Professional Documents
Culture Documents
ISO 9001
REGISTERED QMS
ISD
www.hitechseals.com
Introduction to Hi-Tech Seals
In 1990, Hi-Tech Seals was founded in Edmonton, Alberta. Since then, our company has expanded to five locations across
Canada. A major factor in our success has been our ability to source quality parts at affordable prices and stock them for
speedy delivery. As an international seal distribution company, we utilize both engineering and manufacturing resources
worldwide. What this means to you is that we will seek the solution that works best for you, the customer.
• Hi-Tech Seals shall distribute and/or manufacture a quality product that will meet our customers requirements
and expectations.
• Hi-Tech Seals shall strive to continually improve the effectiveness of the Quality Management System.
• Hi-Tech Seals Quality Policy shall be communicated and understood at all levels of the organization.
• Hi-Tech Seals Quality Policy and Quality Objectives will be reviewed for effectiveness and accuracy during the
Annual Management Review.
Optical Measurement
Our video measurement device, the Micro-Vu Matrix, provides us with the ability
to measure parts to within six decimal places of accuracy. We are able to provide
the Micro-Vu service for both inspection and for replication purposes. With the
Micro-Vu we can determine seal ID, OD, C/S, heights, angles, and even areas and
volumes.
Rapid Prototyping
While working with Hi-Tech Seals you gain access to engineering, drafting and machining
support. Hi-Tech Seals has an in-house machining department capable of creating prototype
parts without expensive tooling costs and lengthy lead times. This means we can supply
parts for testing purposes the same week you request them, this greatly reduces the time
required to design products.
24/7 Service
Hi-Tech Seals has a sales representative available 24 hours a day, 7 days a week to serve you. You can reach your local sales
representative through your regular Hi-Tech Seals branch phone number. Our after-hours charges are $100.00 per call in,
provided we can service you. After-hours machining charges are $100.00 for the call in + $175.00 per hour of labour, with
a minimum of 1 hour labour charge. Hi-Tech Seals reserves the right to change pricing without notice. Our regular service
hours are 7:30 am to 5:30 pm, Monday- Friday.
Table
Table of
O-Rings 1
of Contents
O-Ring Cord 8
O-Ring Kits 9
Back-Up Rings 12
T-Seals 13
Capped T-Seal 18
Wipers 21
Loaded
31
U-Cups
LIP 52
Z-Seals 54
Homogenous
61
U-Cups
Urethane
64
U-Cups
SpectraSeals® 68
Buffer Seals 70
Modular
79
Bearings
Wear Rings 82
Crown Seals® 88
Piston Rings 92
Table of Contents
Fluid Seals 101
Braided
132
Packaging
Protectors 136
Spherical
146
Plain Bearings
Washers 148
Vibration
152
Mounts
O-Rings 153
Wipers 185
Homogenous
194
U-Cups
Table of Contents
SpectraSeals® 68
Refer to Imperial
Modular
216
Bearings
Braided Packaging
Refer to Imperial 132
V-Seals 264
Material
272
Summary
Edmonton, AB
Edmonton, AB (Head
(Head Office)
Office)
VI 9211 -- 41
9211 41 Avenue
Avenue NW
NW www.hitechseals.com
780.438.6055
780.438.6055
Imperial Seals O-Rings
O-Rings
Highly Saturated Nitrile -40°C to 150°C
Product Description:
The O-ring is the most widely used seal in history because of its simplicity, low cost, ease of installation and small space
requirements. O-rings are designed for both static and dynamic applications. A properly designed O-ring groove allows the
O-ring to be squeezed diametrically out-of-round even before the application of pressure. The O-ring seals by distortion of
its resilient elastic compound to fill the leakage path.
Example: HS8 224 - Highly Saturated Nitrile, 80 Durometer - 1 - 3/4” Nom. I.D., 1/8” Nom. C/S
Edmonton, AB
Edmonton, AB (Head
(Head Office)
Office)
www.hitechseals.com 9211 -- 41
41 Avenue
Avenue NW
NW 1
www.hitechseals.com 9211 1
780.438.6055
780.438.6055
O-Rings Imperial Seals
W
R
W*
D Squeeze E Groove Width +0.010/-0.000 R
Diametrical
No One Two
O-Ring Groove Clearance Groove
% Back- Up Back- Up Back- Up
C/S Depth Inches Max. Radius
Ring Ring Rings
0.070 0.049 - 0.057 0.010 - 0.025 14 - 35 0.004 0.110 0.165 0.220 0.008 - 0.016
0.103 0.075 - 0.087 0.013 - 0.031 13 - 30 0.005 0.150 0.205 0.260 0.008 - 0.016
0.139 0.101 - 0.117 0.018 - 0.042 13 - 30 0.006 0.197 0.252 0.307 0.016 - 0.031
0.210 0.156 - 0.180 0.025 - 0.059 12 - 28 0.006 0.283 0.354 0.429 0.016 - 0.031
0.275 0.212 - 0.242 0.028 - 0.069 10 - 25 0.007 0.374 0.484 0.594 0.031 - 0.047
W R
D Squeeze
Groove Width +0.008/-0.000
O-Ring Groove
C/S Groove Depth +0.004/-0.000 % Hydraulic Pneumatic Radius
0.070 0.051 21 - 36 0.126 0.114 0.008 - 0.016
0.103 0.079 19 - 30 0.157 0.142 0.008 - 0.016
0.139 0.106 17 - 26 0.209 0.189 0.016 - 0.031
0.210 0.165 15 - 23 0.299 0.276 0.016 - 0.031
0.275 0.224 13 - 20 0.354 0.335 0.031 - 0.047
O-Rings
Pneumatic applications typically do not
use a Back-up ring.
D E W* R
Squeeze
Groove Width +0.010/-0.000
Groove Depth Hydraulic Pneumatic Diametrical No One Two
O-Ring Clearance Back- Up Back- Up Back- Up Groove
C/S Hydraulic Pneumatic Inches % Inches % Max. Ring Ring Rings Radius
0.009 - 0.007 - 0.008 -
0.070 0.054 - 0.058 0.056 - 0.060 13 - 27 10 - 24 0.004 0.110 0.165 0.220
0.019 0.017 0.016
0.012 - 0.008 - 0.008 -
0.103 0.081 - 0.088 0.083 - 0.092 12 - 24 8 - 22 0.005 0.150 0.205 0.260
0.025 0.023 0.016
0.015 - 0.010 - 0.016 -
0.139 0.112 - 0.120 0.115 - 0.125 11 - 22 7 - 20 0.006 0.197 0.252 0.307
0.031 0.028 0.031
0.023 - 0.015 - 0.016 -
0.210 0.173 - 0.182 0.177 - 0.190 11 - 20 7 - 18 0.006 0.283 0.354 0.429
0.042 0.038 0.031
0.025 - 0.017 - 0.031 -
0.275 0.229 - 0.244 0.234 - 0.253 9 - 19 6 - 17 0.007 0.374 0.484 0.594
0.052 0.047 0.047
276.0 4000
There are different methods to counter O-ring extrusion. One 207.0 3000
of these methods is to simply increase the durometer rating 138.0 2000
Fluid Pressure (Bar)
13.8 200
DUROMETER - 70 - 80 - 90
(HARDNESS SHORE A)
I.D.
C/S
O-Rings
O-Rings
141 2 - 5/16 3/32 2.300 ± 0.020 0.103 ± 0.003 212 7/8 1/8 0.859 ± 0.010 0.139 ± 0.004
142 2 - 3/8 3/32 2.362 ± 0.020 0.103 ± 0.003 213 15/16 1/8 0.921 ± 0.010 0.139 ± 0.004
143 2 - 7/16 3/32 2.425 ± 0.020 0.103 ± 0.003 214 1 1/8 0.984 ± 0.010 0.139 ± 0.004
144 2 - 1/2 3/32 2.487 ± 0.020 0.103 ± 0.003 215 1 - 1/16 1/8 1.046 ± 0.010 0.139 ± 0.004
145 2 - 9/16 3/32 2.550 ± 0.020 0.103 ± 0.003 216 1 - 1/8 1/8 1.109 ± 0.012 0.139 ± 0.004
146 2 - 5/8 3/32 2.612 ± 0.020 0.103 ± 0.003 217 1 - 3/16 1/8 1.171 ± 0.012 0.139 ± 0.004
147 2 - 11/16 3/32 2.675 ± 0.022 0.103 ± 0.003 218 1 - 1/4 1/8 1.234 ± 0.012 0.139 ± 0.004
148 2 - 3/4 3/32 2.737 ± 0.022 0.103 ± 0.003 219 1 - 5/16 1/8 1.296 ± 0.012 0.139 ± 0.004
149 2 - 13/16 3/32 2.800 ± 0.022 0.103 ± 0.003 220 1 - 3/8 1/8 1.359 ± 0.012 0.139 ± 0.004
150 2 - 7/8 3/32 2.862 ± 0.022 0.103 ± 0.003 221 1 - 7/16 1/8 1.421 ± 0.012 0.139 ± 0.004
151 3 3/32 2.987 ± 0.024 0.103 ± 0.003 222 1 - 1/2 1/8 1.484 ± 0.015 0.139 ± 0.004
152 3 - 1/4 3/32 3.237 ± 0.024 0.103 ± 0.003 223 1 - 5/8 1/8 1.609 ± 0.015 0.139 ± 0.004
153 3 - 1/2 3/32 3.487 ± 0.024 0.103 ± 0.003 224 1 - 3/4 1/8 1.734 ± 0.015 0.139 ± 0.004
154 3 - 3/4 3/32 3.737 ± 0.028 0.103 ± 0.003 225 1 - 7/8 1/8 1.859 ± 0.018 0.139 ± 0.004
155 4 3/32 3.987 ± 0.028 0.103 ± 0.003 226 2 1/8 1.984 ± 0.018 0.139 ± 0.004
156 4 - 1/4 3/32 4.237 ± 0.030 0.103 ± 0.003 227 2 - 1/8 1/8 2.109 ± 0.018 0.139 ± 0.004
157 4 - 1/2 3/32 4.487 ± 0.030 0.103 ± 0.003 228 2 - 1/4 1/8 2.234 ± 0.020 0.139 ± 0.004
158 4 - 3/4 3/32 4.737 ± 0.030 0.103 ± 0.003 229 2 - 3/8 1/8 2.359 ± 0.020 0.139 ± 0.004
159 5 3/32 4.987 ± 0.035 0.103 ± 0.003 230 2 - 1/2 1/8 2.484 ± 0.020 0.139 ± 0.004
160 5 - 1/4 3/32 5.237 ± 0.035 0.103 ± 0.003 231 2 - 5/8 1/8 2.609 ± 0.020 0.139 ± 0.004
161 5 - 1/2 3/32 5.487 ± 0.035 0.103 ± 0.003 232 2 - 3/4 1/8 2.734 ± 0.024 0.139 ± 0.004
162 5 - 3/4 3/32 5.737 ± 0.035 0.103 ± 0.003 233 2 - 7/8 1/8 2.859 ± 0.024 0.139 ± 0.004
163 6 3/32 5.987 ± 0.035 0.103 ± 0.003 234 3 1/8 2.984 ± 0.024 0.139 ± 0.004
164 6 - 1/4 3/32 6.237 ± 0.040 0.103 ± 0.003 235 3 - 1/8 1/8 3.109 ± 0.024 0.139 ± 0.004
165 6 - 1/2 3/32 6.487 ± 0.040 0.103 ± 0.003 236 3 - 1/4 1/8 3.234 ± 0.024 0.139 ± 0.004
166 6 - 3/4 3/32 6.737 ± 0.040 0.103 ± 0.003 237 3 - 3/8 1/8 3.359 ± 0.024 0.139 ± 0.004
167 7 3/32 6.987 ± 0.040 0.103 ± 0.003 238 3 - 1/2 1/8 3.484 ± 0.024 0.139 ± 0.004
168 7 - 1/4 3/32 7.237 ± 0.045 0.103 ± 0.003 239 3 - 5/8 1/8 3.609 ± 0.028 0.139 ± 0.004
169 7 - 1/2 3/32 7.487 ± 0.045 0.103 ± 0.003 240 3 - 3/4 1/8 3.734 ± 0.028 0.139 ± 0.004
170 7 - 3/4 3/32 7.737 ± 0.045 0.103 ± 0.003 241 3 - 7/8 1/8 3.859 ± 0.028 0.139 ± 0.004
171 8 3/32 7.987 ± 0.045 0.103 ± 0.003 242 4 1/8 3.984 ± 0.028 0.139 ± 0.004
172 8 - 1/4 3/32 8.237 ± 0.050 0.103 ± 0.003 243 4 - 1/8 1/8 4.109 ± 0.028 0.139 ± 0.004
173 8 - 1/2 3/32 8.487 ± 0.050 0.103 ± 0.003 244 4 - 1/4 1/8 4.234 ± 0.030 0.139 ± 0.004
174 8 - 3/4 3/32 8.737 ± 0.050 0.103 ± 0.003 245 4 - 3/8 1/8 4.359 ± 0.030 0.139 ± 0.004
175 9 3/32 8.987 ± 0.050 0.103 ± 0.003 246 4 - 1/2 1/8 4.484 ± 0.030 0.139 ± 0.004
176 9 - 1/4 3/32 9.237 ± 0.055 0.103 ± 0.003 247 4 - 5/8 1/8 4.609 ± 0.030 0.139 ± 0.004
177 9 - 1/2 3/32 9.487 ± 0.055 0.103 ± 0.003 248 4 - 3/4 1/8 4.734 ± 0.030 0.139 ± 0.004
178 9 - 3/4 3/32 9.737 ± 0.055 0.103 ± 0.003 249 4 - 7/8 1/8 4.859 ± 0.035 0.139 ± 0.004
250 5 1/8 4.984 ± 0.035 0.139 ± 0.004
201 3/16 1/8 0.171 ± 0.005 0.139 ± 0.004 251 5 - 1/8 1/8 5.109 ± 0.035 0.139 ± 0.004
202 1/4 1/8 0.234 ± 0.005 0.139 ± 0.004 252 5 - 1/4 1/8 5.234 ± 0.035 0.139 ± 0.004
203 5/16 1/8 0.296 ± 0.005 0.139 ± 0.004 253 5 - 3/8 1/8 5.359 ± 0.035 0.139 ± 0.004
204 3/8 1/8 0.359 ± 0.005 0.139 ± 0.004 254 5 - 1/2 1/8 5.484 ± 0.035 0.139 ± 0.004
205 7/16 1/8 0.421 ± 0.005 0.139 ± 0.004 255 5 - 5/8 1/8 5.609 ± 0.035 0.139 ± 0.004
206 1/2 1/8 0.484 ± 0.005 0.139 ± 0.004 256 5 - 3/4 1/8 5.734 ± 0.035 0.139 ± 0.004
207 9/16 1/8 0.546 ± 0.007 0.139 ± 0.004 257 5 - 7/8 1/8 5.859 ± 0.035 0.139 ± 0.004
262 7 1/8 6.984 ± 0.040 0.139 ± 0.004 335 2 - 3/4 3/16 2.725 ± 0.020 0.210 ± 0.005
263 7 - 1/4 1/8 7.234 ± 0.045 0.139 ± 0.004 336 2 - 7/8 3/16 2.850 ± 0.020 0.210 ± 0.005
264 7 - 1/2 1/8 7.484 ± 0.045 0.139 ± 0.004 337 3 3/16 2.975 ± 0.024 0.210 ± 0.005
265 7 - 3/4 1/8 7.734 ± 0.045 0.139 ± 0.004 338 3 - 1/8 3/16 3.100 ± 0.024 0.210 ± 0.005
266 8 1/8 7.984 ± 0.045 0.139 ± 0.004 339 3 - 1/4 3/16 3.225 ± 0.024 0.210 ± 0.005
267 8 - 1/4 1/8 8.234 ± 0.050 0.139 ± 0.004 340 3 - 3/8 3/16 3.350 ± 0.024 0.210 ± 0.005
268 8 - 1/2 1/8 8.484 ± 0.050 0.139 ± 0.004 341 3 - 1/2 3/16 3.475 ± 0.024 0.210 ± 0.005
269 8 - 3/4 1/8 8.734 ± 0.050 0.139 ± 0.004 342 3 - 5/8 3/16 3.600 ± 0.028 0.210 ± 0.005
270 9 1/8 8.984 ± 0.050 0.139 ± 0.004 343 3 - 3/4 3/16 3.725 ± 0.028 0.210 ± 0.005
271 9 - 1/4 1/8 9.234 ± 0.055 0.139 ± 0.004 344 3 - 7/8 3/16 3.850 ± 0.028 0.210 ± 0.005
272 9 - 1/2 1/8 9.484 ± 0.055 0.139 ± 0.004 345 4 3/16 3.975 ± 0.028 0.210 ± 0.005
273 9 - 3/4 1/8 9.734 ± 0.055 0.139 ± 0.004 346 4 - 1/8 3/16 4.100 ± 0.028 0.210 ± 0.005
274 10 1/8 9.984 ± 0.055 0.139 ± 0.004 347 4 - 1/4 3/16 4.225 ± 0.030 0.210 ± 0.005
275 10 - 1/2 1/8 10.484 ± 0.055 0.139 ± 0.004 348 4 - 3/8 3/16 4.350 ± 0.030 0.210 ± 0.005
276 11 1/8 10.984 ± 0.065 0.139 ± 0.004 349 4 - 1/2 3/16 4.475 ± 0.030 0.210 ± 0.005
277 11 - 1/2 1/8 11.484 ± 0.065 0.139 ± 0.004 350 4 - 5/8 3/16 4.600 ± 0.030 0.210 ± 0.005
278 12 1/8 11.984 ± 0.065 0.139 ± 0.004 351 4 - 3/4 3/16 4.725 ± 0.030 0.210 ± 0.005
279 13 1/8 12.984 ± 0.065 0.139 ± 0.004 352 4 - 7/8 3/16 4.850 ± 0.030 0.210 ± 0.005
280 14 1/8 13.984 ± 0.065 0.139 ± 0.004 353 5 3/16 4.975 ± 0.037 0.210 ± 0.005
281 15 1/8 14.984 ± 0.065 0.139 ± 0.004 354 5 - 1/8 3/16 5.100 ± 0.037 0.210 ± 0.005
282 16 1/8 15.955 ± 0.075 0.139 ± 0.004 355 5 - 1/4 3/16 5.225 ± 0.037 0.210 ± 0.005
283 17 1/8 16.956 ± 0.080 0.139 ± 0.004 356 5 - 3/8 3/16 5.350 ± 0.037 0.210 ± 0.005
284 18 1/8 17.955 ± 0.085 0.139 ± 0.004 357 5 - 1/2 3/16 5.475 ± 0.037 0.210 ± 0.005
358 5 - 5/8 3/16 5.600 ± 0.037 0.210 ± 0.005
309 7/16 3/16 0.412 ± 0.005 0.210 ± 0.005 359 5 - 3/4 3/16 5.725 ± 0.037 0.210 ± 0.005
310 1/2 3/16 0.475 ± 0.005 0.210 ± 0.005 360 5 - 7/8 3/16 5.850 ± 0.037 0.210 ± 0.005
311 9/16 3/16 0.537 ± 0.007 0.210 ± 0.005 361 6 3/16 5.975 ± 0.037 0.210 ± 0.005
312 5/8 3/16 0.600 ± 0.009 0.210 ± 0.005 362 6 - 1/4 3/16 6.225 ± 0.040 0.210 ± 0.005
313 11/16 3/16 0.662 ± 0.009 0.210 ± 0.005 363 6 - 1/2 3/16 6.475 ± 0.040 0.210 ± 0.005
314 3/4 3/16 0.725 ± 0.010 0.210 ± 0.005 364 6 - 3/4 3/16 6.725 ± 0.040 0.210 ± 0.005
315 13/16 3/16 0.787 ± 0.010 0.210 ± 0.005 365 7 3/16 6.975 ± 0.040 0.210 ± 0.005
316 7/8 3/16 0.850 ± 0.010 0.210 ± 0.005 366 7 - 1/4 3/16 7.225 ± 0.045 0.210 ± 0.005
317 15/16 3/16 0.912 ± 0.010 0.210 ± 0.005 367 7 - 1/2 3/16 7.475 ± 0.045 0.210 ± 0.005
318 1 3/16 0.975 ± 0.010 0.210 ± 0.005 368 7 - 3/4 3/16 7.725 ± 0.045 0.210 ± 0.005
319 1 - 1/16 3/16 1.037 ± 0.010 0.210 ± 0.005 369 8 3/16 7.975 ± 0.045 0.210 ± 0.005
320 1 - 1/8 3/16 1.100 ± 0.012 0.210 ± 0.005 370 8 - 1/4 3/16 8.225 ± 0.050 0.210 ± 0.005
321 1 - 3/16 3/16 1.162 ± 0.012 0.210 ± 0.005 371 8 - 1/2 3/16 8.475 ± 0.050 0.210 ± 0.005
322 1 - 1/4 3/16 1.225 ± 0.012 0.210 ± 0.005 372 8 - 3/4 3/16 8.725 ± 0.050 0.210 ± 0.005
