Professional Documents
Culture Documents
Rheovis® AS 1125 NA
(old: Latekoll® MD na)
General Rheovis® AS 1125 NA is an efficient acrylic thickener (ASE) with pronounced pseudoplastic
(low-shear) flow behavior.
Properties
Physical form white liquid (emulsion)
Shelf life subject to appropriate storage under the usual storage and temperature conditions, our product is
durable for at least 12 months. Store protected against freezing.
Applications
Rheovis® AS 1125 NA is an efficient acrylic thickener (ASE) with pronounced pseudoplastic (low-
shear) flow behavior for many aqueous paint and coating systems. It offers performance highlights
such as:
• excellent thickening efficiency
• pronounced pseudoplastic (low-shear) flow behaviour
• increased KU-viscosity
• prolonged open time
• reduced sagging
• reduced syneresis during storage
• excellent viscosity stability after tinting
Recommend Concentrations Typical dosage of Rheovis® AS 1125 NA is between 1 to 3.5 percent on total formulation. We
recommend to determine the optimum dosage level for Rheovis® AS 1125 NA by laboratory trials
to achieve the desired performance.
Rheovis® AS 1125 NA should preferably be added at the final stage of manufacturing of the
formulation. The liquid form of Rheovis® AS 1125 NA makes post addition comfortable. As a
positive side effect, post addition offers the flexibility for viscosity adjustment from batch to batch.
Provided efficient mixing equipment is available, Rheovis® AS 1125 NA can be poured directly into
the mix. Should at any time the pH of the system fall below 7.5, additional alkali, ammonia or other
bases should be added to reactivate the thickening mechanism. The usage of ammonia as
neutralizing agent improves the water resistance property of the dry film.
Material Safety Data Sheet All safety information is provided in the Material Safety Data Sheet for Rheovis® AS 1125 NA.
Storage
Rheovis® AS 1125 NA is subject to appropriate storage under the usual storage and temperature
conditions, our products are durable for at least 2 years. The properties of the product are not affected
by low temperatures but it should not be stored next to direct heat.
Important
While the descriptions, designs, data and information contained herein are presented in good faith
and believed to be accurate, they are provided for guidance only. Because many factors may affect
processing or application/use, BASF recommends that the reader make tests to determine the
suitability of a product for a particular purpose prior to use. NO WARRANTIES OF ANY KIND,
EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE MADE REGARDING
PRODUCTS DESCRIBED OR DESIGNS, DATA OR INFORMATION SET FORTH, OR THAT THE
PRODUCTS, DESCRIPTIONS, DESIGNS, DATA OR INFORMATION MAY BE USED WITHOUT
INFRINGING THE INTELLECTUAL PROPERTY RIGHTS OF OTHERS. In no case shall the
descriptions, information, data or designs provided be considered a part of BASF's terms and
conditions of sale. Further, the descriptions, designs, data, and information furnished by BASF
hereunder are given gratis and BASF assumes no obligation or liability for the descriptions, designs,
data or information given or results obtained all such being given and accepted at the reader's risk.
BASF Corporation
Dispersions and Pigments
11501 Steele Creek Road
Charlotte, North Carolina 28273
Phone: (800) 251 – 0612
Email: edtech_info@basf.com
www.basf.us/dpsolutions