Professional Documents
Culture Documents
Start
1. The minimum penetration of the preservative with the surface timber piles shall be?
A. 150 mm
B. 200mm
C. 250mm
D. 100mm
2. Scales for weighing aggregates and cement shall be accurate within % throughout the range of use., Scales
shall be inspected and sealed as often as the Engineer may deem necessary to assure their continued
accuracy.
A. 1%
B. 1.5%
C. 0.5%
D. 2%
3. When cement is placed in contact with the aggregate , batches may rejected unless mixed with __ hours of such
contact.
A. 1.5
B. 2
C. .5
D. 2.5
https://www.proprofs.com/quiz-school/story.php?title=njq1ntq3szs7 1/18
1/24/2018 Materials Engineer Quiz - ProProfs Quiz
4. When mixed at the site or in a central mixing plant, the mixing time shall not be less than __ nor more than __
unless mixer performance test prove adequate mixing of concrete in a short period of time.
5. The ow of water shall be uniform and all water should be in drum by the end of the rst__ seconds of the mixing
period.
A. 45
B. 30
C. 15
D. 20
6. Concrete not place within __minutes from the time the ingredients were charged into the mixing drum shall be
used.
A. 120
B. 150
C. 60
D. 90
7. The contractor shall submit in writing a job mix formula for the mixture supported by laboratory test data along
with samples of resources of components and viscous temperature relationships to the engineer for testing and
approval at least.
A. 2 weeks
B. 3 weeks
C. 1 week
D. 4 weeks
8. The concrete sample should be stored in a moist condition temperature within the range of __until the time of
tests
A. 18* c -24*c
B. 15* c -18*c
C. 14* c -24*c
D. 16* c -24*c
9. the mass of wear of soil aggregates used in cement / lime proportions should not be more than__
