The document describes an Airport Lighting Control and Monitoring System (ALCMS) that uses a UR-201 control and monitoring unit to control an entire airport lighting system wirelessly via a mesh network. The ALCMS allows for control of individual lights or grouping lights, intensity level settings, operating modes, and remote light activation. It also provides real-time monitoring of individual light status, control unit monitoring, and alarm logs. The interface has password protection and allows for administration of different user types and permissions.
The document describes an Airport Lighting Control and Monitoring System (ALCMS) that uses a UR-201 control and monitoring unit to control an entire airport lighting system wirelessly via a mesh network. The ALCMS allows for control of individual lights or grouping lights, intensity level settings, operating modes, and remote light activation. It also provides real-time monitoring of individual light status, control unit monitoring, and alarm logs. The interface has password protection and allows for administration of different user types and permissions.
The document describes an Airport Lighting Control and Monitoring System (ALCMS) that uses a UR-201 control and monitoring unit to control an entire airport lighting system wirelessly via a mesh network. The ALCMS allows for control of individual lights or grouping lights, intensity level settings, operating modes, and remote light activation. It also provides real-time monitoring of individual light status, control unit monitoring, and alarm logs. The interface has password protection and allows for administration of different user types and permissions.
mesh network Ground Lighting offers revolutionary Airport Lighting Control and Monitoring System (ALCMS) that enables control over entire system and individual light monitoring (battery level, charging status and operating condition). ALCMS is interacting with lighting system via UR-201 control & monitoring unit. CONTROL INTERFACE Grouping entire airfield lighting in 3 major groups (runway & approach lighting, taxiway lighting, PAPI) Control of entirely lighting system or separate groups of lights 3-step intensity level (10,30 or 100%) of group of lights Optionally: 5-step intensity level (3, 5, 10, 30 or 100%) Selecting preferable operating modes such as dusk-till-dawn, remote (allows for remote activation of lights) or flash Enabling or disabling remote activation (via GSM or VHF radio) Setting timer for remotely activated lights (15, 20, 30, 60 minutes, etc.) REAL-TIME MONITORING Individual light status monitoring Monitoring includes such parameters of light as: battery level, charging speed, temperature, operating status, etc. Monitoring of Control unit (GSM signal strength, back-up battery level, power connection) Alarm log: stores every critical failure of the system (e.g. lamp unavailable, battery is critically low) Colors of interface indicating general status of lights (e.g. red: critical fault, amber: requires attention) PASSWORD PROTECTION Interface can be accessed by authorized personnel only
In case of wrong password access will be denied
ADMIN MANAGEMENT Adding and configuring 2 primary type of ALCS users such as Masters and Users For ATC Supervisor, Airport General Manager: Master can add, edit or remove users For ATC operating personnel: user has full system access excluding admin management. User is unable to add, edit or remove other Users or Admins
Nonlinear Kalman Filter for Multi-Sensor Navigation of Unmanned Aerial Vehicles: Application to Guidance and Navigation of Unmanned Aerial Vehicles Flying in a Complex Environment