Professional Documents
Culture Documents
CAL
CAL
INTRODUCTION
This report is showing calculation of pile foundation Design of monopole
Design is Carried out as Per IS:Codes. As mentioned below
Codes Refrence
1.) IS:2911-1 SEC-2
2.) IS:6403
3.) IS:456
Design Parameter
I) Monopole Height = 30 M
II) Wind Speed = 170 Kmph
III) Monopole Type = NNBT
IV) Maximum Foundation forces (Unfactored)
a.) Vertical = 50.5 kN
b.) Moment = 877 kN-M
b.) Shear = 52.5 kN
V) Pile Detail
a.) Type of pile = Bored Cast in situ
b.) Diameter of pile = 500 mm
c.) length of pile = 7500 mm
2.750
b) Pile Capacities
Group Efficiency = 0.9
Ultimate capcity of pile in Comression = 1908 kN
Ultimate capcity of pile in Tention = 786 kN
Leteral capcity of pile = 88 kN
c) Geometry of foundation
Design of pile
At Y-direction
Mu/bd² = 0.11 N/mm²
Percentage of steel (From sp 16) Fe415 = 0.031
Ast. Required = 913 mm²
Min Area of steek as pe IS:456-2000 = 3577 mm²
Ast to be provided = 3577 mm²
Spacing required using 16mm dia Bars = 154 mm
Spacing Provided using 16mm dia Bars = 150 mm
PROJECT TOWER FOUNDATION CONSTRUCTION DESIGNED BY PANKAJ SHERWAL