rapid 61
Mapestone TFB 60 52 Primer for Aquaflex 210 Ultrabond P-R9 93
Mapestop 123 Primer G 30 Ultrabond P902 2K 68
Mapetard 225 Primer G Conductive 30/92 Ultrabond P913 2K 68
Mapetex Sel 213 Primer KL 30 Ultrabond P980 1K 68
Mapetex System 91 Primer M 31/63 Ultrabond P990 1K 68
Mapetherm AR1 180 Primer MF 31 Ultrabond S965 1K 69
Mapetherm AR1 GG 180 Primer MF EC Plus 31 Ultrabond S997 1K 69
Mapetherm Ba 180 Primer P 31/63 Ultrabond Super Grip 61/82
Mapetherm Cork 181 Primer PU60 32/63 Ultrabond Turf 2 Stars 84
Mapetherm Dripnose Bead 181 Primer S 32 Ultrabond Turf PU 1K 84
Mapetherm EPS 181 Primer SN 32/108 Ultrabond Turf PU 1K LC 84
Mapetherm FIX 181 Primer SN Rasante 109 Ultrabond Turf PU 2K 85
Mapetherm FIX 9 182 Primer W-AS 109 Ultrabond Turf Tape 100 85
Mapetherm FIX B 182 Prosfas 32 Ultracoat Aqua Plus 70
Mapetherm M. Wool 182 PU Catalyst 114 Ultracoat Binder 70
Mapetherm Net 182 Pulicol 2000 92 Ultracoat Clean Polish 93
Mapetherm Profil 183 Purtop 400 M 214 Ultracoat Clean WPM 93
Mapetherm Profil Ba 183 Purtop 600 214 Ultracoat Easy Plus 70
Mapetherm Profil E 183 Purtop 1000 214 Ultracoat EL 70
Mapetherm Profil V 183 Purtop HA 215 Ultracoat High Traffic 71
Mapetherm Profil W 184 Purtop Primer Black 215 Ultracoat Oil 71
Mapetherm Tile Fix 15 91 Ultracoat Oil Care 71
Mapetherm XPS 184 Q Quartz 0.25 114 Ultracoat Pad 93
Mapetop N AR6 110 Quartz 0.5 114 Ultracoat Polish Remover 94
Mapewood Gel 120 130 Quartz 1.2 33 Ultracoat Premium Base 71
Mapewood Paste 140 130 Quartz 1.2 115 Ultracoat Roller Combi 94
Mapewood Primer 100 130 Quartz 1.9 115 Ultracoat Roller Finish 94
MapeWrap 11 171 Quarzolite Base Coat 196 Ultracoat Roller Oil 94
MapeWrap 12 171 Quarzolite Graffiato 197 Ultracoat Roller Plus 95
MapeWrap 21 171 Quarzolite Paint 197 Ultracoat Roller Quick 95
MapeWrap 31 171 Quarzolite Tonachino 197 Ultracoat SR 95
MapeWrap B UNI-AX 172 Quarzolite Tonachino Plus 197 Ultracoat Steel Spatula 95
MapeWrap C BI-AX 172 Ultracoat Toning Base 72
MapeWrap C FIOCCO 172 R Resfoam 1 KM 210 Ultracoat Universal Base 72
MapeWrap C QUADRI-AX 172 Rete 320 115 Ultracoat Universal Cleaner 96
MapeWrap C UNI-AX 173 Rollcoll 78 Ultracolor Plus 47
MapeWrap EQ Adhesive 173 Ultralite S1 40
MapeWrap EQ Net 173 S Sabbia CEMENTO* 234 Ultralite S1 Quick 41
MapeWrap G FIOCCO 173 SAETTA* 234 Ultralite S2 41
MapeWrap G QUADRI-AX 174 Silancolor AC Paint 198 Ultralite S2 Quick 41
MapeWrap G UNI-AX 174 Silancolor AC Tonachino 198 Ultramastic 2 42
MapeWrap Primer 1 174 Silancolor Base Coat 198 Ultramastic III 42
MapeWrap S Fabric 174 Silancolor Cleaner Plus 198 Ultramastic 5 43
MapeWrap S FIOCCO 175 Silancolor Graffiato 199 Ultraplan 17
MISTA* 234 Silancolor Paint 199 Ultraplan Eco 17
Monofinish 148 Silancolor Paint Plus 199 Ultraplan Maxi 17
Monolastic 213 Silancolor Primer 199 Ultratop 110
Silancolor Primer Plus 200 Ultratop Living 110
N Nivoplan 18/148 Silancolor Tonachino 200 Ultratop Stucco 110
Nivorapid 16 Silancolor Tonachino Plus 200
Silexcolor Base Coat 200
P Pianocem M 16 Silexcolor Graffiato 201 V VAGLIATA* 235
Pianodur R 16 Silexcolor Marmorino 201 VG03S* 235
Planicrete 29/226 Silexcolor Paint 201 VG15* 235
Planigrout 300 157 Silexcolor Primer 201 VG16SS* 236
Planipatch 16 Silexcolor Tonachino 202 VG17FS* 236
Planitop 100 149 Silwood Decking 69 Vinavil 03V 188
Planitop 200 149 Stabilcem 144
Planitop 207 149 W WallGard Graffiti Barrier 202
Planitop 210 149 T Thinner for adhesives 33 WallGard Graffiti Remover Gel 202
5
“Mapei City, Mapei World” PRODUCTS FOR PRODUCTS
BUILDING FOR THERMAL
INSULATION
PRODUCTS FOR
UNDERGROUND
CONSTRUCTIONS
Mapei’s world is one of values based on
the quality of construction work. In “Mapei
ELASTIC SEALANTS City / World”, interpreted and created by
AND ADHESIVES the renowned illustrator Carlo Stanga, each
GRINDING AIDS
FOR CEMENTS one of the most prestigious references
represented is a vivid reminder of one of the
15 Mapei product ranges.
Mapei’s articulated, concrete contribution to
ADMIXTURES the world of construction as a leading player,
FOR CONCRETE each and every day, on the most varied
sites all around the globe, corresponds to
the freedom of expression and fantasy in
each design. Mapei is always by your side,
wherever you are, to make your construction
dreams become a concrete reality.
PRODUCTS FOR
ACOUSTIC INSULATION
PRODUCTS FOR
WOODEN FLOORING
PRODUCTS FOR
STRUCTURAL STRENGTHENING
PRODUCTS FOR
WATERPROOFING
No need
for greenwashing
( )
To develop eco-sustainable products, you cannot wash them green.
You have to invest in research and have your products certified by
internationally recognized institutions.
Mapei’s long-lasting commitment to the environment
results in plenty of products which have been awarded
international certifications and contribute to achieving
eco-sustainable buildings.
DESIGN GUIDE
AN INTERACTIVE MANUAL DEDICATED TO DESIGNERS AND PROFESSIONALS
TO CONSULT OVER THE WEB. FOLLOW THE SIMPLE PROCEDURES AND
DOWNLOAD TECHNICAL SPECIFICATIONS AND DRAWING ATTACHMENTS TO
CARRY OUT LARGE AND SMALL LEED-CERTIFIED PROJECTS IN COMPLIANCE
WITH CURRENT STANDARDS.
p e
TO ENTER
m a i . i t
.
ISTER
w
REG
w w
CERTIFIED QUALITY AND COMMITMENT TO THE ENVIRONMENT
...beyond apparent sustainability
MAPEI APPLIES QUALITY, ENVIRONMENTAL, HEALTH AND SAFETY MANAGEMENT SYSTEMS CERTIFIED ACCORDING TO INTERNATIONAL
STANDARDS ISO 9001, ISO 14001 AND OHSAS 18001
Since 1994, MAPEI SpA Mapei SpA’s Italian-based Both Italian-based Both Mapei SpA’s The group’s main production
has applied a Quality facilities apply an production facilities facilities have been facility also adopts EMAS III
System certified Environmental Management have successfully awarded a Certificate (Environmental
by Certiquality in System certified by Certiquality completed of Excellence, issued Management and Audit
CERTIQUALITY compliance with in compliance with ISO 14001 OHSAS 18001 by Certiquality to Scheme), the European
No. 250
ISO 9001 standards. standards. certification for those facilities which Union’s environmental
The number of MAPEI As with the quality system, this their Occupational have certified quality, management system
group subsidiaries which certification is being applied in Health and Safety environmental and certified according to the
boasts this certification an increasing number of the Management health and safety European Regulation
is increasing each year. group’s facilities. System. management systems. EC 1221/2009.
MAPEI LAYING PRODUCTS AND SYSTEMS COMPLY WITH THE REQUIREMENTS OF THE EUROPEAN CONSTRUCTION PRODUCTS REGULATION
(CPR 305/2011, formerly CPD)
Adhesives for ceramic and stone tiles, renders, screed Other logos indicate the characteristics EW
ITH EUROPEA
N
NC
materials, masonry mortars, products for restoring and of the product according to the designation
ST
LIA
AND
IN COMP
protecting concrete, admixtures for concrete, fixing of the relative European Standards
ARDS
systems, thermal insulation systems, etc. comply with
AD
S
EN 998-1
EN 12004 EN 13813
ILE
SIV
HE
T
IC
European Standards and carry the CE mark, as required ES F
OR CERAM
by the CPR. Special logos are used in catalogues IN COMPLIANCE WITH
EUROPEAN STANDARD
IN COMPLIANCE WITH
EUROPEAN STANDARD
IN COMPLIANCE WITH
EUROPEAN STANDARD
IN COMPLIANCE WITH
EUROPEAN STANDARD
IN COMPLIANCE WITH
EUROPEAN STANDARD
and on technical data sheets to indicate a product EN 1504-2 (C) EN 1504-3 EN 998-1 EN 998-2
R2 GP-CSIII T-M5
PRINCIPLES
which meets the requirements and its relative reference EN 15824 MC-IR
standard, for example:
EN 1504
EN 934
SURFACE PROTECTION RENDERING AND
EXTERNAL AND INTERNAL PLASTERS
REPAIR MORTAR PLASTERING MORTAR
MASONRY MORTAR
BASED ON ORGANIC BINDERS SYSTEMS FOR CONCRETE
LAYING SYSTEMS FOR RESILIENT, TEXTILE, WOOD AND CERAMIC FLOORING AND COATINGS ARE CERTIFIED IN COMPLIANCE WITH THE
“INDOOR AIR QUALITY” REQUIREMENTS OF INTERNATIONALLY-RECOGNISED INSTITUTES AND LABORATORIES
Since 2005 these products, tested and certified by The certification of these And finally, the “Green Label
internationally-qualified institutes, have earned the right to products was recently Plus” mark issued by the Carpet
EMICODE®
GEV carry the “EC1” (very low emission level of volatile organic
compounds) mark, and the “EMICODE EC1 PLUS” (very low
widened to include “Der
Blaue Engel”, a German
and Rug Institute, proves that
a product has been tested and
emission level of volatile organic compounds-PLUS) mark. ecology label which certified by an independent
Both marks are awarded by the GEV Institute (Gemeinschaft identifies products which laboratory, a further guarantee for
Emissionskontrollierte Verlegewerkstoffe, Klebstoffe und respect the environment, clients that they are purchasing
Bauprodukte e.V.), an association which checks emission levels floor layers and end a material which complies with
of products used for floors, adhesives and various materials users. the most severe requirements
used in the building industry, and of which MAPEI is a member. regarding low emissions.
Certification of Mapei’s Quality, Environmental, Health and Safety Management systems are issued by accredited standards bodies
recognised at an international level
A label applied on construction products for internal applications sold in France from the 1st of
A+ A B C
* Information sur le niveau d’émission
de substances volatiles dans l’air intérieur,
A+
présentant un risque de toxicité
par inhalation, sur une échelle de classe
allant de A+ (très faibles émissions)
à C (fortes émissions)
January 2012 (and from 1/9/2013 for products on the market since before this date). It is similar
to the energy efficiency label applied on household appliances, and indicates the class of the product
A+ A B C (A+ is the highest and C is the lowest) regarding the emission of volatile organic compounds (VOC).
* INFORMATION SUR LE NIVEAU D’EMISSION DE SUBSTANCES VOLATILES DANS L’AIR INTERIEUR,
PRESENTANT UN RISQUE DE TOXICITE PAR INHALATION, SUR UNE ECHELLE DE CLASSE
ALLANT DE A+ (TRES FAIBLES EMISSIONS) A C (FORTES EMISSIONS)
Ref. French Decree n° 2011-321 and successive issues.
1.1 Screeds_____________________________________________________________________________________
Mapecem TECHNICAL DATA:
Special quick-setting and drying Recommended mixing ratio: 350÷450 kg of
MAPECEM for 1 m³ of aggregates (diameter from
(24 hours), controlled-shrinkage 0 to 8 mm) and with 80-160 kg of water according
hydraulic binder for screeds. to the moisture content of the inerts.
Workability time: 20-30 minutes.
Set to light foot traffic: after 2-3 hours.
Waiting time before laying:
– 3 hours for ceramic tiles and stone material;
– 24 hours for resilient and wood coverings.
Residual humidity after 24 hours: less than 2%.
Storage: 12 months.
Application: tapping and flattening with a straight
edge.
Consumption: 3.5-4.5 kg/m² per cm of thickness.
Packaging: 20 kg bags.
14
Topcem Pronto TECHNICAL DATA:
Ready-to-use, normal-setting, Mixing ratio: 1 25 kg bags of TOPCEM PRONTO with
1.7 litres of water.
controlled-shrinkage mortar for Workability time: 40-60 minutes.
quick-drying (4 days) screeds. Set to light foot traffic: after 12 hours.
Waiting time before laying: 24 hours for ceramic tiles,
2 days for natural stone and 4 days for resilient and
wood coverings.
EN 13813
Residual humidity after 4 days: less than 2%.
EMICODE: EC1 R Plus - very low emission.
Storage: 12 months.
Application: tapping and flattening with a straight
edge.
Consumption: 18-20 kg/m² per cm of thickness
according to the grade of compacting.
Packaging: 25 kg bags.
NEW
NEW
C25-F7
TECHNICAL DATA:
Self-levelling, fibre-reinforced, quick- A2fl-s1 Where to use: internal ceramic, natural stone, resilient
and wooden floors.
hardening smoothing compounds for Workability time: 20-30 minutes.
thicknesses from 3 to 10 mm. Thickness applied: from 3 to 10 mm.
Particularly recommended for wood. Set to light foot traffic: approx. 3 hours.
Waiting time before laying: 12 hours for ceramic tiles,
natural stone, parquet and resilient coverings.
EN 13813
Colour: pinky grey.
Application: trowel or rake.
EMICODE: EC1 R Plus - very low emission.
Storage: 12 months.
Consumption: 1.5 kg/m² per mm of thickness.
Packaging: 25 kg bags.
15
1. SCREEDS AND SMOOTHING COMPOUNDS
Nivorapid LEVELLING
COMPOUNDS
TECHNICAL DATA:
Quick-drying, thixotropic, cementitious
C40-F10
A2fl-s1 Where to use: internal floors and walls for ceramic,
natural stone, resilient and wooden coatings.
smoothing compound for thicknesses Workability time: 15 minutes.
from 1 to 20 mm, including on vertical Thickness applied: from 1 to 20 mm.
surfaces. Set to light foot traffic: approx. 2 hours.
Waiting time before laying: 4-6 hours for ceramic
tiiles and natural stone, 12 hours for parquet and
EN 13813
resilient coverings.
Colour: grey.
EMICODE: EC1 R Plus - very low emission.
Storage: 12 months.
Application: metal trowel.
Consumption: 1.6 kg/m² per mm of thickness.
Packaging: 25 kg bags.
Pianocem M LEVELLING
COMPOUNDS
C25-F7
TECHNICAL DATA:
Thixotropic cementitious smoothing 2 Where to use: internal floors and walls for resilient
coatings.
compound for thicknesses from 1 to Workability time: 4 hours.
5 mm, including on vertical surfaces. Thickness applied: from 1 to 5 mm.
Set to light foot traffic: from 4 to 24 hours according
to the surrounding temperature.
Waiting time before laying: 3 days for resilient
EN 13813
coverings.
Colour: grey.
Storage: 12 months.
Application: trowel.
Consumption: 1.4 kg/m² per mm of thickness.
Packaging: 25 kg bags.
Planipatch CEMENTITIOUS
SCREED
C35-F7
TECHNICAL DATA:
Fine-grained, ultra quick-drying, 1 Where to use: internal floors and walls for ceramic,
natural stone, resilient and wooden coatings.
thixotropic cementitious smoothing Workability time: approx. 10 minutes.
compound for thicknesses from Thickness applied: from 0 to 10 mm.
0 to 10 mm, including on vertical Set to light foot traffic: approx. 2 hours.
surfaces. Waiting time before laying: 4-6 hours for ceramic
tiles and natural stone, 12 hours for resilient coverings.
EN 13813
EMICODE: EC1 Plus - very low emission.
Colour: grey.
Storage: 12 months.
Application: trowel.
Consumption: 1.5 kg/m² per mm of thickness.
Packaging: 25 kg bags.
16
Planopur TECHNICAL DATA:
Two-component, self-levelling, flexible, Workability time: 20-25 minutes.
Application temperature range: from +10°C to
polyurethane levelling compound for +30°C.
all types of substrate, especially the Set to light foot traffic: after approximately 12 hours.
deformable type. Waiting time before laying: approx. 15 hours.
Colours: Comp. A: beige, comp. B: brown.
Application: rake or smooth metal trowel.
Storage: 24 months.
Consumption: approx. 1.5 kg/m² per mm of
thickness.
Packaging: 14 kg units.
Ultraplan LEVELLING
COMPOUNDS
C30-F7
TECHNICAL DATA:
Self-levelling, ultra quick-hardening A2fl-s1 Where to use: internal floors for ceramic, natural
stone, resilient and wooden coatings.
smoothing compound for thicknesses Workability time: 20-30 minutes.
from 1 to 10 mm. Thickness applied: from 1 to 10 mm.
Set to light foot traffic: approx. 3 hours.
EN 13813
Waiting time before laying: 12 hours for ceramic tiles,
natural stone, resilient and wood coverings.
Application: trowel, rake or pump.
EMICODE: EC1 R Plus - very low emission.
Colour: pinky grey.
Storage: 12 months.
Consumption: 1.6 kg/m² per mm of thickness.
Packaging: 23 kg bags.
Ultraplan Eco CT
LEVELLING
COMPOUNDS
C25-F7
TECHNICAL DATA:
Self-levelling, ultra quick-hardening A2fl-s1 Where to use: internal floors for ceramic, natural
stone, resilient and wooden coatings.
smoothing compound for thicknesses Workability time: 20-30 minutes.
from 1 to 10 mm, with a very low Thickness applied: from 1 to 10 mm.
emission level of volatile organic Set to light foot traffic: approx. 3 hours.
EN 13813
compounds (VOC). Waiting time before laying: 12 hours for ceramic
tiles, natural stone and resilient coverings, 24 hours
for wood.
Application: trowel, rake or pump.
EMICODE: EC1 R Plus - very low emission.
Colour: pinky grey.
Storage: 12 months.
Consumption: 1.6 kg/m² per mm of thickness.
Packaging: 23 kg bags.
C35-F7
TECHNICAL DATA:
Self-levelling, ultra quick-hardening A2fl-s1 Where to use: internal floors for ceramic, natural
stone, resilient and wooden coatings.
smoothing compound for thicknesses Workability time: 30-40 minutes.
from 3 to 30 mm. Thickness applied: from 3 to 30 mm.
Set to light foot traffic: approx. 3 hours.
Waiting time before laying: from 12 to 24 hours for
ceramic tiles and natural stone, from 24 to 72 hours for
EN 13813
resilient and wood coverings (according to thickness).
Application: trowel or pump.
EMICODE: EC1 R Plus - very low emission.
Colour: grey.
Storage: 12 months.
Consumption: 1.7 kg/m² per mm of thickness.
Packaging: 25 kg bags.
17
1. SCREEDS AND SMOOTHING COMPOUNDS
TECHNICAL DATA:
TA
PLI
NDA
IN COM
RDS
Quick-hardening cementitious levelling Where to use: on floors for ceramic and natural stone
ILES
CEME
IC T
coatings.
NT
compound for internal and external
OU
AM
ITI
SA ER
DHESIVE FOR C
IN COMPLIANCE WITH
EUROPEAN STANDARD
EN 1504-2 (C)
PRINCIPLES
MC-IR
SURFACE PROTECTION
SYSTEMS FOR CONCRETE
18
19
PRODUCTS FOR SOUNDPROOFING
2. PRODUCTS FOR SOUNDPROOFING
22
Mapesilent Underwall NEW TECHNICAL DATA:
Elasto-plastomeric soundproofing Thickness: 2.5 mm.
Width: 14 cm and 33 cm.
strip made from bitumen and special Length: 10 m.
polymers sandwiched to a layer of Packaging:
resilient polyester fibre coated with – pallets containing 161 x 14 cm wide rolls.
blue, non-woven polypropylene fabric, – pallets containing 69 x 33 cm wide rolls.
positioned underneath perimeter walls
and partitions.
23
PRIMERS, BONDING PROMOTERS,
CONSOLIDATING AND
WATERPROOFING PRODUCTS
3. PRIMERS, BONDING PROMOTERS, CONSOLIDATING AND WATERPROOFING PRODUCTS
26
Eco Prim T TECHNICAL DATA:
Solvent-free acrylic primer with a very Consistency: fluid liquid.
Colour: white.
low emission level of volatile organic Dilution rate: as is on non-absorbent surfaces, 1 : 1
compounds (VOC) for absorbent and or 1 : 2 on absorbent surfaces.
non-absorbent substrates. Waiting time before applying smoothing
compounds: 1-5 hours according to the surrounding
conditions and the absorption of the substrate.
EMICODE: EC1 Plus - very low emission.
Storage: 12 months.
Application: roller or brush.
Consumption: 0.10-0.20 kg/m².
Packaging: 5 and 20 kg drums.
27
3. PRIMERS, BONDING PROMOTERS, CONSOLIDATING AND WATERPROOFING PRODUCTS
28
Planicrete TECHNICAL DATA:
Synthetic latex rubber to improve Consistency: liquid.
Dry solids content: 40%.
adhesion and strength of cementitious Storage: 24 months.
mortars. Consumption:
– for adhesive slurry: 100-150 g/m²;
– to prepare screeds and render: 50-80 kg/m³.
Packaging: 5, 10 and 25 kg canisters and 12x1 kg
packages.
29
3. PRIMERS, BONDING PROMOTERS, CONSOLIDATING AND WATERPROOFING PRODUCTS
30
Primer M TECHNICAL DATA:
One-component, solvent-free primer Consistency: liquid.
Colour: transparent.
for polyurethane sealants, for use on Inflammable: no.
absorbent and non-absorbent surfaces. Application temperature: from +5°C to +35°C.
Drying time: 40 minutes.
Storage: 12 months.
Application: brush.
Consumption: 1.5-2 g/m (for a 1 cm deep joint).
Packaging: 250 g bottles.
31
3. PRIMERS, BONDING PROMOTERS, CONSOLIDATING AND WATERPROOFING PRODUCTS
32
Quartz 1.2 TECHNICAL DATA:
Calibrated silica sand to improve the Colours: grey - beige.
Grain size: 0.7-1.2.
bond on resin or epoxy primers. Packaging: 25 kg bags.
33
ADHESIVES FOR CERAMIC TILES
AND STONE MATERIAL
4. ADHESIVES FOR CERAMIC TILES AND STONE MATERIAL
TECHNICAL DATA:
TA
PLI
NDA
IN COM
RDS
High-performance, self-buttering, Where to use: floors only.
ILES
CEME
IC T
Pot life of mix: more than 60 minutes.
NT
quick-setting grey cementitious
OU
AM
ITI
SA ER
DHESIVE FOR C
Adesilex P9 E WI
TH EUROPEA
NC EN 12004 S
N
TECHNICAL DATA:
TA
PLI
NDA
IN COM
RDS
High-performance cementitious Pot life of mix: more than 8 hours.
ILES
CEME
IC T
Open time: ≥ 30 minutes.
NT
adhesive with no vertical slip and
OU
AM
ITI
SA ER
DHESIVE FOR C
Adesilex P10 E WI
TH EUROPEA
NC EN 12004 S
N
TECHNICAL DATA:
A
TA
PLI
NDA
IN COM
RDS
IC T
SA ER
DHESIVE FOR C
Elastorapid E WI
TH EUROPEA
NC EN 12004 S
N
TECHNICAL DATA:
A
TA
PLI
C2FTE
NDA
IN COM
Two-component, high-performance, S2
CEMEN
ILES
SA ER
I
DHESIVE FOR C
Waiting time before grouting: 3 hours.
drying cementitious adhesive with no Set to light foot traffic: approx. 2-3 hours.
vertical slip and extended open time Ready for use: approx. 24 hours (3 days for basins and
swimming pools).
for ceramic tiles and stone material Deformability according to EN 12004: S2 - highly
(thickness of adhesive up to 10 mm). EN 12004
deformable.
Colours: grey and white.
Application: N° 4, 5, 6 or 10 notched trowel.
Conformity of Elastorapid is declared Storage: part A: 12 months; part B: 24 months. Protect
in ITT certificate n° 25070277/Gi from frost.
(TUM) and 25080024/Gi (TUM) Consumption: 3-8 kg/m².
Packaging:
issued by the Technische Universität ELASTORAPID white: 31.25 kg kit
München laboratory (Germany). comp. A: 25 kg / comp. B: 6.25 kg.
ELASTORAPID grey: 31.25 kg kit
comp. A: 25 kg / comp. B: 6.25 kg.
36
Granirapid E WI
TH EUROPEA
NC EN 12004 S
N
TECHNICAL DATA:
TA
PLI
C2F S1
NDA
IN COM
RDS
Two-component, high-performance, Consistency: comp. A: powder; comp. B: thick liquid.
ILES
CEME
Mixing ratio: comp. A: 25 kg + comp. B: 5.5 kg.
IC T
deformable, quick-setting and drying
NT
OU
AM
ITI
SA ER
DHESIVE FOR C
Pot life of mix: 45 minutes.
cementitious adhesive for ceramic tiles and Application temperature range: from +5°C to +30°C.
stone material (thickness of adhesive up to Open time: 20 minutes.
10 mm). Setting time: 2 hours.
Set to light foot traffic: 3-4 hours.
Ready for use: 24 hours.
Conformity of Granirapid is declared in EN 12004 Colours available: grey and white.
ITT certificates n° 85330201.101 (SFV) EMICODE: EC1 R Plus - very low emission.
issued by the Säurefliesner-Vereinigung e.V. Storage: 12 months.
Grossburgwedel laboratory (Germany) and Application: N° 4, 5, 6 or 10 notched trowel.
n° 25070279/Gi (TUM), n° 25080057/Gi Consumption: 3-8 kg/m².
Packaging: G RANIRAPID white: 28 kg kit
(TUM) and n° 25080060/Gi (TUM) issued component A: 22.5 kg bag
by the Technische Universität München component B: 5.5 kg drum
laboratory (Germany) and in ITT certificates GRANIRAPID grey: 30.5 kg kit
n° 2008-B-2749/17 and 2008-B- component A: 25 kg bag
2749/21 issued by the MPA Dresden component B: 5.5 kg drum.
Institute (Germany).
Kerabond E WI
TH EUROPEA
NC EN 12004 S
N
TECHNICAL DATA:
A
TA
PLI
NDA
IN COM
RDS
Cementitious adhesive for ceramic tiles Pot life of mix: more than 8 hours.
CEME
ILES
SA RA
DHESIVE FOR CE
37
4. ADHESIVES FOR CERAMIC TILES AND STONE MATERIAL
Kerabond T E WI
TH EUROPEA
NC EN 12004 S
N
TECHNICAL DATA:
TA
PLI
NDA
IN COM
RDS
Cementitious adhesive with no vertical Pot life of mix: more than 8 hours.
ILES
CEME
Open time: 20 minutes.
IC T
NT
slip for ceramic tiles (thickness of
OU
AM
ITI
SA ER
DHESIVE FOR C
Keracrete E WI
TH EUROPEA
NC EN 12004 S
N
TECHNICAL DATA:
TA
PLI
NDA
IN COM
RDS
Synthetic latex rubber mixed with KERACRETE + KERACRETE POWDER:
ILES
CEME
Pot life of mix: 90 minutes.
IC T
NT
KERACRETE POWDER (white or grey)
OU
AM
ITI
SA ER
DHESIVE FOR C
TA
PLI
NDA
IN COM
RDS
IC T
NT
SA ER
DHESIVE FOR C
Keraflex E WI
TH EUROPEA
NC EN 12004 S
N
TECHNICAL DATA:
A
TA
PLI
NDA
IN COM
RDS
IC T
SA ER
DHESIVE FOR C
38
Keraflex Easy E WI
TH EUROPEA
NC EN 12004 S
N
TECHNICAL DATA:
TA
PLI
NDA
IN COM
RDS
Easy-to-apply, high-performance Pot life of mix: more than 8 hours.
ILES
CEME
Open time: > 30 minutes.
IC T
NT
OU
AM
ITI
SA ER
DHESIVE FOR C
Keraflex Maxi S1 CE
WITH EUROPEAN
AN EN 12004 S
TECHNICAL DATA:
TA
PLI
NDA
C2TE S1
IN COM
RDS
High-performance deformable Pot life of mix: more than 8 hours.
ILES
CEME
IC T
Open time: > 30 minutes.
NT
cementitious adhesive with no vertical
IO
AM
IT
US R
ADHE CE
SIVE FOR
Kerafloor E WI
TH EUROPEA
NC EN 12004 S
N
TECHNICAL DATA:
A
TA
PLI
NDA
IN COM
RDS
Cementitious adhesive for ceramic tiles Pot life of mix: more than 8 hours.
CEME
ILES
SA RA
DHESIVE FOR CE
Keraquick E WI
TH EUROPEA
NC EN 12004 S
N
TECHNICAL DATA:
A
TA
PLI
NDA
C2FT S1
IN COM
RDS
ILES
SA ER
DHESIVE FOR C
39
4. ADHESIVES FOR CERAMIC TILES AND STONE MATERIAL
Keraset E WI
TH EUROPEA
NC EN 12004 S
N
TECHNICAL DATA:
TA
PLI
NDA
IN COM
Pot life of mix: 6-8 hours.
RDS
Cementitious adhesive for ceramic tiles
CEME
ILES
Open time: 20 minutes.
CT
NT
(thickness of adhesive up to 5 mm).
OU
MI
ITI
SA RA
DHESIVE FOR CE
Tixobond White E WI
TH EUROPEA
NC EN 12004 S
N
TECHNICAL DATA:
A
TA
PLI
NDA
IN COM
RDS
SA ER
DHESIVE FOR C
Ultralite S1 CE
WITH EUROPEAN
AN EN 12004 S
TECHNICAL DATA:
TA
PLI
NDA
C2TE S1
IN COM
RDS
IC T
US R
ADHE CE
SIVE FOR
40
Ultralite S1 Quick NEW E WI
TH EUROPEA
NC EN 12004 S
N
TECHNICAL DATA:
TA
PLI
NDA
C2FT S1
IN COM
RDS
One-component, high-performance, Pot life of mix: 50 minutes.
CEME
ILES
Open time: ≥ 20 minutes.
IC T
NT
deformable, lightweight, rapid-setting
OU
AM
ITI
SA ER
DHESIVE FOR C
Grouting of joints:
and hydrating cementitious adhesive – on walls: after 2-3 hours.
with no vertical slip, good trowelability, – on floors: after 2-3 hours.
high wetting capacity and very high EN 12004 Set to light foot traffic: 2-3 hours.
yield, for ceramic tiles, stone and thin Ready for use: 24 hours.
porcelain tiles. Colours: grey and white.
Application: N° 4, 5, 6 or 10 notched trowel.
Deformability according to EN 12004:
Conformity of Ultralite S1 Quick is S1 - deformable.
declared in ITT certificates Contiene più del 20% di materiale riciclato Storage: 12 months.
n° 25120143/AG (TUM) issued by Consumption: 1.5-2.5 kg/m².
the Technische Universität München Packaging: 15 kg bags.
laboratory (Germany).
Ultralite S2
TH EUROPEA
E WI N
NC EN 12004 S
TECHNICAL DATA:
TA
PLI
C2E S2
NDA
IN COM
RDS
One-component, high-performance, Pot life of mix: more than 8 hours.
ILES
CEME
IC T
Open time: > 30 minutes.
NT
highly-deformable, lightweight
OU
AM
ITI
SA ER
DHESIVE FOR C
TECHNICAL DATA:
A
TA
PLI
NDA
C2FE S2
IN COM
RDS
ILES
IC T
OU
AM
SA ER
DHESIVE FOR C
Grouting of joints:
setting and hydrating cementitious – on walls: after 2-3 hours.
adhesive with extended open time, – on floors: after 2-3 hours.
good trowelability, high wetting capacity Set to light foot traffic: 2-3 hours.
EN 12004
and extremely high yield, for ceramic Ready for use: 24 hours.
tiles and stone, ideal for installing thin Colours: grey and white.
Application: N° 4, 5, 6 or 10 notched trowel.
porcelain tiles. Deformability according to EN 12004: S2 - highly
deformable.
Conformity of Ultralite S2 Quick is Storage: 12 months.
declared in APPLUS+ certificates
Contiene più del 20% di materiale riciclato
TECHNICAL DATA:
A
TA
PLI
NDA
IN COM
RDS
N RA
IO
AD
HESIVE FOR CE
41
4. ADHESIVES FOR CERAMIC TILES AND STONE MATERIAL
Adesilex P25 E WI
TH EUROPEA
NC EN 12004 S
N
TECHNICAL DATA:
TA
PLI
NDA
IN COM
RDS
Ready-to-use adhesive paste with no Where to use: walls only.
ILES
DISPE
Open time: ≥ 30 minutes.
CT
RS
vertical slip and long open time for
MI
N RA
IO
AD
HESIVE FOR CE
TECHNICAL DATA:
TA
PLI
D2T
NDA
IN COM
RDS
Ready to use, high-performance Open time: 20 minutes.
ILES
DISPE
Adjustment time: 30-35 minutes.
CT
RS
adhesive paste with BioBlock®
MI
N RA
IO
AD
HESIVE FOR CE
Ultramastic 2 E WI
TH EUROPEA
NC EN 12004 S
N
TECHNICAL DATA:
A
TA
PLI
D2T
NDA
IN COM
RDS
N RA
IO
AD
HESIVE FOR CE
Ultramastic III CE
WITH EUROPEAN
AN EN 12004 S
TECHNICAL DATA:
TA
PLI
NDA
IN COM
RDS
N RA
IO
AD
HESIVE FOR CE
42
Ultramastic 5 CE
WITH EUROPEAN
AN EN 12004 S
TECHNICAL DATA:
TA
PLI
NDA
IN COM
RDS
Ready-to-use, high-performance Open time: ≥ 30 minutes.
ILES
DISPE
Adjustment time: up to 50 minutes according to
CT
RS
adhesive paste with no vertical slip
MI
N RA
IO
AD
HESIVE FOR CE
TECHNICAL DATA:
TA
PLI
NDA
IN COM
RDS
Two-component, high-performance Open time: 50 minutes.
REACT
ILES
Waiting time before grouting: 12 hours.
IC T
ION
polyurethane adhesive for ceramic tiles
RE
AM
SIN ER
ADHESIVE FOR C
Keralastic T E WI
TH EUROPEA
NC EN 12004 S
N
TECHNICAL DATA:
A
TA
PLI
NDA
IN COM
Two-component, high-performance
REACT
ILES
RE
AM
SIN ER
ADHESIVE FOR C
Kerapoxy Adhesive E WI
TH EUROPEA
NC EN 12004 S
N
TECHNICAL DATA:
A
TA
PLI
NDA
IN COM
RDS
ILES
SIN ER
ADHESIVE FOR C
43
GROUTS FOR CERAMIC TILES
5. GROUTS FOR CERAMIC TILES
46
Ultracolor Plus TECHNICAL DATA:
High-performance, anti-efflorescence, Pot life of mix: 20-25 minutes.
Waiting time before finishing: 15-30 minutes.
quick-setting and drying polymer- Set to light foot traffic: approx. 3 hours.
modified mortar with water-repellent Ready for use: 24 hours (48 hours for basins and
DropEffect® and anti-mould BioBlock® swimming pools).
technology for grouting joints 2 to Colours: 26 different colours from the MAPEI
20 mm wide. “Coloured Grouts” range.
Application: rubber trowel.
Finishing: MAPEI sponge or Scotch-Brite® pad.
EMICODE: EC1 Plus - very low emission.
Storage:
– 12 months (23 kg bags);
– 24 months (1 and 5 kg bags).
Consumption: according to the size of the joints.
Packaging: 23 kg bags and 4x5 kg and 9x1 kg boxes,
according to the colour.
TECHNICAL DATA:
TA
PLI
NDA
IN COM
RDS
Two-component, high-performance, Pot life of mix: 45 minutes.
REACT
ILES
Open time: 30 minutes.
