Professional Documents
Culture Documents
College of Engineering
Submitted by:
Janray S. Rabaya
Submitted to:
Engr. King Howard A. Maneclang
CHAPTER 1 Stress
Sample Problems
1.) The homogeneous bar
AB weighing 1800 lb. is
supported at either end
by a steel cable.
Calculate the smallest
safe area of each cable
if the working stress is
18 000 psi for steel.
Solution:
Solution:
3.) The uniform 300-lb bar AB
carries a 500-lb vertical force
at A. The bar is supported by a
pin at B and the 0:5-in.
diameter cable CD. Find the
stress in the cable.
Solution:
CHAPTER 2 Strain
Sample Problems
1.) The rigid bar AB
is supported by two
rods made of the same
material. If the bar
is horizontal before
the load P is
applied, find the distance x that locates the
position where P must act if the bar is to remain
horizontal. Neglect the weight of bar AB.
Solution:
Solution:
CHAPTER 3 Torsion
Sample Problems
1.) The steel shaft, 3 ft
long and 4 in. in diameter,
carries the end torque of
15 kip _ ft. Determine (a)
the maximum shear stress in
the shaft; and (b) the
angle of twist of the
shaft. Use G ¼ 12 _ 106 psi
for steel.
Solution:
Solution:
Solution:
Solution: