Professional Documents
Culture Documents
88th Avenue
Miami, Florida 33172
MASTERLIGN® basic
Phone: (305) 591-8935 Alignment of horizontal machines
File No. _____ Machine No. Type ___________________ Operator ____________________ Date ________________
Stationary
Machine Remove cap.
Adjust prism until coordinates are close to 00.
MTBM
(Machine To 0369 will appear on the screen.
Be Moved) Rotate shaft to the first clock position using the
ALI 5.020 external inclinometer.
Resume: You can resume where you Press the number key of the clock position (e.g.
last left off by pressing . for 12 o'clock) and press . Measure at least three of
the four clock positions, as viewed towards the stationary
machine. Go to Step 4a or 4b è
Soft Foot
(+) p add
shims (-) q remove
shims (+) p add
shims (-) q remove
shims (+) p toward
3 oclock (-) q toward
9 oclock (+) p toward
3 oclock (-) q toward
9 oclock
Turn shafts to the 1:30 clock position (45°) using the Excellent Acceptable Excellent Acceptable Excellent Acceptable
Move machine horizontally into alignment. All Speeds: Maximum Soft Foot Reading 2 mils.
Use OEM or in-house tolerances if available.
Retighten bolts.