IC T
ION
anti-acid epoxy mortar and adhesive
RE
AM
SIN ER
ADHESIVE FOR C
TA
PLI
NDA
IN COM
grouting ceramic tiles and stone material
RDS
exposed to chemicals.
(minimum width of joints 3 mm). Colours: 26 different colours from the MAPEI
UT
RE
CT
O
GR
A
ION
RESIN
Kerapoxy CQ
TH EUROPEA
E WI NS
NC
EN
13888
TECHNICAL DATA:
A
TA
PLI
NDA
IN COM
RDS
GR
A
ION
RESIN
Kerapoxy Design
TH EUROPEA
E WI NS
NC
EN
13888
TECHNICAL DATA:
A
TA
PLI
NDA
IN COM
RDS
GR
A
ION
RESIN
TA
PLI
NDA
RDS
ILES
RE
AM
SIN ER
ADHESIVE FOR C
attractive and high quality finish. Colours: 15: 700 translucent (neutral), 702 silver grey,
May also be used for bonding. 710 ice white, 716 pink, 720 pearl grey, 728 dark grey,
729 sahara, 730 turquoise, 731 dark brown, 740 blue,
EN 12004 744 mandarin, 750 red, 760 gold, 770 anthracite and
799 white.
Application: suitable trowel.
Finishing: MAPEI cellulose sponge.
EMICODE: EC1 R Plus - very low emission.
Storage: 24 months.
Consumption: according to the size of the joints.
Packaging: 3 kg units.
47
5. GROUTS FOR CERAMIC TILES
Kerapoxy IEG
TH EUROPEA
E WI NS
NC
EN
13888
TECHNICAL DATA:
TA
PLI
NDA
IN COM
RDS
Two-component epoxy mortar with Pot life of mix: 45 minutes.
Set to light foot traffic: approx. 24 hours.
UT
RE
extremely high chemical resistance for
CT
O
GR
A
ION
RESIN
Kerapoxy P
TH EUROPEA
E WI NS
NC
TECHNICAL DATA:
13888
EN
TA
PLI
NDA
IN COM
RDS
Easy-to-apply, two-component, Pot life of mix: 45 minutes.
Set to light foot traffic: approx. 24 hours.
UT
RE
anti-acid epoxy mortar with good
CT
O
GR
A
ION
RESIN
48
49
SYSTEMS FOR LAYING
AND GROUTING PORPHYRY
AND INTERLOCKING STONE
6. SYSTEMS FOR LAYING AND GROUTING PORPHYRY AND INTERLOCKING STONE
52
53
ELASTIC SEALANTS AND ADHESIVES
7. ELASTIC SEALANTS AND ADHESIVES
56
7.2 Polyurethane sealants and adhesives____________________________________________________________
Mapeflex PB25 TECHNICAL DATA:
Two-component, thixotropic, modified- Movement in service: 25%.
Modulus of elasticity at 100% elongation:
polyurethane sealant resistant to 0.35 N/mm².
hydrocarbons with a low modulus of Shore A hardness: 20.
elasticity, for movements up to 25%. Workability time: 30 minutes.
Set to light foot traffic: 24 hours.
ISO 11600 F 25 LM Colour: black.
Application: trowel, extrusion gun.
Consumption: 0.14 kg/m (10x10 mm section).
Packaging: 10 kg drums (A+B).
57
7. ELASTIC SEALANTS AND ADHESIVES
58
Mapeflex PU65 TECHNICAL DATA:
Two-component, castable Shore A hardness: 80.
Workability time: 2-3 hours.
polyurethane sealant for sealing joints Colour: black.
in roads up to surface level, mixed with Application: by pouring.
QUARTZ 0.5 sand at a ratio of up to 1:1 Consumption: 1.2 kg/litre (10x10 mm section).
in weight. Setting and hardening may be Packaging: 10 kg drums (A+B).
accelerated by adding a specific liquid
accelerator.
59
7. ELASTIC SEALANTS AND ADHESIVES
60
Mapeflex Blackfill TECHNICAL DATA:
Bituminen sealant. Movement in service: plastic product.
Dry solids content: 90%.
Elongation at failure: 65%.
Colours: black.
Application: extrusion gun, trowel.
Consumption: 3.0 meters per 300 ml cartridge
(10x10 mm section).
Packaging: 300 ml cartridge.
61
7. ELASTIC SEALANTS AND ADHESIVES
62
Primer M TECHNICAL DATA:
One-component solvent-free primer Application of sealant: after 40 minutes.
Colour: brown.
for polyurethane adhesives for Consumption: 1.5-2 g/m (1 cm - deep joint).
non-absorbent surfaces. Packaging: 250 g bottles.
63
ADHESIVES AND FINISHING
PRODUCTS FOR PARQUET
8. ADHESIVES AND FINISHING PRODUCTS FOR PARQUET
66
Ultrabond Eco 575 TECHNICAL DATA:
Adhesive in water dispersion with Consistency: creamy paste.
Colour: beige.
strong, rapid initial hold, with very low Open time: approximately 25 minutes.
emission of volatile organic compounds Final hardening time: 24 hours.
(VOC) for vinyl floorings. EMICODE: EC1 Plus - very low emission.
Storage: 24 months.
Application: extrusion pistol.
Consumption: 325 ml every 12 metres.
Packaging: 310 ml cartridges and 5 kg drums.
67
8. ADHESIVES AND FINISHING PRODUCTS FOR PARQUET
68
Ultrabond S965 1K TECHNICAL DATA:
One-component, isocyanate and Consistency: creamy paste.
Colour: beige.
solvent-free, sililated polymer adhesive Open time: 110 minutes.
with very low emission level of volatile Set to light foot traffic: after 12 hours.
organic compounds, for all types of Sanding: after 3 days.
parquet. EMICODE: EC1 R Plus - very low emission.
Storage: 12 months.
Application: N° 2 or 4 notched trowel for wood.
Consumption: 800-1200 g/m².
Packaging: 15 kg aluminium bags contained in plastic
drums.
8.2 Paints, stuccos, oils, base coats and coloured sealants for parquet____________________________________
Silwood TECHNICAL DATA:
Acrylic sealant in water dispersion for Consistency: creamy paste.
Colour: white, oak, iroko, doussie, wengè, teak,
wooden floors. walnut, cherry, beech, maple and birch.
Open time: 10-20 minutes.
Sanding: after 24 hours. After sanding, the product
may be varnished.
EMICODE: EC1 - very low emission.
Storage: 12 months.
Application: extrusion pistol loaded with cartridge
of product.
Consumption: according to the size of the joint to
be filled, calculating that its density is equal to
1.75 g/cm³.
Packaging: 310 ml cartridges.
69
8. ADHESIVES AND FINISHING PRODUCTS FOR PARQUET
70
Ultracoat High Traffic TECHNICAL DATA:
comp. A comp. B
Two-component, NMP-free, 100% Consistency: liquid liquid.
polyurethane water-based varnish with Colour: transparent off-white.
Density of Ultracoat High
high resistance to wear and abrasion Traffic 10 gloss (g/cm³): 1.040 1.060.
and very low emission of volatile Density of Ultracoat High
Traffic 30 gloss (g/cm³): 1.030 1.120.
organic compounds for wooden floors. Density of Ultracoat High
Suitable for floors subject to extremely Traffic 60 gloss (g/cm³): 1.040 1.080.
high pedestrian use. UL
TRACOA Storage: 12 months.
Dusty dry: 25 mins.
T
FIR E R E SIST
SYSTE M
Touch dry: 40 mins.
Maximum permitted dilution ratio (Dir. 2004/42/EEC): 10%
ON
AN I
T P R OT E CT
with clean water.
Sanding: after 12 hours.
Varnishing (without sanding): after 2 hours, within 5 hours.
Ready for service: 36-48 hours.
Gloss factor: (10-30-60 gloss).
Consumption: first coat 80-100 ml/m²; successive coats
50-70 ml/m².
Packaging: 11 l kits (A+B) 2x5.5 l.
SYSTE M
AN I
T P R OT E CT
and high insulating capacity, for Duration of mix: 2 hours.
preparing solid and pre-sanded wooden Mixing ratio: comp. A: comp. B = 5 : 1 (in volume).
floors and wooden floors under repair Maximum permitted dilution ratio (Dir. 2004/42/
for water-based finishing cycles. EEC): 10% with clean water or with ULTRACOAT EL.
Sanding: after 12 hours.
Varnishing (without sanding): after 2 hours, within
5 hours.
Consumption: 80-100 g/m² per coat.
Packaging: 6 litre kits (A+B), 2x6 l boxes.
71
8. ADHESIVES AND FINISHING PRODUCTS FOR PARQUET
72
73
ADHESIVES FOR RESILIENT
AND TEXTILE COVERINGS
9. ADHESIVES FOR RESILIENT AND TEXTILE COVERINGS
76
Aquacol T TECHNICAL DATA:
Solvent-free, ultra quick-setting Consistency: creamy paste.
Colour: light beige.
synthetic polymer adhesive in water Waiting time: from 0 to 10 minutes.
dispersion with very low emission level Open time: 20-30 minutes.
of volatile organic compounds (VOC) for Set to light foot traffic: after approximately 2-3 hours.
bonding textile flooring and linoleum. Ready for use: at least 24 hours.
EMICODE: EC1 - very low emission.
Storage: 12 months. Protect from frost.
Application: N° 1, 2 or 3 notched trowel.
Consumption: 0.30-0.55 kg/m².
Packaging: 5, 12 and 25 kg drums.
77
9. ADHESIVES FOR RESILIENT AND TEXTILE COVERINGS
78
Ultrabond Eco 170 TECHNICAL DATA:
Adhesive in water dispersion with a Consistency: creamy paste.
Colour: light beige.
quick, strong initial bond and very Waiting time: from 0 to 20 minutes.
low emission level of volatile organic Open time: 30-40 minutes.
compounds (VOC), specially formulated Set to light foot traffic: approximately 3 hours.
for textile flooring. Ready for use: 24 hours.
EMICODE: EC1 Plus - very low emission.
Storage: 12 months. Protect from frost.
Application: N° 1 or 2 notched trowel.
Consumption: 0.25-0.40 kg/m².
Packaging: 16 kg drums.
79
9. ADHESIVES FOR RESILIENT AND TEXTILE COVERINGS
80
Ultrabond Eco Fix TECHNICAL DATA:
Adhesive in water dispersion which Consistency: creamy paste.
Colour: light beige.
remains permanently tacky with very Waiting time: 30 minutes - 12 hours.
low emission level of volatile organic Set to light foot traffic: immediately after laying.
compounds (VOC), for self-laying Ready for use: immediately after laying.
flooring tiles. EMICODE: EC1 - very low emission.
Storage: 12 months. Protect from frost.
Application: N° 1 trowel or by roller.
Consumption: 0.10-0.20 kg/m².
Packaging: 10 kg drums.
NEW
Ready for service: immediately after installation.
Storage: 12 months. Protect from frost.
Application: roller.
Consumption: 0.1-0.2 kg/m².
Packaging: 16 kg drum.
81
9. ADHESIVES FOR RESILIENT AND TEXTILE COVERINGS
82
9.2 Resin adhesives in alcohol_____________________________________________________________________
Adesilex F57 TECHNICAL DATA:
Synthetic resin adhesive in alcohol for Consistency: creamy paste.
Colour: beige.
bonding textile and linoleum flooring Waiting time: from 0 to 10 minutes.
and coverings. Open time: 20 minutes.
Ready for use: approx. 24 hours.
Storage: 12 months.
Application: N° 3 notched trowel.
Consumption: 0.3-0.55 kg/m² (0.6 kg/m² for
wheelchairs).
Packaging: 19 kg drums.
83
9. ADHESIVES FOR RESILIENT AND TEXTILE COVERINGS
NEW
Open time: 50-60 minutes.
Setting time: approximately 4 hours.
Set to light foot traffic: after 12-24 hours.
Ready for use: after 3 days.
EMICODE: EC1 R Plus - very low emission.
Storage: 12 months.
Application: N° 1 or 3 notched trowel.
Consumption: 0.3-0.6 kg/m².
Packaging: 10 kg drums.
84
Ultrabond Turf PU 2K TECHNICAL DATA:
Two-component polyurethane adhesive Consistency: comp. A: thick paste;
comp. B: fluid liquid.
for bonding jointing strips between Colour: green and red.
sheets of synthetic grass with very Mixing ratio: comp. A : comp. B = 90 : 10.
low emission level of volatile organic Pot life of mix: 60 minutes.
compounds (VOC). Application temperature range: from 0°C to +35°C.
Open time: 70-80 minutes.
EMICODE: EC1 R Plus - very low emission.
Set to light foot traffic: 12-24 hours.
Storage: 12 months.
Application: N° 3 or 4 notched trowel.
Consumption: 0.4-0.5 kg per metre of 40 mm wide
jointing strip (10 kg of adhesive for 20-25 metres of
jointing strip).
Packaging: 10 kg drums.
85
9. ADHESIVES FOR RESILIENT AND TEXTILE COVERINGS
TECHNICAL DATA:
TA
PLI
C2F S1
NDA
IN COM
RDS
Consistency: comp. A: powder; comp. B: thick liquid.
Two-component, high-performance,
ILES
CEME
Mixing ratio: comp. A: 25 kg + comp. B: 5.5 kg.
IC T
NT
deformable, rapid-setting and hydrating
OU
AM
ITI
SA ER
DHESIVE FOR C
Pot life of mix: 45 minutes.
cementitious adhesive for removable Application temperature range: from +5°C to +30°C.
Open time: 20 minutes.
rubber tiles. Setting time: 2 hours.
Set to light foot traffic: 3-4 hours.
Ready for use: 24 hours.
EN 12004 Colours available: grey and white.
EMICODE: EC1 R Plus - very low emission.
Storage: 12 months.
Application: N° 4, 5, 6 or 10 notched trowel.
Consumption: 3-8 kg/m².
Packaging: GRANIRAPID white: 28 kg kit
component A: 22.5 kg bag
component B: 5.5 kg drum
GRANIRAPID grey: 30.5 kg kit
component A: 25 kg bag
component B: 5.5 kg drum.
86
87
COMPLEMENTARY PRODUCTS FOR
LAYING CERAMIC TILES, STONE
MATERIAL, PARQUET, RESILIENT
AND TEXTILE COVERINGS
10. COMPLEMENTARY PRODUCTS FOR LAYING CERAMIC TILES, STONE MATERIAL, PARQUET, RESILIENT AND TEXTILE COVERINGS
10.1 Complementary products for laying ceramic tiles and stone material__________________________________
Fuga Fresca TECHNICAL DATA:
Acrylic resin paint in water dispersion to Colour: available in 26 different colours.
Application: by brush or bottle.
bring back the colour of tile joints Consumption: according to the size of the joint.
in ceramic tiles. Packaging: 1 kg tins and 160 g bottles.
90
Mapetex System TECHNICAL DATA:
System for laying removable ceramic – MAPETEX:
width: 100 cm and 200 cm.
tiles and stone material. Also used for – MAPETEX STRIP:
isolating and anti-fracture layers. width: 50 mm and 410 mm.
Application: see Technical Data Sheet.
Packaging:
MAPETEX:
2 m x 50 m rolls;
1 m x 50 m rolls.
MAPETEX STRIP:
50 mm x 25 m rolls;
410 mm by 10 m rolls;
410 mm x 5 m rolls.
91
10. COMPLEMENTARY PRODUCTS FOR LAYING CERAMIC TILES, STONE MATERIAL, PARQUET, RESILIENT AND TEXTILE COVERINGS
10.3 Accessories, abrasive disks and products for the maintenance of parquet_____________________________
Cleaner H TECHNICAL DATA:
Damp wipes for cleaning hands. Packaging: plastic bottles with 80 damp wipes
(20x30 cm).
92
Ultrabond P-R9 TECHNICAL DATA:
One-component, moisture curing, Consistency: liquid.
Colour: brown.
expansive polyurethane adhesive used Inflammable: no.
by injection, for fastening and repairing Application temperature range: from +10°C
parquet elements which are not to +35°C.
perfectly bonded to the substrate. Sanding: 24 hours.
Set to light foot traffic: 24 hours.
Storage: 6 months.
Application: by extrusion from the nozzle on the
canister.
Consumption: 1-2 ml for each hole to be injected.
Packaging: 0.5 kg canisters.
Ultracoat Pad
Pads used for polishing and cleaning
parquet floors.
Packaging: boxes of 6 pads.
93
10. COMPLEMENTARY PRODUCTS FOR LAYING CERAMIC TILES, STONE MATERIAL, PARQUET, RESILIENT AND TEXTILE COVERINGS
94
Ultracoat Roller Plus
Long-haired roller (6 mm) recommended
for applying undercoats of ULTRACOAT
PREMIUM BASE. Thanks to its special
composition and length of the fibres,
the roller helps to impregnate floors
perfectly.
ULTRACOAT ROLLER PLUS may
also be used to spread the first
coats of ULTRACOAT EASY PLUS and
ULTRACOAT HIGH TRAFFIC directly
(without undercoat).
Ultracoat SR
Abrasive mesh disks in silica carbide
for sanding parquet floors.
95
10. COMPLEMENTARY PRODUCTS FOR LAYING CERAMIC TILES, STONE MATERIAL, PARQUET, RESILIENT AND TEXTILE COVERINGS
96
97
PRODUCTS FOR RESIN
AND CEMENTITIOUS FLOORS
11. PRODUCTS FOR RESIN AND CEMENTITIOUS FLOORS
100
Mapecoat I 620 W TECHNICAL DATA:
Two-component, shiny epoxy finish Mixing ratio: comp. A: comp. B = 50:100.
Colour of mix: opaline.
in water dispersion for anti-dust and Consistency of mix: fluid.
anti-grease treatments on concrete Application temperature range: from +12°C
floors, cementitious substrates and as a to +30°C.
finishing coat on epoxy systems. Workability time: 40 minutes.
Dusty dry: 3 hours.
Setting time: 8-9 hours.
Set to light foot traffic: 24 hours.
Final hardening time: 7 days.
Storage: 12 months in its original sealed packaging.
Application: short-haired or medium-haired roller or
airless spray system.
Consumption: 0.100-0.250 kg/m² per coat according
to the absorption of the substrate.
Packaging: 15 kg kits (A + B).
101
11. PRODUCTS FOR RESIN AND CEMENTITIOUS FLOORS
PRINCIPLES
102
Mapefloor CPU/MF TECHNICAL DATA:
Three-component, self-levelling Mixing ratio: A/B/C = 4.2/4.2/20.
