Professional Documents
Culture Documents
Mountinginstruction/安装说明书
IP 66 IK 08 8-12m
W L
1.First switch off main supply and then replace broken glass.
先切断电源,再更换破碎玻璃
2.First switch off main supply and then replace damaged gear unit or LED modules
先切断电源,再更换损坏的电器组件或LED模块
3.Application temperature
使用环境温度:-40~55℃
1.
5~15°
2.
灯具安装角度:5-15度 1. 按住上盖。
灯具安装杆径:48-60mm Press the cover.
Installationangle: 5-15degree 2. 按箭头方向旋转旋钮打开电源箱盖。
Polediameter: 48-60mm Rotate the knob to open the cover.
30
3 Notice: Correct connection for polarities 7
! 注意: 正确的极性连接 L
Ø10-12
1. 旋开螺帽, 去掉前端密封堵头, 保留
橡胶衬套。插入线缆, 确保橡胶衬套
不掉出, 然后旋紧螺帽。
Loosen the cap, then remove the front
plug, should keep the rubber lining in.
Insert the cable in and ensure the inner
sealing tube not fall off, then fasten the
cap.
2. 将3路接头与外部电缆连接
Connect the connector with input cable
4
1. 推开左侧和右侧两个弹片, 取出电器底板。
Push the 2 clips to take out the gear plate.
2. 更换电器底板组件。
Replace the failed components.
操作前请务必关闭电源。
! Switch off power before operation.