323 1 - 5/16 3/16 1.287 ± 0.012 0.210 ± 0.005 373 9 3/16 8.975 ± 0.050 0.210 ± 0.005
324 1 - 3/8 3/16 1.350 ± 0.012 0.210 ± 0.005 374 9 - 1/4 3/16 9.225 ± 0.055 0.210 ± 0.005
325 1 - 1/2 3/16 1.475 ± 0.015 0.210 ± 0.005 375 9 - 1/2 3/16 9.475 ± 0.055 0.210 ± 0.005
326 1 - 5/8 3/16 1.600 ± 0.015 0.210 ± 0.005 376 9 - 3/4 3/16 9.725 ± 0.055 0.210 ± 0.005
327 1 - 3/4 3/16 1.725 ± 0.015 0.210 ± 0.005 377 10 3/16 9.975 ± 0.055 0.210 ± 0.005
328 1 - 7/8 3/16 1.850 ± 0.015 0.210 ± 0.005 378 10 - 1/2 3/16 10.475 ± 0.060 0.210 ± 0.005
329 2 3/16 1.975 ± 0.018 0.210 ± 0.005 379 11 3/16 10.975 ± 0.060 0.210 ± 0.005
330 2 - 1/8 3/16 2.100 ± 0.018 0.210 ± 0.005 380 11 - 1/2 3/16 11.475 ± 0.065 0.210 ± 0.005
O-Rings
385 16 3/16 15.955 ± 0.075 0.210 ± 0.005 463 17 1/4 16.955 ± 0.080 0.275 ± 0.006
386 17 3/16 16.955 ± 0.080 0.210 ± 0.005 464 17 - 1/2 1/4 17.455 ± 0.085 0.275 ± 0.006
387 18 3/16 17.955 ± 0.085 0.210 ± 0.005 465 18 1/4 17.955 ± 0.085 0.275 ± 0.006
388 19 3/16 18.952 ± 0.090 0.210 ± 0.005 466 18 - 1/2 1/4 18.455 ± 0.085 0.275 ± 0.006
389 20 3/16 19.952 ± 0.095 0.210 ± 0.005 467 19 1/4 18.955 ± 0.090 0.275 ± 0.006
390 21 3/16 20.952 ± 0.095 0.210 ± 0.005 468 19 - 1/2 1/4 19.455 ± 0.090 0.275 ± 0.006
391 22 3/16 21.952 ± 0.100 0.210 ± 0.005 469 20 1/4 19.955 ± 0.095 0.275 ± 0.006
392 23 3/16 22.940 ± 0.105 0.210 ± 0.005 470 21 1/4 20.955 ± 0.095 0.275 ± 0.006
393 24 3/16 23.940 ± 0.110 0.210 ± 0.005 471 22 1/4 21.955 ± 0.100 0.275 ± 0.006
394 25 3/16 24.940 ± 0.115 0.210 ± 0.005 472 23 1/4 22.940 ± 0.105 0.275 ± 0.006
395 26 3/16 25.940 ± 0.120 0.210 ± 0.005 473 24 1/4 23.940 ± 0.110 0.275 ± 0.006
474 25 1/4 24.940 ± 0.115 0.275 ± 0.006
425 4 - 1/2 1/4 4.475 ± 0.033 0.275 ± 0.006 475 26 1/4 25.940 ± 0.120 0.275 ± 0.006
426 4 - 5/8 1/4 4.600 ± 0.033 0.275 ± 0.006
427 4 - 3/4 1/4 4.725 ± 0.033 0.275 ± 0.006
428 4 - 7/8 1/4 4.850 ± 0.033 0.275 ± 0.006
429
430
5
5 - 1/8
1/4
1/4
4.975
5.100
± 0.037
± 0.037
0.275
0.275
± 0.006
± 0.006
ORB Series
431 5 - 1/4 1/4 5.225 ± 0.037 0.275 ± 0.006 Dash Actual Sizing
432 5 - 3/8 1/4 5.350 ± 0.037 0.275 ± 0.006 Number I.D. C/S
433 5 - 1/2 1/4 5.475 ± 0.037 0.275 ± 0.006
901 0.185 ± 0.005 0.056 ± 0.003
434 5 - 5/8 1/4 5.600 ± 0.037 0.275 ± 0.006
902 0.239 ± 0.005 0.064 ± 0.003
435 5 - 3/4 1/4 5.725 ± 0.037 0.275 ± 0.006
903 0.301 ± 0.005 0.064 ± 0.003
436 5 - 7/8 1/4 5.850 ± 0.037 0.275 ± 0.006
904 0.351 ± 0.005 0.072 ± 0.003
437 6 1/4 5.975 ± 0.037 0.275 ± 0.006 905 0.414 ± 0.005 0.072 ± 0.003
438 6 - 1/4 1/4 6.225 ± 0.040 0.275 ± 0.006 906 0.468 ± 0.005 0.078 ± 0.003
439 6 - 1/2 1/4 6.475 ± 0.040 0.275 ± 0.006 907 0.530 ± 0.005 0.082 ± 0.003
440 6 - 3/4 1/4 6.725 ± 0.040 0.275 ± 0.006 908 0.644 ± 0.009 0.087 ± 0.003
441 7 1/4 6.975 ± 0.040 0.275 ± 0.006 909 0.706 ± 0.009 0.097 ± 0.003
442 7 - 1/4 1/4 7.225 ± 0.045 0.275 ± 0.006 910 0.755 ± 0.009 0.097 ± 0.003
443 7 - 1/2 1/4 7.475 ± 0.045 0.275 ± 0.006 911 0.863 ± 0.009 0.116 ± 0.004
444 7 - 3/4 1/4 7.725 ± 0.045 0.275 ± 0.006 912 0.924 ± 0.009 0.116 ± 0.004
445 8 1/4 7.975 ± 0.045 0.275 ± 0.006 913 0.986 ± 0.010 0.116 ± 0.004
446 8 - 1/2 1/4 8.475 ± 0.055 0.275 ± 0.006 914 1.048 ± 0.010 0.116 ± 0.004
447 9 1/4 8.975 ± 0.055 0.275 ± 0.006 916 1.171 ± 0.010 0.116 ± 0.004
448 9 - 1/2 1/4 9.475 ± 0.055 0.275 ± 0.006 918 1.355 ± 0.012 0.116 ± 0.004
449 10 1/4 9.975 ± 0.055 0.275 ± 0.006 920 1.475 ± 0.014 0.118 ± 0.004
450 10 - 1/2 1/4 10.475 ± 0.060 0.275 ± 0.006 924 1.720 ± 0.014 0.118 ± 0.004
451 11 1/4 10.975 ± 0.060 0.275 ± 0.006 928 2.090 ± 0.018 0.118 ± 0.004
452 11 - 1/2 1/4 11.475 ± 0.060 0.275 ± 0.006 932 2.337 ± 0.018 0.118 ± 0.004
453 12 1/4 11.975 ± 0.060 0.275 ± 0.006
454 12 - 1/2 1/4 12.475 ± 0.060 0.275 ± 0.006
455 13 1/4 12.975 ± 0.060 0.275 ± 0.006
Hi-Tech Seals offers O-rings in sizes ranging from 400-425. These
456 13 - 1/2 1/4 13.475 ± 0.070 0.275 ± 0.006
O-ring size dimensions and tolerances are unassigned under ISO
457 14 1/4 13.975 ± 0.070 0.275 ± 0.006 3601. In addition, Hi-Tech Seals stocks specific non-standard cross-
458 14 - 1/2 1/4 14.475 ± 0.070 0.275 ± 0.006 section O-rings such as 3/8”, 1/2” and 3/4”.
Product Description:
O-ring cord is excellent for large diameter static applications. Hi-Tech Seals’ O-ring cord is sold by the foot. Custom O-ring
sizes can be manufactured through our in-house splice and vulcanizing service. For groove information refer to the O-ring
section which begins on page 1.
O-Ring Kits
Highly Saturated Nitrile -40°C to 150°C
Product Description:
Hi-Tech Seals offers O-ring kits in popular materials such as Nitrile, Highly Saturated Nitrile, Viton®/fluorocarbon, EPDM
and Silicone. Standard kits come filled with nearly 350 O-rings in 30 of the most popular imperial sizes, making this an
excellent tool for shops, maintenance workers, or crews out in the field. Hi-Tech Seals also offers BOSS (ORB) kits, ORS
kits, spliced O-ring kit, O-ring board and O-ring warehouse.
Part Numbers:
KIT - ___ ___ ___ ___ ___ ___ ___
Description
Standard Kits
Kits
Part Number: *KIT ORB Part Number: *KIT ORS Part Number: *KIT SPLICING
The O-ring warehouse is an excellent counter top O-ring storage unit. Our standard
stock (KIT WHSE1) is provided equipped with 000 to 400 series O-rings in 70 durometer
Nitrile, with the 900 series O-rings provided in 90 durometer Nitrile.
O-Rings Kits
The O-ring warehouse is also available in a fully 90 durometer Nitrile and a 75 durometer
fluorocarbon.
O-Ring Board
Solid Flat Scarf Cut Spiral Cut Solid Contoured Butt Cut
(27595) (28774) (28782)
Product Description:
Back-up rings are plastic or rubber rings used to prevent the O-ring from entering the clearance gap. When high pressures
are exerted on the O-ring, its soft rubber material can be forced into the clearance gap causing the O-ring to extrude (see
our O-ring brochure for examples of O-ring failure). The hard Back-up ring material will keep the O-ring material from
flowing into the gap which will prevent premature failure. Plastic Back-up rings come in cut styles 27595, 28774, 28782,
which follow the respective MIL specifications.
Part Numbers:
B U ___ - ___ ___ ___ ___ ___ ___ ___ ___
Back-up rings can generally be selected
based on O-ring dash numbers. See
Dash Size* page 2 for dash number dimensions.
N - Nitrile Cut Style for Plastic Back-Ups:
V - Viton® 28774 - Solid Flat
T - PTFE 27595 - Scarf Cut
P - PEEK 28782 - Spiral Cut
H - Hytrel® Blank - Rubber Rings
U - Urethane
Example: BUP - 222 28774 - Dash 222 PEEK scarf cut Back-up ring
T-Seals
EPDM -54°C to 149°C
Product Description:
The T-seal comes in both piston (TPO) and rod (TRO) styles. This double acting seal design can be accommodated by
a standard O-ring groove. The design helps prevent extrusion and spiraling up to 5,000 PSI. Hi-Tech Seals also offers a
locking T-seal profile, which aids in the installation process.
Standard T-seals are composed of a Nitrile sealing element and two split Nylon Back-up rings. A popular combination
for added chemical resistance is our Viton® and PEEK T-seal. If you require assistance choosing the correct T-seal to
replace an O-ring and a Back-up combination, please consult a Hi-Tech Seals’ Technical Sales Representative.
Part Numbers:
___ ___ ___ - ___ ___ ___ ___ ___ ___ ___ ___ ___ ___
Example: TPO - 0875VPEEK - Viton® piston T-seal with PEEK Back-up rings - 7/8” Nom. O.D., 1/8” Nom. C/S
Locking Style
T-Seals
2. Chamfered Back-up ring reduces the possibility that the Back-up ring can be
sheared off in a port or retaining ring groove during assembly.
The locking T-seal style is available for piston T-seals and capped piston T-seals. If you’re having installation issues with your T-seal,
contact Hi-Tech Seals and ask about locking T-seals.
T-Seals
Piston Clearance Limits
Bore Size Range Max. Dia. Clearance B A
0.250” to 0.500” 0.004”
0.501” to 1.750” 0.005”
1.751” to 4.875” 0.007”
4.876” to 9.000” 0.009”
9.001” - up 0.010”
Piston Style
T-Seals
T-Seals
Rod Size Range Max. Dia. Clearance A B
0.123” to 0.375” 0.004”
0.376” to 1.500” 0.005”
1.501” to 4.500” 0.007”
4.501” to 8.500” 0.009”
8.501” - up 0.010”
Energizer Materials:
Nitrile -37°C to 120°C
The Capped T-seal (CTS) is a double-acting, high pressure, high performance piston seal, which is designed to accommodate
large extrusion gaps. The major benefits of this design are its excellent extrusion resistance, low friction and low wear, all
presented in a compact and stable design. The standard Capped T-seal is a four piece seal consisting of a Nitrile energizer,
a 15% glass/5% moly PTFE cap and two Nylon anti-extrusion rings.
Part Numbers:
CTS - ___ ___ ___ ___ ___ ___ ___ ___ ___ CAT* - ___ ___ ___ ___ 4
Example: CTS 2500 - Nitrile energizer, Capped T-seal with a 15% glass/5% moly PTFE cap and two Nylon anti-extrusion
rings - 2 - 1/2” Bore Diameter
Capped T-Seals
E/2
B A
20°
Wipers
PEEK -70°C to 260°C
Hytrel® -54°C to 149°C
Nitrile -40°C to 120°C
DT D DS DX AN
Product Description:
Wipers are primarily designed to stop contaminants from entering a cylinder on the rod, however, they can also act
as a secondary rod seal. If contaminants were allowed to enter the cylinder it could lead to damage of your rod and/
or the damage of other sealing components. A properly selected wiper could help reduce the need for unscheduled
maintenance and even increase the time between maintenance cycles.
It is important to determine the correct style and material for your application. Hi-Tech Seals standard wiper material is
urethane, however, Nitrile, HNBR, Viton®, PEEK and Hytrel® are available. Things that should be considered when selecting
the material of your wiper include: required abrasion resistance, elasticity, resilience and fluid compatibility.
Part Numbers:
W __ __ - ___ ___ ___ ___ ___
Material (if other than Urethane)
Wiper Prefix Rod Diameter (Nominal)
Example: WAN 1250 - Urethane AN-Style Wiper - Gland with 1 - 1/4” Nom. I.D.
DT, D, DS and DX
+0.004
C
-0.000 0.025 R Max.
Wipers
B D
+0.006 +0.010 A DT Wiper - one piece snap-in type rod wiper designed for medium
-0.000 -0.000
duty applications. O.D. lip provides improved O.D. ingression
resistance. RL wiper lip reduces apparent rod seal leakage with
equivalent ingression resistance to a sharp lip wiper.
DT, D, DS and DX are all available in the sizes listed below. WD prefix
most commonly represents Hi-Tech Seals DT style wiper.
Wipers
DT D DS DX
DT, D, DS and DX are all available in the sizes listed below. WD prefix most commonly represents Hi-Tech Seals
DT style wiper. For specific styles or materials please contact Hi-Tech Seals.
WD 5000 5.000 5.747 0.374 5.493 WD 9750 9.750 10.497 0.374 10.243
WD 5125 5.125 5.872 0.374 5.618 WD 10000 10.000 10.997 0.499 10.659
WD 5250 5.250 5.997 0.374 5.743 WD 10250 10.250 11.247 0.499 10.909
WD 5375 5.375 6.122 0.374 5.868 WD 10500 10.500 11.497 0.499 11.159
WD 5500 5.500 6.247 0.374 5.993 WD 10750 10.750 11.747 0.499 11.409
WD 5625 5.625 6.372 0.374 6.118 WD 11000 11.000 11.997 0.499 11.659
WD 5750 5.750 6.497 0.374 6.243 WD 11250 11.250 12.247 0.499 11.909
WD 5875 5.875 6.622 0.374 6.368 WD 11500 11.500 12.497 0.499 12.159
WD 6000 6.000 6.747 0.374 6.493 WD 11750 11.750 12.747 0.499 12.409
WD 6250 6.250 6.997 0.374 6.743 WD 12000 12.000 12.997 0.499 12.659
WD 6500 6.500 7.247 0.374 6.993 WD 12500 12.500 13.497 0.499 13.159
WD 6750 6.250 7.497 0.374 7.243 WD 13000 13.000 13.997 0.499 13.659
WD 7000 7.000 7.747 0.374 7.493
AN-Style
+0.003
C
-0.003 0.025 R Max.
Wipers
B D A
+0.004 +0.005 +0.000
-0.000 -0.000 -0.002 AN Wiper Light duty snap-in wiper that will retrofit
into glands prescribed in MS-3375.
Wipers
(A) (B) (C) (D) (A) (B) (C) (D)
Part Rod Groove Groove Shoulder Part Rod Groove Groove Shoulder
Number Diameter Diameter Width Diameter Number Diameter Diameter Width Diameter
WAN 4375 4.372 4.802 0.138 4.615 WAN 8000 7.997 8.489 0.154 8.272
WAN 4500 4.497 4.927 0.138 4.740 WAN 8250 8.247 8.739 0.154 8.522
WAN 4625 4.622 5.052 0.138 4.865 WAN 8500 8.497 8.989 0.154 8.772
WAN 4750 4.747 5.177 0.138 4.990 WAN 8750 8.747 9.239 0.154 9.022
WAN 4875 4.872 5.302 0.138 5.115 WAN 9000 8.997 9.489 0.154 9.272
WAN 5000 4.997 5.427 0.138 5.240 WAN 9250 9.247 9.739 0.154 9.522
WAN 5125 5.122 5.552 0.138 5.365 WAN 9500 9.497 9.989 0.154 9.772
WAN 5250 5.247 5.677 0.138 5.490 WAN 9750 9.747 10.239 0.154 10.022
WAN 5375 5.372 5.802 0.138 5.615 WAN 10000 9.997 10.489 0.154 10.272
WAN 5500 5.497 5.927 0.138 5.740 WAN 10250 10.247 10.739 0.154 10.522
WAN 5625 5.622 6.114 0.154 5.896 WAN 10500 10.497 10.989 0.154 10.772
WAN 5750 5.747 6.239 0.154 6.022 WAN 10750 10.747 11.239 0.154 11.022
WAN 5875 5.872 6.364 0.154 6.146 WAN 11000 10.997 11.489 0.154 11.272
WAN 6000 5.997 6.489 0.154 6.272 WAN 11250 11.247 11.739 0.169 11.522
WAN 6250 6.247 6.739 0.154 6.522 WAN 11500 11.497 11.989 0.169 11.772
WAN 6500 6.497 6.989 0.154 6.772 WAN 11750 11.747 12.239 0.169 12.022
WAN 6750 6.747 7.239 0.154 7.022 WAN 12000 11.997 12.489 0.169 12.272
WAN 7000 6.997 7.489 0.154 7.272 WAN 12250 12.247 12.739 0.169 12.522
WAN 7250 7.247 7.739 0.154 7.522 WAN 12500 12.497 12.989 0.169 12.772
WAN 7500 7.497 7.989 0.154 7.772 WAN 12750 12.747 13.239 0.169 13.022
WAN 7750 7.747 8.239 0.154 8.022 WAN 13000 12.997 13.489 0.169 13.272
K-Style
+0.015
C
-0.000 0.025 R Max.
