Professional Documents
Culture Documents
The ELT is programmed with either the aircraft tail number, a TECHNICAL SPECIFICATIONS
serial number or the aircraft operator designator.
TRANSMISSION
This operation takes only a few seconds with the programming 406.025 MHz
equipment developed by KANNAD. 5W (37 ±2dBm)
Modulation 16K0G1D
It can be installed inside an aircraft on a mounting bracket or (bi-phase L encoding) with aircraft
in a carry-off bag (both on options). identification code
Distress message every 50 s
KANNAD reserves the right to modify any of above specifications without notice. Not contractual photos.
The mounting bracket option includes a locking pin to avoid
121.5 MHz and 243 MHz
accidental activation before ELT removal. 100mW min (+20dBm)
The locking pin can be ordered separately with the carry off Modulation 3K20A3X
version. Audio sweep from 1420 Hz to 490 Hz
Continuous transmission
The ELT can be fitted with a "Water Switch Sensor" to be
POWER SUPPLY
activated automatically when in contact with water. Solid Cathode Lithium battery pack (LiMnO2)
Battery replacement every 6 years
A buzzer and a led indicate activation.
PROGRAMMING
Aircraft nationality and registration marking
Aircraft operator designator and ELT serial number up to
An integrated “self test” checks the main functions of the 4096
beacon. Aircraft ICAO 24 bit address
The test result is given by the led flashing sequence. Serial number
MECHANICS
Molded plastic
Color yellow (color compounded)
P/N
WEIGHT AND DIMENSIONS
CONTROLS
Ref: DOC098057H
KANNAD - ZI des Cinq Chemins - BP 23 - 56520 Guidel-France / Tel : +33 2 97 02 49 49 / Fax : +33 2 97 65 00 20 / contact.aviation@kannad.com