EN 13813 Colour of mix: grey, beige, ochre, red and green.
polyurethane-cement mortar with high Consistency of mix: thick fluid.
resistance to chemicals for industrial Pot life of mix at +20°C: 15 minutes.
floors, applied in thicknesses 3 to 4 mm. Dust dry at +23°C and 50% R.H.: 2-4 hours.
Set to light foot traffic at +23°C and 50% R.H.:
EN 1504-2
24 hours.
Final hardening time: 4 days.
Compressive strength: 60 N/mm².
IN COMPLIANCE WITH
EUROPEAN STANDARD
PRINCIPLES
Mapefloor EP19 SR
SYNTHETIC
RESINS
TECHNICAL DATA:
Three-component acid and wear-
B2.0
AR0.5-IR20-Bfl-s1 Mixing ratio: A/B/C = 7.5/2.5/90.
Consistency of mix: damp sand.
resistant epoxy mortar for floors. Application temperature range: from +5°C to +30°C.
Workability time: from 30 to 40 minutes.
Set to light foot traffic: 6 hours.
Ready for use: 12 hours.
EN 13813
Resistance to temperatures: from -20°C to +120°C.
Resistance to ageing: excellent.
Resistance to oils: excellent.
Resistance to acids and alkalis: excellent.
Compressive strength after 7 days: (EN 196/1):
50 N/mm².
Flexural strength after 7 days: (EN 196/1): 20 N/mm².
Taber abrasion resistance after 7 days (H22 disk -
1000 g - 1000 revs): 1.1 g.
Storage: 24 months in its original sealed packaging.
Application: trowel and smooth metal trowel.
Consumption: 20 kg/m² per cm of thickness;
Packaging: 10 kg kits.
MC-IR Set to light foot traffic (at +23°C and 50% R.H.): 24
SURFACE PROTECTION
SYSTEMS FOR CONCRETE
hours.
Final hardening time: 7 days.
Taber Test (after 7 days at +23°C and 50% R.H.,
CS17 disk, 1000 cycles, 1000 g): 20 mg.
Storage: 12 months in its original sealed packaging.
Application: short-haired roller, such as mohair.
Consumption: 0.1-0.2 kg/m² per coat according to
absorption.
Packaging: 5 kg kits (A + B).
103
11. PRODUCTS FOR RESIN AND CEMENTITIOUS FLOORS
104
Mapefloor Finish NEW TECHNICAL DATA:
Mixing ratio: comp. A : comp. B = 5.1 : 4.
55 Fast Colour of mix: Ral 7032 - Ral 1015 - Ral 7046 - Ral 7000 - Ral 7001.
Consistency of mix: fluid paste.
Two-component, rapid-drying, Density of mix (kg/m³): 1,250.
Viscosity of mix (mPa·s): 1,200 ± 200.
high-flexibility, wear and UV-resistant Pot life at +23°C: 1 hour.
aliphatic polyurethane finishing product Dust dry at +23°C: 4-5 hours.
Application temperature range: from +5°C to +30°C.
for protecting elastic polyurethane Set to foot traffic at +23°C: 12 hours.
Final hardening time at +23°C: 1 day.
membranes.
NEW
Maximum deformation after 7 days at +23°C + 14 days
at +50°C (%): 120.
Tear strength after 7 days at +23°C + 14 days at +50°C
(N/mm): 21.5.
Taber abrasion resistance (CS10 disk - 1000 g - 1000 revs)
after 7 days at +23°C (mg): 35 ± 5.
Storage: 6 months in its original, sealed packaging at a temperature
of between +15°C and +25°C
Application: roller or airless spray system.
Theoretical consumption: 0.15-0.35 kg/m².
Packaging: 9.1 kg kit (A + B):
– comp. A: 5.1 kg drum;
– comp. B: 4 kg drum.
Mapefloor I 300 SL SR
SYNTHETIC
RESINS
TECHNICAL DATA:
Two-component, multi-purpose,
B2.0
AR0.5-IR20-Bfl-s1 Mixing ratio: comp. A : comp. B = 3 : 1.
Colour of mix: neutral.
neutral-coloured epoxy formulate for Consistency of mix: thick fluid.
industrial floor coatings up to 4 mm Dust dry at +23°C and 50% R.H.: 2-4 hours.
thick. Set to light foot traffic at +23°C and 50% R.H.: 24 hours.
May be coloured with Final hardening time: 7 days.
EN 13813 Taber Test after 7 days (EN ISO 5470-1) CS17 disk,
MAPECOLOR PASTE. 1000 cycles, 1000 g at +23°C - 50% R.H.: 70 mg.
Storage: 24 months in its original sealed packaging.
Application: by roller or flat or notched trowel.
Consumption:
– 2.0 kg/m² for 2 mm thick self-levelling coatings on
substrates primed with PRIMER SN;
– 0.9 kg/m² for intermediate layers in 3 mm thick non-slip
coatings on substrates primed with PRIMER SN;
– 0.6 kg/m² for finishing layers in 1 mm and 3 mm thick
non-slip coatings on substrates primed with PRIMER SN.
Packaging: 8 and 20 kg kits (A + B).
105
11. PRODUCTS FOR RESIN AND CEMENTITIOUS FLOORS
Mapefloor I 320 SL SR
SYNTHETIC
RESINS
TECHNICAL DATA:
CONCEPT Mixing ratio: comp. A : comp. B = 100 : 22.
B2.0
AR0.5-IR20-Cfl-s1
Mapefloor I 350 SL SR
SYNTHETIC
RESINS
TECHNICAL DATA:
B2.0 Mixing ratio: comp. A : comp. B = 75 : 25.
Two-component, multi-purpose, AR0.5-IR20-Bfl-s1
Colour of mix: neutral.
neutral-coloured epoxy formulate, with Consistency of mix: thick fluid.
“class 1” and Euro-class “Bfl - s1” fire Pot life of mix at +20°C: 35 minutes.
Dust dry at +23°C and 50% R.H.: 2-4 hours.
resistance for industrial floor coatings Set to light foot traffic at +23°C and 50% R.H.: 24 hours.
up to 4 mm thick. Final hardening time: 7 days.
May be coloured with EN 13813 Taber Test after 7 days, CS17 disk, 1000 cycles, 1000 g,
at +23°C - 50% R.H.: 70 mg.
MAPECOLOR PASTE. Storage: 12 months in its original sealed packaging.
Application: by roller or flat or notched trowel.
Consumption:
– for 2 mm thick self-levelling coatings on substrates primed
with PRIMER SN: 2.0 kg/m²;
– for intermediate layers in 3 mm thick, multi-layer, non-slip
coatings on substrates primed with PRIMER SN: 0.9 kg/m²;
– for finishing layers in 1 mm and 3 mm thick multi-layer,
non-slip coatings on substrates primed with
PRIMER SN: 0.6 kg/m².
Packaging: 8 kg kits (A + B).
NEW
humidity) and the equipment used to take the readings.
Compressive strength after 28 days at +23°C (EN 196-1) (N/mm²):
approx. 80 (MAPEFLOOR I 360 AS (without fillers).
Flexural strength after 28 days at +23°C (EN 196-1) (N/mm²): approx. 40
(MAPEFLOOR I 360 AS (without fillers).
Abrasion resistance - Taber abrasion meter (CS17 disk - 1,000 revs. - 1,000 g)
after 7 days at 23°C (DIN 53109) (mg): 70.
Shore D hardness after 3 days at +23°C (DIN 53505): 77.
Adhesion to concrete (ISO 4624) (N/mm²): ≥ 1.5 (failure of concrete).
Storage: 24 months in its original packaging in a dry place at a temperature of
between +5°C and +30°C.
Consumption: max. 2.5 kg/m2 (MAPEFLOOR I 360 AS mixed with QUARTZ 0.25
at the dosage rates indicated).
Packaging: 20 kg kit (A + B):
– component A: 16 kg metal can;
– component B: 4 kg metal can.
NEW
these values may vary according to surrounding conditions (temperature and
humidity) and the equipment used to take the readings.
Compressive strength after 28 days at +23°C (EN 196-1) (N/mm²): approx. 80
(MAPEFLOOR I 390 EDF without fillers).
Flexural strength after 28 days at +23°C (EN 196-1) (N/mm²): approx. 40
(MAPEFLOOR I 390 EDF without fillers).
Abrasion resistance - Taber abrasion meter (CS17 disk - 1,000 revs. -
1,000 g) after 7 days at +23°C (DIN 53109) (mg): 70.
Shore D hardness after 3 days at +23°C (DIN 53505): 77.
Adhesion to concrete (ISO 4624) (N/mm²): ≥ 1.5 (failure of concrete).
Storage: 24 months in its original packaging in a dry place at a temperature of
between +5°C and +30°C.
Consumption: max. 2.5 kg/m2 (MAPEFLOOR I 360 EDF mixed with
QUARTZ 0.25 at the dosage rates indicated).
Packaging: 20 kg kit (A + B).
component A: 16 kg metal can; component B: 4 kg metal can.
106
Mapefloor I 500 W SR
SYNTHETIC
RESINS
B2.0
TECHNICAL DATA:
Mixing ratio: comp. A : comp. B = 1 : 12.
Two-component, vapour-permeable, AR0.5-IR20-Bfl-s1 Colour of mix: neutral.
Consistency of mix: thick fluid.
neutral-coloured epoxy formulate in Pot life of mix at +20°C: 20 minutes.
water dispersion for industrial floors. Dust dry at +23°C and 50% R.H.: 3-4 hours.
Set to light foot traffic at +23°C and 50% R.H.: 16 hours.
May be coloured with Final hardening time: 7 days.
Taber Test after 7 days (EN ISO 5470-1) CS17 disk,
MAPECOLOR PASTE. 1000 cycles, 1000 g at +23°C - 50% R.H.: 110 mg.
EN 13813 Storage: 12 months in its original sealed packaging.
Application: notched or smooth trowel or notched rake.
Consumption:
– for 2 mm thick smooth self-levelling coatings on substrates primed
with MAPECOAT I 600 W: 4 kg/m²;
– for 5 mm thick, multi-layered non-slip systems:
as first layer:
MAPEFLOOR I 500 W 2-2.5 kg/m²;
QUARTZ 0.5 5 kg/m²;
as second layer:
MAPEFLOOR I 500 W 2-2.5 kg/m²;
QUARTZ 0.5 5 kg/m²;
as finishing layer:
MAPEFLOOR I 500 W 0.5-0.7 kg/m²
Packaging: 26 kg kits (A + B).
107
11. PRODUCTS FOR RESIN AND CEMENTITIOUS FLOORS
108
Primer SN Rasante NEW TECHNICAL DATA:
Two-component, solvent-free epoxy Consistency of mix: paste.
Colour: straw yellow.
skimming product. Density of mix (kg/m³): 1,550.
Viscosity of mix (mPa·s): 50,000 (# 6 - 20 rpm).
Packaging: 25 kg kit (A + B):
– component A: 20 kg;
– component B: 5 kg.
NEW
NEW
Electrical resistance: 103<RE<104 Ohm (typical resistance at
earthing points).
N.B.: these values may vary according to surrounding
conditions (temperature and humidity) and the equipment used
to take the readings.
Set to foot traffic: approx. 26 h at +10°C; approx 13 h at
+20°C; approx 8 h at +30°C.
Storage: 12 months in its original packaging at a temperature
of between +5°C and +30°C.
Consumption: 80-100 g/m².
Packaging: 8 kg kit:
– component A: 2 kg;
– component B: 6 kg.
NEW
Compressive strength (EN 13892-2) (N/mm²):
IN COMPLIANCE WITH
after 24 hours after 7 days after 28 days
25 55 68
EUROPEAN STANDARD
PRINCIPLES
Flexural strength (EN 13892-2) (N/mm²):
MC-PR-IR after 24 hours after 7 days after 28 days
SURFACE PROTECTION
SYSTEMS FOR CONCRETE
7 10 12
Adhesion to concrete after 28 days (EN 13892-8) (N/mm²): > 3.
Böhme wear resistance after 28 days (cm3 / 50 cm²): 7.5.
Consumption: approx. 2.25 kg/m² per mm of thickness.
Packaging: 25 kg kit (A+B+C):
– component A: 1 kg canister;
– component B: 3 kg canister;
– component C: 21 kg bag.
109
11. PRODUCTS FOR RESIN AND CEMENTITIOUS FLOORS
C70-F7
TECHNICAL DATA:
Colour of mix: light grey, anthracite, light green, brown and red.
Pre-blended, ready-to-use industrial A6-A1fl
Density of mix (kg/m³): 2,200.
hardener for concrete floors made from pH of mix: >12.5.
Application temperature range: from +5°C to +35°C.
special quartz in a granulometric curve, Compressive strength EN 13892/2 (N/mm²): 40 (after 1 day);
Portland cement and special additives. 70 (after 28 days).
Flexural strength EN 13892/2 (N/mm²): 7 (after 1 day) 9
(after 28 days).
Bond strength on concrete (substrate in MC 0.40 -
EN 13813 water/cement ratio = 0.40) according to EN 1766 (N/mm²):
≥ 2 (after 28 days).
Impermeability to water - penetration depth -
EN 12390/8 (mm): < 5.
Coefficient of capillary absorption EN 1062/3 (kg/m²·h0.5): < 0.1.
Böhme abrasion resistance EN 13892/3: Class 6.
Reaction to fire EN 13501: Euroclass A1.
Storage: 12 months in its original sealed packaging.
Application: by dusting.
Consumption:
– manual application: from 1.5 to 2.5 kg/m² per coat;
– mechanical application: from 3 to 5 kg/m².
Packaging: 25 kg bags.
Ultratop CEMENTITIOUS
SCREED
TECHNICAL DATA:
C40-F10
Colour: white, beige, light grey, red, anthracite and
Self-levelling, ultra-quick hardening A9-A2 fl-s1
standard.
mortar with special hydraulic binders, Mixing ratio: 12-22 parts of water per 100 parts in weight
applied at a thickness between of ULTRATOP.
5 and 40 mm to create abrasion- Applicable thickness: from 5 to 40 mm.
Self-levelling: yes.
resistant floors. Workability time: 15 minutes.
Setting time: 60 minutes.
EN 13813
Set to light foot traffic: 3-4 hours.
Compressive strength after 28 days at +23°C:
≥ 40 N/mm².
Flexural strength after 28 days at +23°C: ≥ 11 N/mm².
Böhme abrasion resistance after 28 days at +23°C:
9 cm³/50 cm².
Storage: 12 months in its original sealed packaging.
EMICODE: EC1 R - very low emission.
Application: by hand or mortar pump.
Consumption: 16.5-17.5 kg/m² per cm of thickness.
Packaging: 25 kg bags.
110
11.3 Complementary products for resin and cementitious floors__________________________________________
Additix PE TECHNICAL DATA:
Admixture to make epoxy and Appearance: powder.
Colour: white.
polyurethane products thicker with a Density: 960 kg/m².
thixotropic consistency. Consumption: 2-5% by weight on the weight of the
resin.
Packaging: 1 kg drums.
NEW
111
11. PRODUCTS FOR RESIN AND CEMENTITIOUS FLOORS
NEW
112
Mapefloor Filler TECHNICAL DATA:
Calibrated fillers added to MAPEFLOOR Consumption: 5-10 g/m².
Packaging: 0.3 kg plastic buckets.
FINISH 50, MAPEFLOOR FINISH 52 W,
MAPEFLOOR FINISH 53 W/L,
MAPEFLOOR FINISH 54 W/S and
MAPECOAT I 620 W to form a non-slip
finish.
113
11. PRODUCTS FOR RESIN AND CEMENTITIOUS FLOORS
NEW
Packaging: 5 litre drum.
114
Quartz 1.2 TECHNICAL DATA:
Quartz sand used as a “filler” and/or for Colour: light grey.
Maximum size of inerts: 1.2 mm.
“sprinkling” on epoxy systems.
115
PRODUCTS FOR REPAIRING ASPHALT
AND HIGHWAY MAINTENANCE
12. PRODUCTS FOR REPAIRING ASPHALT AND HIGHWAY MAINTENANCE
rs
d e r + Fi b e
thickness.
Packaging: 25 kg vacuum-packed polyethylene bags.
EN 1504-3
Minimum applicable thickness: 1 cm.
temperatures down to -5°C, with stiff R4 Maximum applicable thickness: 5 cm per layer.
steel fibres for repairing concrete. REPAIR MORTAR
Classification: EN 1504-3 - class R4 structural mortar.
Storage: 12 months.
ere + Fib
olv r Application: pouring into formwork.
P
rs
d e r + Fi b e
Packaging: 25 kg vacuum-packed polyethylene bags.
118
Mapegrout SV T TECHNICAL DATA:
Quick-setting and hardening, Maximum dimension of aggregate: 2.5 mm.
compensated-shrinkage thixotropic EN 1504-3 Mixing ratio: 100 parts of MAPEGROUT SV T with
12.5-13.5 parts of water.
mortar for repairing concrete and fixing IN COMPLIANCE WITH
Pot life of mix: 10 minutes (at +20°C).
drains, manholes and urban fittings in
EUROPEAN STANDARD
119
PRODUCTS FOR THE RESTORATION
OF MASONRY BUILDINGS
13. PRODUCTS FOR THE RESTORATION OF MASONRY BUILDINGS
13.2 Consolidating various types of weak and crumbly substrates (porous stone, brickwork,
tuff, installation mortar, render, etc.) by impregnating______________________________________________
Consolidante 8020 TECHNICAL DATA:
Reversible consolidator in solvent for Dry solids content: 3%.
the conservative restoration of porous Storage: 12 months.
Application: brush, roller or spray.
stone substrates, lime render and layers Consumption: 0.1-1.0 kg/m² (according to the type
of paint. of substrate and depth to be consolidated).
Packaging: 10 kg metallic drums.
122
13.3 Horizontal chemical barriers against capillary rising damp ___________________________________________
Mapestop TECHNICAL DATA:
Agent applied by injection made from Dimension of particles: 20-60 nm.
micro-emulsion, concentrated silane Mixing ratio in water: 1 : 15-19.
Silane/siloxane content: 100%.
and siloxane used to form a chemical Duration of solution: 24 hours.
barrier against capillary rising damp in Storage: 12 months.
masonry. Application: by gravity or suitable injection pump.
Consumption: according to the absorption of the
masonry. Approximately 8-9 kg/m of solution for a
40 cm thick wall, corresponding to 0.4-0.6 kg of neat
MAPESTOP.
Packaging: 1 kg metal can with spout.
123
13. PRODUCTS FOR THE RESTORATION OF MASONRY BUILDINGS
based render for repairing existing R-CS II Coefficient of permeability to water vapour: ≤ 10 μ.
masonry, including on buildings of RENDERING AND
Workability time of fresh mortar: approx. 60 min.
historical interest.