A. 40
B. 50
C. 60
D. 45
https://www.proprofs.com/quiz-school/story.php?title=njq1ntq3szs7 2/18
1/24/2018 Materials Engineer Quiz - ProProfs Quiz
10. This is used in soil stabilized road surface due to its high __ property, that is, it absorb the retain water
A. Potassium chloride
B. Magnessium chloride
C. Sodium chloride
D. Calcium chloride
11. The uniform rate at which the movable head of the cbr machine travel is__
A. .06 in/min
B. .01 in/min
C. .1in/min
D. .08 in/min
12. Cast in place concrete shall not be post tentioned until at least ___ and until the compressive strength has
reached the strength speci ed
A. 7days
B. 10
C. 15
D. 28
A. Consistency
B. Softness
C. Hardness
D. Flash point
14. The __ is the most commonly used method in the design and evaluation of bituminous concrete mixes
B. Marshall stability
C. Extraction
D. Design mix
15. The sp, gravity of sodium sulfate used in soundness test for aggregate should be in range of
A. 1.051-1.154
B. 1.058/-1.184
C. 1 1.151-1.174
D. 1.25-14.178
https://www.proprofs.com/quiz-school/story.php?title=njq1ntq3szs7 3/18
1/24/2018 Materials Engineer Quiz - ProProfs Quiz
16. Vibration shall operate a frequency of 8300 to 9600 impulses per minute under load at a maximum spacing of
__cm
A. 30
B. 40
C. 50
D. 60
A. 1.28-1.408
B. 1.18-1.308
C. 1.295-1.308
D. 1.195-1.308
18. Aggregate accounts for 92-95% of the weight of the bituminous mixture asphalt accounts 5-8% of the weight of
the mix. the exact % to be used is determined by the__
A. Design mix
B. Trial mix
C. Job mix
D. Job mixture
19. In checking the temp of the mix , the thermometer should be inserted into the mix at least__inches
A. 2
B. 4
C. 6
D. 8
20. __ is applied on existing bit, or cement concrete surface with bitum matls
B. Bituminous sealcoat
21. The solution used in the soundness test of aggregate shall be cooled at a temp of 21 +_1*C and maintain that
temp for at least__hours
A. 24
B. 48
C. 18
D. 21
https://www.proprofs.com/quiz-school/story.php?title=njq1ntq3szs7 4/18
1/24/2018 Materials Engineer Quiz - ProProfs Quiz
B. Decrease permiability
C. Minimize compressibility
C. Bearing test
D. All
24. In concrete acceptance , core will be considered adequate if the average strength of the cores is = to what?
(https://www.proprofs.com/discuss/q/704665/concrete-acceptance-core-will-considered-adequate-the-averag)
Discuss (https://www.proprofs.com/discuss/q/704665/concrete-acceptance-core-will-considered-adequate-the-averag)
A. 80% of specified strength and if no single core is less than 75% of specified strength
B. 90% of specified strength and if no single core is less than 80% of specified strength
C. 85% of specified strength and if no single core is less than 75% of specified strength
D. 90% of specified strength and if no single core is less than 75% of specified strength
25. Before the cement is to be used , sampling must be done at least __-before use
A. 1 wk
B. 14 days
C. 2 wk
D. 21 days
26. Asphalt cement shall not be used while it is foaming nor shall be heated @ __ anytime after delivery
A. 107*
B. 159*
C. 123*
D. 167*
27. Moisture content of aggregate in bit mix shall not exceed __of the time it is introduce into the mixing unit
A. 1.55 %mass
B. 1.5% mass
C. 2&
D. 1%
https://www.proprofs.com/quiz-school/story.php?title=njq1ntq3szs7 5/18
1/24/2018 Materials Engineer Quiz - ProProfs Quiz
A. 1%
B. 2
C. 3
D. 4
29. Between stage of curing , concrete shall not be exposed for more than ___ hours
A. 24
B. 1.5
C. 3
D. 14
30. As a matls engineer , what will you do with the major honeycombed area that is considered as defective work
A. Plaster
D. None
31. If the strentgh of control specimen does not meet the req. and not feasible to obtain cores due to structural
considerations , as a matls engr what will be your decision?
D. None
32. After concrete has been placed , it is advisable to maintain fully welted and in position for how many hours
A. 14
B. 24
C. 72
D. 15-18
33. Rock shall be excavated to a depth ___below sub grade within the limit of the roadbed
A. 200mm
B. 150
C. 180
D. 200
A. 3m
B. 4
C. 5
D. 8
https://www.proprofs.com/quiz-school/story.php?title=njq1ntq3szs7 6/18
1/24/2018 Materials Engineer Quiz - ProProfs Quiz
A. 7
B. 14
C. 21
D. 28
A. Organic soils
B. Sandy
C. Clayey
D. Silty
A. 20,80
B. 21,79
C. 79,21
D. 80,20
A. 100mm
B. 150mm
C. 250mm
D. 200mm
A. +- 1%
B. +- 2%
C. +- 3%
D. +- 4%
A. 2mm
B. 2.2
C. 2.7
D. 3
A. 1000kg/cu m
B. 1200kg/cu m
C. 1400kg/cu m
D. 1600kg/cu m
https://www.proprofs.com/quiz-school/story.php?title=njq1ntq3szs7 7/18
1/24/2018 Materials Engineer Quiz - ProProfs Quiz
A. 9% after 5 cycles
43. The depth of the weakened joints must not be less than __ and width of__
A. 10" long
B. 12" long
C. 14" long
D. 18" long
45. __ is the rate of loading for concrete cylinder sample subject to a compression test
A. 10-20 Psi
B. 20-40 Psi
C. 20-50 Psi
D. 10-30 Psi
A. 10-15
B. 18-24
C. 16-18
D. 15--20
A. 1%
B. 2%
C. 3%
D. 4%
https://www.proprofs.com/quiz-school/story.php?title=njq1ntq3szs7 8/18
1/24/2018 Materials Engineer Quiz - ProProfs Quiz
49. If no core had been taken at the end of each day of operation and the project has already been completed , a core
shall be taken (https://www.proprofs.com/discuss/q/260595/core-been-taken-each-operation-project-already-
completed-sha)
Discuss (https://www.proprofs.com/discuss/q/260595/core-been-taken-each-operation-project-already-completed-sha)