Wipers
B D
+0.005 +0.015 A
-0.000 -0.000
K Style Wiper - one piece snap-in type rod wiper
designed for light duty application. Secondary U-Cup.
30°
45 x 1/64 Chamfer
Wipers
B D
H Style Wiper one piece snap-in type rod wiper designed +0.003 +0.003 A
for light duty application. This style also acts as a secondary -0.000 -0.000
H-Style
Wipers
Wipers
B
+0.001 A
Metal Encased Wiper (WC)- Created with a Nitrile (N) or Urethane -0.000
(U) element encased in a high quality steel metal retainer.
The Metal Clad Wipers lip is rigid enough to handle tough scraping
environments such as dry/wet mud and ice, yet sensitive enough to
exclude fine dust and/or moisture.
Metal Encased
Wipers
Metal encased wipers are typically stocked in Nitrile (N) or Urethane (U), however, additional materials and sizes are available.
Loaded U-Cups
Hytrel®/Fluorotrel™ -54°C to 149°C
Loader Materials:
Nitrile 70 Duro. -40°C to 120°C
Part Numbers:
__ __ __ - ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___
* Height is only listed if the axial height
is greater than the cross-section.
C/S I.D. Height*
Prefix: Suffix:
LUC - Urethane/Nitrile Loader Blank - O-Ring Loaded
HSN - Highly Saturated Nitrile/ HSN loader B - O-Ring Loaded, Beveled Lip
VUC - Viton®/ Viton® Loader Q - Quad Loaded
CBX - Carboxylated Nitrile/ Nitrile Loader BQ - Quad Loaded, Beveled Lip
HTL - Hytrel®/ Nitrile Loader Material - if other than described by the prefix
Example: LUC 1250 1062 250 Q - Urethane U-cup with a Quad Nitrile O-ring, 0.125” C/S, 1.062” Nominal I.D. ,
0.250” Height (nominal depth).
A A
Loaded U-Cups
Loaded U-Cups
1/8” 12501125 1/8 0.138
1 - 1/8 1 - 3/8 1.375 1.374 1.125 1.125 1.126 1.375
12501125250 1/4 0.275
12501187 1/8 0.138
1 - 3/16 1 - 7/16 1.437 1.436 1.187 1.187 1.188 1.437
12501187250 1/4 0.275
12501250 1/8 0.138
1 - 1/4 1 - 1/2 1.500 1.499 1.250 1.250 1.251 1.500
12501250250 1/4 0.275
12501312 1/8 0.138
1 - 5/16 1 - 9/16 1.562 1.561 1.312 1.312 1.313 1.562
12501312250 1/4 0.275
12501375 1/8 0.138
1 - 3/8 1 - 5/8 1.625 1.624 1.375 1.375 1.376 1.625
12501375250 1/4 0.275
12501437 1/8 0.138
1 - 7/16 1 - 11/16 1.687 1.686 1.437 1.437 1.438 1.687
12501437250 1/4 0.275
12501500 1/8 0.138
1 - 1/2 1 - 3/4 1.750 1.749 1.500 1.500 1.501 1.750
12501500250 1/4 0.275
12501625 1/8 0.138
1 - 5/8 1 - 7/8 1.875 1.874 1.625 1.625 1.626 1.875
12501625250 1/4 0.275
12501750 1/8 0.138
1 - 3/4 2 2.000 1.999 1.750 1.750 1.751 2.000
12501750250 1/4 0.275
12501875 1/8 0.138
1 - 7/8 2 - 1/8 2.125 2.124 1.875 1.875 1.876 2.125
12501875250 1/4 0.275
12502000 1/8 0.138
2 2 - 1/4 2.250 2.249 2.000 2.000 2.001 2.250
12502000250 1/4 0.275
12502125 1/8 0.138
2 - 1/8 2 - 3/8 2.375 2.374 2.125 2.125 2.126 2.375
12502125250 1/4 0.275
12502250 1/8 0.138
2 - 1/4 2 - 1/2 2.500 2.499 2.250 2.250 2.251 2.500
12502250250 1/4 0.275
12502375 1/8 0.138
2 - 3/8 2 - 5/8 2.625 2.624 2.375 2.375 2.376 2.625
12502375250 1/4 0.275
12502500 1/8 0.138
2 - 1/2 2 - 3/4 2.750 2.749 2.500 2.500 2.501 2.750
12502500250 1/4 0.275
+0.010 +0.002 +0.000 +0.000 +0.000 +0.002 +0.002
Tolerance Limits
-0.000 -0.000 -0.002 -0.002 -0.002 -0.000 -0.000
3/16” 18700187 3/16 0.207
3/16 9/16 0.562 0.561 0.187 0.187 0.188 0.562
18700187312 5/16 0.344
18700250 3/16 0.207
1/4 5/8 0.625 0.624 0.250 0.250 0.251 0.625
18700250312 5/16 0.344
18700312 3/16 0.207
5/16 11/16 0.687 0.686 0.312 0.312 0.313 0.687
18700312312 5/16 0.344
18700375 3/16 0.207
3/8 3/4 0.750 0.749 0.375 0.375 0.376 0.750
18700375312 5/16 0.344
18700437 3/16 0.207
7/16 13/16 0.812 0.811 0.437 0.437 0.438 0.812
18700437312 5/16 0.344
18700500 3/16 0.207
1/2 7/8 0.875 0.874 0.500 0.500 0.501 0.875
18700500312 5/16 0.344
18700562 3/16 0.207
9/16 15/16 0.937 0.936 0.562 0.562 0.563 0.937
18700562312 5/16 0.344
18700625 3/16 0.207
5/8 1 1.000 0.999 0.625 0.625 0.626 1.000
18700625312 5/16 0.344
Loaded U-Cups
3/16” 18702750 3/16 0.207
2 - 3/4 3 - 1/8 3.125 3.124 2.750 2.750 2.751 3.125
18702750375 3/8 0.413
18702875 3/16 0.207
2 - 7/8 3 - 1/4 3.250 3.249 2.875 2.875 2.876 3.250
18702875375 3/8 0.413
18703000 3/16 0.207
3 3 - 3/8 3.375 3.374 3.000 3.000 3.001 3.375
18703000375 3/8 0.413
18703125 3/16 0.207
3 - 1/8 3 - 1/2 3.500 3.499 3.125 3.125 3.126 3.500
18703125375 3/8 0.413
18703250 3/16 0.207
3 - 1/4 3 - 5/8 3.625 3.624 3.250 3.250 3.251 3.625
18703250375 3/8 0.413
18703375 3/16 0.207
3 - 3/8 3 - 3/4 3.750 3.749 3.375 3.375 3.376 3.750
18703375375 3/8 0.413
18703500 3/16 0.207
3 - 1/2 3 - 7/8 3.875 3.874 3.500 3.500 3.501 3.875
18703500375 3/8 0.413
18703625 3/16 0.207
3 - 5/8 4 4.000 3.999 3.625 3.625 3.626 4.000
18703625375 3/8 0.413
18703750 3/16 0.207
3 - 3/4 4 - 1/8 4.125 4.124 3.750 3.750 3.751 4.125
18703750375 3/8 0.413
18703875 3/16 0.207
3 - 7/8 4 - 1/4 4.250 4.249 3.875 3.875 3.876 4.250
18703875375 3/8 0.413
18704000 3/16 0.207
4 4 - 3/8 4.375 4.374 4.000 4.000 4.001 4.375
18704000375 3/8 0.413
18704125 3/16 0.413
4 - 1/8 4 - 1/2 4.500 4.499 4.125 4.125 4.126 4.500
18704125375 3/8 0.207
18704250 3/16 0.413
4 - 1/4 4 - 5/8 4.625 4.624 4.250 4.250 4.251 4.625
18704250375 3/8 0.413
18704375 3/16 0.207
4 - 3/8 4 - 3/4 4.750 4.749 4.375 4.375 4.376 4.750
18704375375 3/8 0.413
18704500 3/16 0.207
4 - 1/2 4 - 7/8 4.875 4.874 4.500 4.500 4.501 4.875
18704500375 3/8 0.413
+0.010 +0.003 +0.000 +0.000 +0.000 +0.003 +0.003
Tolerance Limits
-0.000 -0.000 -0.002 -0.003 -0.002 -0.000 -0.000
1/4” 25000250 1/4 0.275
1/4 3/4 0.750 0.749 0.250 0.250 0.251 0.750
25000250375 3/8 0.413
25000312 1/4 0.275
5/16 13/16 0.812 0.811 0.312 0.312 0.313 0.812
25000312375 3/8 0.413
25000375 1/4 0.275
3/8 7/8 0.875 0.874 0.375 0.375 0.376 0.875
25000375375 3/8 0.413
25000437 1/4 0.275
7/16 15/16 0.937 0.936 0.437 0.437 0.438 0.937
25000437375 3/8 0.413
25000500 1/4 0.275
1/2 1 1.000 0.999 0.500 0.500 0.501 1.000
25000500375 3/8 0.413
25000562 1/4 0.275
9/16 1 - 1/16 1.062 1.061 0.562 0.562 0.563 1.062
25000562375 3/8 0.413
25000625 1/4 0.275
5/8 1 - 1/8 1.125 1.124 0.625 0.625 0.626 1.125
25000625375 3/8 0.413
25000687 1/4 0.275
11/16 1 - 3/16 1.187 1.186 0.687 0.687 0.688 1.187
25000687375 3/8 0.413
Loaded U-Cups
1/4” 25003000 1/4 0.275
3 3 - 1/2 3.500 3.499 3.000 3.000 3.001 3.500
25003000375 3/8 0.413
25003125 1/4 0.275
3 - 1/8 3 - 5/8 3.625 3.624 3.125 3.125 3.126 3.625
25003125375 3/8 0.413
25003250 1/4 0.275
3 - 1/4 3 - 3/4 3.750 3.749 3.250 3.250 3.251 3.750
25003250375 3/8 0.413
25003375 1/4 0.275
3 - 3/8 3 - 7/8 3.875 3.874 3.375 3.375 3.376 3.875
25003375375 3/8 0.413
25003500 1/4 0.275
3 - 1/2 4 4.000 3.999 3.500 3.500 3.501 4.000
25003500375 3/8 0.413
25003625 1/4 0.275
3 - 5/8 4 - 1/8 4.125 4.124 3.625 3.625 3.626 4.125
25003625375 3/8 0.413
25003750 1/4 0.275
3 - 3/4 4 - 1/4 4.250 4.249 3.750 3.750 3.751 4.250
25003750375 3/8 0.413
25004000 1/4 0.275
4 4 - 1/2 4.500 4.499 4.000 4.000 4.001 4.500
25004000562 9/16 0.619
25004125 1/4 0.275
4 - 1/8 4 - 5/8 4.625 4.624 4.125 4.125 4.126 4.625
25004125562 9/16 0.619
25004250 1/4 0.275
4 - 1/4 4 - 3/4 4.750 4.749 4.250 4.250 4.251 4.750
25004250562 9/16 0.619
25004375 1/4 0.275
4 - 3/8 4 - 7/8 4.875 4.874 4.375 4.375 4.376 4.875
25004375562 9/16 0.619
25004500 1/4 0.275
4 - 1/2 5 5.000 4.999 4.500 4.500 4.501 5.000
25004500562 9/16 0.619
25004625 1/4 0.275
4 - 5/8 5 - 1/8 5.125 5.124 4.625 4.625 4.626 5.125
25004625562 9/16 0.619
25004750 1/4 0.275
4 - 3/4 5 - 1/4 5.250 5.249 4.750 4.750 4.751 5.250
25004750562 9/16 0.619
25004875 1/4 0.275
4 - 7/8 5 - 3/8 5.375 5.374 4.875 4.875 4.876 5.375
25004875562 9/16 0.619
25005000 1/4 0.275
5 5 - 1/2 5.500 5.499 5.000 5.000 5.001 5.500
25005000562 9/16 0.619
25005125 1/4 0.275
5 - 1/8 5 - 5/8 5.625 5.624 5.125 5.125 5.126 5.625
25005125562 9/16 0.619
25005250 1/4 0.275
5 - 1/4 5 - 3/4 5.750 5.749 5.250 5.250 5.251 5.750
25005250562 9/16 0.619
25005375 1/4 0.275
5 - 3/8 5 - 7/8 5.875 5.874 5.375 5.375 5.376 5.875
25005375562 9/16 0.619
25005500 1/4 0.275
5 - 1/2 6 6.000 5.999 5.500 5.500 5.501 6.000
25005500562 9/16 0.619
25005625 1/4 0.275
5 - 5/8 6 - 1/8 6.125 6.124 5.625 5.625 5.626 6.125
25005625562 9/16 0.619
25005750 1/4 0.275
5 - 3/4 6 - 1/4 6.250 6.249 5.750 5.750 5.751 6.250
25005750562 9/16 0.619
25005875 1/4 0.275
5 - 7/8 6 - 3/8 6.375 6.374 5.875 5.875 5.876 6.375
25005875562 9/16 0.619
25006000 1/4 0.275
6 6 - 1/2 6.500 6.499 6.000 6.000 6.001 6.500
25006000562 9/16 0.619
Loaded U-Cups
5/16” 31200812 5/16 0.344
13/16 1 - 7/16 1.437 1.435 0.812 0.812 0.814 1.437
31200812500 1/2 0.550
31200875 5/16 0.344
7/8 1 - 1/2 1.500 1.498 0.875 0.875 0.877 1.500
31200875500 1/2 0.550
31200937 5/16 0.344
15/16 1 - 9/16 1.562 1.560 0.937 0.937 0.939 1.562
31200937500 1/2 0.550
31201000 5/16 0.344
1 1 - 5/8 1.625 1.623 1.000 1.000 1.002 1.625
31201000500 1/2 0.550
31201062 5/16 0.344
1 - 1/16 1 -11/16 1.687 1.685 1.062 1.062 1.064 1.687
31201062500 1/2 0.550
31201125 5/16 0.344
1 - 1/8 1 - 3/4 1.750 1.748 1.125 1.125 1.127 1.750
31201125500 1/2 0.550
31201375 5/16 0.344
1 - 3/16 1 -13/16 1.812 1.810 1.187 1.187 1.189 1.812
31201375500 1/2 0.550
31201250 5/16 0.344
1 - 1/4 1 - 7/8 1.875 1.873 1.250 1.250 1.252 1.875
31201250500 1/2 0.550
31201312 5/16 0.344
1 - 5/16 1 -15/16 1.937 1.935 1.312 1.312 1.314 1.937
31201312500 1/2 0.550
31201375 5/16 0.344
1 - 3/8 2 2.000 1.998 1.375 1.375 1.377 2.000
31201375500 1/2 0.550
31201437 5/16 0.344
1 - 7/16 2 - 1/16 2.062 2.060 1.437 1.437 1.439 2.062
31201437500 1/2 0.550
31201500 5/16 0.344
1 - 1/2 2 - 1/8 2.125 2.123 1.500 1.500 1.502 2.125
31201500500 1/2 0.550
31201625 5/16 0.344
1 - 5/8 2 - 1/4 2.250 2.248 1.625 1.625 1.627 2.250
31201625500 1/2 0.550
31201750 5/16 0.344
1 - 3/4 2 - 3/8 2.375 2.373 1.750 1.750 1.752 2.375
31201750500 1/2 0.550
31201875 5/16 0.344
1 - 7/8 2 - 1/2 2.500 2.498 1.875 1.875 1.877 2.500
31201875500 1/2 0.550
31202000 5/16 0.344
2 2 - 5/8 2.625 2.623 2.000 2.000 2.002 2.625
31202000500 1/2 0.550
31202125 5/16 0.344
2 - 1/8 2 - 3/4 2.750 2.748 2.125 2.125 2.127 2.750
31202125500 1/2 0.550
31202250 5/16 0.344
2 - 1/4 2 - 7/8 2.875 2.873 2.250 2.250 2.252 2.875
31202250500 1/2 0.550
31202375 5/16 0.344
2 - 3/8 3 3.000 2.998 2.375 2.375 2.377 3.000
31202375500 1/2 0.550
31202500 5/16 0.344
2 - 1/2 3 - 1/8 3.125 3.123 2.500 2.500 2.502 3.125
31202500500 1/2 0.550
31202625 5/16 0.344
2 - 5/8 3 - 1/4 3.250 3.248 2.625 2.625 2.627 3.250
31202625500 1/2 0.550
31202750 5/16 0.344
2 - 3/4 3 - 3/8 3.375 3.373 2.750 2.750 2.752 3.375
31202750500 1/2 0.550
31202875 5/16 0.344
2 - 7/8 3 - 1/2 3.500 3.498 2.875 2.875 2.877 3.500
31202875500 1/2 0.550
31203000 5/16 0.344
3 3 - 5/8 3.625 3.623 3.000 3.000 3.002 3.625
31203000500 1/2 0.550
Loaded U-Cups
-0.000 -0.000 -0.002 -0.005 -0.002 -0.000 -0.000
3/8” 37504000 3/8 0.413
4 4 - 3/4 4.750 4.748 4.000 4.000 4.002 4.750
37504000625 5/8 0.688
37504125 3/8 0.413
4 - 1/8 4 - 7/8 4.875 4.873 4.125 4.125 4.127 4.875
37504125625 5/8 0.688
37504250 3/8 0.413
4 - 1/4 5 5.000 4.998 4.250 4.250 4.252 5.000
37504250625 5/8 0.688
37504375 3/8 0.413
4 - 3/8 5 - 1/8 5.125 5.123 4.375 4.375 4.377 5.125
37504375625 5/8 0.688
37504500 3/8 0.413
4 - 1/2 5 - 1/4 5.250 5.248 4.500 4.500 4.502 5.250
37504500625 5/8 0.688
37504625 3/8 0.413
4 - 5/8 5 - 3/8 5.375 5.373 4.625 4.625 4.627 5.375
37504625625 5/8 0.688
37504750 3/8 0.413
4 - 3/4 5 - 1/2 5.500 5.498 4.750 4.750 4.752 5.500
37504750625 5/8 0.688
37504875 3/8 0.413
4 - 7/8 5 - 5/8 5.625 5.623 4.875 4.875 4.877 5.625
37504875625 5/8 0.688
37505000 3/8 0.413
5 5 - 3/4 5.750 5.748 5.000 5.000 5.002 5.750
37505000625 5/8 0.688
37505125 3/8 0.413
5 - 1/8 5 - 7/8 5.875 5.873 5.125 5.125 5.127 5.875
37505125625 5/8 0.688
37505250 3/8 0.413
5 - 1/4 6 6.000 5.998 5.250 5.250 5.252 6.000
37505250625 5/8 0.688
37505375 3/8 0.413
5 - 3/8 6 - 1/8 6.125 6.123 5.375 5.375 5.377 6.125
37505375625 5/8 0.688
37505500 3/8 0.413
5 - 1/2 6 - 1/4 6.250 6.248 5.500 5.500 5.502 6.250
37505500625 5/8 0.688
37505625 3/8 0.413
5 - 5/8 6 - 3/8 6.375 6.373 5.625 5.625 5.627 6.375
37505625625 5/8 0.688
37505750 3/8 0.413
5 - 3/4 6 - 1/2 6.500 6.498 5.750 5.750 5.752 6.500
37505750625 5/8 0.688
37505875 3/8 0.413
5 - 7/8 6 - 5/8 6.625 6.623 5.875 5.875 5.877 6.625
37505875625 5/8 0.688
37506000 3/8 0.413
6 6 - 3/4 6.750 6.748 6.000 6.000 6.002 6.750
37506000625 5/8 0.688
37506250 3/8 0.413
6 - 1/4 7 7.000 6.998 6.250 6.250 6.252 7.000
37506250625 5/8 0.688
37506500 3/8 0.413
6 - 1/2 7 - 1/4 7.250 7.248 6.500 6.500 6.502 7.250
37506500625 5/8 0.688
37506750 3/8 0.413
6 - 3/4 7 - 1/2 7.500 7.498 6.750 6.750 6.752 7.500
37506750625 5/8 0.688
37507000 3/8 0.413
7 7 - 3/4 7.750 7.748 7.000 7.000 7.002 7.750
37507000625 5/8 0.688
37507250 3/8 0.413
7 - 1/4 8 8.000 7.998 7.250 7.250 7.252 8.000
37507250625 5/8 0.688
37507500 3/8 0.413
7 - 1/2 8 - 1/4 8.250 8.248 7.500 7.500 7.502 8.250
37507500625 5/8 0.688
37507750 3/8 0.413
7 - 3/4 8 - 1/2 8.500 8.498 7.750 7.750 7.752 8.500
37507750625 5/8 0.688
Loaded U-Cups
1/2” 50002250 1/2 0.550
2 - 1/4 3 - 1/4 3.250 3.248 2.250 2.250 2.252 3.250
50002250750 3/4 0.825
50002375 1/2 0.550
2 - 3/8 3 - 3/8 3.375 3.373 2.375 2.375 2.377 3.375
50002375750 3/4 0.825
50002500 1/2 0.550
2 - 1/2 3 - 1/2 3.500 3.498 2.500 2.500 2.502 3.500
50002500750 3/4 0.825
50002750 1/2 0.550
2 - 3/4 3 - 3/4 3.750 3.748 2.750 2.750 2.752 3.750
50002750750 3/4 0.825
50003000 1/2 0.550
3 4 4.000 3.998 3.000 3.000 3.002 4.000
50003000750 3/4 0.825
50003250 1/2 0.550
3 - 1/4 4 - 1/4 4.250 4.248 3.250 3.250 3.252 4.250
50003250750 3/4 0.825
50003500 1/2 0.550
3 - 1/2 4 - 1/2 4.500 4.498 3.500 3.500 3.502 4.500
50003500750 3/4 0.825
50003750 1/2 0.550
3 - 3/4 4 - 3/4 4.750 4.748 3.750 3.750 3.752 4.750
50003750750 3/4 0.825
50004000 1/2 0.550
4 5 5.000 4.998 4.000 4.000 4.002 5.000
50004000750 3/4 0.825
50004250 1/2 0.550
4 - 1/4 5 - 1/4 5.250 5.248 4.250 4.250 4.252 5.250
50004250750 3/4 0.825
50004375 1/2 0.550
4 - 3/8 5 - 3/8 5.375 5.373 4.375 4.375 4.377 5.375
50004375750 3/4 0.825
50004500 1/2 0.550
4 - 1/2 5 - 1/2 5.500 5.498 4.500 4.500 4.502 5.500
50004500750 3/4 0.825
50004750 1/2 0.550
4 - 3/4 5 - 3/4 5.750 5.748 4.750 4.750 4.752 5.750
50004750750 3/4 0.825
50005000 1/2 0.550
5 6 6.000 5.998 5.000 5.000 5.002 6.000
50005000750 3/4 0.825
50005250 1/2 0.550
5 - 1/4 6 - 1/4 6.250 6.248 5.250 5.250 5.252 6.250
50005250750 3/4 0.825
50005375 1/2 0.550
5 - 3/8 6 - 3/8 6.375 6.373 5.375 5.375 5.377 6.375
50005375750 3/4 0.825
50005500 1/2 0.550
5 - 1/2 6 - 1/2 6.500 6.498 5.500 5.500 5.502 6.500
50005500750 3/4 0.825
50005750 1/2 0.550
5 - 3/4 6 - 3/4 6.750 6.748 5.750 5.750 5.752 6.750
50005750750 3/4 0.825
50006000 1/2 0.550
6 7 7.000 6.998 6.000 6.000 6.002 7.000
50006000750 3/4 0.825
50006250 1/2 0.550
6 - 1/4 7 - 1/4 7.250 7.248 6.250 6.250 6.252 7.250
50006250750 3/4 0.825
50006500 1/2 0.550
6 - 1/2 7 - 1/2 7.500 7.498 6.500 6.500 6.502 7.500
50006500750 3/4 0.825
50006750 1/2 0.550
6 - 3/4 7 - 3/4 7.750 7.748 6.750 6.750 6.752 7.750
50006750750 3/4 0.825
50007000 1/2 0.550
7 8 8.000 7.998 7.000 7.000 7.002 8.000
50007000750 3/4 0.825
50007250 1/2 0.550
7 - 1/4 8 - 1/4 8.250 8.248 7.250 7.250 7.252 8.250
50007250750 3/4 0.825
Loaded U-Cups
5/8” 62501500 5/8 0.688
1 - 1/2 2 - 3/4 2.750 2.747 1.500 1.500 1.503 2.750
62501500100 1 1.100
62501750 5/8 0.688
1 - 3/4 3 3.000 2.997 1.750 1.750 1.753 3.000
62501750100 1 1.100
62502000 5/8 0.688
2 3 - 1/4 3.250 3.247 2.000 2.000 2.003 3.250
62502000100 1 1.100
62502250 5/8 0.688
2 - 1/4 3 - 1/2 3.500 3.497 2.250 2.250 2.253 3.500
62502250100 1 1.100
62502500 5/8 0.688
2 - 1/2 3 - 3/4 3.750 3.747 2.500 2.500 2.503 3.750
62502500100 1 1.100
62502750 5/8 0.688
2 - 3/4 4 4.000 3.997 2.750 2.750 2.753 4.000
62502750100 1 1.100
62503000 5/8 0.688
3 4 - 1/4 4.250 4.247 3.000 3.000 3.003 4.250
62503000100 1 1.100
62503250 5/8 0.688
3 - 1/4 4 - 1/2 4.500 4.497 3.250 3.250 3.253 4.500
62503250100 1 1.100
62503500 5/8 0.688
3 - 1/2 4 - 3/4 4.750 4.747 3.500 3.500 3.503 4.750
62503500100 1 1.100
62503750 5/8 0.688
3 - 3/4 5 5.000 4.997 3.750 3.750 3.753 5.000
62503750100 1 1.100
62504000 5/8 0.688
4 5 - 1/4 5.250 5.247 4.000 4.000 4.003 5.250
62504000100 1 1.100
62504250 5/8 0.688
4 - 1/4 5 - 1/2 5.500 5.497 4.250 4.250 4.253 5.500
62504250100 1 1.100
62504500 5/8 0.688
4 - 1/2 5 - 3/4 5.750 5.747 4.500 4.500 4.503 5.750
62504500100 1 1.100
62504750 5/8 0.688
4 - 3/4 6 6.000 5.997 4.750 4.750 4.753 6.000
62504750100 1 1.100
62505000 5/8 0.688
5 6 - 1/4 6.250 6.247 5.000 5.000 5.003 6.250
62505000100 1 1.100
62505250 5/8 0.688
5 - 1/4 6 - 1/2 6.500 6.497 5.250 5.250 5.253 6.500
62505250100 1 1.100
62505500 5/8 0.688
5 - 1/2 6 - 3/4 6.750 6.747 5.500 5.500 5.503 6.750
62505500100 1 1.100
62505750 5/8 0.688
5 - 3/4 7 7.000 6.997 5.750 5.750 5.753 7.000
62505750100 1 1.100
62506000 5/8 0.688
6 7 - 1/4 7.250 7.247 6.000 6.000 6.003 7.250
62506000100 1 1.100
62506250 5/8 0.688
6 - 1/4 7 - 1/2 7.500 7.497 6.250 6.250 6.253 7.500
62506250100 1 1.100
62506500 5/8 0.688
6 - 1/2 7 - 3/4 7.750 7.747 6.500 6.500 6.503 7.750
62506500100 1 1.100
62506750 5/8 0.688
6 - 3/4 8 8.000 7.997 6.750 6.750 6.753 8.000
62506750100 1 1.100
62507000 5/8 0.688
7 8 - 1/4 8.250 8.247 7.000 7.000 7.003 8.250
62507000100 1 1.100
62507250 5/8 0.688
7 - 1/4 8 - 1/2 8.500 8.497 7.250 7.250 7.253 8.500
62507250100 1 1.100
Loaded U-Cups
5/8” 625013500 5/8 0.688
13 - 1/2 14 - 3/4 14.750 14.747 13.500 13.500 13.503 14.750
625013500100 1 1.100
625013750 5/8 0.688
13 - 3/4 15 15.000 14.997 13.750 13.750 13.753 15.000
625013750100 1 1.100
625014000 5/8 0.688
14 15 - 1/4 15.250 15.247 14.000 14.000 14.003 15.250
625014000100 1 1.100
625014250 5/8 0.688
14 - 1/4 15 - 1/2 15.500 15.497 14.250 14.250 14.253 15.500
625014250100 1 1.100
625014500 5/8 0.688
14 - 1/2 15 - 3/4 15.750 15.747 14.500 14.500 14.503 15.750
625014500100 1 1.100
625014750 5/8 0.688
14 - 3/4 16 16.000 15.997 14.750 14.750 14.753 16.000
625014750100 1 1.100
625015000 5/8 0.688
15 16 - 1/4 16.250 16.247 15.000 15.000 15.003 16.250
625015000100 1 1.100
625015500 5/8 0.688
15 - 1/2 16 - 3/4 16.750 16.747 15.500 15.500 15.503 16.750
625015500100 1 1.100
625016000 5/8 0.688
16 17 - 1/4 17.250 17.247 16.000 16.000 16.003 17.250
625016000100 1 1.100
625016500 5/8 0.688
16 - 1/2 17 - 3/4 17.750 17.747 16.500 16.500 16.503 17.750
625016500100 1 1.100
625017000 5/8 0.688
17 18 - 1/4 18.250 18.247 17.000 17.000 17.003 18.250
625017000100 1 1.100
625017500 5/8 0.688
17 - 1/2 18 - 3/4 18.750 18.747 17.500 17.500 17.503 18.750
625017500100 1 1.100
625018000 5/8 0.688
18 19 - 1/4 19.250 19.247 18.000 18.000 18.003 19.250
625018000100 1 1.100
+0.010 +0.007 +0.000 +0.000 +0.000 +0.007 +0.011
Tolerance Limits
-0.000 -0.000 -0.004 -0.011 -0.004 -0.000 -0.000
3/4” 75003000 3/4 0.825
3 4 - 1/2 4.500 4.497 3.000 3.000 3.003 4.500
75003000125 1 - 1/4 1.375
75003250 3/4 0.825
3 - 1/4 4 - 3/4 4.750 4.747 3.250 3.250 3.253 4.750
75003250125 1 - 1/4 1.375
75003500 3/4 0.825
3 - 1/2 5 5.000 4.997 3.500 3.500 3.503 5.000
75003500125 1 - 1/4 1.375
75003750 3/4 0.825
3 - 3/4 5 - 1/4 5.250 5.247 3.750 3.750 3.753 5.250
75003750125 1 - 1/4 1.375
75004000 3/4 0.825
4 5 - 1/2 5.500 5.497 4.000 4.000 4.003 5.500
75004000125 1 - 1/4 1.375
75004250 3/4 0.825
4 - 1/4 5 - 3/4 5.750 5.747 4.250 4.250 4.253 5.750
75004250125 1 - 1/4 1.375
75004500 3/4 0.825
4 - 1/2 6 6.000 5.997 4.500 4.500 4.503 6.000
75004500125 1 - 1/4 1.375
75004750 3/4 0.825
4 - 3/4 6 - 1/4 6.250 6.247 4.750 4.750 4.753 6.250
75004750125 1 - 1/4 1.375
75005000 3/4 0.825
5 6 - 1/2 6.500 6.497 5.000 5.000 5.003 6.500
75005000125 1 - 1/4 1.375
75005250 3/4 0.825
5 - 1/4 6 - 3/4 6.750 6.747 5.250 5.250 5.253 6.750
75005250125 1 - 1/4 1.375
Loaded U-Cups
3/4” 750013000 3/4 0.825
13 14 - 1/2 14.500 14.497 13.000 13.000 13.003 14.500
750013000125 1 - 1/4 1.375
750013500 3/4 0.825
13 - 1/2 15 15.000 14.997 13.500 13.500 13.503 15.000
750013500125 1 - 1/4 1.375
750014000 3/4 0.825
14 15 - 1/2 15.500 15.497 14.000 14.000 14.003 15.500
750014000125 1 - 1/4 1.375
750014500 3/4 0.825
14 - 1/2 16 16.000 15.997 14.500 14.500 14.503 16.000
750014500125 1 - 1/4 1.375
750015000 3/4 0.825
15 16 - 1/2 16.500 16.497 15.000 15.000 15.003 16.500
750015000125 1 - 1/4 1.375
750015500 3/4 0.825
15 - 1/2 17 17.000 16.997 15.500 15.500 15.503 17.000
750015500125 1 - 1/4 1.375
750016000 3/4 0.825
16 17 - 1/2 17.500 17.497 16.000 16.000 16.003 17.500
750016000125 1 - 1/4 1.375
750016500 3/4 0.825
16 - 1/2 18 18.000 17.997 16.500 16.500 16.503 18.000
750016500125 1 - 1/4 1.375
750017000 3/4 0.825
17 18 - 1/2 18.500 18.497 17.000 17.000 17.003 18.500
750017000125 1 - 1/4 1.375
750017500 3/4 0.825
17 - 1/2 19 19.000 18.997 17.500 17.500 17.503 19.000
750017500125 1 - 1/4 1.375
750018000 3/4 0.825
18 19 - 1/2 19.500 19.497 18.000 18.000 18.003 19.500
750018000125 1 - 1/4 1.375
750018500 3/4 0.825
18 - 1/2 20 20.000 19.997 18.500 18.500 18.503 20.000
750018500125 1 - 1/4 1.375
750019000 3/4 0.825
19 20 - 1/2 20.500 20.497 19.000 19.000 19.003 20.500
750019000125 1 - 1/4 1.375
750019500 3/4 0.825
19 - 1/2 21 21.000 20.997 19.500 19.500 19.503 21.000
750019500125 1 - 1/4 1.375
750020000 3/4 0.825
20 21 - 1/2 21.500 21.497 20.000 20.000 20.003 21.500
750020000125 1 - 1/4 1.375
+0.010 +0.009 +0.000 +0.000 +0.000 +0.009 +0.015
Tolerance Limits
-0.000 -0.000 -0.005 -0.015 -0.005 -0.000 -0.000
1” 10003000 1 1.100
3 5 5.000 4.996 3.000 3.000 3.004 5.000
10003000150 1 - 1/2 1.650
10003500 1 1.100
3 - 1/2 5 - 1/2 5.500 5.496 3.500 3.500 3.504 5.500
10003500150 1 - 1/2 1.650
10004000 1 1.100
4 6 6.000 5.996 4.000 4.000 4.004 6.000
10004000150 1 - 1/2 1.650
10004500 1 1.100
4 - 1/2 6 - 1/2 6.500 6.496 4.500 4.500 4.504 6.500
10004500150 1 - 1/2 1.650
10005000 1 1.100
5 7 7.000 6.996 5.000 5.000 5.004 7.000
10005000150 1 - 1/2 1.650
10005500 1 1.100
5 - 1/2 7 - 1/2 7.500 7.496 5.500 5.500 5.504 7.500
10005500150 1 - 1/2 1.650
10006000 1 1.100
6 8 8.000 7.996 6.000 6.000 6.004 8.000
10006000150 1 - 1/2 1.650
10006500 1 1.100
6 - 1/2 8 - 1/2 8.500 8.496 6.500 6.500 6.504 8.500
10006500150 1 - 1/2 1.650
1” 10007000 1 1.100
7 9 9.000 8.996 7.000 7.000 7.004 9.000
10007000150 1 - 1/2 1.650
10007500 1 1.100
7 - 1/2 9 - 1/2 9.500 9.496 7.500 7.500 7.504 9.500
10007500150 1 - 1/2 1.650
10008000 1 1.100
8 10 10.000 9.996 8.000 8.000 8.004 10.000
10008000150 1 - 1/2 1.650
10008500 1 1.100
8 - 1/2 10 - 1/2 10.500 10.496 8.500 8.500 8.504 10.500
10008500150 1 - 1/2 1.650
10009000 1 1.100
9 11 11.000 10.996 9.000 9.000 9.004 11.000
10009000150 1 - 1/2 1.650
10009500 1 1.100
9 - 1/2 11 - 1/2 11.500 11.496 9.500 9.500 9.504 11.500
10009500150 1 - 1/2 1.650
100010000 1 1.100
10 12 12.000 11.996 10.000 10.000 10.004 12.000
100010000150 1 - 1/2 1.650
100010500 1 1.100
10 - 1/2 12 - 1/2 12.500 12.496 10.500 10.500 10.504 12.500
100010500150 1 - 1/2 1.650
100011000 1 1.100
11 13 13.000 12.996 11.000 11.000 11.004 13.000
100011000150 1 - 1/2 1.650
100011500 1 1.100
11 - 1/2 13 - 1/2 13.500 13.496 11.500 11.500 11.504 13.500
100011500150 1 - 1/2 1.650
100012000 1 1.100
12 14 14.000 13.996 12.000 12.000 12.004 14.000
100012000150 1 - 1/2 1.650
100012500 1 1.100
12 - 1/2 14 - 1/2 14.500 14.496 12.500 12.500 12.504 14.500
100012500150 1 - 1/2 1.650
100013000 1 1.100
13 15 15.000 14.996 13.000 13.000 13.004 15.000
100013000150 1 - 1/2 1.650
100013500 1 1.100
13 - 1/2 15 - 1/2 15.500 15.496 13.500 13.500 13.504 15.500
100013500150 1 - 1/2 1.650
100014000 1 1.100
14 16 16.000 15.996 14.000 14.000 14.004 16.000
100014000150 1 - 1/2 1.650
100014500 1 1.100
14 - 1/2 16 - 1/2 16.500 16.496 14.500 14.500 14.504 16.500
100014500150 1 - 1/2 1.650
100015000 1 1.100
15 17 17.000 16.996 15.000 15.000 15.004 17.000
100015000150 1 - 1/2 1.650
100015500 1 1.100
15 - 1/2 17 - 1/2 17.500 17.496 15.500 15.500 15.504 17.500
100015500150 1 - 1/2 1.650
100016000 1 1.100
16 18 18.000 17.996 16.000 16.000 16.004 18.000
100016000150 1 - 1/2 1.650
100016500 1 1.100
16 - 1/2 18 - 1/2 18.500 18.496 16.500 16.500 16.504 18.500
100016500150 1 - 1/2 1.650
100017000 1 1.100
17 19 19.000 18.996 17.000 17.000 17.004 19.000
100017000150 1 - 1/2 1.650
100017500 1 1.100
17 - 1/2 19 - 1/2 19.500 19.496 17.500 17.500 17.504 19.500
100017500150 1 - 1/2 1.650
100018000 1 1.100
18 20 20.000 19.996 18.000 18.000 18.004 20.000
100018000150 1 - 1/2 1.650
100018500 1 1.100
18 - 1/2 20 - 1/2 20.500 20.496 18.500 18.500 18.504 20.500
100018500150 1 - 1/2 1.650
Loaded U-Cups
1” 100019000 1 1.100
19 21 21.000 20.996 19.000 19.000 19.004 21.000
100019000150 1 - 1/2 1.650
100019500 1 1.100
19 - 1/2 21 - 1/2 21.500 21.496 19.500 19.500 19.504 21.500
100019500150 1 - 1/2 1.650
100020000 1 1.100
20 22 22.000 21.996 20.000 20.000 20.004 22.000
100020000150 1 - 1/2 1.650
100022000 1 1.100
22 24 24.000 23.996 22.000 22.000 22.004 24.000
100022000150 1 - 1/2 1.650
100024000 1 1.100
24 26 26.000 25.996 24.000 24.000 24.004 26.000
100024000150 1 - 1/2 1.650
100026000 1 1.100
26 28 28.000 27.996 26.000 26.000 26.004 28.000
100026000150 1 - 1/2 1.650
100028000 1 1.100
28 30 30.000 29.996 28.000 28.000 28.004 30.000
100028000150 1 - 1/2 1.650
100030000 1 1.100
30 32 32.000 31.996 30.000 30.000 30.004 32.000
100030000150 1 - 1/2 1.650
100032000 1 1.100
32 34 34.000 33.996 32.000 32.000 32.004 34.000
100032000150 1 - 1/2 1.650
Custom sizes available upon request. Please contact a Hi-Tech Seals’ sales representative.