PLASTERING MORTAR
124
PoroMap Rinzaffo TECHNICAL DATA:
Pre-blended, salt-resistant mortar Maximum diameter of aggregate: 2.5 mm.
applied by hand before applying EN 998-1 Mixing ratio: 100 parts of POROMAP RINZAFFO with
17-18.6 parts of water.
POROMAP INTONACO dehumidifying IN COMPLIANCE WITH
Coefficient of permeability to water vapour: < 20 µ.
and insulating mortar.
EUROPEAN STANDARD
CS IV.
Storage: 12 months.
Application: continuous-mixing rendering machine.
Consumption: 7.5-8 kg/m² (for a 5 mm thick layer).
Packaging: 25 kg bags.
existing masonry work, including GP-CS II Workability time of fresh mortar: approx. 60 minutes.
those of historical interest, and on new RENDERING AND
PLASTERING MORTAR Minimum applicable thickness: 10 mm.
constructions. Maximum applicable thickness per layer: 30 mm.
Classification: EN 998-1 - type GP mortar,
category CS II.
EMICODE: EC1 R Plus - very low emission.
Storage: 12 months.
Application: continuous-mixing rendering machine
or gauging trowel.
Consumption: approx. 14.5 kg/m² (per cm of thickness).
Packaging: 25 kg bags.
EN 998-1
from natural hydraulic lime and GP-CS IV Porosity of the mortar while still fresh: 7%.
ECO-POZZOLAN, particularly suitable for RENDERING AND
PLASTERING MORTAR
Coefficient of permeability to water vapour: 60 µ.
Workability time of fresh mortar: approx. 60 minutes.
making “reinforced” and installation Minimum applicable thickness: 10 mm.
mortar. Maximum applicable thickness per layer: 40 mm.
EN 998-2 Classification:
IN COMPLIANCE WITH
– EN 998-1 - type GP mortar, category CS IV;
– EN 998-2 - type G mortar, class M 15.
EUROPEAN STANDARD
EN 998-2
125
13. PRODUCTS FOR THE RESTORATION OF MASONRY BUILDINGS
mortar for a natural finish on render. GP-CS IV Maximum applicable thickness per layer: 2 mm.
RENDERING AND
PLASTERING MORTAR
Classification: EN 998-1 - GP type mortar,
category CS IV.
EMICODE: EC1 R Plus - very low emission.
Storage: 12 months.
Colour: white or light pink.
Application: flat metal trowel.
Consumption: approx. 1.4 kg/m² (per mm of
thickness).
Packaging: 25 kg bags.
mortar for a rough finish on render. GP-CS IV Maximum applicable thickness per layer: 3 mm.
RENDERING AND
PLASTERING MORTAR
Classification: EN 998-1 - GP type mortar,
category CS IV.
EMICODE: EC1 R - very low emission.
Storage: 12 months.
Application: flat metal trowel.
Consumption: approx. 1.4 kg/m² (per cm of
thickness).
Packaging: 25 kg bags.
mortar for a smooth finish GP-CS II Maximum applicable thickness per layer: 1 mm.
on render. RENDERING AND
PLASTERING MORTAR
Classification: EN 998-1 - GP type mortar,
category CS II.
EMICODE: EC1 R Plus - very low emission.
Storage: 12 months.
Application: flat metal trowel.
Consumption: approx. 1.3 kg/m² (per cm of
thickness).
Packaging: 20 kg bags.
126
13.8 Brick, stone, tuff and mixed masonries________________________________________________________
Mape-Antique TECHNICAL DATA:
Allettamento EN 998-2
Maximum size of aggregate: 1.5 mm.
Mixing ratio: 100 parts of MAPE-ANTIQUE
Salt-resistant masonry mortar, made ALLETTAMENTO with 18-20 parts of water (4.5-5 l of
from natural hydraulic lime and IN COMPLIANCE WITH
EUROPEAN STANDARD water for each 25 kg bag of product).
Porosity of the mortar while still fresh: 6%.
EN 998-2
ECO-POZZOLAN, for installation layers and G-M5 Coefficient of permeability to water vapour: µ 15/35.
pointing on “natural finish” masonry. MASONRY MORTAR
Workability time of fresh mortar: approx. 60 min.
Minimum applicable thickness: 5 mm.
Maximum applicable thickness per layer: 30 mm.
Classification: EN 998-2 - G type mortar, class M 5.
Storage: 12 months.
Application: gauging trowel.
Consumption: 16.5 kg/m² (per cm of thickness).
Packaging: 25 kg sacks.
EN 998-1
(4-4.25 l of water for each 25 kg bag of product).
from natural hydraulic lime and GP-CS IV Porosity of the mortar while still fresh: 7%.
ECO-POZZOLAN, particularly suitable for RENDERING AND
PLASTERING MORTAR
Coefficient of permeability to water vapour: 60 µ.
Workability time of fresh mortar: approx. 60 minutes.
making “reinforced” and installation Minimum applicable thickness: 10 mm.
mortar. Maximum applicable thickness per layer: 40 mm.
EN 998-2 Classification:
IN COMPLIANCE WITH
– EN 998-1 - type GP mortar, category CS IV;
– EN 998-2 - type G mortar, class M 15.
EUROPEAN STANDARD
EN 998-2
127
RESTORATION OF
WOODEN STRUCTURES
14. RESTORATION OF WOODEN STRUCTURES
130
131
ADHESIVES AND SMOOTHING
COMPOUNDS FOR CELLULAR
CONCRETE BLOCKS
15. ADHESIVES AND SMOOTHING COMPOUNDS FOR CELLULAR CONCRETE BLOCKS
134
135
PRODUCTS FOR THE
RESTORATION OF CONCRETE
16. PRODUCTS FOR THE RESTORATION OF CONCRETE
138
16.2 Repairs to concrete with compensated-shrinkage mortar and binders_________________________________
Gravel 0-8 TECHNICAL DATA:
Aggregate with an assorted grain size Size of aggregate: assorted grain size from
for cementitious mortar, particularly EN 12620 0 to 8 mm.
Application: added as an aggregate.
suitable as a “filler” for STABILCEM. Packaging: 20 kg bags.
EN 13139
EN 13139
139
16. PRODUCTS FOR THE RESTORATION OF CONCRETE
140
Mapegrout FMR TECHNICAL DATA:
Two-component, shrinkage- Maximum dimension of aggregate: 2.5 mm.
compensated, sulphate-resistant, EN 1504-3 Mixing ratio: 100 parts of MAPEGROUT FMR with
thixotropic mortar fibre-reinforced with 17-18 parts of water.
IN COMPLIANCE WITH
Pot life of mix: approximately 1 hour (at 20°C).
flexible, alloy metal fibres, particularly
EUROPEAN STANDARD
EN 1504-3
e
machine.
ow Consumption: 19 kg/m² per cm of thickness.
rs
d e r + Fi b e
Packaging: 25 kg vacuum-packed polyethylene bags.
rs
d e r + Fi b e
thickness.
Packaging: 25 kg vacuum-packed polyethylene bags.
141
16. PRODUCTS FOR THE RESTORATION OF CONCRETE
combination with stiff steel fibres for R4 Maximum applicable thickness: 5 cm per layer.
repairing concrete. REPAIR MORTAR
Classification: EN 1504-3 - class R4 structural mortar.
Storage: 12 months.
ere + Fib
olv r Application: pouring into formwork.
P
rs
d e r + Fi b e
Packaging: 25 kg vacuum-packed polyethylene bags
142
Mapegrout T40 TECHNICAL DATA:
Medium-strength (40 MPa), Maximum dimension of aggregate: 2.5 mm.
fibre-reinforced thixotropic mortar EN 1504-3 Mixing ratio: 100 parts of MAPEGROUT T40 with
15.5-16.5 parts of water.
for repairing concrete. IN COMPLIANCE WITH
EUROPEAN STANDARD Pot life of mix: approximately 1 hour (at +20°C).
Minimum applicable thickness: 1 cm.
EN 1504-3
143
16. PRODUCTS FOR THE RESTORATION OF CONCRETE
EN 1504-3
R2
REPAIR MORTAR
144
145
SMOOTHING AND PROTECTIVE
PRODUCTS FOR CONCRETE AND
RENDER SURFACES
17. SMOOTHING AND PROTECTIVE PRODUCTS FOR CONCRETE AND RENDER SURFACES
EN 1504-3
EN 1504-3
R2
REPAIR MORTAR
148
Planitop 100 TECHNICAL DATA:
Quick-setting, light-grey coloured fine Maximum dimension of aggregate: 0.2 mm.
mortar for repairing and smoothing EN 1504-2 Mixing ratio: 100 parts of PLANITOP 100 with
26-27 parts of water.
concrete and render. IN COMPLIANCE WITH
EUROPEAN STANDARD Pot life of mix: 20-30 minutes (at +20°C).
Minimum applicable thickness: 1 mm.
EN 1504-2 (C)
PRINCIPLES
EN 1504-2 (C)
PRINCIPLES
(at +20°C).
MC-IR Minimum applicable thickness: 1 mm.
SURFACE PROTECTION
SYSTEMS FOR CONCRETE
Maximum applicable thickness: 3 mm per layer (6 mm in
2 layers with MAPENET 150 sandwiched between).
Classification:
– EN 998-1 - type GP mortar, category CS IV;
– EN 1504-2 - coating (C) principles MC and IR.
Storage: 12 months.
Colour: grey and white.
EN 998-1
Application: trowel.
IN COMPLIANCE WITH
Consumption: approximately 1.3 kg/m² per mm of
EUROPEAN STANDARD
EN 998-1 thickness.
GP-CS IV Packaging: 25 kg bags.
RENDERING AND
PLASTERING MORTAR
EN 998-1
GP-CS IV thickness.
RENDERING AND
Packaging: 25 kg bags.
PLASTERING MORTAR
EN 998-1
GP-CS IV thickness.
RENDERING AND
Packaging: 25 kg bags.
PLASTERING MORTAR
149
17. SMOOTHING AND PROTECTIVE PRODUCTS FOR CONCRETE AND RENDER SURFACES
EN 998-1
GP-CS IV thickness.
RENDERING AND
Packaging: 25 kg bags.
PLASTERING MORTAR
EN 998-1
GP-CS IV
RENDERING AND
PLASTERING MORTAR
150
Planitop 540 TECHNICAL DATA:
Water-repellent cementitious skimming Maximum dimension of aggregate: 0.4 mm.
EN 1504-2 Mixing ratio: 100 parts of PLANITOP 540 with
mortar with a fine-textured, natural 24-26 parts of water.
finish for render and concrete. IN COMPLIANCE WITH
EUROPEAN STANDARD Pot life of mix: approximately 2 hours (at +20°C).
Minimum applicable thickness: 1 mm.
EN 1504-2 (C)
PRINCIPLES
EN 998-1
GP-CS IV
RENDERING AND
PLASTERING MORTAR
EN 998-1
GP-CS IV
RENDERING AND
PLASTERING MORTAR
151
17. SMOOTHING AND PROTECTIVE PRODUCTS FOR CONCRETE AND RENDER SURFACES
EN 1504-2 (C)
Pot life of mix: 40 minutes (at +23°C).
PRINCIPLES
Minimum applicable thickness: 1 mm.
MC-IR Maximum applicable thickness: 3 mm per layer
SURFACE PROTECTION
SYSTEMS FOR CONCRETE
(up to 5 mm on limited areas).
Classification:
– EN 1504-2 - coating (C) principles MC and IR.
Storage: 12 months.
Application: trowel or rendering machine.
Consumption: 2 kg/m² per mm of thickness.
Packaging:
31.25 kg kits:
– 1.5 kg drums (comp. A);
– 4.75 kg drums (comp. B);
– 25 kg bags (comp. C).
152
153
PRODUCTS FOR ANCHORING
AND RAPID FIXING
18. PRODUCTS FOR ANCHORING AND RAPID FIXING
156
Mapefix PE SF TECHNICAL DATA:
Styrene-free, polyester resin European Technical Approval
Suitable substrates: all perforated substrates; may
option 7 for non cracked concrete
also be used on concrete, brickwork and mixed
chemical fastener for heavy loads. M8 ÷ M24 masonry.
Recommended perforation technique: drill or
hammer-drill.
Condition of hole for application: clean, dry or damp.
Application temperature range of substrate:
+5/+35°C.
Workability time at +20°C: 6’.
Final hardening time at +20°C: 45’ (dry substrate),
90’ (wet substrate).
Recommended diameter of fastener: from M8 to M24.
Certification available: CE mark; ETA option 7
(fasteners in compressive side).
Application: extrusion gun.
Packaging: 300 ml, 380 ml.
M8 ÷ M12 hammer-drill.
resins for light loads and masonry. Condition of substrate for application: dry.
Application temperature range of substrate: 0°/30°C.
Workability time at +20°C: 6’.
Final hardening time at +20°C: 45’.
Recommended diameter of fastener: from M8 to M24.
Certification available: CE mark; ETAG 029 (anchors
in masonry).
Application: extrusion gun.
Packaging: 300 ml, 380 ml.
157
PRODUCTS FOR STRUCTURAL
BONDING, SCREED REPAIRING AND
INJECTING INTO CRACKED CONCRETE
19. PRODUCTS FOR STRUCTURAL BONDING, SCREED REPAIRING AND INJECTING INTO CRACKED CONCRETE
Classification: EN 1504-4.
structural bonds. EN 1504-4
Storage: 24 months.
STRUCTURAL BONDING
Application: trowel.
Consumption: 1.60-1.65 kg/m² per mm of thickness.
Packaging:
6 kg kits:
– 4.5 kg drums (comp. A);
– 1.5 kg drums (comp. B).
30 kg kits:
– 22.5 kg drums (comp. A);
– 7.5 kg drums (comp. B).
160
Epojet TECHNICAL DATA:
Two-component, super-fluid epoxy Mixing ratio: comp. A : comp. B = 4 : 1.
resin applied by injecting. EN 1504-5 Pot life of mix: 40 minutes (at +23°C).
Classification: EN 1504-5 and EN 1504-6.
IN COMPLIANCE WITH
EUROPEAN STANDARD Storage: 24 months.
Application: injection or pouring.
EN 1504-5
Consumption:
CONCRETE INJECTION
– sealing cracks: 1.1 kg/l of cavities to be filled;
– bonding concrete to steel: 1.1 kg/m² per mm of
thickness.
Packaging:
2.5 kg kits:
– 2 kg drums (comp. A);
EN 1504-6
– 0.5 kg bottles (comp. B).
IN COMPLIANCE WITH
EUROPEAN STANDARD 4 kg kits:
– 3.2 kg drums (comp. A);
EN 1504-6
– 0.8 kg bottles (comp. B).
ANCHORING MORTAR
161
PRODUCTS FOR GALVANIC
CATHODIC PROTECTION OF
METALLIC STRUCTURES
20. PRODUCTS FOR GALVANIC CATHODIC PROTECTION OF METALLIC STRUCTURES
164
165
COMPOSITE SYSTEMS FOR
STRUCTURAL STRENGTHENING
21. COMPOSITE SYSTEMS FOR STRUCTURAL STRENGTHENING
6 kg kits:
– 4.5 kg drums (comp. A);
– 1.5 kg drums (comp. B).
168
Carbotube TECHNICAL DATA:
Pultruded carbon fibre tube Tensile modulus of elasticity: 170,000 N/mm².
impregnated with epoxy resin for Content of fibre by weight: 68%.
Tensile strength: 3,100 N/mm².
reinforced injections in masonry. Outside diameter: 10 mm.
Inside diameter: 8 mm.
Elongation at failure: 1.6%.
Packaging: boxes of 10x2 m rolls.
169
21. COMPOSITE SYSTEMS FOR STRUCTURAL STRENGTHENING
170
MapeWrap 11 TECHNICAL DATA:
Two-component, normal-setting, Mixing ratio: comp. A : comp. B = 3 : 1.
thixotropic epoxy grout for evening EN 1504-4 Workability time: 40 minutes (at +23°C).
Bond strength to concrete: > 3 N/mm² (after 7 days
out concrete surfaces. IN COMPLIANCE WITH
EUROPEAN STANDARD at +23°C - failure of substrate).
Classification: EN 1504-4.
EN 1504-4
Application: trowel.
STRUCTURAL BONDING
Consumption: 1.55 kg/m² per mm of thickness.
Packaging:
6 kg kits:
– 4.5 kg drums (comp. A);
– 1.5 kg drums (comp. B).
171
21. COMPOSITE SYSTEMS FOR STRUCTURAL STRENGTHENING
172
MapeWrap C UNI-AX TECHNICAL DATA:
High-strength, unidirectional carbon Weight: 300-600 g/m².
fibre fabric with a high modulus of Equivalent thickness of dry fabric: 0.166-0.333 mm.
Tensile strength: 4,830 N/mm².
elasticity (230,000 N/mm²). Tensile modulus of elasticity (GPa): 230.
A version with a very high modulus Elongation at failure: 2%.
of elasticity (390,000 N/mm²) with the Width: 10 - 20 - 40 cm.
same weight and width is also available Packaging: 50 m rolls.
upon request, called MAPEWRAP C
UNI-AX HM.
173
21. COMPOSITE SYSTEMS FOR STRUCTURAL STRENGTHENING
174
MapeWrap S FIOCCO TECHNICAL DATA:
High-strength, steel fibre cord for Type of fibre: high-strength carbon.
Diameters available: 10 and 12 mm.
structural strengthening. Load-resistant area per unit of width:
diam.10 mm 4,300 mm²/m;
diam.12 mm 5,200 mm²/m.
Maximum load per unit of width:
diam.10 mm 8,969.8 kN/m;
diam.12 mm 10,847.2 kN/m.
Thickness:
diam.10 mm 4.30 mm;
diam.12 mm 5.20 mm.
Modulus of elasticity: 210,000 N/mm².
Tensile strength: 2,086 N/mm².
Elongation at failure: > 2%.
Packaging: 10 m rolls.
NEW
N.B.: PLANITOP HPC is sold with FIBRES HPC Application: pouring into formwork.
(1.625 kg of FIBRES HPC per 25 kg bag of Consumption: approx. 20 kg/m² per cm of thickness.
PLANITOP HPC). Packaging: 25 kg vacuum-packed polyester bag.
NEW
EN 1504-3
175
21. COMPOSITE SYSTEMS FOR STRUCTURAL STRENGTHENING
EN 998-2
EN 998-2
176
177
PRODUCTS FOR
THERMAL INSULATION
22. PRODUCTS FOR THERMAL INSULATION
180
Mapetherm Cork TECHNICAL DATA:
Cork insulating panels for thermal Composition: expanded cork.
Colour: brown.
insulation systems. Thickness available mm: 40, 50, 60, 80 and 100.
