➢ Installation source →enable additional reporitories →done. ➢ Software selection →select all base environment and add-ons for selected environment. ➢ System →installation destination → select local disk →done → reclaim space →done. ➢ KDUMP →manual → 255→ done. ➢ Begin installation→set root password → create user→finish configuration.
Mentor Graphics Installation
➢ Go to home→create new folder(mgc_tree) →copy: tanner → RHEL pack1
→ RHEL pack2 → calibre. 1. To extract RHEL pack 1: ➢ Goto → RHEL pack1→right click →open termibal →type ls_lrt → type chmod 777 * → su → root 123 → ls_lrt →drag files → rpm –ivh --nodeps. (Same for all packs) 2. To extract Calibre: ➢ Right click mgc_tree → open terminal → pwd → ls → ls_lrt → chmod 777 aoi (tab) enter → ./aoi (tab) enter → D→yes. ➢ Now go to tanner → tanner_18_3_41 → copy (tanner 2018.341rhel6.bin) → into mgc_tree folder 3. To extract Tanner: ➢ Right click on mgc_tree → open terminal → pwd → ls → ls_lrt → chmod 777 t (tab) enter → ./t (tab) enter → /home/(username)/mgc_tree/tanner_in → enter ➢ Create new folder in mgc_tree (name it as Installables) → copy (aoi_cal_2018_.2_52_40_mib.exe)→ tanner _2018_341_rhel6.bin paste in installables ➢ Create new folder in mgc_tree (calibre) → copy 5 executed files of calibre (aoi_cal_2018.2_52.40, aoi_nxdat_2018.262.40, docs_cal_2018.2_15.10, install.ixl, _msidata and paste in calibre 4. Connect to LAN: ➢ Go to settings→network → wired → add profile → ipv4 → make automatic to manual → fill following → add Address: 192.168.10.** Netmask: 255.255.255.0 Gateway: 192.168.10.16 ➢ Right click on desktop → open terminal → cd Desktop → su → root123 → vi/etc/hosts → move the cursor at last point and press i → right arrow → enter ➢ 192.168.10.16 Mentorgraphics –pc →esc → :wq! → ping 162.168.10.16 → to close press ctl c ➢ Right click on desktop → open terminal → cd Desktop / → csh → source tanner.cshrc → lmstat → sedit/ledit 5. To link calibre and tanner : ➢ Click on set up →ok ➢ File open → tanner_EDA → tanner_tools_V2018.3 →features by tool → ledit → T cells →choose any .tab file and click open → set up calibre connections → calibre binary or script: $CALIBRE_HOME/bin/calibre 6. Variable: ➢ CALIBRE_HOME /home/vlsilab/mgc_tree/calibre/aoi_cal_2018.2_52.40 ➢ MGLS_LICENCE_FILE 1717@192.168.16 OK