Professional Documents
Culture Documents
Cat. No. FTA1100 followed by E, followed by L or N, followed by 12 or 24, followed by N or P, with or without modification or optional suffix
letters.
Diesel Engine Controller, Model FTA1100 followed by -J, followed by L or N, followed by 12 or 24, followed by P or N.
Air Start Engine Controller, Model FTA1100 followed by -JR, followed by 12 or 24, followed by L or N, followed by P or N.
Manual controller-wound rotor type, Cat. No. FTA-1750 followed by A, B, C, D, E, F, G, H, J or K, followed by 15-400, followed by A, B, C, F or H,
followed by additional suffixes.
Manual controllers, Cat. Nos. FTA1000 (across the line), FTA1250 (part winding*), FTA1300, (wye-delta open transition*), FTA1350 (wye-delta closed
transition*), FTA1500 (primary resistor*), FTA1800 (autotransformer*) and FTA1900 or FTA1930 (electronic soft start*), followed C, followed by D, E,
F, G, K, M, N, P, Q, or R, followed by 2 or 3 digit number 15 to 700, followed by A, AZ, B, BZ, C, F, FZ, H or HH, , may be followed by additional
suffixes. (*Emergency manual operator provides full voltage across the line starting).
Automatic controllers, Cat. Nos. FTA1000 (across the line), FTA1250 (part winding*), FTA1300 (wye-delta open transition*), FTA1350 (wye-delta
closed transition*), FTA1500 (primary resistor*), FTA1800 (autotransformer*) and FTA1900 or FTA1930 (electronic soft start*), followed by A or B,
followed by D, E, F, G or K, M, N, P, Q or R, followed by 2 or 3 digit number 15 to 700, followed by A, AZ, B, BZ, C, F, FZ, H or HH, may be followed
by additional suffixes. (*Emergency manual operator provides full voltage across the line starting).
Variable Speed Pressure Limiting Fire Pump Controllers Cat. No. FTA followed by 3100, 3110, 3120, 3130, followed by A, B or C, followed by M, N,
P, Q or R, followed by two or three numbers from 15 to 400 followed by A, AZ, B, BZ, C, F, FZ, H or HH, maybe followed by additional suffixes.
Controllers are suitable for use as service equipment on circuits capable of delivering high fault currents: maximum ratings are 42,000 amps at
200-600 v (D), 200,000 aperes at 200-600 v (E, F, G) or 200,000 amps at 200-600 v (K) with current limiting (K).
Variable Speed Pressure Limiting Fire Pump Controllers Cat. Nos. FTA followed by 3100M, 3110M, 3130M followed by A, B or C, followed by M, N,
P, Q or R, followed by two or three numbers from 15 to 500 followed by A, AZ, B, BZ, C, F, FZ, H or HH, maybe followed by additional suffixes.
Controllers rated 15-250 hp, 200-800 v (H); 15-300 hp, 220-240 v (A), 15-500 hp, 380-415 v (F); 15-600 hp, 440-480 v (B); and 15-700 hp, 550-600 v
(C), three-phase, 50/60 hz (cps).
Controllers may be provided with a power transfer switch compartment, Cat. Nos. FTA900 (generator alternate source) or FTA901 (generator
alternate source with bypass-isolation switch, followed by BL or Cat. Nos FTA950 (utility alternate source) or FTA951 (utility alternate source with
bypass-isolation switch), followed by B, followed by D, E, F, G or K; either catalog number followed by 100, 150, 260, 400, 600, 800 or 1000 (amp
rating) followed by A, B, C, F or H, may be followed by additional suffixes. Fault current rating on normal side is same as fire pump controller. Fault
current rating on emergency side is dependent upon the external circuit breaker (FTA900, FTA901) or the same as the fire pump controller rating
D, E, F, G or K (FTA950, FTA951).
Foam concentrate fire pump controller, Cat. No. FTA followed by 1000, 1250, 1300, 1350, 1500, 1800 or 1900, followed by A, B or C, followed by D,
E, F, G, K, M, N, P, Q or R, followed by 03 through 700, followed by A, AZ, B, BZ, C, F, FZ, H or HZ, may be followed by KL or LL.
The above foam concentrate fire pump controllers may be provided with transfer switch assembly, Cat. Nos. FTA900, FTA901, FTA950 or FTA951,
followed by suffix letters and numbers.
https://iq.ulprospector.com/en/profile?e=260268 1/5
11/12/2019 PUMP CONTROLLERS, FIRE | UL Product iQ
All of the above controllers are suitable for use on circuits capable of delivering high fault currents. The withstand ratings are as follows:
600 22,000
switches
Those controllers provided with transfer switches have withstand ratings on the normal side equal to those shown above at 240 and 480 v. The
emergency side of the transfer switch, if protected by an additional circuit located within the controller, has withstand ratings shown above at 240
and 480 v. If the circuit breaker protecting the emergency side is not supplied with the controller, the withstand rating for the emergency side will
be dependent upon the ratings of the transfer switch and external circuit breaker provided.