Dimensions of panel mm: 1000 x 500.
Packaging: from 1.5 to 4 m² (according to the
thickness).
ETA 09/0394
181
22. PRODUCTS FOR THERMAL INSULATION
ETA 10/0024
ETA 10/0025
ETA 04/0061
182
Mapetherm Profil TECHNICAL DATA:
Pre-mounted aluminium angle iron Composition: aluminium:
incorporated with alkali-resistant glass Colour: grey.
Dimensions m: 2.50.
fibre mesh. Packaging: boxes of 100 pieces.
183
22. PRODUCTS FOR THERMAL INSULATION
184
185
PRODUCTS FOR TREATING
ASBESTOS CEMENT SLABS
23. PRODUCTS FOR TREATING ASBESTOS CEMENT SLABS
188
189
WALL PROTECTIVE AND
DECORATIVE COATINGS
24. WALL PROTECTIVE AND DECORATIVE COATINGS
Antipluviol Drop
Effect TECHNICAL DATA:
High-performance, silicone water- Consistency: fluid liquid.
repellent in watery solution for external Colour: transparent.
Density (EN ISO 2811-1) (g/cm³): approx. 1.02.
walls. Dry solids content: (EN ISO 3251) (%): approx. 5.
Dilution rate: supplied ready to use.
Surface drying time: 1-2 hours.
Application temperature range: from +5°C to +35°C.
Cleaning: water.
Storage: 24 months.
Application: roller, brush or spray.
Consumption: 0.1-0.5 kg/m² (for one coat of the
product, according to the porosity of the substrate).
Packaging: 5 and 25 kg.
Antipluviol S Drop
Effect TECHNICAL DATA:
Ultra high-performance, transparent, Consistency: liquid.
siloxane resin water-repellent Colour: transparent.
Density (EN ISO 2811-1) (g/cm³): approx. 0.8.
impregnator. Active substance content (%): 9.
Dilution rate: supplied ready to use.
Surface drying time: 1 hour.
Application temperature range: from +5°C to +35°C.
EN 1504-2
Cleaning: solvent (benzene, white spirit, etc.).
Storage: 24 months.
Application: roller, brush or spray.
IN COMPLIANCE WITH
EUROPEAN STANDARD
EN 1504-2 (C)
PRINCIPLES
Antipluviol W Drop
Effect TECHNICAL DATA:
Transparent, silane and siloxane water- Consistency: liquid.
repellent impregnator in watery solution. Colour: milky.
Density (EN ISO 2811-1) (g/cm³): approx. 1.01.
Active substance content (%): 8.
Dilution rate: supplied ready to use.
Application temperature range: from +5°C to +35°C.
Cleaning: water.
Storage: 24 months.
Application: roller, brush or spray.
Consumption: 0.2-1 kg/m² (for one coat of the
product, according to the porosity of the substrate).
Packaging: 2 and 10 kg.
EN 1504-2 (C)
PRINCIPLES Density (EN ISO 2811-1) (g/cm³): approx. 1.27.
PI-MC-IR Dry solids content: (EN ISO 3251) (%): approx. 59.
SURFACE PROTECTION
SYSTEMS FOR CONCRETE Dilution rate: 10-15% of water.
Waiting time between each coat: 24 hours.
Application temperature range: from +5°C to +35°C.
Cleaning: water.
Storage: 24 months.
Application: roller, brush or spray.
Consumption: 0.25-0.3 kg/m² (for two coats).
Packaging: 20 kg.
192
Colorite Matt TECHNICAL DATA:
Highly-transpirant water-based paint for Consistency: thick liquid.
internal and external use with excellent Colour: white or various colours using the ColorMap®
automatic colouring system.
hiding power. Density (EN ISO 2811-1) (g/cm³): approx. 1.65.
Dry solids content: (EN ISO 3251) (%): approx. 65.
Dilution rate: 15-20% of water.
Waiting time between each coat: 24 hours.
Application temperature range: from +5°C to +35°C.
Cleaning: water.
Storage: 24 months.
Application: roller, brush or spray.
Consumption: 0.3-0.4 kg/m² (for two coats of the
product).
Packaging: 5 and 20 kg.
193
24. WALL PROTECTIVE AND DECORATIVE COATINGS
194
Elastocolor Rasante TECHNICAL DATA:
Fibre-reinforced, elastomeric, high Consistency: thick liquid.
flexibility finishing product with good EN 1504-2 Colour: white or various colours using the ColorMap®
automatic colouring system.
defect covering capacity, for internal IN COMPLIANCE WITH
Density (EN ISO 2811-1) (g/cm³): approx. 1.35.
and external applications.
EUROPEAN STANDARD
195
24. WALL PROTECTIVE AND DECORATIVE COATINGS
196
Quarzolite Graffiato TECHNICAL DATA:
Highly protective acrylic scratch- Consistency: paste.
EN 15824 Colour: white or various colours using the ColorMap®
effect coating product for evening out automatic colouring system.
surface defects on internal and external IN COMPLIANCE WITH
EUROPEAN STANDARD
Density (EN ISO 2811-1) (g/cm³): approx. 1.7-1.8
surfaces.
EN 15824
V2 W3
A2-s1 d0
(according to the grain size).
Available in the following granulometries: EXTERNAL AND INTERNAL PLASTERS
Dry solids content: (EN ISO 3251) (%): approx. 85.
1.2 mm and 1.8 mm. Dilution rate: supplied ready to use.
BASED ON ORGANIC BINDERS
EN 15824
197
24. WALL PROTECTIVE AND DECORATIVE COATINGS
Silancolor Drop
Effect
TECHNICAL DATA:
Cleaner Plus Consistency: fluid liquid.
Colour: transparent.
Hygienising detergent in watery Density (EN ISO 2811-1) (g/cm³): approx. 1.01.
solution. Dilution rate: 300% of water.
Waiting time before applying other products:
24 hours.
Application temperature range: from +5°C to +35°C.
Cleaning: water.
Storage: 24 months.
Application: manual spray or brush.
Consumption: 0.2-1 kg/m² (ready-to-use solution).
Packaging: 1 and 5 kg.
198
Silancolor Graffiato TECHNICAL DATA:
Transpirant, water-repellent, scratch- Consistency: paste.
EN 15824 Colour: white or various colours using the ColorMap®
effect, trowelable siloxane coating automatic colouring system.
product with good defect covering IN COMPLIANCE WITH
EUROPEAN STANDARD
Density (EN ISO 2811-1) (g/cm³): approx. 1.7-1.8
properties for internal and external
EN 15824
1.2 mm and 1.8 mm. Waiting time between each coat: 24 hours.
Drop
Effect Application temperature range: from +5°C to +35°C.
Cleaning: water.
ETA 10/0024 Storage: 24 months.
ETA 10/0025 Application: stainless steel or plastic float.
Consumption:
– 1.2 mm: 1.9-2.3 kg/m²;
– 1.8 mm: 2.4-2.8 kg/m².
Packaging: 20 kg.
199
24. WALL PROTECTIVE AND DECORATIVE COATINGS
EN 15824
200
Silexcolor Graffiato TECHNICAL DATA:
Transpirant, scratch-effect silicate Consistency: paste.
EN 15824 Colour: white or various colours using the ColorMap®
coating product with defect-covering automatic colouring system.
properties for internal and external IN COMPLIANCE WITH
EUROPEAN STANDARD
Density (EN ISO 2811-1) (g/cm³): approx. 1.7-1.8
surfaces, according to DIN 18363
EN 15824
V1 W2
A2-s1 d0
(according to the grain size).
Standards. EXTERNAL AND INTERNAL PLASTERS
Dry solids content: (EN ISO 3251) (%): approx. 80.
Available in the following granulometries: Dilution rate: supplied ready to use.
BASED ON ORGANIC BINDERS
1.2 mm and 1.8 mm. Waiting time between each coat: 24 hours.
Application temperature range: from +5°C to +35°C.
Cleaning: water.
ETA 10/0024 Storage: 12 months.
ETA 10/0025 Application: stainless steel or plastic float.
Consumption:
– 1.2 mm: 1.9-2.3 kg/m²;
– 1.8 mm: 2.4-2.8 kg/m².
Packaging: 20 kg.
201
24. WALL PROTECTIVE AND DECORATIVE COATINGS
202
203
WATERPROOFING SYSTEMS
25. WATERPROOFING SYSTEMS
206
Mapelastic Foundation TECHNICAL DATA:
Two-component, flexible cementitious Consistency: thixotropic.
mortar for waterproofing concrete EN 1504-2 Mixing ratio: comp. A: comp. B = 2.2 : 1.
Pot life of mix: approximately 1 hour (at +20°C).
surfaces subject to negative and IN COMPLIANCE WITH
Application temperature range: from +5°C to +40°C.
positive hydraulic lift.
EUROPEAN STANDARD
EN 1504-2 (C)
PRINCIPLES Minimum applicable thickness: 2 mm in 2 coats.
PI-MC-IR Classification: EN 1504-2 - coating (C) principles PI,
SURFACE PROTECTION
SYSTEMS FOR CONCRETE
MC and IR.
Storage: 12 months.
Application: roller or spray.
Consumption:
– by roller: 1.65 kg/m² per mm of thickness;
– by spray: 2.2 kg/m² per mm of thickness.
Packaging:
32 kg kits:
component A: 22 kg bags;
component B: 10 kg drums.
207
25. WATERPROOFING SYSTEMS
208
Plastimul 1K Super TECHNICAL DATA:
Plus Consistency: paste.
Density: 0.65 g/cm³.
Mono-component, solvent-free, quick- pH: 10.
drying, low-shrinkage, high-yield, Dry solids content: 60%.
high flexibility bitumen waterproofing Storage: 12 months.
Application temperature range: from +5°C to +30°C.
emulsion containing polystyrene Drying time: approximately 2 days.
spheres and rubber granules. Resistance to water: after complete hardening
approx. 2 days.
Resistance to rain: after approx. 4 hours.
Resistance to heat (DIN 52123): ≥ 70°C.
Crack-bridging according to DIN 28052: ≥ 2 mm
at +4°C.
Consumption: 0.65 kg/m² per mm of thickness of
fresh product according to the type of substrate.
Packaging: 19.5 kg drums.
209
25. WATERPROOFING SYSTEMS
210
Aquaflex Roof TECHNICAL DATA:
Ready-to-use flexible liquid membrane Consistency: paste.
Application temperature range: from +5°C to +35°C.
with fibres for continuous waterproofing Waiting time between first and second coat:
layers on exposed external surfaces. approximately 8 hours.
Set to foot traffic: 12 hours at +23°C.
Minimum applicable thickness: 1 mm in 2 coats.
Colour: white, grey, brick red and oxide red.
Storage: 24 months.
Application: roller, brush or trowel.
Consumption: 1.3 kg/m² per mm of thickness.
Packaging: 5 and 20 kg drums.
211
25. WATERPROOFING SYSTEMS
212
Mapelastic Smart TECHNICAL DATA:
Two-component, high-flexibility Consistency of mix: fluid-brushable.
EN 1504-2 Mixing ratio: comp. A: comp. B = 2 : 1.
cementitious mortar applied by brush or Pot life of mix: approximately 1 hour.
with a roller, for waterproofing concrete IN COMPLIANCE WITH
EUROPEAN STANDARD Application temperature range: from +5°C to +40°C.
surfaces such as balconies, terraces, EN 1504-2 (C)
PRINCIPLES Minimum applicable thickness: 2 mm in 2 coats.
bathrooms and swimming pools and for PI-MC-IR Classification: EN 1504-2 - coating (C) principles PI,
protecting against aggressive agents.
SURFACE PROTECTION
SYSTEMS FOR CONCRETE
MC and IR.
Storage: 12 months.
Application: brush, roller or spray.
Consumption:
– brush or roller: 1.6 kg/m² per mm of thickness;
– spray: 2.2 kg/m² per mm of thickness.
Packaging: 30 kg units: 20 kg bags + 10 kg tanks.
213
25. WATERPROOFING SYSTEMS
214
Purtop HA NEW TECHNICAL DATA:
Manually-applied two-component, A/B ratio (by weight): 100/106.5.
Mechanical characteristics (after 7 days at +23°C):
polyurea waterproofing membrane. – tensile strength (DIN 53504) (N/mm²): 10;
– elongation at failure (DIN 53504) (%): 500;
– tear strength (ISO 34-1) (N/mm): 40;
– shore A hardness (DIN 53505): 72;
– glass transition temperature (°C): -55.
NEW
Application: notched trowel.
Consumption: 2.6 kg/m² per 2.0 mm of thickness.
Packaging:
– component A: 10 kg drum;
– component B: 10.7 kg drum.
215
25. WATERPROOFING SYSTEMS
216
Idrostop Soft NEW TECHNICAL DATA:
Hydro-expansive, high-flexibility Shape: pre-formed strip.
Size: 25x20 mm.
bentonite jointing profile for Solubility in water: non-soluble.
waterproofing construction joints and Waterproofing capacity: up to 8 bar.
second pours of concrete. Application: bonded in place using MAPEFLEX
MS 45 or ULTRABOND MS RAPID one-component
adhesives.
Application temperature range: from –15°C to
+60°C.
Packaging: 6 x 5 m rolls.
217
25. WATERPROOFING SYSTEMS
218
Mapefoam TECHNICAL DATA:
Closed-cell, extruded foam polyethylene Density: 40 kg/m³.
Tensile strength: 30 N/mm².
cord used as a support for elastomer Water absorption: none.
sealants to gauge the correct size of Colour: grey.
flexible joints. In service temperature range: from -40°C to +80°C.
Supplied in hanks, total length Packaging:
proportional to the diameter. Ø 6 mm, boxes of 550 m
Ø 10 mm, boxes of 550 m
Ø 15 mm, boxes of 550 m
Ø 20 mm, boxes of 350 m
Ø 25 mm, boxes of 200 m
Ø 30 mm, boxes of 160 m
219
ADMIXTURES FOR CONCRETE
26. ADMIXTURES FOR CONCRETE
NEW
222
Mapeair AE1 NEW TECHNICAL DATA:
(former Mapeplast PT1) Dosage:
EN 934-2
T5 – concrete: from 30 to 150 ml every 100 kg of cement.
Aerating product for concrete and – cementitious mortar: from 100 to 300 ml every
cementitious mortar. 100 kg of binder.
Packaging: 10 and 25 kg tanks.
NEW
223
26. ADMIXTURES FOR CONCRETE
NEW
concrete.
224
Mapefluid PZ504 TECHNICAL DATA:
Pozzolanic-activity super-plasticiser in Dosage: from 20 to 60 kg per m³ of mix.
EN 934-2
Packaging: 11 kg vacuum-packed polyethylene bags.
powder form for high-quality mortar and T 11.1-11.2-9
NEW
225
26. ADMIXTURES FOR CONCRETE
NEW
226
Mapeform Eco 61 NEW TECHNICAL DATA:
Chemical-action vegetable oil-based Application: by spray with suitable spray system.
Consumption: from 15 to 25 g/m² on metal or plastic
form-release agent in water emulsion to formwork.
improve exposed surfaces. Particularly Packaging: 23 kg tanks.
suitable for use on horizontal surfaces.
Also suitable for steam curing cycles.
NEW
NEW
NEW
227
26. ADMIXTURES FOR CONCRETE
228
229
AGGREGATES AND MORTARS
FOR THE BUILDING INDUSTRY
27. VAGA - AGGREGATES AND MORTARS FOR THE BUILDING INDUSTRY
MALTE MALTE
PER INTONACI PER MURATURA
CS IV M5
CONFORME ALLA NORMA CONFORME ALLA NORMA
EUROPEA EN 998-1 EUROPEA EN 998-2
232
FIBROstabilitura TECHNICAL DATA:
FIBROstabilitura is a transpirant Mixing ratio: supplied ready to use, blend before use
if necessary.
finishing mortar for masonry suitable Coefficient of permeability to water vapour: µ=9.
for internal and external biocompatible Composition: Slaked lime (type CL 90-S PL), fine
render without cracks or crazing. natural silica sand (cat. 0/1 mm) and micro-fibres.
FIBROstabilitura is reinforced with fibres Packaging: 25 kg bags.
which guarantee that no shrinkage Yield: 1.7 kg x m² x mm of rendered finish.
cracks or crazing form during drying,
and has unrivalled workability.
FIBROstabilitura is a highly ecological
product which responds fully to the
construction requirements of eco-
friendly building work.
MALTE MALTE
PER INTONACI PER MURATURA
CS IV M15
CONFORME ALLA NORMA CONFORME ALLA NORMA
EUROPEA EN 998-1 EUROPEA EN 998-2
MALTE MALTE
PER INTONACI PER MURATURA
CS IV M5
CONFORME ALLA NORMA CONFORME ALLA NORMA
EUROPEA EN 998-1 EUROPEA EN 998-2
233
27. VAGA - AGGREGATES AND MORTARS FOR THE BUILDING INDUSTRY
C20-F4
for parquet and resilient coverings. CONFORME ALLA NORMA
EUROPEA EN 13813
A1fl
234
TICINO TECHNICAL DATA:
Selected, washed aggregates with Grain size: from 0.1 mm to 0.9 mm.
Category: 0/1 mm according to EN 12620.
the CE symbol, suitable for concrete, EN 12620
Category: 0/1 mm according to EN 13139.
bitumen conglomerates and site mortar. Packaging: VAGA TICINO sand is available:
Ideal for preparing finishing mortar – in 25 kg bags;
and fine render on site. Also used in – bulk;
horticulture and in all those sectors and EN 13139
– in 1.5 t big bags.
applications where the use of extra-fine
natural sand is required.