LIP PIP
Product Description:
A Pressure Inverting Pedestal is designed to convert a loaded U-cup into a bi-directional seal for high pressure applications.
The LIP profile is rectangular in shape which makes it compatible with both Quad loaded U-cups and O-ring loaded
U-cups. The PIP ring design is only functional in conjunction with a O-ring loaded U-cup. For gland dimension and design
information please consult Hi-Tech Seals’ sales staff.
PTFE Back-up rings can function as a LIP ring for beveled loaded U-cups in low to medium pressure applications. Consult
a Hi-Tech Seals’ technical sales representative before substituting.
Part Numbers:
___ ___ ___ - ___ ___ ___ ___ ___ ___ ___ ___ ___ ___
Example: PIP 2500 3000 - Urethane PIP Ring - 1/4” C/S, 3” I.D., 3 - 1/2” O.D.
LIP Rings
PIP Style rings are available in the
below sizes and are represented with
the prefix PIP.
Part Number I.D. O.D. C/S Part Number I.D. O.D. C/S Part Number I.D. O.D. C/S
LIP 12500437 7/16 11/16 1/8 LIP 25001937 1 - 15/16 2 - 7/16 1/4 LIP 37504750 4 - 3/4 5 - 1/2 3/8
LIP 12500500 1/2 3/4 1/8 LIP 25002000 2 2 - 1/2 1/4 LIP 37505250 5 - 1/4 6 3/8
LIP 12500750 3/4 1 1/8 LIP 25002250 2 - 1/4 2 - 3/4 1/4 LIP 37505500 5 - 1/2 6 - 1/4 3/8
LIP 12501000 1 1 - 1/4 1/8 LIP 25002500 2 - 1/2 3 1/4 LIP 37505750 5 - 3/4 6 - 1/2 3/8
LIP 12501125 1 - 1/8 1 - 3/8 1/8 LIP 25002750 2 - 3/4 3 - 1/4 1/4 LIP 37506250 6 - 1/4 7 3/8
LIP 12501250 1 - 1/4 1 - 1/2 1/8 LIP 25002875 2 - 7/8 3 - 3/8 1/4 LIP 37506750 6 - 3/4 7 - 1/2 3/8
LIP 12501500 1 - 1/2 1 - 3/4 1/8 LIP 25003000 3 3 - 1/2 1/4 LIP 37507250 7 - 1/4 8 3/8
LIP 12501750 1 - 3/4 2 1/8 LIP 25003250 3 - 1/4 3 - 3/4 1/4 LIP 37508250 8 - 1/4 9 3/8
LIP 12502000 2 2 - 1/4 1/8 LIP 25003500 3 - 1/2 4 1/4 LIP 37508500 8 - 1/2 9 - 1/4 3/8
LIP 18700625 5/8 1 3/16 LIP 25003750 3 - 3/4 4 - 1/4 1/4 LIP 37508750 8 - 3/4 9 - 1/2 3/8
LIP 18700750 3/4 1 - 1/8 3/16 LIP 25004000 4 4 - 1/2 1/4 LIP 375014250 14 - 1/4 15 3/8
LIP 18700875 7/8 1 - 1/4 3/16 LIP 25004250 4 - 1/4 4 - 3/4 1/4 LIP 375019250 19 - 1/4 20 3/8
LIP 18700937 15/16 1 - 5/16 3/16 LIP 25004500 4 - 1/2 5 1/4 LIP 50003500 3 - 1/2 4 - 1/2 1/2
LIP 18701000 1 1 - 3/8 3/16 LIP 25005000 5 5 - 1/2 1/4 LIP 50004000 4 5 1/2
LIP 18701125 1 - 1/8 1 - 1/2 3/16 LIP 25005250 5 - 1/4 5 - 3/4 1/4 LIP 50005000 5 6 1/2
LIP 18701250 1 - 1/4 1 - 5/8 3/16 LIP 25005500 5 - 1/2 6 1/4 LIP 50005250 5 - 1/4 6 - 1/4 1/2
LIP 18701375 1 - 3/8 1 - 3/4 3/16 LIP 25006000 6 6 - 1/2 1/4 LIP 50006000 6 7 1/2
LIP 18701500 1 - 1/2 1 - 7/8 3/16 LIP 25006500 6 - 1/2 7 1/4 LIP 50007000 7 8 1/2
LIP 18701625 1 - 5/8 2 3/16 LIP 25007000 7 7 - 1/2 1/4 LIP 50008000 8 9 1/2
LIP 18701750 1 - 3/4 2 - 1/8 3/16 LIP 31201875 1 - 7/8 2 - 1/2 5/16 LIP 50009000 9 10 1/2
LIP 18702000 2 2 - 3/8 3/16 LIP 31202375 2 - 3/8 3 5/16 LIP 50009500 9 - 1/2 10 - 1/2 1/2
LIP 18702375 2 - 3/8 2 - 3/4 3/16 LIP 31203375 3 - 3/8 4 5/16 LIP 500011000 11 12 1/2
LIP 18702500 2 - 1/2 2 - 7/8 3/16 LIP 31204375 4 - 3/8 5 5/16 LIP 500011875 11 - 7/8 12 - 7/8 1/2
LIP 18702625 2 - 5/8 3 3/16 LIP 31204500 4 - 1/2 5 - 1/8 5/16 LIP 500014000 14 15 1/2
LIP 18702750 2 - 3/4 3 - 1/8 3/16 LIP 31205500 5 - 1/2 6 - 1/8 5/16 LIP 500015000 15 16 1/2
LIP 18703000 3 3 - 3/8 3/16 LIP 31206375 6 - 3/8 7 5/16 LIP 500019000 19 20 1/2
LIP 18703125 3 - 1/8 3 - 1/2 3/16 LIP 37502000 2 2 - 3/4 3/8 LIP 500020000 20 21 1/2
LIP 18703250 3 - 1/4 3 - 5/8 3/16 LIP 37502250 2 - 1/4 3 3/8 LIP 500020250 20 - 1/4 21 - 1/4 1/2
LIP 18703375 3 - 3/8 3 - 3/4 3/16 LIP 37502500 2 - 1/2 3 - 1/4 3/8 LIP 500021000 21 22 1/2
LIP 18703625 3 - 5/8 4 3/16 LIP 37502750 2 - 3/4 3 - 1/2 3/8 LIP 500024500 24 - 1/2 25 - 1/2 1/2
LIP 18704000 4 4 - 3/8 3/16 LIP 37503250 3 - 1/4 4 3/8 LIP 500026500 26 - 1/2 27 - 1/2 1/2
LIP 25001000 1 1 - 1/2 1/4 LIP 37503500 3 - 1/2 4 - 1/4 3/8 LIP 62507000 7 8 - 1/4 5/8
LIP 25001250 1 - 1/4 1 - 3/4 1/4 LIP 37503750 3 - 3/4 4 - 1/2 3/8 LIP 62507250 7 - 1/4 8 - 1/2 5/8
LIP 25001500 1 - 1/2 2 1/4 LIP 37504000 4 4 - 3/4 3/8 LIP 62507500 7 - 1/2 8 - 3/4 5/8
LIP 25001750 1 - 3/4 2 - 1/4 1/4 LIP 37504250 4 - 1/4 5 3/8
Base Materials:
Z-Seals
Product Description:
The Z-seal is a squeeze type seal primarily used for heavy-duty rod applications. This seal combines excellent sealability,
low compression set and superior anti-extrusion characteristics when compared to other lip seals. Under low-pressure
conditions, the sealing lip provides its own compressive seal force. As the pressure increases, hydrostatic pressure is
mechanically transmitted through the elastomer seal element into the anti-extrusion base. The applied force then deflects
radially in a controlled manner, closing the extrusion gap behind the sealing lip.
The various Z-seal configurations are designed to accommodate standard groove dimensions with normal manufacturing
tolerances. Z-seals fit into standard deep loaded U-cup glands. For groove dimensions please reference the loaded U-cup
section, starting on page 31.
Z-seal part numbers are based on a Nitrile sealing lip and Urethane base. Parts containing a different material use a suffix
to represent the used material.
Part Numbers:
Z - ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___
Example: Z 5000 3000 750 D - Urethane base/Nitrile seal lip Deep Z-Seal - 1/2” C/S, 3” I.D., 3/4” Height
Height
Z-Seals
Part Nominal Part Nominal
C/S Number I.D. O.D. Height C/S Number I.D. O.D. Height
1/8” Z 12500125250 1/8 3/8 1/4 3/16" Z 18700437312 7/16 13/16 5/16
Z 12500187250 3/16 7/16 1/4 Z 18700500312 1/2 7/8 5/16
Z 12500250250 1/4 1/2 1/4 Z 18700562312 9/16 15/16 5/16
Z 12500312250 5/16 9/16 1/4 Z 18700625312 5/8 1 5/16
Z 12500375250 3/8 5/8 1/4 Z 18700687312 11/16 1 - 1/16 5/16
Z 12500437250 7/16 11/16 1/4 Z 18700750312 3/4 1 - 1/8 5/16
Z 12500500250 1/2 3/4 1/4 Z 18700812312 13/16 1 - 3/16 5/16
Z 12500562250 9/16 13/16 1/4 Z 18700875312 7/8 1 - 1/4 5/16
Z 12500625250 5/8 7/8 1/4 Z 18700937312 15/16 1 - 5/16 5/16
Z 12500687250 11/16 15/16 1/4 Z 18701000312 1 1 - 3/8 5/16
Z 12500750250 3/4 1 1/4 Z 18701062312 1 - 1/16 1 - 7/16 5/16
Z 12500812250 13/16 1 - 1/16 1/4 Z 18701125312 1 - 1/8 1 - 1/2 5/16
Z 12500875250 7/8 1 - 1/8 1/4 Z 18701187312 1 - 3/16 1 - 9/16 5/16
Z 12500937250 15/16 1 - 3/16 1/4 Z 18701250312 1 - 1/4 1 - 5/8 5/16
Z 12501000250 1 1 - 1/4 1/4 Z 18701312312 1 - 5/16 1 -11/16 5/16
Z 12501062250 1 - 1/16 1 - 5/16 1/4 Z 18701375312 1 - 3/8 1 - 3/4 5/16
Z 12501125250 1 - 1/8 1 - 3/8 1/4 Z 18701437312 1 - 7/16 1 -13/16 5/16
Z 12501187250 1 - 3/16 1 - 7/16 1/4 Z 18701500375 1 - 1/2 1 - 7/8 3/8
Z 12501250250 1 - 1/4 1 - 1/2 1/4 Z 18701625375 1 - 5/8 2 3/8
Z 12501312250 1 - 5/16 1 - 9/16 1/4 Z 18701687375 1 -11/16 2 - 1/16 3/8
Z 12501375250 1 - 3/8 1 - 5/8 1/4 Z 18701750375 1 - 3/4 2 - 1/8 3/8
Z 12501437250 1 - 7/16 1 -11/16 1/4 Z 18701875375 1 - 7/8 2 - 1/4 3/8
Z 12501500250 1 - 1/2 1 - 3/4 1/4 Z 18702000375 2 2 - 3/8 3/8
Z 12501625250 1 - 5/8 1 - 7/8 1/4 Z 18702125375 2 - 1/8 2 - 1/2 3/8
Z 12501750250 1 - 3/4 2 1/4 Z 18702250375 2 - 1/4 2 - 5/8 3/8
Z 12501875250 1 - 7/8 2 - 1/8 1/4 Z 18702375375 2 - 3/8 2 - 3/4 3/8
Z 12502000250 2 2 - 1/4 1/4 Z 18702500375 2 - 1/2 2 - 7/8 3/8
Z 12502125250 2 - 1/8 2 - 3/8 1/4 Z 18702625375 2 - 5/8 3 3/8
Z 12502250250 2 - 1/4 2 - 1/2 1/4 Z 18702750375 2 - 3/4 3 - 1/8 3/8
Z 12502375250 2 - 3/8 2 - 5/8 1/4 Z 18702875375 2 - 7/8 3 - 1/4 3/8
Z 12502500250 2 - 1/2 2 - 3/4 1/4 Z 18703000375 3 3 - 3/8 3/8
3/16" Z 18700187312 3/16 9/16 5/16 Z 18703125375 3 - 1/8 3 - 1/2 3/8
Z 18700250312 1/4 5/8 5/16 Z 18703250375 3 - 1/4 3 - 5/8 3/8
Z 18700312312 5/16 11/16 5/16 Z 18703375375 3 - 3/8 3 - 3/4 3/8
Z 18700375312 3/8 3/4 5/16 Z 18703500375 3 - 1/2 3 - 7/8 3/8
Z-Seals
Z 31201125500 1 - 1/8 1 - 3/4 1/2 Z 31206125625 6 - 1/8 6 - 3/4 5/8
Z 31201187500 1 - 3/16 1 -13/16 1/2 Z 31206250625 6 - 1/4 6 - 7/8 5/8
Z 31201250500 1 - 1/4 1 - 7/8 1/2 Z 31206375625 6 - 3/8 7 5/8
Z 31201312500 1 - 5/16 1 -15/16 1/2 Z 31206500625 6 - 1/2 7 - 1/8 5/8
Z 31201375500 1 - 3/8 2 1/2 Z 31206625625 6 - 5/8 7 - 1/4 5/8
Z 31201437500 1 - 7/16 2 - 1/16 1/2 Z 31206750625 6 - 3/4 7 - 3/8 5/8
Z 31201500500 1 - 1/2 2 - 1/8 1/2 Z 31206875625 6 - 7/8 7 - 1/2 5/8
Z 31201625500 1 - 5/8 2 - 1/4 1/2 Z 31207000625 7 7 - 5/8 5/8
Z 31201750500 1 - 3/4 2 - 3/8 1/2 Z 31207125625 7 - 1/8 7 - 3/4 5/8
Z 31201875500 1 - 7/8 2 - 1/2 1/2 Z 31207250625 7 - 1/4 7 - 7/8 5/8
Z 31202000500 2 2 - 5/8 1/2 Z 31207375625 7 - 3/8 8 5/8
Z 31202125500 2 - 1/8 2 - 3/4 1/2 3/8” Z 37500500625 1/2 1 - 1/4 5/8
Z 31202250500 2 - 1/4 2 - 7/8 1/2 Z 37500562625 9/16 1 - 5/16 5/8
Z 31202375500 2 - 3/8 3 1/2 Z 37500625625 5/8 1 - 3/8 5/8
Z 31202500500 2 - 1/2 3 - 1/8 1/2 Z 37500687625 11/16 1 - 7/16 5/8
Z 31202625500 2 - 5/8 3 - 1/4 1/2 Z 37500750625 3/4 1 - 1/2 5/8
Z 31202750500 2 - 3/4 3 - 3/8 1/2 Z 37500812625 13/16 1 - 9/16 5/8
Z 31202875500 2 - 7/8 3 - 1/2 1/2 Z 37500875625 7/8 1 - 5/8 5/8
Z 31203000500 3 3 - 5/8 1/2 Z 37500937625 15/16 1 -11/16 5/8
Z 31203125500 3 - 1/8 3 - 3/4 1/2 Z 37501000625 1 1 - 3/4 5/8
Z 31203250500 3 - 1/4 3 - 7/8 1/2 Z 37501062625 1 - 1/16 1 -13/16 5/8
Z 31203375500 3 - 3/8 4 1/2 Z 37501125625 1 - 1/8 1 - 7/8 5/8
Z 31203500500 3 - 1/2 4 - 1/8 1/2 Z 37501187625 1 - 3/16 1 -15/16 5/8
Z 31203625500 3 - 5/8 4 - 1/4 1/2 Z 37501250625 1 - 1/4 2 5/8
Z 31203750500 3 - 3/4 4 - 3/8 1/2 Z 37501312625 1 - 5/16 2 - 1/16 5/8
Z 31203875500 3 - 7/8 4 - 1/2 1/2 Z 37501375625 1 - 3/8 2 - 1/8 5/8
Z 31204000562 4 4 - 5/8 9/16 Z 37501437625 1 - 7/16 2 - 3/16 5/8
Z 31204125562 4 - 1/8 4 - 3/4 9/16 Z 37501500625 1 - 1/2 2 - 1/4 5/8
Z 31204250562 4 - 1/4 4 - 7/8 9/16 Z 37501625625 1 - 5/8 2 - 3/8 5/8
Z 31204375562 4 - 3/8 5 9/16 Z 37501750625 1 - 3/4 2 - 1/2 5/8
Z 31204500625 4 - 1/2 5 - 1/8 5/8 Z 37501875625 1 - 7/8 2 - 5/8 5/8
Z 31204625625 4 - 5/8 5 - 1/4 5/8 Z 37502000625 2 2 - 3/4 5/8
Z 31204750625 4 - 3/4 5 - 3/8 5/8 Z 37502125625 2 - 1/8 2 - 7/8 5/8
Z 31204875625 4 - 7/8 5 - 1/2 5/8 Z 37502250625 2 - 1/4 3 5/8
Z 31205000625 5 5 - 5/8 5/8 Z 37502375625 2 - 3/8 3 - 1/8 5/8
Z 31205125625 5 - 1/8 5 - 3/4 5/8 Z 37502500625 2 - 1/2 3 - 1/4 5/8
Z 31205250625 5 - 1/4 5 - 7/8 5/8 Z 37502625625 2 - 5/8 3 - 3/8 5/8
Z 31205375625 5 - 3/8 6 5/8 Z 37502750625 2 - 3/4 3 - 1/2 5/8
Z 31205500625 5 - 1/2 6 - 1/8 5/8 Z 37502875625 2 - 7/8 3 - 5/8 5/8
Z 31205625625 5 - 5/8 6 - 1/4 5/8 Z 37503000625 3 3 - 3/4 5/8
Z-Seals
Z 500010500750 10 - 1/2 11 - 1/2 3/4 Z 62509250100 9 - 1/4 10 - 1/2 1
Z 500011000750 11 12 3/4 Z 62509500100 9 - 1/2 10 - 3/4 1
Z 500011500750 11 - 1/2 12 - 1/2 3/4 Z 62509750100 9 - 3/4 11 1
Z 500012000750 12 13 3/4 Z 625010000100 10 11 - 1/4 1
Z 500012500750 12 - 1/2 13 - 1/2 3/4 Z 625010250100 10 - 1/4 11 - 1/2 1
Z 500013000750 13 14 3/4 Z 625010500100 10 - 1/2 11 - 3/4 1
Z 500013500750 13 - 1/2 14 - 1/2 3/4 Z 625010750100 10 - 3/4 12 1
Z 500014000750 14 15 3/4 Z 625011000100 11 12 - 1/4 1
Z 500014500750 14 - 1/2 15 - 1/2 3/4 Z 625011250100 11 - 1/4 12 - 1/2 1
Z 500015000750 15 16 3/4 Z 625011500100 11 - 1/2 12 - 3/4 1
5/8” Z 62501250100 1 - 1/4 2 - 1/2 1 Z 625011750100 11 - 3/4 13 1
Z 62501375100 1 - 3/8 2 - 5/8 1 Z 625012000100 12 13 - 1/4 1
Z 62501500100 1 - 1/2 2 - 3/4 1 Z 625012250100 12 - 1/4 13 - 1/2 1
Z 62501750100 1 - 3/4 3 1 Z 625012500100 12 - 1/2 13 - 3/4 1
Z 62502000100 2 3 - 1/4 1 Z 625012750100 12 - 3/4 14 1
Z 62502250100 2 - 1/4 3 - 1/2 1 Z 625013000100 13 14 - 1/4 1
Z 62502500100 2 - 1/2 3 - 3/4 1 Z 625013250100 13 - 1/4 14 - 1/2 1
Z 62502750100 2 - 3/4 4 1 Z 625013500100 13 - 1/2 14 - 3/4 1
Z 62503000100 3 4 - 1/4 1 Z 625013750100 13 - 3/4 15 1
Z 62503250100 3 - 1/4 4 - 1/2 1 Z 625014000100 14 15 - 1/4 1
Z 62503500100 3 - 1/2 4 - 3/4 1 Z 625014250100 14 - 1/4 15 - 1/2 1
Z 62503750100 3 - 3/4 5 1 Z 625014500100 14 - 1/2 15 - 3/4 1
Z 62504000100 4 5 - 1/4 1 Z 625014750100 14 - 3/4 16 1
Z 62504250100 4 - 1/4 5 - 1/2 1 Z 625015000100 15 16 - 1/4 1
Z 62504500100 4 - 1/2 5 - 3/4 1 Z 625015500100 15 - 1/2 16 - 3/4 1
Z 62504750100 4 - 3/4 6 1 Z 625016000100 16 17 - 1/4 1
Z 62505000100 5 6 - 1/4 1 Z 625016500100 16 - 1/2 17 - 3/4 1
Z 62505250100 5 - 1/4 6 - 1/2 1 Z 625017000100 17 18 - 1/4 1
Z 62505500100 5 - 1/2 6 - 3/4 1 Z 625017500100 17 - 1/2 18 - 3/4 1
Z 62505750100 5 - 3/4 7 1 Z 625018000100 18 19 - 1/4 1
Z 62506000100 6 7 - 1/4 1 3/4” Z 75003000125 3 4 - 1/2 1 - 1/4
Z 62506250100 6 - 1/4 7 - 1/2 1 Z 75003250125 3 - 1/4 4 - 3/4 1 - 1/4
Z 62506500100 6 - 1/2 7 - 3/4 1 Z 75003500125 3 - 1/2 5 1 - 1/4
Z 62506750100 6 - 3/4 8 1 Z 75003750125 3 - 3/4 5 - 1/4 1 - 1/4
Z 62507000100 7 8 - 1/4 1 Z 75004000125 4 5 - 1/2 1 - 1/4
Z 62507250100 7 - 1/4 8 - 1/2 1 Z 75004250125 4 - 1/4 5 - 3/4 1 - 1/4
Z 62507500100 7 - 1/2 8 - 3/4 1 Z 75004500125 4 - 1/2 6 1 - 1/4
Z 62507750100 7 - 3/4 9 1 Z 75004750125 4 - 3/4 6 - 1/4 1 - 1/4
Z 62508000100 8 9 - 1/4 1 Z 75005000125 5 6 - 1/2 1 - 1/4
Z 62508250100 8 - 1/4 9 - 1/2 1 Z 75005250125 5 - 1/4 6 - 3/4 1 - 1/4
Homogenous U-Cups
Material: Temp. Range
Nitrile -40°C to 120°C
Viton®/Fluorocarbon -26°C to 204°C
Product Description:
Homogenous U-cups (block vees) are a non-loaded, single material U-cup. The HU seal is popular in low pressure
applications where a low friction seal would be beneficial. The seal is most commonly used in pneumatic applications
as a rod or piston seal. The design is suited for situations where space is limited. The HU seal is typically made from an 80
durometer Nitrile but also comes in Viton®/fluorocarbon, Neoprene and other homogenous materials.
