Professional Documents
Culture Documents
Fact/2TJM/Rev 0/0905
#98, Sipcot Industrial Complex, #17/3 Arakere, armature type and primarily designed for use with I.D.M.T.L.
Hosur 635 126, India. Bannerghatta Road,
Tel: +91 4344 501600-602 Bangalore-560 076, India. relays. The overcurrent setting is continuously variable by means
Fax: +91 4344 276397 Tel: +91 80 26581023 / 3268 of the callibrated cam. This element may be ‘locked out’ by
Fax: +91 80 26580642 advancing the setting adjuster to its extremity, i.e. past the highest
SWITCHGEAR WORKS Email: blrworks@easunreyrolle.net
Ernavur, fault setting. The flag indicator shows on operation and is hand
Chennai-600 057, India. AUTOMATION DIVISION EXPORTS DIVISION
“Ashirwad”, #25, 29th Main, #17/3 Arakere, reset by a push fitted in the relay cover.
Tel: +91 44 25733715
Fax: +91 44 25733468 4th B Cross, BTM Layout 2nd Stage, Bannerghatta Road,
Email: switchgear@easunreyrolle.net Bangalore-560 076, India. Bangalore-560 076, India. 2TJM12
Tel: +91 80 26685496 Tel: +91 80 26581023 / 3268
Fax: +91 80 26580642 This relay comprises the I.D.M.T.L. element previously described
Fax: +91 80 26685446 Email: exports@easunreyrolle.net and a directional element type ‘ES’. The elements are vertically
Email: smabp@easunreyrolle.net
mounted on a mild steel back-plate with the directional element
Sales Offices in the upper position; the composite relay is then housed in a
Mumbai Delhi Kolkata 11/2 pole vertical case. Type 2TJM10 Single Pole Relay
Tel: +91 22 22855415 Tel: +91 11 25747321 Tel: +91 33 22848320
Fax: +91 22 22825703 Fax: +91 11 25747320 Fax: +91 33 22848326 The directional element operates on the induction wattmeter
Fig.8 : Current /Phase Angle Diagram
Email: mumbai@easunreyrolle.net Email: delhi@easunreyrolle.net Email: kolkata@easunreyrolle.net
Bangalore Chennai Secunderbad
Tel: +91 80 26685496 Tel: +91 44 24346425 Telefax: +91 40 27817847
Fax: +91 22 26685446 Fax: +91 44 24346435 Email: hyderabad@easunreyrolle.net Corporate Office
Email: blroffice@easunreyrolle.net Email: chennai@easunreyrolle.net Easun Reyrolle Limited. 98 Sipcot Industrial Complex
Bhopal Hosur 635 126 India. Tel: +91 4344 501600-602
Telefax: +91 755 2684221 Fax: +91 4344 276397
Email: bhopal@easunreyrolle.net www.easunreyrolle.com
Phase-fault Relays: 45 degree Lead Power Factor Characteristic: Short term overload (2TJM10 for 1.8 sec)
Relays supplied with the 45 degree lead power factor AC 2TJM range
characteristic utilise the 90 degree connection, i.e.relays Nominal
monitoring A-phase current are polarised by B-C voltage, thus Burden
the relay develops maximum torque with a 45 degree lagging 5A IDMT 2.5A to 10A 50 x setting – max of 250 A
fault current. element 1A to 4A 50 x setting
0.5 to 2A 50 x setting – max of 50 A
Earth-fault Relays: Earth-fault relays are normally supplied with 1A IDMT 0.5A to 2A 50 x setting – max of 50 A
12 ½ degree lagging power factor characteristic. The current 0.2A to 0.8A 50 x setting
coil is connected in the residual circuit of the line current 0.1A to 0.4A 50 x setting
transformers and the voltage coil in the open delta tertiary
winding of the line voltage transformer, the voltage coil being
Burden
3 VA at current setting Fig. 3. Directional Flamed Type ES
suitable for 190V and 63.5V on resistance and solidly earthed Fig. 2. High-Set element MCAA
systems respectively. Output Contacts
2 normally open self-reset Phase – Angle Settings
Directional earth fault relays with a 45 lagging power factor
Time Settings Phase Fault : 450 leading
Carry continuously – 5A AC or DC
characteristics are used in highly inductive earthing systems. Time Multiplier : 0.1 to 1.0 continuously Earth-fault : 12 1/20 lagging, 450 lagging
Adjustable with 0.05 Make & carry
The characteristic is achieved in the relay with a RC circuit in the Operating Time
Calibration Markings 20A AC or DC for 0.5 secs.