235
27. VAGA - AGGREGATES AND MORTARS FOR THE BUILDING INDUSTRY
236
237
SELECTION CHARTS
The installation suggestions in this table are to be considered merely for indication purposes and refer only to normal conditions. For further information, refer to the relative Technical Data Sheet for each product. Defining the
most suitable installation system is highly influenced by the conditions on site and the format of the tiles to be installed. For all special cases, contact the Mapei Technical Assistance Department or the relative technical guides. 239
SELECTION CHARTS
MAPETHERM TILE SYSTEM, for installing thin porcelain tiles on thermal < 5000 cm2
(the longer side must be no more
insulation systems than 100 cm)
KEY
EPOXY-POLYURETHANE adhesive
240
RECOMMENDED ADHESIVES
NORMAL SETTING FAST SETTING
ULTRALITE S2 QUICK
KERAFLEX MAXI S1 GRANIRAPID
KERALASTIC
KERAQUICK + LATEX PLUS
KERALASTIC T
ELASTORAPID
KERABOND + ISOLASTIC
ULTRALITE S2 QUICK
ULTRALITE S2
KERAQUICK + LATEX PLUS
The installation suggestions in this table are to be considered merely for indication purposes and refer only to normal conditions. For further information, refer to the relative Technical Data Sheet for each product. Defining the
most suitable installation system is highly influenced by the conditions on site and the format of the tiles to be installed. For all special cases, contact the Mapei Technical Assistance Department or the relative technical guides. 241
SELECTION CHARTS
NORMAL SETTING FAST SETTING NORMAL SETTING FAST SETTING NORMAL SETTING
KERAFLEX EASY
Concrete floor slabs and ULTRALITE S1 QUICK ADESILEX P9 ULTRALITE S1 QUICK
ADESILEX P10 + ULTRALITE S1
flooring ISOLASTIC 50% ELASTORAPID KERAFLEX EASY GRANIRAPID
KERAFLEX MAXI S1
KERAFLEX EASY
ULTRALITE S1 QUICK ADESILEX P9 ULTRALITE S1 QUICK
ADESILEX P10 +
Heated screeds ISOLASTIC 50% ULTRALITE S1
ELASTORAPID KERAFLEX EASY GRANIRAPID
KERAFLEX MAXI S1
KERAFLEX EASY
Existing ceramic, terrazzo or ULTRALITE S1 QUICK ADESILEX P9 ULTRALITE S1 QUICK
ADESILEX P10 + ULTRALITE S1
natural stone floors ISOLASTIC 50% ELASTORAPID KERAFLEX EASY GRANIRAPID
KERAFLEX MAXI S1
KERAQUICK + KERAQUICK +
Metal surfaces KERALASTIC LATEX PLUS KERALASTIC LATEX PLUS KERALASTIC
KEY
HYDRAULIC BINDER-BASED adhesive
EPOXY-POLYURETHANE adhesive
EPOXY adhesive
242
STONE
Dimensionally-stable stone Stone with poor dimensional Stone with no dimensional stability
(class A according to MAPEI stability (class B according to MAPEI (class C according to MAPEI classification
classification system) not sensitive classification system) or stone system) or resin-based recomposed
to staining sensitive to staining material sensitive to heat
FAST SETTING NORMAL SETTING FAST SETTING NORMAL SETTING FAST SETTING
GRANIRAPID
KERAFLEX EASY
ULTRALITE S1 QUICK
KERAFLEX EASY
ELASTORAPID
KERAFLEX MAXI S1
ULTRALITE S1 QUICK
ULTRALITE S1
ADESILEX P4
KERAQUICK
GRANIRAPID KERAQUICK
KERAFLEX EASY KERAQUICK +
ULTRALITE S1 QUICK KERAQUICK + LATEX PLUS
LATEX PLUS KERALASTIC
ULTRALITE S1 QUICK
ULTRALITE S1 QUICK
KERAFLEX EASY KERAPOXY ADHESIVE
ULTRALITE S2 QUICK
ELASTORAPID ULTRALITE S2 QUICK
KERAFLEX MAXI S1 GRANIRAPID
ULTRALITE S1 QUICK GRANIRAPID
ULTRALITE S1 ELASTORAPID
ELASTORAPID
KERAFLEX EASY
ELASTORAPID
KERAFLEX MAXI S1
ULTRALITE S1 QUICK
ULTRALITE S1
KERALASTIC
KERAFLEX EASY
ELASTORAPID
KERAFLEX MAXI S1
ULTRALITE S1 QUICK
ULTRALITE S1
KERABOND +
ISOLASTIC KERAQUICK +
ELASTORAPID ELASTORAPID LATEX PLUS
KERALASTIC
The installation suggestions in this table are to be considered merely for indication purposes and refer only to normal conditions. For further information, refer to the relative Technical Data Sheet for each product. Defining the
most suitable installation system is highly influenced by the conditions on site and the format of the tiles to be installed. For all special cases, contact the Mapei Technical Assistance Department or the relative technical guides. 243
SELECTION CHARTS
NORMAL SETTING FAST SETTING NORMAL SETTING FAST SETTING NORMAL SETTING
TIXOBOND WHITE
ADESILEX P9
Cementitious render or skim ADESILEX P10 ULTRALITE S1 QUICK KERABOND ULTRALITE S1 QUICK
KERAFLEX
coats ULTRAMASTIC III KERAQUICK ADESILEX P9 KERAQUICK
ULTRAMASTIC III
ADESILEX P22
KERAFLEX
ADESILEX P10 + ADESILEX P9
ULTRALITE S1 QUICK ULTRALITE S1 QUICK ULTRALITE S1
Concrete ISOLASTIC 50% KERAFLEX
ELASTORAPID GRANIRAPID KERAFLEX MAXI S1
ULTRAMASTIC III ADESILEX P22
ULTRAMASTIC III
TIXOBOND WHITE
Expanded or cellular cement ADESILEX P9
ADESILEX P10 ULTRALITE S1 QUICK KERABOND ULTRALITE S1 QUICK
blocks (with PRIMER G or KERAFLEX
ULTRAMASTIC 5 KERAQUICK ADESILEX P9 KERAQUICK
ECO PRIM T) ULTRAMASTIC 5
ULTRAMASTIC 5
TIXOBOND WHITE
Lime-based skim coats or ADESILEX P9
ADESILEX P10 ULTRALITE S1 QUICK KERABOND ULTRALITE S1 QUICK
render (with PRIMER G or KERAFLEX
ULTRAMASTIC III (*) KERAQUICK ADESILEX P9 KERAQUICK
ECO PRIM T) ULTRAMASTIC III (*)
ADESILEX P22 (*)
ADESILEX P9 ADESILEX P9
ADESILEX P10 ULTRALITE S1 QUICK ULTRALITE S1 QUICK
Plasterboard KERAFLEX KERAFLEX
ULTRAMASTIC III KERAQUICK KERAQUICK
ADESILEX P22 ULTRAMASTIC III
TIXOBOND WHITE
ADESILEX P9
Cement-fibre panels (with ADESILEX P10 ULTRALITE S1 QUICK KERABOND ULTRALITE S1 QUICK
KERAFLEX
PRIMER G or ECO PRIM T) ULTRAMASTIC 5 KERAQUICK ADESILEX P9 KERAQUICK
ULTRAMASTIC 5
ULTRAMASTIC 5
KEY
HYDRAULIC BINDER-BASED adhesive
EPOXY-POLYURETHANE adhesive
EPOXY adhesive
READY-TO-USE DISPERSION adhesive
FAST SETTING NORMAL SETTING FAST SETTING NORMAL SETTING FAST SETTING
ULTRALITE S1 QUICK
KERAFLEX
GRANIRAPID
KERAFLEX
ELASTORAPID
KERAFLEX MAXI S1
ULTRALITE S1 QUICK
ULTRALITE S1
KERAQUICK
ULTRALITE S1 QUICK KERAQUICK
KERAFLEX ADESILEX P4
GRANIRAPID KERAQUICK +
KERAQUICK + LATEX PLUS
LATEX PLUS KERALASTIC T
ULTRALITE S1 QUICK
ULTRALITE S1 QUICK KERAPOXY ADHESIVE
ULTRALITE S2 QUICK
ULTRALITE S2 QUICK
GRANIRAPID GRANIRAPID
KERAFLEX GRANIRAPID
ULTRALITE S1 QUICK ELASTORAPID
ELASTORAPID
ULTRALITE S1 QUICK
KERAFLEX KERALASTIC T
GRANIRAPID
KERAFLEX
ELASTORAPID
KERAFLEX MAXI S1
ULTRALITE S1 QUICK
ULTRALITE S1
KERAQUICK + KERABOND +
LATEX PLUS ISOLASTIC KERAQUICK + KERAQUICK +
LATEX PLUS LATEX PLUS
ELASTORAPID KERALASTIC T
ULTRALITE S1 QUICK
ULTRALITE S1 QUICK GRANIRAPID
KERAFLEX GRANIRAPID KERALASTIC T
GRANIRAPID ULTRALITE S1 QUICK
KERAQUICK
The installation suggestions in this table are to be considered merely for indication purposes and refer only to normal conditions. For further information, refer to the relative Technical Data Sheet for each product. Defining the
most suitable installation system is highly influenced by the conditions on site and the format of the tiles to be installed. For all special cases, contact the Mapei Technical Assistance Department or the relative technical guides. 245
SELECTION CHARTS
KERAFLEX EASY
Cementitious screeds and screeds made GRANIRAPID
KERAFLEX MAXI S1
from special binders ULTRALITE S1 QUICK
ULTRALITE S1
ULTRALITE S1
ELASTORAPID
ADESILEX P10 + ULTRALITE S1 QUICK ULTRALITE S2
Surfaces waterproofed with MAPELASTIC ISOLASTIC 50% ULTRALITE S1 QUICK
ELASTORAPID KERAFLEX MAXI S1
ULTRALITE S2 QUICK
KERABOND + ISOLASTIC
ULTRALITE S1
ELASTORAPID
ULTRALITE S2
Concrete ULTRALITE S1 QUICK
KERAFLEX MAXI S1
ULTRALITE S2 QUICK
KERABOND + ISOLASTIC
ULTRALITE S1 ELASTORAPID
ADESILEX P10 + ULTRALITE S1 QUICK ULTRALITE S2 KERAQUICK + LATEX PLUS
Cementitious render or concrete ISOLASTIC 50% ELASTORAPID KERAFLEX MAXI S1 ULTRALITE S1 QUICK
KERABOND + ISOLASTIC ULTRALITE S2 QUICK
ULTRALITE S1 GRANIRAPID
Cementitious screeds, screeds made with
ADESILEX P10 + ULTRALITE S2 ELASTORAPID
special binders, concrete and surfaces ISOLASTIC 50% ELASTORAPID
KERAFLEX MAXI S1 ULTRALITE S1 QUICK
waterproofed with MAPELASTIC KERABOND + ISOLASTIC ULTRALITE S2 QUICK
KEY
HYDRAULIC BINDER-BASED adhesive
EPOXY-POLYURETHANE adhesive
EPOXY adhesive
KERAFLEX EASY
KERAFLEX MAXI S1
ULTRALITE S1
ULTRALITE S1
ULTRALITE S1 QUICK ULTRALITE S1 QUICK
ULTRALITE S2 KERALASTIC T
GRANIRAPID KERAPOXY ADHESIVE GRANIRAPID
KERAFLEX MAXI S1 KERAPOXY ADHESIVE
KERAQUICK KERAQUICK
KERABOND + ISOLASTIC
ULTRALITE S1
ULTRALITE S2
KERAFLEX MAXI S1
KERABOND + ISOLASTIC
STONE
Dimensionally-stable stone (class A according Stone with poor dimensional stability (class B Stone with no dimensional stability (class C
to MAPEI classification system) not sensitive according to MAPEI classification system) or according to MAPEI classification system) or
to staining stone sensitive to staining resin-based recomposed material sensitive
to heat
ULTRALITE S1
ULTRALITE S2 QUICK ULTRALITE S2 QUICK
ULTRALITE S2 KERALASTIC T
GRANIRAPID KERAPOXY ADHESIVE GRANIRAPID
KERAFLEX MAXI S1 KERAPOXY ADHESIVE
KERAQUICK KERAQUICK
KERABOND + ISOLASTIC
STONE
Dimensionally-stable stone (class A according Stone with poor dimensional stability (class B Stone with no dimensional stability (class C
to MAPEI classification system) not sensitive according to MAPEI classification system) or according to MAPEI classification system) or
to staining stone sensitive to staining resin-based recomposed material sensitive
to heat
ULTRALITE S1 GRANIRAPID
ULTRALITE S2 ELASTORAPID
- - -
KERAFLEX MAXI S1 ULTRALITE S1 QUICK
KERABOND + ISOLASTIC ULTRALITE S2 QUICK
KERAPOXY ADHESIVE - - - -
The installation suggestions in this table are to be considered merely for indication purposes and refer only to normal conditions. For further information, refer to the relative Technical Data Sheet for each product. Defining the
most suitable installation system is highly influenced by the conditions on site and the format of the tiles to be installed. For all special cases, contact the Mapei Technical Assistance Department or the relative technical guides. 247
SELECTION CHARTS
conglomerate
in lightweight
Ceramic tiles
cementitious
cut stone
Mosaic
Stone
Cotto
ULTRACOLOR PLUS
(joints from 2 to 20 mm) ■ ■ • •
KERACOLOR SF
(joints up to 4 mm) ■ ■ ■
CEMENTITIOUS
GROUTS KERACOLOR FF
(joints up to 6 mm) ■ ■ ■
KERACOLOR GG
(joints from 4 to 15 mm) ■ ■ ■
KERAPOXY
(joints of at least 3 mm) ■ ■
KERAPOXY DESIGN
EPOXY GROUTS
(joints from 2 to 7 mm) •
KERAPOXY P ■
KERAPOXY CQ ■
KERAPOXY IEG ■
READY-TO-USE FLEXCOLOR ■ ■
PASTE
PRODUCTS FIX & GROUT BRICK •
PRODUCTS FOR
LAYING PORPHYRY
KERACOLOR PPN •
AND ROUGH-CUT MAPESTONE PFS •
STONE MAPESTONE PFS PCC2 •
MAPESIL AC • ■ •
MAPESIL LM ■ • ■ • •
MAPEFLEX PU21 ■
FLEXIBLE MAPEFLEX PU20 ■
JOINTS MAPEFLEX PU30 ■
MAPEFLEX PU40 ■ ■ ■ ■
MAPEFLEX PU45 ■ ■ ■ ■
MAPEFLEX PU50SL ■ ■ • ■
Foodstuffs industries
Façade coatings
Public buildings
Bathrooms and
Meat factories
Footpaths and
Supermarkets
Balconies and
environments
Turkish baths
for vehicles
Residential
courtyards
kitchens
terraces
• • • • • • • • ■
■ ■ ■* ■* ■*
■ ■ ■* ■* ■*
■ ■ ■* ■* ■* ■- •* ■- •* ■* ■
■ • ■ • • ■ ■ •
■ • • • •
■ ■ • • •
■ ■ • • •
•
•
■ ■
■ • • •
• • • •
• • • •
• • ■ • • ■ ■
■ ■ • ■ ■ • ■
■ ■ ■ ■
• • • •
■ ■ ■ ■
■ ■ ■ ■
■ ■ ■ ■ ■ ■ ■ ■ ■
■ ■ ■ • • •
The installation suggestions in this table are to be considered merely for indication purposes and refer only to normal conditions. For further information, refer to the relative Technical Data Sheet for each product. Defining the
most suitable installation system is highly influenced by the conditions on site and the format of the tiles to be installed. For all special cases, contact the Mapei Technical Assistance Department or the relative technical guides. 249
SELECTION CHARTS
Mapegrout LM2K
Mapegrout FMR
Mapegrout T40
Mapegrout T60
Mapegrout BM
Easy Flow GF
Thixotropic
Mapegrout
Mapegrout
Mapegrout
Easy Flow
Repair of concrete layer around reinforcement rods • • • • • • • •
Type of repair
Structural repair • • • • • • • •
Classification according to EN 1504-3 Standards R4 R3 R4 R4 R4 R4 R4 R3
Trowel/flat trowel • • • • • • • •
Continuous-mix rendering machine
Application
Rendering machine with pre-mixing unit • • • • • • •
By casting
Repairs to the corners of beams and columns • • • • •
Repairs to the edges of balconies • • • • •
Civil
Repairs to ceilings • • • • •
construction
Repairs to gutters • • • • •
Repairs to parapets • • • • •
Fixing columns in place
Repairs to buffer panels • • • • •
Industrial
Repairs to floors •
construction
Repairs to beams and columns • • • • •
Fixing machinery in place
Repairs to piles • • • • • • •
Repairs to beams • • • • • • •
Bridges and viaducts
Repairs to kerbs • • • • •
Repairs to joints in motorways •
Repairs to walls • • • • • •
Hydraulic construction
Repairs to plateaus • • • • •
Repairs to joints • • • • •
Repairs to upstream faces • • • • •
Repairs to downstream faces • • • • •
Repairs to overflow channels • • • • •
Highway Fixing inspection shafts, manholes
maintenance and urban fittings in place
250
Rapid-setting thixotropic mortars Normal-setting castable mortars Rapid-setting castable mortars Cementitious binders
Stabilcem SCC
Mapegrout SV
Hi-Flow TI 20
Planitop 400
Mapegrout
Mapegrout
Mapegrout
Mapegrout
Mapegrout
Hi-Flow GF
Stabilcem
Fast-Set
Planitop
SV Fiber
Hi-Flow
• • • • • • • • • • •
• • • • • • •
R3 R3 R3 R4 R2 R4 R4 R4 R4 R4 / /
• • • • •
•
•
• • • • • • •
• • • •
• • • •
• •
• •
• •
• • • •
• • •
• •
• • • • •
• • • • •
• •
• •
• •
• • • • • • •
• • • • • • •
• • • • •
• • • • •
•
• • • • • • •
• • • • • •
251
SELECTION CHARTS
TYPE OF SUBSTRATE
TYPE OF
SETTING
ABSORBENT NON-ABSORBENT
Plastic coating
Internal render
“Fresh” render
Glass mosaics
Porcelain tiles
Concrete
Normal
Rapid
Mapefinish 0.4 • •
Monofinish 0.4 • •
252 * Apart from being fully “cured”, substrates must also be “dry”.
