Professional Documents
Culture Documents
PFI CHFU high flow filter cartridge is made by diameter 6” and pleated design with flow area and contamination
removal capacity.
This design helps end user to reduce capital investment, save plant space, easy to change‐out and etc.
PFI HF product has various applications on water treatment system.
Product Features : Specifications :
Fewer cartridges and less time to assemble Dimensions :
Common‐use size:20”,40”,60” length cartridge Diameter : 6”(152mm)
Filtration system are 50% smaller than typical size Length : 20”(508mm),40”(1016mm),60”(1524mm)
system Micron : 1μm, 3μm, 5μm, 10μm, 15μm, 20μm,
In to out flow direction keeps all of the 40μm, 50μm, 70μm, 100μm
contamination catched
Handle design makes change fast,easy and safe
Large surface area pleated design provides low
pressure drop and long service life
Polypropylene cartridges comply with FAD grade
Flow rate up to 1900LPM per cartridge
Material of Construction :
Filter Medium : Polypropylene,Cellulose,Melt Blown PP
Support : Polypropylene
End Caps : Glass Fiber Reinforced Polypropylene
O‐ring Seal options : EPDM, NBR, Viton
Max. Operating Differential Pressure:
o Polypropylene : 3.44bar@82oC,50psi@180oF
o Glass Fiber : 3.44bar@121oC,50psi@180oF
Suggestion Flow :
o 20”: 660 LPM
o 40”: 1300 LPM
o 60”: 1900 LPM
Application :
Industry: Municipal water,RO prefiltration,reclaimed water,coolant,nozzle protection,boiler
condensate,desalination
Chemical: Quench water,aqueous salt solutions,final products
Petrochemicals: Waterflooding,produced water,enhanced oil recovery,completion fluids,amine sweetening,final
products
Electronics: RO prefiltration,process water,deionized water pre‐filtration
Food and Beverage: Process and blending water,bottled water
Pharmaceutical: Process water
Power Plant: Supplementary water,condensation water,coolant
Print@USA/2001
Pressure Drop vs .Flowrate@20°C
Part Number/Order Information:
PFI CHFU*=#+ (e.x., PFI CHFU‐5‐40‐PP‐E‐C)
Code* Removal Rating Code= Length Code# Media Code+ Seal Codex View
01 0,1 µm 20 20” PP Polypropylene E EPDM B Belt
045 0,45 µm 40 40” GF Glass Fiber N NBR C Casing
1 1 µm 60 60” PB Melt‐Blown
5 5 µm
10 10 µm
20 20 µm
Print@USA/2001