Professional Documents
Culture Documents
This laboratory has demonstrated its technical competence to operate in accordance with MS
ISO/IEC 17025:2005 (ISO/IEC 17025:2005).
This laboratory’s fulfillment of the requirements of ISO/IEC 17025 means the laboratory meets
both the technical competence requirements and management system requirements that are
Scan QR Code or visit www.jsm.gov.my/cab-directories for the current scope of accreditation
necessary for it to consistently deliver technically valid test results and calibrations. The
management system requirements in ISO/IEC 17025 are written in language relevant to
laboratory operations and operate generally in accordance with the principles of ISO 9001 (see
Joint ISO-ILAC-IAF Communiqué dated April 2017).
Type of Test/
Materials/ Standard Test Methods/
Properties Measured/
Products Tested Equipment/Techniques
Range of Measurement
Elastomeric Type Compression Quality Assurance MS 671 [App B] &
Laminated Elastomeric Test MS 671: 2014
Bearings, Plain Elastomeric (Max. Vertical Load 50,000 kN)
Bearing or Rubber Strips (Max. Horizontal Load 5000 kN) AS 5100: 2004 Part 4 App D2
with / without fasteners & AS 1523
accessories
BS 5400-1983 Section 9.2
Clause 7.2 (b) (i)
BS EN1337-3: 2005
(Annex H: Level 1)
Type of Test/
Materials/ Standard Test Methods/
Properties Measured/
Products Tested Equipment/Techniques
Range of Measurement
Elastomeric Type Compression Stiffness BS 6177:1982 Clause 9.6
Laminated Elastomeric (Max. Vertical Load 50,000 kN)
Bearings, Plain Elastomeric (Max. Horizontal Load 5000 kN) BS EN 1337-3:2005
Bearing or Rubber Strips [Annex H: Level 2]
with / without fasteners &
accessories AASHTO Sec.18 (2003)
(continued) Clause 18.7.4.5.6
Clause 18.7.4.5.7
Type of Test/
Materials/ Standard Test Methods/
Properties Measured/
Products Tested Equipment/Techniques
Range of Measurement
Structural & Mechanical Compression Quality Assurance Test BS 5400:1983 Sec. 9.2
Type (Max. Vertical Load 50,000 kN) Clause 7.2 (b)
Spherical Bearings, (Max. Horizontal Load 5000 kN)
Mechanical Pot Bearings, BS EN 1337-5: 2005 [Annex B]
Knuckle Leaf Bearings or
PTFE Elastomeric Bearings AASHTO Section 18 (2003)
with / without fasteners & Clause 18.7.2.5
accessories.
AASHTO Section 18 (2003)
Scan QR Code or visit www.jsm.gov.my/cab-directories for the current scope of accreditation
Clause 18.7.2.6
Type of Test/
Materials/ Standard Test Methods/
Properties Measured/
Products Tested Equipment/Techniques
Range of Measurement
Anti-Seismic & Damping Compression Quality Assurance Test BS EN 15129: 2009
Devices (Max. Vertical Load 50,000 kN) Clause 8.2.1.2.7
Shock Transmission Unit - (Max. Horizontal Load 5000 kN)
(STU), Lock Up Device BS EN 15129: 2009
(LUD), Hydraulic Dampers, Clause 8.2.1.2.6
Seismic Bearings (Structural Compression Under Zero
Isolation, e.g. HDRB, LRB Lateral Displacement
and Pendulum) with / without
fasteners & accessories Compression Stiffness BS EN 15129: 2009
Scan QR Code or visit www.jsm.gov.my/cab-directories for the current scope of accreditation
ISO 4664-1:2005 E
Anti-Vibration Washers Dynamic Vibration Test (Junker Test) DIN 65151, 2002-08
Note:
Signatories: