Professional Documents
Culture Documents
Paper 2 June 2016 PDF
Paper 2 June 2016 PDF
IN
4) Corrosion along grain boundaries is called 10) Integrated drive generator employ a type of
a. Intergranular corrosion. high output AC generator that utilizes.
b. Crevice corrosion. a) A brushless system to produce
c. Galvanic corrosion. current.
d. Stress corrosion. b) Brushed and slip rings to carry
generated DC exciter current to the rotating
5) Fretting corrosion occur when field.
a) When two mating surface are subject c) Battery current to excite the field.
to slight relative motion.
b) When two mating surface are subject to 11) Convert 13.5 to binary
large relative motion. a) 1101.1
Page
DOWNLOAD OUR MOBILE APP FROM PLAY STORE @DGCA QUESTION PAPERS
IF YOU HAVE PREVIOUS SESSION QUESTION PAPERS, SHARE WITH US AT AVIATORSLINKS@GMAIL.COM
WWW.DGCAQUESTIONPAPERS.IN
aircraft and engine sensors and send the data b) Locked in neutral position
to the appropriate display. c) Locked in slightly down position
c) Allow the pilot to select the
appropriate system configuration for the 22) If three landing lights of 20watts are
current flight situation. connected to a 12v aircraft system the total
current will be
16) Direction of induced EMF a) 20 amphere
a) Lenz’s law. b) 3 amphere
b) Fleming right hand rule. c) 5.5 amphere
c) Fleming left hand rule. d) 5 amphere
Page
DOWNLOAD OUR MOBILE APP FROM PLAY STORE @DGCA QUESTION PAPERS
IF YOU HAVE PREVIOUS SESSION QUESTION PAPERS, SHARE WITH US AT AVIATORSLINKS@GMAIL.COM
WWW.DGCAQUESTIONPAPERS.IN
a) To smooth and enlarge holes to exact a) Emitter is positive with respect to the
size base
b) To enlarge the hole in the opposite b) Base is negative with respect to the
direction emitter
c) To begin the tapping process c) Base is positive with respect to the
emitter
24) Metal used to make stringers, bulkheads,
wing skin, formers, etc is Now you can get all the latest question
30)
a) Wrought aluminum alloy papers from our mobile app. Find
b) Casting aluminum alloy Download our mobile app from Play the
c) Permanent mold aluminum alloy Store @DGCA Question Papers
Join us on FACEBOOK.
25) Universal head rivet combination of decimal equivalent for the binary number
a) Counter sunk, brazier head 10110101
b) Counter sunk, flat head a) 121
c) Flat head, brazier head, and round b) 181
head c) 254
d) 264
26) Which of the non-ferrous alloy can be
case hardened 31) (1) An airspeed indicator measures the
a) Titanium differential between pitot and static air
b) Aluminum pressure surrounding the aircraft at any
c) Nickel moment of flight
d) Monel (2) An airspeed indicator measures the
differential between pitot and cabin air
27) Leveling of aircraft carried out by pressure at any moment of flight.
a) A scale used with plumb bob placed a) Both (1) and (2) are correct.
with level longitudinally and laterally b) Only (1) is correct.
b) A scale used with plumb bob placed c) Only (2) is correct.
3 (www.dgcaquestionpapers.in)
DOWNLOAD OUR MOBILE APP FROM PLAY STORE @DGCA QUESTION PAPERS
IF YOU HAVE PREVIOUS SESSION QUESTION PAPERS, SHARE WITH US AT AVIATORSLINKS@GMAIL.COM
WWW.DGCAQUESTIONPAPERS.IN
Join us on FACEBOOK.
DOWNLOAD OUR MOBILE APP FROM PLAY STORE @DGCA QUESTION PAPERS
IF YOU HAVE PREVIOUS SESSION QUESTION PAPERS, SHARE WITH US AT AVIATORSLINKS@GMAIL.COM
WWW.DGCAQUESTIONPAPERS.IN
45) The metal which have excellent bend 51) Large indentation in metal which are
ability and bend ductility but vulnerable to necessary to start a twist drill are made with
contamination is a) Centre punch
a) Titanium beta b) Drift punch
b) Titanium alpha c) Starting punch
c) Combined titanium alpha and beta
52) Twist drills are made of which material
46) The process which reduces brittleness a) Carbon steel or high speed alloy steel
imported by hardening is b) Low carbon steel or monel steel
a) Tempering c) Nickel steel
b) Normalizing
c) Annealing 53) Zener breakdown occurs when
a) Heavily doped
47) The diagram which is mainly used for b) Lightly doped
troubleshooting c) Moderately doped
a) Schematic diagram
b) Installation diagram 54) The rivets which are to be driven within
c) Block diagram specified time interval is termed as
a) Ice box rivets
48) The extra flexible cable used in primary b) Self plugging rivets
control surface is c) Wiredraw cherry lock rivets
a) 7x19
b) 7x7 55) In alloy designation the letter AD indicates
c) 1x19 a) Aluminum alloy 2117-T composition
b) Aluminum alloy 2024-T composition
49) Draw filling means c) Magnesium alloy 5056 composition
a) Cleaning the file using a wire brush
b) Moving the file lengthwise with work to 56) In AN470DD3-5 the DD indicates
finish in fine manner a) Aluminum alloy 2024 T composition
5 (www.dgcaquestionpapers.in)
DOWNLOAD OUR MOBILE APP FROM PLAY STORE @DGCA QUESTION PAPERS
IF YOU HAVE PREVIOUS SESSION QUESTION PAPERS, SHARE WITH US AT AVIATORSLINKS@GMAIL.COM
WWW.DGCAQUESTIONPAPERS.IN
60) The single bottle jacks are used to 65) The drawing which shows the ideal or
a) Raise single wheel during wheel perfect size of measurement is
replacement a) Dimension
b) Raise all the main wheels during wheel b) Tolerance
replacement c) Allowance
c) Raise only nose wheel
d) Raise only the tail section, there by tail 66) Hydraulic fluid lines are marked with color
hit during jacking is prevented code of
a) Blue and yellow
61) b) White and yellow
Now you can get all the latest question
papers from our mobile app. c) Red and blue
Download our mobile app from Play d) Yellow and grey
6 (www.dgcaquestionpapers.in)
DOWNLOAD OUR MOBILE APP FROM PLAY STORE @DGCA QUESTION PAPERS
IF YOU HAVE PREVIOUS SESSION QUESTION PAPERS, SHARE WITH US AT AVIATORSLINKS@GMAIL.COM
WWW.DGCAQUESTIONPAPERS.IN
DOWNLOAD OUR MOBILE APP FROM PLAY STORE @DGCA QUESTION PAPERS
IF YOU HAVE PREVIOUS SESSION QUESTION PAPERS, SHARE WITH US AT AVIATORSLINKS@GMAIL.COM