As pressure is applied to the homogenous U-cup the seal experiences an increase in sealing force until it reaches the
maximum pressure the seal can handle. Homogeneous U-cup seals can handle up to 500 PSI; however, if you have
applications that require higher pressure capabilities please consult a Hi-Tech Seals’ sales representative.
Part Numbers:
HU ___ - ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ Height is only listed if the axial height is greater
than the cross-section.
I.D. O.D. Height*
Blank - Nitrile
V - Viton®
N - Neoprene
Example: HU - 0437 0688 - Nitrile Homogenous U-Cup - 7/16” Nom. I.D., 11/16” Nom. O.D.
Groove Width
Homogenous U-Cups
Groove Width
C D A
C B A
A B C D
Homogenous U-Cups
HU 04370688 7/16 11/16 1/8 HU 11871500 1 - 3/16 1 - 1/2 5/32
HU 04370812 7/16 13/16 3/16 HU 11871687 1 - 3/16 1 -11/16 1/4
HU 04370937 7/16 15/16 1/4 HU 12501500 1 - 1/4 1 - 1/2 1/8
HU 05000625 1/2 5/8 1/16 HU 12501562 1 - 1/4 1 - 9/16 5/32
HU 05000687 1/2 11/16 3/32 HU 12501625 1 - 1/4 1 - 5/8 3/16
HU 05000750 1/2 3/4 1/8 HU 12501750 1 - 1/4 1 - 3/4 1/4
HU 05000812 1/2 13/16 5/32 HU 13121562 1 - 5/16 1 - 9/16 1/8
HU 05000875 1/2 7/8 3/16 HU 13121625 1 - 5/16 1 - 5/8 5/32
HU 05001000 1/2 1 1/4 HU 13751625 1 - 3/8 1 - 5/8 1/8
HU 05620750 9/16 3/4 3/32 HU 13751688 1 - 3/8 1 -11/16 5/32
HU 05620813 9/16 13/16 1/8 HU 13751750 1 - 3/8 1 - 3/4 3/16
HU 05621062 9/16 1 - 1/16 1/4 HU 14371750 1 - 7/16 1 - 3/4 5/32
HU 05930844 19/32 27/32 1/8 HU 15001750 1 - 1/2 1 - 3/4 1/8
HU 06250813 5/8 13/16 3/32 HU 15001812 1 - 1/2 1 -13/16 5/32
HU 06250875 5/8 7/8 1/8 HU 15001875 1 - 1/2 1 - 7/8 3/16
HU 06251000 5/8 1 3/16 HU 16251812 1 - 5/8 1 -13/16 3/32
HU 06251125 5/8 1 - 1/8 1/4 HU 16251875 1 - 5/8 1 - 7/8 1/8
HU 06870875 11/16 7/8 3/32 HU 16251937 1 - 5/8 1 -15/16 5/32
HU 06870937 11/16 15/16 1/8 HU 16252000 1 - 5/8 2 3/16
HU 06871062 11/16 1 - 1/16 3/16 HU 17502000 1 - 3/4 2 1/8
HU 06871187 11/16 1 - 3/16 1/4 HU 17502062 1 - 3/4 2 - 1/16 5/32
HU 07500937 3/4 15/16 3/32 HU 17502125 1 - 3/4 2 - 1/8 3/16
HU 07501000 3/4 1 1/8 HU 18752250 1 - 7/8 2 - 1/4 3/16
HU 07501125 3/4 1 - 1/8 3/16 HU 20002250 2 2 - 1/4 1/8
HU 07501250 3/4 1 - 1/4 1/4 HU 20002375 2 2 - 3/8 3/16
HU 08121000 13/16 1 3/32 HU 21252500 2 - 1/8 2 - 1/2 3/16
HU 08121062 13/16 1 - 1/16 1/8 HU 22502625 2 - 1/4 2 - 5/8 3/16
HU 08121125 13/16 1 - 1/8 5/32 HU 23752750 2 - 3/8 2 - 3/4 3/16
HU 08121312 13/16 1 - 5/16 1/4 HU 25002875 2 - 1/2 2 - 7/8 3/16
HU 08751000 7/8 1 1/16 HU 25002937 2 - 1/2 2 -15/16 7/32
HU 08751062 7/8 1 - 1/16 3/32 HU 25623000 2 - 9/16 3 7/32
HU 08751125 7/8 1 - 1/8 1/8 HU 26253000 2 - 5/8 3 3/16
HU 08751187 7/8 1 - 3/16 5/32 HU 26873125 2 -11/16 3 - 1/8 7/32
HU 08751250 7/8 1 - 1/4 3/16 HU 27503125 2 - 3/4 3 - 1/8 3/16
HU 08751375 7/8 1 - 3/8 1/4 HU 27503187 2 - 3/4 3 - 3/16 7/32
HU 09371187 15/16 1 - 3/16 1/8 HU 28123250 2 -13/16 3 - 1/4 7/32
HU 09371250 15/16 1 - 1/4 5/32 HU 28753250 2 - 7/8 3 - 1/4 3/16
HU 09371437 15/16 1 - 7/16 1/4 HU 30003375 3 3 - 3/8 3/16
HU 10001187 1 1 - 3/16 3/32 HU 30003437 3 3 - 7/16 7/32
HU 10001250 1 1 - 1/4 1/8 HU 30623500 3 - 1/16 3 - 1/2 7/32
HU 10001312 1 1 - 5/16 5/32 HU 31253500 3 - 1/8 3 - 1/2 3/16
HU 10001375 1 1 - 3/8 3/16 HU 32503625 3 - 1/4 3 - 5/8 3/16
HU 10001500 1 1 - 1/2 1/4 HU 33123750 3 - 5/16 3 - 3/4 7/32
HU 10621375 1 - 1/16 1 - 3/8 5/32 HU 33753750 3 - 3/8 3 - 3/4 3/16
HU 10621562 1 - 1/16 1 - 9/16 1/4 HU 35003875 3 - 1/2 3 - 7/8 3/16
HU 11251375 1 - 1/8 1 - 3/8 1/8 HU 35624000 3 - 9/16 4 7/32
HU 11251437 1 - 1/8 1 - 7/16 5/32 HU 36254000 3 - 5/8 4 3/16
HU 11251500 1 - 1/8 1 - 1/2 3/16 HU 47505000 4 - 3/4 5 1/8
HU 11251625 1 - 1/8 1 - 5/8 1/4 HU 62506500 6 - 1/4 6 - 1/2 1/8
HU 11871437 1 - 3/16 1 - 7/16 1/8
Product Description:
The urethane U-cup design provides an excellent heavy duty seal for either piston or rod applications. Urethane U-cups
work well in both static and dynamic applications.
Symmetrical, rod and piston styles are available in a range of sizes. The non-symmetric styles provide the added benefits
of: reduced seal movement, added stability in static applications and protection of the dynamic lip during installation.
The rod style provides improved sealability on the I.D., well the piston style provides improved sealability on the O.D.
Part Numbers:
___ ___ - ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___
Example: RO - 1870 0625 375 DL - Rod Style - Urethane - 3/16” C/S, 5/8” I.D., 3/8” Height
Urethane U-Cups
Urethane U-cups fit into standard deep loaded U-cup glands. Height
For groove dimensions please reference to the loaded U-cup
section, which starts on page 31.
Rod Style
Nominal Seal Nominal Seal
Part Number C/S I.D. Height Part Number C/S I.D. Height
Urethane U-Cups
Symmetrical
Urethane U-Cups
Urethane U-cups fit into standard deep loaded U-cup glands. For groove dimensions please
reference the loaded U-cup section, which starts on page 31.
Custom sizes are available through Hi-Tech Seals, please contact a sales representative with your desired size.
SpectraSeals® are engineered plastic seals which incorporates a metallic spring. The spring loads the seal lips against the
mating hardware, creating a seal capable of compensating for movement in dynamic applications. The spring provides
the necessary lip squeeze to compensate for movement in dynamic applications. SpectraSeals® are normally used in
single acting dynamic applications and should be oriented with the spring cavity towards the pressure side. Pressure
from the media being sealed provides additional sealing force as it acts upon the sealing lips.
SpectraSeals® are typically used in applications where conventional elastomers are not acceptable due to application
conditions such as:
• Media Compatibility • Temperature Extremes
• Friction Sensitive Application • High Surface Speeds
• Dynamic Sealing of Abrasive or • High PV Rates (Pressure x Velocity)
Non- Lubricating Media • Explosive Decompression
Due to the high performance requirements of the SpectraSeal®, most SpectraSeals® stocked by Hi-Tech Seals are custom
designed parts. Hi-Tech Seals can provide engineering support for seal design on demanding applications. Please contact
a Hi-Tech Seals’ sales representative with your questions and/or application requirements.
Part Numbers:
SS ___ - ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___
Materials: Blank - Glass, Moly filled PTFE TCF - Carbon Fiber filled PTFE
NYLON - Nylon TCG - Carbon Graphite filled PTFE
UHMW - UHMW TBF - Bronze filled PTFE
PEEK - PEEK
Selecting a profile:
1. Select the best dynamic lip
2. Decide if the lip is appropriate for the static lip. The SpectraSeals® profile does not have to be symmetrical.
SpectraSeals®
3. Select a spring:
A cantilever spring is recommended for dynamic, medium load applications where low friction is desired.
A helical wound spring is preferred for static applications or applications where sealability is more of a concern than friction.
• Low wear rate • Should not be used for dynamic sealing of abrasive
• Preferred design for oscillatory, slow rotary applications media
• Radius lip reduces probability of seal lip damage during • May weep in high speed reciprocating applications due
installation to seal lip hydroplaning
A
• Improved sealability, prefered design for dynamic sealing • Should not be used for dynamic sealing of abrasive
of gas/vapor media
• Beveled lip reduces probability of seal lip damage during • May weep in high speed reciprocating applications due
installation to seal lip hydroplaning
B
• Low wear rate • Should not be used for dynamic sealing of abrasive
• Redundant seal lip design media
• Trapped fluid between contact points provides added • May weep in high speed reciprocating applications due
lubrication to seal to seal lip hydroplaning
S
• Improved sealability over D style lip • Requires good lead-in chamfer if hardware is installed
• Preferred lip design for dynamic sealing of abrasive lip first
media • Lip design must be used in combination with other lip
• Reduced probability of seal lip hydroplaning style
X
• High Load of helical wound spring improves sealability • Should not be used for dynamic sealing of abrasive
• Suitable for sealing cryogenic gases and fluids media
• Radius lip reduces probability of seal lip damage during • May weep in high speed reciprocating applications due
installation to seal lip hydroplaning
H
• High load of helical wound spring improves sealability • Requires good lead-in chamfer if hardware is installed
• Preferred lip design for dynamic sealing of abrasive lip first
media • Lip design must be used in combination with radius lip
• Reduced probability of seal lip hydroplaning style
W
R (TFE) RM RB RS
Product Description:
Hi-Tech Seals can supply both piston and rod buffer seals, however, the majority of our stock consists of rod seals. Buffer
seals are usually used in combination with another rod seal, typically a U-cup style seal. Buffer seals in rod applications are
designed to absorb pressure fluctuations when working under high-load conditions. This serves a purpose of increasing
the lifespan of the rod seal.
Part Numbers:
BUF - ___ ___ ___ ___ ___ ___ ___
Style Descriptor
Rod Diameter
Example: BUF 1250TFE2 - 40% bronze filled PTFE R - style buffer with a Nitrile loader - 1.250” rod, N70 126 O-Ring
G
R 0.015” - 0.035”
L
E
Buffer Seals
A B E= Maximum extrusion gap. Largest gap permitted by
tolerances and eccentricity.
RB Urethane cup style buffer with solid endless anti- High Temperature Urethane -
extrusion ring. Nylon Back-up
RS Heavy duty. Ideal for large rod heavy duty service. 40% Bronze PTFE -
Nitrile Loader
Solid One Piece CAT Buffer Seal Urethane
Information is intended as a guide only, contact Hi-Tech Seals if you are designing a new
application or altering a current application.
