Professional Documents
Culture Documents
Issue No.:
Verify Check
Plant to conform to manufacturer’s specifications and Project
Support Group Regs. Hydraulics Tyres
Verify Check
Plant Operator is to provide daily checksheets to Safety Dept. on
a daily basis Rams Wheels
Where applicable, Personal Protective Equipment must be worn. Brakes
Plant Log Book Detailing service history in accordance with
Hoses
Manufacturer’s specifications should be written legibly in Connections Park Brake
English. (check for excessive
Contractor must produce proof of competence of operator, e.g.,
Certificate of Competence, Licence, Detailed Log Book wear, leaks and creep)
Verify Check
Position:
Instructions:
Date: / / Note : Register if to be used on Public Roads Verify Box to be ticked by Owner / Supplier / Operator prior to arrival onsite.
Check Box to be ticked after visual inspection by DMCI
This is to certify that the plant being supplied conforms to the relevant OH&S Legislation, and the requirements as detailed above. D.M. Consunji Inc.will check this Prestart Checklist to ensure the supplier has verified compliance to Legislative requirements and,
to register the plant onto the site. The operator will be required to participate in ongoing training and perform work in accordance with the relevant Work Method Statement. Should the plant be found to not conform to the above, then it will be prevented from
commencing work on the site until the non-compliance is rectified. D.M. Consunji, Inc. will not reimburse the Owner / Supplier / Contractor for any down / lost time so caused from the non-conformance.
This form does not remove any liability for the plant supplier to conform with the relevant OH&S Legalisation