Foam concentrate fire pump controller, Cat. Nos. FTA-740 or FTA-750 followed by A, B or C, followed by A, B or H, followed by 10 or 30, followed
by A, B, C, E, F, H or T, followed by **, LK, LKA, LL or LLA. The above foam concentrate controllers may be provided with transfer switch assembly.
Cat. Nos. FTA-975 or FTA-976 followed by suffix letters and numbers.
All of the above controllers are suitable for use on circuits capable of delivering high fault currents. The withstand ratings are as follows:
limiting device)
Above limited service controllers may be provided with transfer switch assembly, Cat. Nos. FTA-975 or FTA-976; followed by suffix letters and
numbers.
https://iq.ulprospector.com/en/profile?e=260268 2/5
11/12/2019 PUMP CONTROLLERS, FIRE | UL Product iQ
limiters - All HP
Cat. No. FTA-975 transfer switch assembly has the following short circuit rating:
Short Circuit
Molded Case Max Current + RMS
Switch Rated V Symmetrical A
Cat. No. FTA-976 transfer switch assembly has the following short circuit rating:
Cat. No. FTA, followed by 1000, 1250, 1300, 1350, 1500, 1800 or 1900, followed by A, B or C, followed by M, N, P, Q or R, followed by two or three
numbers from 03 to 700, followed by A, AZ, B, BZ, C, F, FZ, H or HZ, may be followed by additional suffixes.
Cat. Nos. FTA900A or FTA901A, followed by L or M, followed by three or four digit number 100 to 1000, followed by A, AZ, B, BZ, C, F, FZ, H or HZ,
may be followed by additional suffixes.
Cat. Nos. FTA950A or FTA951A, followed by A, AZ, B, BZ, C, F, FZ, H or HZ, may be followed by additional suffixes; Model AS-2001.
Remote alarm panels for use with this manufacturer's controllers - Cat. Nos. FTA-200A, FTA-B, FTA-F and FTA-G.
https://iq.ulprospector.com/en/profile?e=260268 3/5
11/12/2019 PUMP CONTROLLERS, FIRE | UL Product iQ
Fire pump controllers, Cat. No. FTA-1750 followed by C, followed by M, N, P, Q or R, followed by 15-400, followed by A, AZ, B, BZ, C, F, FZ, H or HH,
followed by additional suffixes.
Stand alone automatic power transfer switches, Cat. No. FTA902A, followed by L, followed by three or four digit number 100 to 1000 incl.,
followed by A, AZ, B, BZ, C, F, FZ, H or HH, followed by a two or three digit number from 03 to 700 incl., followed by HP, may be followed by
additional suffixes.
Cat. Nos. FTA903A, FTA952A or FTA953A, followed by M, N, P, Q or R, followed by three or four digit number 100 to 1000 incl., followed by A, AZ,
B, BZ, C, F, FZ, H or HH, followed by a two or three digit number from 03 to 700 incl., followed by HP, ay be followed by additional suffixes.
Cat. No. FTA followed by 750, followed by A, B or C, followed by D or E, followed by two numbers from 03 to 30, followed by A, AZ, B, BZ, C, F, FZ,
H or HH, may be followed by additional suffixes.
Cat. No. FTA followed by 740, followed by A, B or C, followed by D or E, followed by two numbers from 03 to 15, followed by E, EZ, T or TT, may be
followed by additional suffixes.
Cat. No. FTA followed by 975 or 976, followed by A followed by L, D or E, followed by two numbers from 100 to 150, followed by A, AZ, B, BZ, C, F,
FZ, H or HH, may be followed by additional suffixes.
These controllers are suitable for use on circuits capable of delivering high fault currents. The withstand ratings are determined by the circuit
breaker used except for those controllers provided with transfer switches in which case the ratings are determined by the circuit breaker and
transfer switch.
Withstand ratings of the controller are dependent upon the circuit breaker as indicated below:
https://iq.ulprospector.com/en/profile?e=260268 4/5
11/12/2019 PUMP CONTROLLERS, FIRE | UL Product iQ
The above ratings also apply to the normal side of the transfer switch. They also apply to the emergency side when it is protected by a circuit
breaker of the same type. If the emergency side is not protected by an additional circuit breaker within the power transfer switch compartment,
the following ratings apply to the emergency side. The external circuit breaker must have an interrupting rating at least equal to those shown.
The appearance of a company's name or product in this database does not in itself assure that products so identified have been manufactured
under UL's Follow-Up Service. Only those products bearing the UL Mark should be considered to be Certified and covered under UL's Follow-Up
Service. Always look for the Mark on the product.
UL permits the reproduction of the material contained in the Online Certification Directory subject to the following conditions: 1. The Guide
Information, Assemblies, Constructions, Designs, Systems, and/or Certifications (files) must be presented in their entirety and in a non-misleading
manner, without any manipulation of the data (or drawings). 2. The statement "Reprinted from the Online Certifications Directory with permission
from UL" must appear adjacent to the extracted material. In addition, the reprinted material must include a copyright notice in the following
format: "© 2019 UL LLC"
https://iq.ulprospector.com/en/profile?e=260268 5/5