R-Style
Gland Dimensions
B A G L
Part Rod O-Ring
Tol. O.D. Tol. Length Depth
Number Diameter C/S
BUF 1000TFE 1.000 +0.000/-0.002 3/32 1.298 +0.003/-0.000 0.126 0.149
BUF 1000TFE1 1.000 +0.000/-0.003 1/8 1.424 +0.004/-0.000 0.166 0.212
BUF 1250TFE1 1.250 +0.000/-0.002 3/32 1.548 +0.003/-0.000 0.126 0.149
BUF 1250TFE2 1.250 +0.000/-0.003 1/8 1.674 +0.004/-0.000 0.166 0.212
BUF 1500TFE1 1.500 +0.000/-0.002 3/32 1.798 +0.003/-0.000 0.126 0.149
BUF 1500TFE 1.500 +0.000/-0.003 1/8 1.924 +0.004/-0.000 0.166 0.212
BUF 1500TFE2 1.500 +0.000/-0.004 3/16 2.116 +0.005/-0.000 0.247 0.308
BUF 1750TFE 1.750 +0.000/-0.003 1/8 2.174 +0.004/-0.000 0.166 0.212
BUF 1750TFE1 1.750 +0.000/-0.004 3/16 2.366 +0.005/-0.000 0.247 0.308
BUF 2000TFE 2.000 +0.000/-0.003 1/8 2.424 +0.004/-0.000 0.166 0.212
BUF 2000TFE1 2.000 +0.000/-0.004 3/16 2.616 +0.005/-0.000 0.247 0.308
BUF 22500TFE 2.250 +0.000/-0.003 1/8 2.674 +0.004/-0.000 0.166 0.212
BUF 2250TFE1 2.250 +0.000/-0.004 3/16 2.866 +0.005/-0.000 0.247 0.308
BUF 2500TFE1 2.500 +0.000/-0.003 1/8 2.924 +0.004/-0.000 0.166 0.212
BUF 2500TFE 2.500 +0.000/-0.004 3/16 3.116 +0.005/-0.000 0.247 0.308
BUF 2750TFE1 2.750 +0.000/-0.003 1/8 3.174 +0.004/-0.000 0.166 0.212
BUF 2750TFE 2.750 +0.000/-0.004 3/16 3.366 +0.005/-0.000 0.247 0.308
BUF 3000TFE1 3.000 +0.000/-0.003 1/8 3.424 +0.004/-0.000 0.166 0.212
BUF 3000TFE 3.000 +0.000/-0.004 3/16 3.616 +0.005/-0.000 0.247 0.308
BUF 3250TFE 3.250 +0.000/-0.004 3/16 3.866 +0.005/-0.000 0.247 0.308
BUF 3500TFE 3.500 +0.000/-0.004 3/16 4.116 +0.005/-0.000 0.247 0.308
BUF 3750TFE 3.750 +0.000/-0.004 3/16 4.366 +0.005/-0.000 0.247 0.308
BUF 4000TFE1 4.000 +0.000/-0.004 3/16 4.616 +0.005/-0.000 0.247 0.308
BUF 4000TFE 4.000 +0.000/-0.005 1/4 4.830 +0.006/-0.000 0.320 0.415
BUF 4250TFE 4.250 +0.000/-0.004 3/16 4.866 +0.005/-0.000 0.247 0.308
BUF 4250TFE1 4.250 +0.000/-0.005 1/4 5.080 +0.006/-0.000 0.320 0.415
BUF 4500TFE 4.500 +0.000/-0.004 3/16 5.116 +0.005/-0.000 0.247 0.308
BUF 4500TFE1 4.500 +0.000/-0.005 1/4 5.330 +0.006/-0.000 0.320 0.415
Buffer Seals
Gland Dimensions
B A G L
Part Rod O-Ring
Tol. O.D. Tol. Length Depth
Number Diameter C/S
BUF 4750TFE 4.750 +0.000/-0.004 3/16 5.366 +0.005/-0.000 0.247 0.308
BUF 4750TFE1 4.750 +0.000/-0.005 1/4 5.580 +0.006/-0.000 0.320 0.415
BUF 5000TFE 5.000 +0.000/-0.004 3/16 5.616 +0.005/-0.000 0.247 0.308
BUF 5000TFE1 5.000 +0.000/-0.005 1/4 5.830 +0.006/-0.000 0.320 0.415
BUF 5250TFE 5.250 +0.000/-0.004 3/16 5.866 +0.005/-0.000 0.247 0.308
BUF 5250TFE1 5.250 +0.000/-0.005 1/4 6.080 +0.006/-0.000 0.320 0.415
BUF 5500TFE 5.500 +0.000/-0.004 3/16 6.116 +0.005/-0.000 0.247 0.308
BUF 5500TFE 5.500 +0.000/-0.005 1/4 6.330 +0.006/-0.000 0.320 0.415
BUF 5750TFE 5.750 +0.000/-0.004 3/16 6.366 +0.005/-0.000 0.247 0.308
BUF 5750TFE1 5.750 +0.000/-0.005 1/4 6.580 +0.006/-0.000 0.320 0.415
BUF 6000TFE 6.000 +0.000/-0.004 3/16 6.616 +0.005/-0.000 0.247 0.308
BUF 6000TFE1 6.000 +0.000/-0.005 1/4 6.830 +0.006/-0.000 0.320 0.415
BUF 6250TFE 6.250 +0.000/-0.004 3/16 6.866 +0.005/-0.000 0.247 0.308
BUF 6250TFE1 6.250 +0.000/-0.005 1/4 7.080 +0.006/-0.000 0.320 0.415
BUF 6500TFE 6.500 +0.000/-0.004 3/16 7.116 +0.005/-0.000 0.247 0.308
BUF 6500TFE1 6.500 +0.000/-0.005 1/4 7.330 +0.006/-0.000 0.320 0.415
BUF 6750TFE 6.750 +0.000/-0.004 3/16 7.366 +0.005/-0.000 0.247 0.308
BUF 6750TFE1 6.750 +0.000/-0.005 1/4 7.580 +0.006/-0.000 0.320 0.415
BUF 7000TFE 7.000 +0.000/-0.004 3/16 7.616 +0.005/-0.000 0.247 0.308
BUF 7000TFE1 7.000 +0.000/-0.005 1/4 7.830 +0.006/-0.000 0.320 0.415
BUF 7250TFE 7.250 +0.000/-0.004 3/16 7.866 +0.005/-0.000 0.247 0.308
BUF 7250TFE1 7.250 +0.000/-0.005 1/4 8.080 +0.006/-0.000 0.320 0.415
BUF 7500TFE 7.500 +0.000/-0.004 3/16 8.116 +0.005/-0.000 0.247 0.308
BUF 7500TFE1 7.500 +0.000/-0.005 1/4 8.330 +0.006/-0.000 0.320 0.415
BUF 7750TFE 7.750 +0.000/-0.004 3/16 8.366 +0.005/-0.000 0.247 0.308
BUF 7750TFE1 7.750 +0.000/-0.005 1/4 8.580 +0.006/-0.000 0.320 0.415
BUF 8000TFE1 8.000 +0.000/-0.004 3/16 8.616 +0.005/-0.000 0.247 0.308
BUF 8000TFE 8.000 +0.000/-0.005 1/4 8.830 +0.006/-0.000 0.320 0.415
BUF 8500TFE 8.500 +0.000/-0.005 1/4 9.330 +0.006/-0.000 0.320 0.415
BUF 9000TFE 9.000 +0.000/-0.005 1/4 9.830 +0.006/-0.000 0.320 0.415
BUF 9500TFE 9.500 +0.000/-0.005 1/4 10.330 +0.006/-0.000 0.320 0.415
BUF 10000TFE 10.000 +0.000/-0.005 1/4 10.830 +0.006/-0.000 0.320 0.415
BUF 10500TFE 10.500 +0.000/-0.005 1/4 11.330 +0.006/-0.000 0.320 0.415
BUF 11000TFE 11.000 +0.000/-0.005 1/4 11.830 +0.006/-0.000 0.320 0.415
BUF 11500TFE 11.500 +0.000/-0.005 1/4 12.330 +0.006/-0.000 0.320 0.415
BUF 12000TFE 12.000 +0.000/-0.005 1/4 12.830 +0.006/-0.000 0.320 0.415
RM-Style
Gland Dimensions
B A G L
Part Rod O-Ring
Tol. O.D. Tol. Length Depth
Number Diameter C/S
BUF 1000RM 1.000 +0.000/-0.003 1/8 1.424 +0.004/-0.000 0.166 0.212
BUF 1250RM 1.250 +0.000/-0.003 1/8 1.674 +0.004/-0.000 0.166 0.212
BUF 1500RM 1.500 +0.000/-0.003 1/8 1.924 +0.004/-0.000 0.166 0.212
BUF 1500RM1 1.500 +0.000/-0.004 3/16 2.116 +0.005/-0.000 0.247 0.308
BUF 1750RM 1.750 +0.000/-0.003 1/8 2.174 +0.004/-0.000 0.166 0.212
BUF 1750RM1 1.750 +0.000/-0.004 3/16 2.366 +0.005/-0.000 0.247 0.308
BUF 2000RM 2.000 +0.000/-0.003 1/8 2.424 +0.004/-0.000 0.166 0.212
BUF 2000RM1 2.000 +0.000/-0.004 3/16 2.616 +0.005/-0.000 0.247 0.308
BUF 2250RM 2.250 +0.000/-0.003 1/8 2.674 +0.004/-0.000 0.166 0.212
BUF 2250RM1 2.250 +0.000/-0.004 3/16 2.866 +0.005/-0.000 0.247 0.308
BUF 2500RM 2.500 +0.000/-0.003 1/8 2.924 +0.004/-0.000 0.166 0.212
BUF 2500RM1 2.500 +0.000/-0.004 3/16 3.116 +0.005/-0.000 0.247 0.308
BUF 2750RM 2.750 +0.000/-0.003 1/8 3.174 +0.004/-0.000 0.166 0.212
BUF 2750RM1 2.750 +0.000/-0.004 3/16 3.366 +0.005/-0.000 0.247 0.308
BUF 3000RM 3.000 +0.000/-0.003 1/8 3.424 +0.004/-0.000 0.166 0.212
BUF 3000RM1 3.000 +0.000/-0.004 3/16 3.616 +0.005/-0.000 0.247 0.308
Buffer Seals
Gland Dimensions
B A G L
Part Rod O-Ring
Tol. O.D. Tol. Length Depth
Number Diameter C/S
BUF 1750RB 1.750 +0.000/-0.004 3/16 2.366 +0.005/-0.000 0.247 0.308
BUF 2250RB 2.250 +0.000/-0.004 3/16 2.866 +0.005/-0.000 0.247 0.308
BUF 2500RB 2.500 +0.000/-0.004 3/16 3.116 +0.005/-0.000 0.247 0.308
BUF 2750RB 2.750 +0.000/-0.004 3/16 3.366 +0.005/-0.000 0.247 0.308
BUF 3000RB 3.000 +0.000/-0.004 3/16 3.616 +0.005/-0.000 0.247 0.308
BUF 3500RB 3.500 +0.000/-0.004 3/16 4.116 +0.005/-0.000 0.247 0.308
BUF 4000RB 4.000 +0.000/-0.004 3/16 4.616 +0.005/-0.000 0.247 0.308
BUF 4250RB 4.250 +0.000/-0.004 3/16 4.866 +0.005/-0.000 0.247 0.308
BUF 4500RB 4.500 +0.000/-0.004 3/16 5.116 +0.005/-0.000 0.247 0.308
BUF 4750RB 4.750 +0.000/-0.004 3/16 5.366 +0.005/-0.000 0.247 0.308
BUF 5000RB 5.000 +0.000/-0.004 3/16 5.616 +0.005/-0.000 0.247 0.308
BUF 5250RB 5.250 +0.000/-0.004 3/16 5.866 +0.005/-0.000 0.247 0.308
BUF 5500RB 5.500 +0.000/-0.004 3/16 6.116 +0.005/-0.000 0.247 0.308
BUF 5750RB 5.750 +0.000/-0.004 3/16 6.366 +0.005/-0.000 0.247 0.308
BUF 6000RB 6.000 +0.000/-0.004 3/16 6.616 +0.005/-0.000 0.247 0.308
BUF 6250RB 6.250 +0.000/-0.004 3/16 6.866 +0.005/-0.000 0.247 0.308
BUF 6500RB 6.500 +0.000/-0.004 3/16 7.116 +0.005/-0.000 0.247 0.308
BUF 6750RB 6.750 +0.000/-0.004 3/16 7.366 +0.005/-0.000 0.247 0.308
BUF 7000RB 7.000 +0.000/-0.004 3/16 7.616 +0.005/-0.000 0.247 0.308
BUF 7250RB 7.250 +0.000/-0.004 3/16 7.866 +0.005/-0.000 0.247 0.308
BUF 7500RB 7.500 +0.000/-0.004 3/16 8.116 +0.005/-0.000 0.247 0.308
BUF 7750RB 7.750 +0.000/-0.004 3/16 8.366 +0.005/-0.000 0.247 0.308
BUF 8000RB 8.000 +0.000/-0.004 3/16 8.616 +0.005/-0.000 0.247 0.308
RS-Style
Gland Dimensions
B A G L
Part Rod O-Ring
Tol. O.D. Tol. Length Depth
Number Diameter C/S
BUF 3000RS 3.000 +0.000/-0.004 3/16 3.616 +0.005/-0.000 0.247 0.308
BUF 3250RS 3.250 +0.000/-0.004 3/16 3.866 +0.005/-0.000 0.247 0.308
BUF 3500RS 3.500 +0.000/-0.004 3/16 4.116 +0.005/-0.000 0.247 0.308
BUF 3750RS 3.750 +0.000/-0.004 3/16 4.366 +0.005/-0.000 0.247 0.308
BUF 4000RS 4.000 +0.000/-0.004 3/16 4.616 +0.005/-0.000 0.247 0.308
BUF 4000RS1 4.000 +0.000/-0.005 1/4 4.830 +0.006/-0.000 0.320 0.415
BUF 4250RS 4.250 +0.000/-0.004 3/16 4.866 +0.005/-0.000 0.247 0.308
BUF 4250RS1 4.250 +0.000/-0.005 1/4 5.080 +0.006/-0.000 0.320 0.415
BUF 4500RS 4.500 +0.000/-0.004 3/16 5.116 +0.005/-0.000 0.247 0.308
BUF 4500RS1 4.500 +0.000/-0.005 1/4 5.330 +0.006/-0.000 0.320 0.415
BUF 4750RS 4.750 +0.000/-0.004 3/16 5.366 +0.005/-0.000 0.247 0.308
BUF 4750RS1 4.750 +0.000/-0.005 1/4 5.580 +0.006/-0.000 0.320 0.415
BUF 5000RS 5.000 +0.000/-0.004 3/16 5.616 +0.005/-0.000 0.247 0.308
BUF 5000RS1 5.000 +0.000/-0.005 1/4 5.830 +0.006/-0.000 0.320 0.415
BUF 5250RS 5.250 +0.000/-0.004 3/16 5.866 +0.005/-0.000 0.247 0.308
BUF 5250RS1 5.250 +0.000/-0.005 1/4 6.080 +0.006/-0.000 0.320 0.415
BUF 5500RS 5.500 +0.000/-0.004 3/16 6.116 +0.005/-0.000 0.247 0.308
BUF 5500RS1 5.500 +0.000/-0.005 1/4 6.330 +0.006/-0.000 0.320 0.415
BUF 5750RS 5.750 +0.000/-0.004 3/16 6.366 +0.005/-0.000 0.247 0.308
BUF 5750RS1 5.750 +0.000/-0.005 1/4 6.580 +0.006/-0.000 0.320 0.415
BUF 6000RS 6.000 +0.000/-0.004 3/16 6.616 +0.005/-0.000 0.247 0.308
Buffer Seals
BUF 6000RS1 6.000 +0.000/-0.005 1/4 6.830 +0.006/-0.000 0.320 0.415
BUF 6250RS 6.250 +0.000/-0.004 3/16 6.866 +0.005/-0.000 0.247 0.308
BUF 6250RS1 6.250 +0.000/-0.005 1/4 7.080 +0.006/-0.000 0.320 0.415
BUF 6500RS 6.500 +0.000/-0.004 3/16 7.116 +0.005/-0.000 0.247 0.308
BUF 6500RS1 6.500 +0.000/-0.005 1/4 7.330 +0.006/-0.000 0.320 0.415
BUF 6750RS 6.750 +0.000/-0.004 3/16 7.366 +0.005/-0.000 0.247 0.308
BUF 6750RS1 6.750 +0.000/-0.005 1/4 7.580 +0.006/-0.000 0.320 0.415
BUF 7000RS 7.000 +0.000/-0.004 3/16 7.616 +0.005/-0.000 0.247 0.308
BUF 7000RS1 7.000 +0.000/-0.005 1/4 7.830 +0.006/-0.000 0.320 0.415
BUF 7250RS 7.250 +0.000/-0.004 3/16 7.866 +0.005/-0.000 0.247 0.308
BUF 7250RS1 7.250 +0.000/-0.005 1/4 8.080 +0.006/-0.000 0.320 0.415
BUF 7500RS 7.500 +0.000/-0.004 3/16 8.116 +0.005/-0.000 0.247 0.308
BUF 7500RS1 7.500 +0.000/-0.005 1/4 8.330 +0.006/-0.000 0.320 0.415
BUF 7750RS 7.750 +0.000/-0.004 3/16 8.366 +0.005/-0.000 0.247 0.308
BUF 7750RS1 7.750 +0.000/-0.005 1/4 8.580 +0.006/-0.000 0.320 0.415
BUF 8000RS 8.000 +0.000/-0.004 3/16 8.616 +0.005/-0.000 0.247 0.308
BUF 8000RS1 8.000 +0.000/-0.005 1/4 8.830 +0.006/-0.000 0.320 0.415
BUF 8500RS 8.500 +0.000/-0.005 1/4 9.330 +0.006/-0.000 0.320 0.415
BUF 9000RS 9.000 +0.000/-0.005 1/4 9.830 +0.006/-0.000 0.320 0.415
BUF 9500RS 9.500 +0.000/-0.005 1/4 10.330 +0.006/-0.000 0.320 0.415
BUF 10000RS 10.000 +0.000/-0.005 1/4 10.830 +0.006/-0.000 0.320 0.415
BUF 10500RS 10.500 +0.000/-0.005 1/4 11.330 +0.006/-0.000 0.320 0.415
BUF 11000RS 11.000 +0.000/-0.005 1/4 11.830 +0.006/-0.000 0.320 0.415
BUF 11500RS 11.500 +0.000/-0.005 1/4 12.330 +0.006/-0.000 0.320 0.415
BUF 12000RS 12.000 +0.000/-0.005 1/4 12.830 +0.006/-0.000 0.320 0.415
BUF 12500RS 12.500 +0.000/-0.005 1/4 13.330 +0.006/-0.000 0.320 0.415
BUF 13000RS 13.000 +0.000/-0.005 1/4 13.830 +0.006/-0.000 0.320 0.415
BUF 13500RS 13.500 +0.000/-0.005 1/4 14.330 +0.006/-0.000 0.320 0.415
BUF 14000RS 14.000 +0.000/-0.005 1/4 14.830 +0.006/-0.000 0.320 0.415
BUF 14500RS 14.500 +0.000/-0.005 1/4 15.330 +0.006/-0.000 0.320 0.415
BUF 15000RS 15.000 +0.000/-0.005 1/4 15.830 +0.006/-0.000 0.320 0.415
BUF 15500RS 15.500 +0.000/-0.005 1/4 16.330 +0.006/-0.000 0.320 0.415
BUF 16000RS 16.000 +0.000/-0.005 1/4 16.830 +0.006/-0.000 0.320 0.415
Part Number Rod Diameter CAT Part Number Part Number Rod Diameter CAT Part Number
BUF 0875 0.875 5P4673 BUF 3500 3.500 6J6736
BUF 1250 1.250 9J3497 BUF 3750 3.750 8J6070
BUF 1500 1.500 6J9733 BUF 4000 4.000 8J4627
BUF 1750 1.750 6J9178 BUF 4250 4.250 7J8943
BUF 2000 2.000 6J6917 BUF 4375 4.375 3G5055
BUF 2250 2.250 5J3616 BUF 4750 4.750 7J9257
BUF 2375 2.375 6J6916 BUF 5000 5.000 8J4509
BUF 2500 2.500 5J3620 BUF 5500 5.500 8J9449
BUF 2750 2.750 6J6553 BUF 5750 5.750 9J5468
BUF 3000 3.000 6J6915 BUF 6500 6.500 6J8631
BUF 3250 3.250 6J7167 BUF 7000 7.000 9J2495
* Hi-Tech Seals Caterpillar parts are not original equipment parts. Caterpillar part numbers are only provided as a reference.
Modular Bearings
Hytrel® -54°C to 149°C
PTFE -200°C to 250°C
Polyurethane -54°C to 105°C
Product Description:
The modular bearing is used in both rod and piston applications. The modular bearing acts as a wear and load bearing
surface to help extend the life of a loaded or unloaded U-cup. The standard material of modular bearings is a durable Nylon.
Part Numbers:
MB - ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___
Example: MB - 25001750 H - Hytrel® modular bearing - 1 - 3/4” Nom. I.D., 2 - 1/4” Nom. O.D., 1/4” Nom. C/S, 1/4” Nom. Height
* Height is only listed if the axial height is greater than the cross-section.
O.D.
I.D.