A. 10-20mm
B. 10-30mm
C. 10-40mm
D. 10-60mm
51. How many hours do aggregate stockpile or binned for draining before being batch?
A. 1 hour
B. 2
C. 12
D. 24
A. 2
B. 3
C. 0
D. 1
A. Atterberg limit
B. Plasticity bindex
C. Liquid limit
D. Shrinkage limit
A. 0
B. 6
C. 10
D. 11
https://www.proprofs.com/quiz-school/story.php?title=njq1ntq3szs7 9/18
1/24/2018 Materials Engineer Quiz - ProProfs Quiz
A. 0%
B. 25%
C. 35%
D. 36%
A. 0
B. 25
C. 20
D. 35
A. 30-100 kg/cu m
B. 50-100 kg/cu m
C. 1120 kg/cu m
D. 1400 kg/cu m
A. 12"
B. 14"
C. 16"
D. 18"
59. This is the one of the most important engg properties of soil . it is de ned as the ability to resist sliding along
internal surface within the mass
A. Triaxial test
C. Bearing stress
60. The bearing blocks of the compression machine should be at least ___ greater than the diameter of the specimen
A. 2%
B. 3&
C. 4%
D. 5%
A. 5
B. 10
C. 15
D. 20
https://www.proprofs.com/quiz-school/story.php?title=njq1ntq3szs7 10/18
1/24/2018 Materials Engineer Quiz - ProProfs Quiz
A. 350
B. 400
C. 525
D. 300
A. A
B. B
C. C
D. P
64. For a bituminopus concrete mixes, the asphalt material may either be asphalt cement or asphalt emulsion
A. True
B. False
C. Option 3
D. Option 4
B. Natural gravel
C. Both a and b
A. Abrasion
B. Mortar strength
C. Absorption
E. A and c
67. Unless otherwise speci ed in special provision , the type of portland cement used in paving concrete shall be
A. Type2
B. Type1
C. Type3
D. Type4
https://www.proprofs.com/quiz-school/story.php?title=njq1ntq3szs7 11/18
1/24/2018 Materials Engineer Quiz - ProProfs Quiz
68. During construction of a road project , if all the materials to be used are tested for quality , inspection is no longer
required
A. True
B. False
C. Option 3
D. Option 4
A. Cbr method
C. Aashto t-180
70. Under excavation for structure , item 106, the back lling operation shall be done in__- cm loose layer and
compacted to at least___
A. 10, 80
B. 20,95
C. 60'30
D. 20,80
71. Soils are natural aggregate of minerals connected by strong and permanent cohesive forces
A. True
B. False
C. Option 3
D. Option 4
A. .425mm
B. .475mm
C. 2mm
D. 1.2mm
73. ___ is a soil which exibits the properties of a clay but contains an appreciable amount of sand
A. Sand clay
B. Clayey sand
C. Sandy clay
D. None
https://www.proprofs.com/quiz-school/story.php?title=njq1ntq3szs7 12/18
1/24/2018 Materials Engineer Quiz - ProProfs Quiz
A. Gradation
B. Mortar strength
C. Abrasion
D. All
E. A and b
75. Is the process whereby soil particles are contained more closely together through the reduction in the air voids
generally by mechanical means
A. Soil compaction
B. Mechanical analysis
D. Cbr
A. .425mm
B. 2mm
C. .07mm
D. Option 4
77. Soils containing more than 35% passing 0/075 # 200 sieve are classi ed under
B. Granular matls
C. Depends on PI
D. Option 4
78. Is provided for the purpose of counteracting moisture movement within the structure either by seepage or
capillary action
A. Surface drainage
B. Chemical admixtures
C. Compaction
D. Subsoil drainage
79. A subgrade soil with a cbr value of a ___ will require a thicker layer of subbase and base course
A. 5%
B. 15%
C. 30%
D. 3%
https://www.proprofs.com/quiz-school/story.php?title=njq1ntq3szs7 13/18
1/24/2018 Materials Engineer Quiz - ProProfs Quiz
A. Sodding or springing
B. Paving
C. Particle arrangement
D. Flattening
A. Compaction
B. Stabilization
C. Both a and b
D. Neither a or b
B. Water content
C. Weight of solids
D. None
A. Compactive efforts
B. Water content
C. A and b
D. None
A. Sieve test
B. Liquid limit
C. Compaction test
D. All
A. True
B. False
C. Option 3
D. Option 4
A. Water content
B. Degree of saturation