CE MARKING COMPOSITION COLOUR
Lime-gypsum
Cementitious
Lime-cement
EN 1504-2
EN 998-1
White
Grey
• • •
• • • • •
• • • • •
• • • • •
• • • • •
• • • •
• • • •
• • • • •
• • • • •
• • •
• •
• • • •
• • •
• • •
• • •
253
SELECTION CHARTS
Mapeflex Firestop
Mapeflex AC-PRO
Mapeflex AC-FR
Mapesil Z Plus
Mapeflex AC-P
Mapesil 300°C
Mapeflex AC4
Super Grip*
Mapesil AC
Ultrabond
Mapesil Z
1200°C
depuration plants
production areas
storage tanks
safety basins
channels
airports
road joints
car parks
terraces and floor slabs ■
tiled surfaces •
external use
external courtyards
swimming pools •
cracks and splits • •
fillets between different materials ■ ■ ■ ■ ■ ■
roofs and coverings
metalwork
sealing
ventilated façades
façade joints ■
refractory grout •
high temperatures joints • •
fire-break joints •
fillets for glass/window and door wares • ■ •
fillets for window and door wares/wall encasements ■ ■ ■
structural joints
cracks and splits • • ■
joints in industrial floors
joints in civil floors •
• •
internal use
signposts
bird deterrents
bathroom accessories •
tiles •
beading •
cable runs •
skirting boards •
heavy objects
rapid bonding
254 * = ULTRABOND SUPER GRIP is a product for internal use only •= Ideal ■ = Suggested
ponent 1-component 2-component 2-component 1-component neutral 1-component hybrid
of other polyurethane sealants epoxy-polyurethane sealants modified polyurethane sealants silicone sealants sealants
ations
Ultrabond MS Rapid
Mapeflex Blackfill
Mapeflex PU50 SL
Mapeflex MS45
Mapeflex PB27
Mapeflex PB25
Mapeflex PU40
Mapeflex PU45
Mapeflex PU21
Mapeflex PU20
Mapeflex PU30
Mapeflex PU65
Mapesil BM
Mapesil LM
• • ■ ■
■ • • ■ ■
■ • • • • ■
■ ■ ■ • • • • ■
■ ■ ■ • • ■
• •
■ •
■ • ■ ■ • ■ ■
• ■ • ■ • •
■ ■ ■ ■ ■
■ • ■ • • ■ •
• • • ■ ■ •
■ ■ • ■ • •
• ■ • ■
• ■ • ■
■ • ■ • •
• ■ • ■
■
■ • ■ • •
• ■ ■ ■ ■ ■ ■ ■ ■ • ■
■ • ■ •
■ • ■ • ■ ■ •
■ • ■ ■ ■ ■ ■ •
•
•
•
■ ■ •
•
■
■ • ■ • •
■ • •
• • •
• • •
• • •
• • •
• • •
• • •
• • •
• • •
• • •
• • •
• • •
• • •
• • •
• • •
•
•
255
SELECTION CHARTS
WATERPROOFING
vertical surfaces
Cross-members
Horizontal and
Drains
Joints
Fillets
BATHROOMS and DAMP ENVIRONMENTS
Mapelastic •
Mapelastic Smart •
Mapelastic AquaDefense •
Mapegum WPS •
Monolastic •
Mapeband • • •
Mapeband PE 120 • • •
Drain Lateral •
Drain Vertical •
SWIMMING POOLS
Mapelastic •
Mapelastic Smart •
Mapeproof Swell •
Mapeband • •
Mapeband TPE •
Drain Vertical •
BALCONIES and TERRACES
Aquaflex Roof* •
Aquaflex Roof HR* •
Mapelastic •
Mapelastic Smart •
Mapelastic AquaDefense •
Monolastic •
Mapenet 150 •
Mapetex Sel •
Mapeband • •
Mapeband TPE •
Mapeproof Swell •
Drain Lateral •
Drain Vertical •
Drain Front •
256 * = Exposed waterproofing layers
walls with negative lift
Reinforced concrete
Construction joint
Brick walls with
Through bodies
Post-cast walls
Structural joint
Pre-cast walls
negative lift
Pile heads
Lift shaft
Plateau
UNDERGROUND STRUCTURES
Mapeproof • • • • •
Mapeproof LW • • • • •
Mapeproof Mastic • •
Mapeproof Swell • • • •
Idrostop • • •
Idrostop B25 • • • •
Idrostop Soft • • • •
Mapeband • •
Mapeband TPE •
Idrostop PVC BI-BE •
Idrosilex •
Idrosilex Pronto • • • •
Mapelastic Foundation • • • •
Lamposilex • • • •
Resfoam 1KM • • • •
Plastimul •
Plastimul 1K Super Plus •
Plastimul 2K Plus •
Plastimul 2K Super •
• After carrying out the render with PLANITOP HDM MAXI. 257
SELECTION CHARTS
Mape-Antique MC
Mape-Antique CC
Mape-Antique FC
Mape-Antique FC
Mape-Antique FC
Fine-grained texture plaster
Mape-Antique LC
Super-fluid injection slurry
Struturale NHL
Mape-Antique
Mape-Antique
Mape-Antique
Mape-Antique
Coarse texture plaster
Intonaco NHL
Dehumidifying render
Dehumidifying render
Dehumidifying render
Allettamento
Scratch-coat mortar
Transpirant render
Binder for mortar
Structural render
Macchina
Ultrafine
Rinzaffo
Ideal
Grosso
Civile
Possible
PROBLEMS
Consolidating “cement-core” walls and
masonry in general where there are internal
cracks, gaps and cavities by injection
Dehumidifying render
Transpirant render
Before applying dehumidifying render (made from MAPE-ANTIQUE LC mixed with aggregates, MAPE-ANTIQUE CC, MAPE-ANTIQUE MC or MAPE-ANTIQUE MC MACCHINA, aalways apply a layer
258 of MAPE-ANTIQUE RINZAFFO, around 5 mm thick.
259
Mapei Group
Europe
AUSTRIA - Mapei GmbH GREAT BRITAIN - Mapei U.K. Ltd SLOVAK REPUBLIC - Mapei SK sro
Fräuleinmühle 2 Mapei House - Steel Park Road - Nádražná 39, 900 28 Ivanka pri Dunaji
A - 3134 Nußdorf ob der Traisen Halesowen - West Midlands B62 8HD Tel. +421-2-4020 4511
Tel. +43-2783-8891 - Fax +43-2783-8893 Tel. +44-121-5086970 Fax +421-2-4020 4523
Internet: http://www.mapei.at Fax +44-121-5086960 Internet: http://www.mapei.sk
E-mail: office@mapei.at Internet: http://www.mapei.co.uk E-mail: office@mapei.sk
Plant in Nußdorf ob der Traisen E-mail: sales@mapei.co.uk
Distribution centres in Wien, Plant in Halesowen
Hall in Tirol and Graz SLOVENIA - Mapei doo
Kočevarjeva 2 - 8000 Novo Mesto
GREECE - Mapei Hellas SA Tel. +386-1-7865050/51
BELGIUM - LUXEMBOURG P.O. Box 19243 - 34100 Chalkida Fax +386-1-7865055
Mapei Benelux SA/NV Tel. +30-22620-71906 Internet: http://www.mapei.si
Zoning Industriel - Rue de l’Avenir, 40 Fax +30-22620-71907 E-mail: mapei@mapei.si
B - 4460 Grâce-Hollogne Internet: http://www.mapei.gr Distribution centre in Grosuplje
Tel. +32-4-2397070 - Fax +32-4-2397071 E-mail: mapeihellas@mapei.gr
Internet: http://www.mapei.be Plant in Ritsona Representative office in
E-mail: mapei@mapei.be Serbia (Belgrado):
Tel. +381-11-3474-694
HUNGARY - Mapei Kft Fax +381-11-3474-695
BULGARIA Sport utca 2. - 2040 Budaörs
Mapei Bulgaria LTD Tel. +36-23-501667 - Fax +36-23-501666
Business Park Mladost 4 Internet: http://www.mapei.hu SPAIN - Ibermapei SA
Building 8A, floor 6 - 1766 Sofia, Bulgaria E-mail: mapei@mapei.hu C/Valencia 11 - Pol. Ind. Can Oller
Tel. +359 (2) 4899775 - Fax +359 (2) 4898723 Plant in Sóskút 08130 Santa Perpetua de Mogoda
Internet: http://www.mapei.bg (Barcelona)
Plant in Ruse Tel. +34-93-3435050
NORWAY - Mapei AS Fax +34-93-3024229
Vallsetvegen 6 - 2120 Sagstua Internet: http://www.mapei.es
CROATIA - Mapei Croatia d.o.o. Tel. +47-62-972000 - Fax +47-62-972099 E-mail: ibermapei@ibermapei.es
Purgarija 14 - Kerestinec Internet: http://www.mapei.no Plants in Amposta (Tarragona) and
10431 Sveta Nedelja E-mail: post@mapei.no Cabanillas del Campo (Guadalajara)
Tel. +385-1-3647789 - Fax +385-1-3647787 Plant in Sagstua Distribution centres in Badalona
Internet: http://www.mapei.hr (Barcelona), Onda (Castellón) and
E-mail: mapei@mapei.hr Marratxi (Mallorca)
POLAND - Mapei Polska Sp.z o.o.
ul. Gustawa Eiffel’a 14,
CZECH REPUBLIC 44-109 Gliwice SWEDEN - Mapei AB
Mapei spol. s r.o. Tel. +48-32-7754450 - Fax +48-32-7754471 Smidesvägen 10, 6 tr.
Smetanova 192 - 77211 Olomouc Sales office: 17141 Solna
Tel. +420-585224580 ul. Chałubińskiego 8, Tel. +46-8-52509080
Fax +420-585227209 00-613 Warszawa Internet: http://www.mapei.se
Internet: http://www.mapei.cz Tel. +48-22-5954200 - Fax +48-22-5954202 E-mail: info@mapei.se
E-mail: info@mapei.cz Internet: http://www.mapei.pl
Distribution centre in Prague E-mail: info@mapei.pl
Plant in Gliwice and Barcin SWITZERLAND - Mapei Suisse SA
1642 Sorens / FR
DENMARK - Mapei Denmark A/S Tel. +41-26-9159000
Falkoner Allé 7,4 PORTUGAL - Lusomapei S.A. Fax +41-26-9159003
2000 Fredriksberg Business Parque Tejo XXI Internet: http://www.mapei.ch
Tel. +45-69 60 74 80 Estrada Nacional 1 - Km 29, Gelfas E-mail: info@mapei.ch
Fax +45-69 60 74 89 2600-659 Castanheira do Ribatejo Plant in Sorens
Internet: http://www.mapei.dk Tel. +351 263 860 360
E-mail: post@mapei.dk Fax +351 263 860 369
Internet: http://www.mapei.pt THE NETHERLANDS
E-mail: geral@mapei.pt Mapei Nederland B.V.
FRANCE - Mapei France SA Plant in Anadia Twentepoort Oost 27
Zone Industrielle du Terroir 7609 RG Almelo
Avenue Léon Jouhaux, 29 Tel. +31-546-836040
31140 Saint Alban ROMANIA - Mapei Romania SRL Fax +31-546-836044
Tel. +33-5-61357305 14 Gen. Ion Dragalina Str. Internet: http://www.mapei.nl
Fax +33-5-61357314 Sector 5 - Bucarest E-mail: verkoop@mapei.nl
Internet: http://www.mapei.fr Tel. +40-21-3117819
E-mail: mapei@mapei.fr Fax +40-21-3117821
Plants in Saint Alban, Montgru Saint Internet: http://www.mapei.ro UKRAINE - Mapei Ukraine LLC
Hilaire and Saint Vulbas E-mail: info@mapei.ro 02002, Kiev
13. M. Raskovoy, 5th floor
Tel. +38-044-221-15-01, 221-15-02
GERMANY - Mapei GmbH RUSSIAN FEDERATION - ZAO Mapei Fax +38-044-393-14-52
Bahnhofsplatz 10 - 63906 Erlenbach Derbenevskaya nab., 7, building 4, 3-d floor Internet: http://www.mapei.ua
Tel. +49-9372-98950 Moscow 115114 Russian Federation E-mail: office@mapei.ua
Fax +49-9372-989548 Tel. +7-495-258-5520 - Fax +7-495-258-5521 Distribution centres in Zazimje village, 6,
Internet: http://www.mapei.de Internet: http://www.mapei.ru Radgospana str.
E-mail: mailto@mapei.de E-mail: info@mapei.ru
Plant in Weferlingen Plant in Stupino
HEAD OFFICE PLANTS Office in Rome
• Strada Provinciale 159 - Viale Libano, 28 - 00144 Rome
MAPEI SpA 20060 Robbiano di Mediglia (Milan) Tel. +39-06-5929211 - Fax +39-06-59290337
Tel. +39-02-906911 - Fax +39-02-90660575
Via Cafiero, 22
• Via Mediana S.S. 148 km 81,3 - 04100 Latina
20158 Milan (Italy) Tel. +39-0773-2548 - Fax +39-0773-250391
Tel. +39-02-37673.1 Office in Lecce
Fax +39-02-37673.214 DISTRIBUTION CENTRE Via Adriatica, 2 B (angolo viale Porta d’Europa)
SASSUOLO 73100 Lecce
http:// www.mapei.com Via Valle D’Aosta, 46 - 41049 Sassuolo (Modena) Tel. +39-0832-246551 - Fax +39-0832-248472
E-mail: mapei@mapei.it Tel. +39-0536-803116 - Fax +39-0536-805255 E-mail: ufficio.lecce@mapei.it
SINGAPORE - Mapei Far East Pte Ltd CANADA - Mapei Canada Inc.
CHINA - Mapei Construction Materials 28, Tuas West Road 2900 Francis-Hughes Avenue
(Guangzhou) co. Ltd. Singapore 638383 Laval, QC H7L 3J5
Contact address: Room 2003-4, Tel. +65-68623488 Tel. +1-450-662-1212
Hong Fu Loi International Building, Fax +65-68621012 / 68621013 Fax +1-450-662-0444
No. 313, Yan Jiang Zhong Road, Internet: http://www.mapei.com.sg Internet: http://www.mapei.com
Guangzhou, China 510110 E-mail: mapei@mapei.com.sg Plant in Vancouver (BC), Laval (QC),
Tel. (86-20) 8365 3489 Plant in Singapore Maskinongé (QC), Brampton (ON)
Fax (86-20) 8365 3481 Distribution centre in Calgary (AB)
Internet: http://www.mapei.com.cn
Email: mapei-gz@mapei.com.cn UNITED ARAB EMIRATES
Plant in Conghua (Guangzhou) IBS (Innovative Building Solutions) L.L.C MESSICO
Building No. 5 - 2nd Floor Mapei de Mexico, S.A. DE C.V.
CHINA - Mapei Construction Materials Green Community, Dubai Investment Park Pirineos 515, Bodega 45
(Shanghai) co. Ltd. P.O. Box 73869, Dubai, UAE Microparque Santiago
No. 6, Lane 8999, Hunan Road, Tel: +971 04 8156666 Zona Ind. Benito Juarez
Pudong New District, Fax: +971 04 8156655 Queretaro, Qro. CP 76128
Shanghai, China 201314 Internet: http://www.mapei.ae Tel. 0-1-800-696-2734
Tel. (86-21) 5818 0808 E-mail: info@ibs-mapei.ae Fax (442) 209-5024
Fax (86-21) 5818 0909 Plant in Dubai Internet: http://www.mapei.com
Internet: http://www.mapei.com.cn E-mail: rashjr@mapei.com
E-mail: mapei-sh@mapei.com.cn
Plant in Pudong New District (Shanghai) VIETNAM - Mapei Vietnam Ltd.
Plot 8, Street No. 4, PANAMA - Mapei Construction
HONG KONG S.A.R. Northern Part of Chu Lai I.Z. Chemicals Panama S.A.
Mapei China Ltd Tam Hiep Commune, Nui Thanh District, Via Transistmica, Complejo
9/F, Linkchart Centre, 2 Tai Yip Street, Quang Nam Province - Vietnam Bodegas America - Panama City
Kwun Tong, Kowloon, Hong Kong Tel. (84-510) 3565 801-7 Tel./Fax +507 261 9549-50
Tel. +852-21486816 Fax (84-510) 3565 800 Internet: http://www.mapei.com
Fax +852-25121328 Internet: http://www.mapei.vn E-mail: mapeipanama@mapei.com.pa
Internet: http://www.mapei.com.hk E-mail: mapeihn@mapei.com.vn Plant in Panama City
E-mail: mapei@mapei.com.hk
Branch in Hanoi Capital:
Tel. (84-4) 3928 7924-6 PUERTO RICO - Mapei Caribe Inc.
INDIA - Mapei Construction Products Fax (84-4) 3824 8645 Road 2 km 26.2 BO. Espinosa
India Private Limited E-mail: mapeihn@mapei.com.vn Dorado, Puerto Rico 00646
# 402, 3rd Floor, Tudor Court Branch in Danang City: Tel. (787) 270-4162
No. 40, Lavelle Road, Bangalore - 560 001 Tel. (84-511) 3565 001-4 Fax (787) 883-1669
Tel. +91 80 2222 1820, 2222 1840 Fax (84-511) 3562 976 Internet: http://www.mapei.com
Fax +91 80 2222 1810 E-mail: mapeidn@mapei.com.vn Plant in Dorado
Internet: www.mapei.com
E-mail: m.sarkar@mapei.co.in Branch in Ho Chi Minh City:
Plant in Bangalore Tel. (84-8) 3512 1045 or 3899 2845 U.S.A. - Mapei Corporation
Fax (84-8) 3899 2842 1144 East Newport Center Drive
E-mail: mapeihcm@mapei.com.vn Deerfield Beach, Florida 33442
KOREA - Mapei Korea Ltd. Plant in Chu Lai (Quang Nam Province) Tel. +1-954-246-8888 / +1-888-300-4422
121-270, 14th floor, Hansol Gyoyuk Bldg, Fax +1-954-246-8800
Iaan Sangam 2 danji Internet: http://www.mapei.com
1653 Sangam-dong, Mapo-gu, Seoul Plants in Tempe (AZ), Garland (TX),
Tel. +82-2-6393-2300 South River (NJ), Fort Lauderdale (FL),
Fax. +82-2-6393-2323 West Chicago (IL), Fredericksburg (VA),
Internet: http://www.mapei.co.kr San Bernardino (CA), Dalton (GA)
E-mail: joon.lee@mapei.co.kr
Plant in Jincheon (Chungcheongbuk-do) Africa VENEZUELA
Mapei de Venezuela CA
MALAYSIA SOUTH-AFRICA Calle Orinoco Torre D&D PB Lc 11-12
Mapei Malaysia Sdn Bhd Mapei South Africa (Pty) Ltd Urb. Las Mercedes - 1071 Caracas
PT521, Batu 23 Unit 2C, Anchor Industrial Park Tel. +58-212-991-1797/+58-212-991-9423
Jln Rawang/Jln Batang Berjuntai C/o Springbok and Taljaard Road Fax +58-212-991-7623
48000 Rawang - Selangor Darul Ehsan Bartlett, Johannesburg, South Africa Internet: http://www.mapei.com
Tel. +603-60935799 Tel. +27-11-5528476 E-mail: mapeivenezuela@hotmail.com
Fax +603-60915801 Fax +27-11-5528449 Plant in Cagua Estado Aragua
Internet: http://www.mapei.com.my Internet: http://www.mapei.co.za
E-mail: mapei@mapei.com.my E-mail: info@mapei.co.za
Plant in Rawang (Selangor Darul Ehsan) Plant in Bartlett
GENERAL CATALOGUE JANUARY 2013
GENERAL JANUARY
CATALOGUE
2013
HEAD OFFICE
MAPEI S.p.A.
Via Cafiero, 22 - 20158 Milan
Tel. +39-02-37673.1
Fax +39-02-37673.214
Internet: www.mapei.com
E-mail: mapei@mapei.it
C.P. MK 670030 - (GB) 1/2013