Professional Documents
Culture Documents
Descriptive test -I
Class: VI B.Tech I Sem Branch : EEE.
Subject: ELECTRICAL DISTRIBUTION SYSTEMS
Date: 16-09-2019 MAx.Marks:30 Time: 9-30AM 11-00AM
Name of the Student: Roll No:
Answer all the questions
Each Question carries 10 marks
1. Explain the following terms. [L1] 2*5=10M
a) Define Load factor . b) What is plant capacity factor.
c) Define Average load d) Define loss factor e) Define Demand factor
. or
2. (a)Discuss the relationship between load factor and loss factor for different load cases? [L2] 5M
(b) Explain various types of loads. [L4] 5M
3. (a) Explain the method of voltage drop calculations in A.C. distributor. [L4] 5M
(b) Compare overhead and underground distribution systems? [L3] 5M
or
4. (a) Compare the radial and loop type primary feeders? [L3] 5M
(b) Explain the basic design practice of secondary distribution system? [L2] 5M
5. A DC ring main ABCDA is fed from point A with 250V and the resistance of various sections are
as follows: AB=0.02Ω , BC=0.018 Ω , CD=0.025 Ω , DA=0.01 Ω. The main supplies the load of
150A at point B, 300A at point C and 250A at point D. Determine the voltage at each load point.
If A and C are interconnected with 0.02 Ω find current through interconnector. [L3] 10M
or
6. A single phase ac distributor AB 300m long is fed from end A and is loaded as under (i) 100A at
0.707 p.f lagging 200m from point A (ii) 200A at 0.8 p.f lagging 300m from point A. The
load resistance of distributor is 0.2Ω and 0.1Ω/km. Calculate the total voltage drop in the
distributor. The load p.f Refer to the voltage at the far end? [L3] 10M