Professional Documents
Culture Documents
+))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))),
* * * Allowable Bearing *
* * * Pressure *
* * * Tons Per sq ft *
* * *)))))))))))))))))))))))1
* Type of Bearing Material * Consistency * Recommended *
* * In Place * Value for *
* * * Range Use *
*)))))))))))))))))))))))))))))))))))))*)))))))))))))))))))*)))))))))))))))))))))))1
* Massive crystalline igneous and * Hard, sound rock * 60 to 100 80.0 *
* metamorphic rock: granite, dio- * * *
* rite, basalt, gneiss, thoroughly * * *
* cemented conglomerate (sound * * *
* condition allows minor cracks). * * *
*)))))))))))))))))))))))))))))))))))))*)))))))))))))))))))*)))))))))))))))))))))))1
* Foliated metamorphic rock: * Medium hard sound * 30 to 40 35.0 *
* slate, schist (sound condition * rock * *
* allows minor cracks). * * *
*)))))))))))))))))))))))))))))))))))))*)))))))))))))))))))*)))))))))))))))))))))))1
* Sedimentary rock; hard cemented * Medium hard sound * 15 to 25 20.0 *
* shales, siltstone, sandstone, * rock * *
* limestone without cavities. * * *
*)))))))))))))))))))))))))))))))))))))*)))))))))))))))))))*)))))))))))))))))))))))1
* Weathered or broken bed rock of * Soft rock * 8 to 12 10.0 *
* any kind except highly argil- * * *
* laceous rock (shale). RQD less * * *
* than 25. * * *
*)))))))))))))))))))))))))))))))))))))*)))))))))))))))))))*)))))))))))))))))))))))1
* Compaction shale or other highly * Soft rock * 8 to 12 10.0 *
* argillaceous rock in sound * * *
* condition. * * *
*)))))))))))))))))))))))))))))))))))))*)))))))))))))))))))*)))))))))))))))))))))))1
* Well graded mixture of fine and * Very compact * 8 to 12 10.0 *
* coarse-grained soil: glacial * * *
* till, hardpan, boulder clay * * *
* (GW-GC, GC, SC) * * *
*)))))))))))))))))))))))))))))))))))))*)))))))))))))))))))*)))))))))))))))))))))))1
* Gravel, gravel-sand mixtures, * Very compact * 6 to 10 7.0 *
* boulder gravel mixtures (SW, SP, * Medium to compact * 4 to 7 5.0 *
* SW, SP) * Loose * 2 to 6 3.0 *
*)))))))))))))))))))))))))))))))))))))*)))))))))))))))))))*)))))))))))))))))))))))1
* Coarse to medium sand, sand with * Very compact * 4 to 6 4.0 *
* little gravel (SW, SP) * Medium to compact * 2 to 4 3.0 *
* * Loose * 1 to 3 1.5 *
*)))))))))))))))))))))))))))))))))))))*)))))))))))))))))))*)))))))))))))))))))))))1
* Fine to medium sand, silty or * Very compact * 3 to 5 3.0 *
* clayey medium to coarse sand * Medium to compact * 2 to 4 2.5 *
* (SW, SM, SC) * Loose * 1 to 2 1.5 *
.)))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))-
7.2-142
TABLE 1 (continued)
Presumptive Values of Allowable Bearing Pressures for Spread
Foundations
+))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))),
* * * Allowable Bearing *
* * * Pressure *
* * * Tons Per sq ft. *
* * *)))))))))))))))))))))))1
* Type of Bearing Material * Consistency * Recommended *
* * In Place * Value for *
* * * Range Use *
*)))))))))))))))))))))))))))))))))))))*)))))))))))))))))))*)))))))))))))))))))))))1
* Homogeneous inorganic clay, * Very stiff to hard* 3 to 6 4.0 *
* sandy or silty clay (CL, CH) * Medium to stiff * 1 to 3 2.0 *
* * Soft * .5 to 1 0.5 *
* * * *
* Inorganic silt, sandy or clayey * Very stiff to hard* 2 to 4 3.0 *
* silt, varved silt-clay-fine Sand * medium to stiff * 1 to 3 1.5 *
* * Soft * .5 to 1 0.5 *
.)))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))-
Notes:
7.2-143