You are on page 1of 2

(To be printed on Bidder/Local Supplier Letter Head and attached MANDATORILY with each Technical

Bid of RFQ)

Date :

Compliance Certificate

RFQ No :
10
RFQ Title : UPS 6KVA
WE quoted you our Brand Legrand 10000VA
Tower/Rack ONLINE UPS origin Italy
We confirmed that our quoted UPS is fully comply
with client below specification
Frequency, input 45 - 65 HZ
Frequency, output 50 / 60 HZ +/- 3 HZ
Power, output 6 KVA, 4200 W
TYPE HIGH DENSITY DOUBLE CONVERSION
ONLINE POWER PROTECTION
BARRIER TYPE HIGH DENSITY DOUBLE CONVERSION
ONLINE POWER PROTECTION
HIGH DENSITY DOUBLE CONVERSION
ONLINE POWER PROTECTION
Quoted Items fully comply with Type, battery LEAD - ACID
ADDC RFQ Specifications : Voltage, input 230 V
(Specify the RFQ item Nos. and code of
each items) Voltage, output 220 / 230 / 240 V

OTHER INFO :
Efficiency at Full Load : Up to 92%
Output Connections : IEC 320 C19
Input Connections : Hardwire 3 Wire ( 1 PH+N+G)
Bypass : Automatic and Manual ( Built -in)
Battery Type : Maintenance free sealed lead acid
battery with suspended electrolyte leak proof
Repalcement Battery : RBC44
Runtime - 172/80 (Estimates at Half and Full Load (in
minutes))

Quoted Items with deviation(s) to


ADDC RFQ Specifications* : If any Deviation, please mention here
(Specify the RFQ item Nos. and code of
each items)
This is to certify that the proposed materials under each item(s) of RFQ for the above
project fully comply in line with the item(s) specifications and attachment provided as
part of the RFQ including terms and conditions, certifications and in accordance with
prequalification standards set by Transworld , other than the deviation(s) highlighted
in the offer.

We take full responsibility in case of any deviation(s) noted after awarding of Purchase
Order (including during approval of data sheets & drawings or FAT stage) to replace
with specified or approved model/type without any commercial and time impact.
Trans world oil sources reserves the full right to cancel the PO if the Manufacturer/
Supplier fails to comply with the Specifications & standards of PO or if the alternate
proposed material is not in line with the approved ones.

Bidder/Local Supplier

(Sign & Stamp)

*In case of any non-compliance to the requested RFQ item(s) specifications, the details of such deviation(s) shall be
specified under remarks of RFQ for each item(s) or on separate sheet, if needed. Such deviations needs to be
clarified / accepted during the pre-award stage.

Non-compliance may lead to disqualification of item(s)/offer. However, if the deviation(s) is due to the item(s) model
/ part in the RFQ being obsolete, the Bidder should clearly specify the same under remarks against that item.

You might also like