ES element. (Limit L/R = 50ms and 300 V) 100 ms of rated current setting with 100% volts applied
Operating Time : See Fig.7 for time/current characteristics.
Indication Burden
Current Windings : 0.5 VA at setting
Features Accuracy Reference Conditions Hand-Reset flag
Voltage Windings : 12 VA at rated voltage (110V)
• No standing drain on substation battery supplies General IEC 60255-4 2TJM11
• Easy to test and maintain Characteristics and Vector Diagrams
Current settings 100% of In for O/C, As type 2TJM10 with the following additions referring to the Vector diagrams (using A phase) : Fig.6
• Extremely long service life 40% of In for E/F high-set element: Current/phase angle diagram : Fig.8
• Designed to comply with IEC 60255 specifications (where Time Multiplier 1.0 Current Settings Impedence/current characteristics (1A relay) : Fig.9 Fig. 5 : 900 Connection Diagram : 450 C leading Power Factor Relay
applicable) Reference Tap M1=2 Impedence/current characteristics (5A relay) : Fig.10
Rating 1A Rating 2A Rating 5A
The 2TJM range is as follows: Reference Multiple 10xIs 0.4-1.6A 2-8A Cases
• 2TJM 10 Normal inverse IDMT form 3/10 (3 secs for 10 2-8A 10-40A 2TJM10 & 11 - Single pole – 2/3V, 1V; 3 pole – 2V, 2VH, 3H
Accuracy 4-16A 8-32A 20-80A 2TJM12 - 11/2V
times current) 8-32A 40-160A
• 2TJM 11 IDMT + highest element Operating Times 10-40A 50-200A Ordering Information
• 2TJM 12 Directional IDMT Operating current multiple of % (a) TYPES 2TJM10
Operating Time
• 2TJM 16 Directional IDMT + Highest element Plug setting At 2 times setting : 20ms 1. Type
2 ±7.5 At 5 times setting : 12ms 2. Rating
5 ±7.5 3. Setting range
Technical Information 10 ±7.5 Burden 4. Case size
2TJM10 20 ±7.5
1.2VA over the setting range (b) TYPE 2TJM11
Rating The allowable variation in operating time not expressed as Contacts Same as for 2TJM10 plus high-set element setting range.
0.5A 1A, 2A or 5A less than 100 ms. Arrangement : 2 make, self-reset, (c) TYPE 2TJM12
Rating : 10A continuously, 30A for Same as for 2TJM10 plus phase angle setting.
System Frequency: Accuracy General 3 seconds
50HZ Overshoot time <80ms
Indication
Current Settings Accuracy Influencing Factors Hand Reset flag
Setting Range StepA Rating in (A) Temperature
0.05-0.2 0.025 0.5 1 - - Ambient Range -250C to +550C
2TJM12
As type 2TJM10 with the following additions refering to the
0.1-0.4 0.05 0.5 1 2 - Variation over range 0.2%/0C directional element.
0.2-0.8 0.1 - 1 2 -
At reference tap setting and 10 x setting Rating Vn
0.25-1 0.125 0.5 - - 5
Frequency Overcurrent : 110V nominal
0.4-1.6 0.2 - - 2 -
Range 47Hz to 51Hz Earthfault : 63.5V or 110V nominal
0.5-2 0.25 - 1 - 5
Operating time variation +9% to –4% Current Settings
1-4 0.5 - - 2 5
At reference frequency (Expressed as a percentage of IDMT nominal current)
2.5-10 1.25 - - - 5 Overcurrent : 15% at MTA (Maximum
Thermal Withstand Fig. 6 : Vector diagrams : Type 2TJM12 Directional Element
Pick-up current : Not greater than 130% of plug-setting torque angle)
Continuous Overload Earth Fault : 7.5% at MTA
Reset current : Not less than 95% of plug-setting.
IDMT Element 2.0 x ls Fig. 4 : Directional Element : Electro-magnetic system