C. Void ratio
D. Porosity
https://www.proprofs.com/quiz-school/story.php?title=njq1ntq3szs7 14/18
1/24/2018 Materials Engineer Quiz - ProProfs Quiz
A. Rock asphalt
B. Asphalt emulsion
C. Asphalt cement
D. Cutback asphalt
A. Option 1
B. Option 2
C. Option 3
D. Option 4
89. Uncrashed aggregates are preferrable than crushed aggregates for bituminous mixture
A. True
B. False
D. Option 4
A. Flowmeter
B. Viscometer
C. Penetrometer
D. Pycnometer
A. Solid
B. Liqiud
C. Blown
D. Hot asphalt
A. Asphalt cement
C. Asphalt mixes
D. Asphalt emulsion
https://www.proprofs.com/quiz-school/story.php?title=njq1ntq3szs7 15/18
1/24/2018 Materials Engineer Quiz - ProProfs Quiz
A. VMA
B. Air voids
C. Permeable voids
D. Option 4
95. The optimum asphalt content obtained in a marshall stability test is the average of the asphalt content of the
maximum stability, max density
A. Maximum flow
C. 4% air voids
D. 4% flow
96. The main difference between the bulk measured speci c gravity of a bituminous mixtures and its maximum
measured speci c gravity is the
D. Volume of aggegates
A. Asphalt mixes
B. Asphalt cement
C. Emulsified asphalt
D. Rapid curing
98. A bituminous coating applied in an existing road to laying of a bituminous surface overlay is
A. Prime coat
B. Tack coat
C. Seal coat
D. Option 4
99. The distance travelled by a standard penetration needle on a prepared sample of asphalt under conditions for
normal penetrations is 8.6 MM. The material is
A. 40-50
B. 85-100
C. 120-150
D. 200-300
https://www.proprofs.com/quiz-school/story.php?title=njq1ntq3szs7 16/18
1/24/2018 Materials Engineer Quiz - ProProfs Quiz
100. The max sp. gravity of an asphalt mix containing 6.0% asphalt by wt of mix is 2.5. if the sp gravity of the
asphalt is 1.01, the speci c gr. of the aggregate =
A. 2.65
B. 2.56
C. 2.76
D. 2.7
A. Aggregate gradation
B. Asphalt content
C. Both of them
D. None
A. Strength
B. Durability
C. Workability
D. Tigthness
103. The seive used in the separation of aggregates after the abrasion test
A. 1.70 mm ,no.12
B. .425mm, no 40
C. 4.75mm, no4
D. .075, n0 200
A. Option 1
B. Option 2
C. Option 3
D. Option 4
Related Quizzes
Materials Engineer Quiz (/quiz-school/story.php?title=NjQ1NTQ3SZS7)
Ect001 (/quiz-school/story.php?title=comm21)
Laws And Ethics (/quiz-school/story.php?title=ODIzNDAz1CV8)
Gk Quiz For Engineers (/quiz-school/story.php?title=gk-quiz-engineers)
Audio Engineer Quiz (/quiz-school/story.php?title=audio-engineer-quiz)
https://www.proprofs.com/quiz-school/story.php?title=njq1ntq3szs7 17/18
1/24/2018 Materials Engineer Quiz - ProProfs Quiz
Featured Quizzes
Do You Believe In Love? (https://www.proprofs.com/quiz-school/story.php?title=3dq-do-you-believe-in-love)
Try Our Aptitude Test For Kids (https://www.proprofs.com/quiz-school/story.php?title=3dq-try-our-aptitude-test-for-kids_23a)
Who Will Be Your Future Husband? Personality Quiz (https://www.proprofs.com/quiz-school/story.php?title=who-is-your-future-husband)
Check Out How Much You Know About Winter? (https://www.proprofs.com/quiz-school/story.php?title=winter-trivia)
Which Beyblade Character Are You? (https://www.proprofs.com/quiz-school/story.php?title=3dq-which-kai-beyblade-character-are-you)
Related Topics
Engineering (https://www.proprofs.com/quiz-school/topic/engineering)
Electrical Engineering (https://www.proprofs.com/quiz-school/topic/electrical-engineering)
Mechanical Engineering (https://www.proprofs.com/quiz-school/topic/mechanical-engineering)
Architecture (https://www.proprofs.com/quiz-school/topic/architecture)
Back to top
(https://www.proprofs.com/quiz-school/)
https://www.proprofs.com/quiz-school/story.php?title=njq1ntq3szs7 18/18