Modular Bearings
Height
Part Number I.D. O.D. Height Part Number I.D. O.D. Height
MB 12500125 1/8 3/8 1/8 MB 25001750 1 - 3/4 2 - 1/4 1/4
MB 12500250 1/4 1/2 1/8 MB 25001875 1 - 7/8 2 - 3/8 1/4
MB 12500312 5/16 9/16 1/8 MB 25002000 2 2 - 1/2 1/4
MB 12500375 3/8 5/8 1/8 MB 25002250 2 - 1/4 2 - 3/4 1/4
MB 12500500 1/2 3/4 1/8 MB 25002500 2 - 1/2 3 1/4
MB 12500625 5/8 7/8 1/8 MB 25002625 2 - 5/8 3 - 1/8 1/4
MB 12500687 11/16 15/16 1/8 MB 25002750 2 - 3/4 3 - 1/4 1/4
MB 12500812 13/16 1 - 1/16 1/8 MB 25002875 2 - 7/8 3 - 3/8 1/4
MB 12500937 15/16 1 - 3/16 1/8 MB 25003000 3 3 - 1/2 1/4
MB 12501000 1 1 - 1/4 1/8 MB 25003250 3 - 1/4 3 - 3/4 1/4
MB 12501062 1 - 1/16 1 - 5/16 1/8 MB 25003375 3 - 3/8 3 - 7/8 1/4
MB 12501250 1 - 1/4 1 - 1/2 1/8 MB 25003500 3 - 1/2 4 1/4
MB 12501375 1 - 3/8 1 - 5/8 1/8 MB 25003750 3 - 3/4 4 - 1/4 1/4
MB 12501500 1 - 1/2 1 - 3/4 1/8 MB 25004000 4 4 - 1/2 1/4
MB 18700500 1/2 7/8 3/16 MB 25004125 4 - 1/8 4 - 5/8 1/4
MB 18700625 5/8 1 3/16 MB 25004250 4 - 1/4 4 - 3/4 1/4
MB 18701000 1 1 - 3/8 3/16 MB 25004500 4 - 1/2 5 1/4
MB 18701250 1 - 1/4 1 - 5/8 3/16 MB 25005000 5 5 - 1/2 1/4
MB 18701312 1 - 5/16 1 -11/16 3/16 MB 25005250 5 - 1/4 5 - 3/4 1/4
MB 18701500 1 - 1/2 1 - 7/8 3/16 MB 25005500 5 - 1/2 6 1/4
MB 18701625 1 - 5/8 2 3/16 MB 25006000 6 6 - 1/2 1/4
MB 18701875 1 - 7/8 2 - 1/4 3/16 MB 25006250 6 - 1/4 6 - 3/4 1/4
MB 18701937 1 -15/16 2 - 5/16 3/16 MB 25007250 7 - 1/4 7 - 3/4 1/4
MB 18702000 2 2 - 3/8 3/16 MB 25007500 7 - 1/2 8 1/4
MB 18702125 2 - 1/8 2 - 1/2 3/16 MB 25007750 7 - 3/4 8 - 1/4 1/4
MB 18702500 2 - 1/2 2 - 7/8 3/16 MB 250010000 10 10 - 1/2 1/4
MB 18702625 2 - 5/8 3 3/16 MB 250010750 10 - 3/4 11 - 1/4 1/4
MB 18702750 2 - 3/4 3 - 1/8 3/16 MB 250013000 13 13 - 1/2 1/4
MB 18703000 3 3 - 3/8 3/16 MB 28102250 2 - 1/4 2 -13/16 9/32
MB 18703125 3 - 1/8 3 - 1/2 3/16 MB 28108000 8 8 - 9/16 9/32
MB 18703250 3 - 1/4 3 - 5/8 3/16 MB 31201250 1 - 1/4 1 - 7/8 5/16
MB 18703500 3 - 1/2 3 - 7/8 3/16 MB 31201375 1 - 3/8 2 5/16
MB 18703625 3 - 5/8 4 3/16 MB 31201500 1 - 1/2 2 - 1/8 5/16
MB 18703875 3 - 7/8 4 - 1/4 3/16 MB 31201625 1 - 5/8 2 - 1/4 5/16
MB 25000500 1/2 1 1/4 MB 31201750 1 - 3/4 2 - 3/8 5/16
MB 25000750 3/4 1 - 1/4 1/4 MB 31201875 1 - 7/8 2 - 1/2 5/16
MB 25000875 7/8 1 - 3/8 1/4 MB 31202000 2 2 - 5/8 5/16
MB 25001000 1 1 - 1/2 1/4 MB 31202250 2 - 1/4 2 - 7/8 5/16
MB 25001062 1 - 1/16 1 - 9/16 1/4 MB 31202375 2 - 3/8 3 5/16
MB 25001250 1 - 1/4 1 - 3/4 1/4 MB 31202500 2 - 1/2 3 - 1/8 5/16
MB 25001312 1 - 5/16 1 -13/16 1/4 MB 31203000 3 3 - 5/8 5/16
MB 25001375 1 - 3/8 1 - 7/8 1/4 MB 31203125 3 - 1/8 3 - 3/4 5/16
MB 25001500 1 - 1/2 2 1/4 MB 31203500 3 - 1/2 4 - 1/8 5/16
Modular Bearings
MB 31204250 4 - 1/4 4 - 7/8 5/16 MB 43701000 1 1 - 7/8 7/16
MB 31204375 4 - 3/8 5 5/16 MB 43702125 2 - 1/8 3 7/16
MB 31204500 4 - 1/2 5 - 1/8 5/16 MB 43705000 5 5 - 7/8 7/16
MB 31205375 5 - 3/8 6 5/16 MB 50002000 2 3 1/2
MB 31208000 8 8 - 5/8 5/16 MB 50002250 2 - 1/4 3 - 1/4 1/2
MB 37500875 7/8 1 - 5/8 3/8 MB 50002375 2 - 3/8 3 - 3/8 1/2
MB 37501000 1 1 - 3/4 3/8 MB 50002500 2 - 1/2 3 - 1/2 1/2
MB 37501250 1 - 1/4 2 3/8 MB 50002750 2 - 3/4 3 - 3/4 1/2
MB 37501375 1 - 3/8 2 - 1/8 3/8 MB 50003000 3 4 1/2
MB 37501500 1 - 1/2 2 - 1/4 3/8 MB 50003500 3 - 1/2 4 - 1/2 1/2
MB 37501625 1 - 5/8 2 - 3/8 3/8 MB 50003750 3 - 3/4 4 - 3/4 1/2
MB 37501750 1 - 3/4 2 - 1/2 3/8 MB 50004000 4 5 1/2
MB 37501875 1 - 7/8 2 - 5/8 3/8 MB 50004250 4 - 1/4 5 - 1/4 1/2
MB 37502000 2 2 - 3/4 3/8 MB 50004500 4 - 1/2 5 - 1/2 1/2
MB 37502250 2 - 1/4 3 3/8 MB 50005000 5 6 1/2
MB 37502375 2 - 3/8 3 - 1/8 3/8 MB 50005250 5 - 1/4 6 - 1/4 1/2
MB 37502500 2 - 1/2 3 - 1/4 3/8 MB 50005500 5 - 1/2 6 - 1/2 1/2
MB 37502625 2 - 5/8 3 - 3/8 3/8 MB 50006000 6 7 1/2
MB 37502750 2 - 3/4 3 - 1/2 3/8 MB 50006500 6 - 1/2 7 - 1/2 1/2
MB 37503000 3 3 - 3/4 3/8 MB 50006750 6 - 3/4 7 - 3/4 1/2
MB 37503125 3 - 1/8 3 - 7/8 3/8 MB 50007000 7 8 1/2
MB 37503250 3 - 1/4 4 3/8 MB 50008000 8 9 1/2
MB 37503375 3 - 3/8 4 - 1/8 3/8 MB 50008500 8 - 1/2 9 - 1/2 1/2
MB 37503500 3 - 1/2 4 - 1/4 3/8 MB 50009000 9 10 1/2
MB 37503750 3 - 3/4 4 - 1/2 3/8 MB 50009500 9 - 1/2 10 - 1/2 1/2
MB 37503875 3 - 7/8 4 - 5/8 3/8 MB 500010000 10 11 1/2
MB 37504000 4 4 - 3/4 3/8 MB 500010500 10 - 1/2 11 - 1/2 1/2
MB 37504125 4 - 1/8 4 - 7/8 3/8 MB 500011500 11 - 1/2 12 - 1/2 1/2
MB 37504250 4 - 1/4 5 3/8 MB 500012000 12 13 1/2
MB 37504375 4 - 3/8 5 - 1/8 3/8 MB 500013500 13 - 1/2 14 - 1/2 1/2
MB 37504500 4 - 1/2 5 - 1/4 3/8 MB 500015000 15 16 1/2
MB 37504750 4 - 3/4 5 - 1/2 3/8 MB 500017000 17 18 1/2
MB 37504875 4 - 7/8 5 - 5/8 3/8 MB 500019000 19 20 1/2
MB 37505000 5 5 - 3/4 3/8 MB 500021000 21 22 1/2
MB 37505250 5 - 1/4 6 3/8 MB 500029000 29 30 1/2
MB 37505375 5 - 3/8 6 - 1/8 3/8 MB 62502000 2 3 - 1/4 5/8
MB 37505875 5 - 7/8 6 - 5/8 3/8 MB 62502500 2 - 1/2 3 - 3/4 5/8
MB 37506000 6 6 - 3/4 3/8 MB 62502750 2 - 3/4 4 5/8
MB 37506250 6 - 1/4 7 3/8 MB 62503000 3 4 - 1/4 5/8
MB 37506500 6 - 1/2 7 - 1/4 3/8 MB 62503250 3 - 1/4 4 - 1/2 5/8
MB 37507000 7 7 - 3/4 3/8 MB 62504625 4 - 5/8 5 - 7/8 5/8
MB 37507250 7 - 1/4 8 3/8 MB 62504750 4 - 3/4 6 5/8
MB 37507500 7 - 1/2 8 - 1/4 3/8 MB 62506750 6 - 3/4 8 5/8
MB 37507750 7 - 3/4 8 - 1/2 3/8 MB 62507000 7 8 - 1/4 5/8
MB 37509000 9 9 - 3/4 3/8 MB 625012750 12 - 3/4 14 5/8
MB 37509250 9 - 1/4 10 3/8 MB 625030000 30 31 - 1/4 5/8
MB 37509750 9 - 3/4 10 - 1/2 3/8 MB 75006500 6 - 1/2 8 3/4
MB 375010000 10 10 - 3/4 3/8 MB 75007500 7 - 1/2 9 3/4
MB 375010500 10 - 1/2 11 - 1/4 3/8 MB 75008000 8 9 - 1/2 3/4
Product Description:
The function of the wear ring is to help keep the piston centered, which allows for even wear and pressure distribution on
the seals. Hi-Tech Seals provides wear rings in many different materials with our standard material being glass filled Nylon.
Wear rings are used in both piston and rod applications. Three different cut styles are available for the wear ring, view the
chart below to see the benefits of each style.
Part Numbers:
WR - ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___
O.D. Width C/S if other CT (if close Material if other than Nylon:
than 0.125” tolerance) BRZ - Bronze filled PTFE
GTF - Glass filled PTFE
PH - Phenolic
PEEK - PEEK
TCG - Carbon Graphite
Wear Rings
Part Number O.D. Width Part Number O.D. Width Part Number O.D. Width
WR 1000187 1.000 0.187 WR 1250125 1.250 1.250 WR 2000750 2.000 0.750
WR 1000250 1.000 0.250 WR 1250150 1.250 1.500 WR 2000875 2.000 0.875
WR 1000312 1.000 0.312 WR 1250175 1.250 1.750 WR 2000100 2.000 1.000
WR 1000375 1.000 0.375 WR 1250200 1.250 2.000 WR 2000125 2.000 1.250
WR 1000500 1.000 0.500 WR 1500187 1.500 0.187 WR 2000150 2.000 1.500
WR 1000625 1.000 0.625 WR 1500250 1.500 0.250 WR 2000175 2.000 1.750
WR 1000750 1.000 0.750 WR 1500312 1.500 0.312 WR 2000200 2.000 2.000
WR 1000875 1.000 0.875 WR 1500375 1.500 0.375 WR 2500187 2.500 0.187
WR 1000100 1.000 1.000 WR 1500500 1.500 0.500 WR 2500250 2.500 0.250
WR 1000125 1.000 1.250 WR 1500625 1.500 0.625 WR 2500312 2.500 0.312
WR 1000150 1.000 1.500 WR 1500750 1.500 0.750 WR 2500375 2.500 0.375
WR 1000175 1.000 1.750 WR 1500875 1.500 0.875 WR 2500500 2.500 0.500
WR 1000200 1.000 2.000 WR 1500100 1.500 1.000 WR 2500625 2.500 0.625
WR 1125187 1.125 0.187 WR 1500125 1.500 1.250 WR 2500750 2.500 0.750
WR 1125250 1.125 0.250 WR 1500150 1.500 1.500 WR 2500875 2.500 0.875
WR 1125312 1.125 0.312 WR 1500175 1.500 1.750 WR 2500100 2.500 1.000
WR 1125375 1.125 0.375 WR 1500200 1.500 2.000 WR 2500125 2.500 1.250
WR 1125500 1.125 0.500 WR 1750187 1.750 0.187 WR 2500150 2.500 1.500
WR 1125625 1.125 0.625 WR 1750250 1.750 0.250 WR 2500175 2.500 1.750
WR 1125750 1.125 0.750 WR 1750312 1.750 0.312 WR 2500200 2.500 2.000
WR 1125875 1.125 0.875 WR 1750375 1.750 0.375 WR 2625187 2.625 0.187
WR 1125100 1.125 1.000 WR 1750500 1.750 0.500 WR 2625250 2.625 0.250
WR 1125125 1.125 1.250 WR 1750625 1.750 0.625 WR 2625312 2.625 0.312
WR 1125150 1.125 1.500 WR 1750750 1.750 0.750 WR 2625375 2.625 0.375
WR 1125175 1.125 1.750 WR 1750875 1.750 0.875 WR 2625500 2.625 0.500
WR 1125200 1.125 2.000 WR 1750100 1.750 1.000 WR 2625625 2.625 0.625
WR 1250187 1.250 0.187 WR 1750125 1.750 1.250 WR 2625750 2.625 0.750
WR 1250250 1.250 0.250 WR 1750150 1.750 1.500 WR 2625875 2.625 0.875
WR 1250312 1.250 0.312 WR 1750175 1.750 1.750 WR 2625100 2.625 1.000
WR 1250375 1.250 0.375 WR 1750200 1.750 2.000 WR 2625125 2.625 1.250
WR 1250500 1.250 0.500 WR 2000250 2.000 0.250 WR 2625150 2.625 1.500
WR 1250625 1.250 0.625 WR 2000312 2.000 0.312 WR 2625175 2.625 1.750
WR 1250750 1.250 0.750 WR 2000375 2.000 0.375 WR 2625200 2.625 2.000
WR 1250875 1.250 0.875 WR 2000500 2.000 0.500 WR 2750187 2.750 0.187
WR 1250100 1.250 1.000 WR 2000625 2.000 0.625 WR 2750250 2.750 0.250
Wear Rings
WR 4500375 4.500 0.375 WR 4875200 4.875 2.000 WR 5500150 5.500 1.500
WR 4500500 4.500 0.500 WR 5000250 5.000 0.250 WR 5500175 5.500 1.750
WR 4500625 4.500 0.625 WR 5000312 5.000 0.312 WR 5500200 5.500 2.000
WR 4500750 4.500 0.750 WR 5000375 5.000 0.375 WR 5625250 5.625 0.250
WR 4500875 4.500 0.875 WR 5000500 5.000 0.500 WR 5625312 5.625 0.312
WR 4500100 4.500 1.000 WR 5000625 5.000 0.625 WR 5625375 5.625 0.375
WR 4500125 4.500 1.250 WR 5000750 5.000 0.750 WR 5625500 5.625 0.500
WR 4500150 4.500 1.500 WR 5000875 5.000 0.875 WR 5625625 5.625 0.625
WR 4500175 4.500 1.750 WR 5000100 5.000 1.000 WR 5625750 5.625 0.750
WR 4500200 4.500 2.000 WR 5000125 5.000 1.250 WR 5625875 5.625 0.875
WR 4750187 4.750 0.187 WR 5000150 5.000 1.500 WR 5625100 5.625 1.000
WR 4750250 4.750 0.250 WR 5000175 5.000 1.750 WR 5625125 5.625 1.250
WR 4750312 4.750 0.312 WR 5000200 5.000 2.000 WR 5625150 5.625 1.500
WR 4750375 4.750 0.375 WR 5250250 5.250 0.250 WR 5625175 5.625 1.750
WR 4750500 4.750 0.500 WR 5250312 5.250 0.312 WR 5625200 5.625 2.000
WR 4750625 4.750 0.625 WR 5250375 5.250 0.375 WR 5750250 5.750 0.250
WR 4750750 4.750 0.750 WR 5250500 5.250 0.500 WR 5750312 5.750 0.312
WR 4750875 4.750 0.875 WR 5250625 5.250 0.625 WR 5750375 5.750 0.375
WR 4750100 4.750 1.000 WR 5250750 5.250 0.750 WR 5750500 5.750 0.500
WR 4750125 4.750 1.250 WR 5250875 5.250 0.875 WR 5750625 5.750 0.625
WR 4750150 4.750 1.500 WR 5250100 5.250 1.000 WR 5750750 5.750 0.750
WR 4750175 4.750 1.750 WR 5250125 5.250 1.250 WR 5750875 5.750 0.875
WR 4750200 4.750 2.000 WR 5250150 5.250 1.500 WR 5750100 5.750 1.000
WR 4875187 4.875 0.187 WR 5250175 5.250 1.750 WR 5750125 5.750 1.250
WR 4875250 4.875 0.250 WR 5250200 5.250 2.000 WR 5750150 5.750 1.500
WR 4875312 4.875 0.312 WR 5250225 5.250 2.250 WR 5750175 5.750 1.750
WR 4875375 4.875 0.375 WR 5500250 5.500 0.250 WR 5750200 5.750 2.000
WR 4875500 4.875 0.500 WR 5500312 5.500 0.312 WR 6000250 6.000 0.250
WR 4875625 4.875 0.625 WR 5500375 5.500 0.375 WR 6000312 6.000 0.312
WR 4875750 4.875 0.750 WR 5500500 5.500 0.500 WR 6000375 6.000 0.375
WR 4875875 4.875 0.875 WR 5500625 5.500 0.625 WR 6000500 6.000 0.500
WR 4875100 4.875 1.000 WR 5500750 5.500 0.750 WR 6000625 6.000 0.625
WR 4875125 4.875 1.250 WR 5500875 5.500 0.875 WR 6000750 6.000 0.750
WR 4875150 4.875 1.500 WR 5500100 5.500 1.000 WR 6000875 6.000 0.875
WR 4875175 4.875 1.750 WR 5500125 5.500 1.250 WR 6000100 6.000 1.000
Wear Rings
WR 8250875 8.250 0.875 WR 9000750 9.000 0.750 WR 9750625 9.750 0.625
WR 8250100 8.250 1.000 WR 9000875 9.000 0.875 WR 9750750 9.750 0.750
WR 8250125 8.250 1.250 WR 9000100 9.000 1.000 WR 9750875 9.750 0.875
WR 8250150 8.250 1.500 WR 9000125 9.000 1.250 WR 9750100 9.750 1.000
WR 8250175 8.250 1.750 WR 9000150 9.000 1.500 WR 9750125 9.750 1.250
WR 8250200 8.250 2.000 WR 9000175 9.000 1.750 WR 9750150 9.750 1.500
WR 8500250 8.500 0.250 WR 9000200 9.000 2.000 WR 9750175 9.750 1.750
WR 8500312 8.500 0.312 WR 9250250 9.250 0.250 WR 9750200 9.750 2.000
WR 8500375 8.500 0.375 WR 9250312 9.250 0.312 WR 10000500 10.000 0.500
WR 8500500 8.500 0.500 WR 9250375 9.250 0.375 WR 10000625 10.000 0.625
WR 8500625 8.500 0.625 WR 9250500 9.250 0.500 WR 10000750 10.000 0.750
WR 8500750 8.500 0.750 WR 9250625 9.250 0.625 WR 10000875 10.000 0.875
WR 8500875 8.500 0.875 WR 9250750 9.250 0.750 WR 10000100 10.000 1.000
WR 8500100 8.500 1.000 WR 9250875 9.250 0.875 WR 10000125 10.000 1.250
WR 8500125 8.500 1.250 WR 9250100 9.250 1.000 WR 10000150 10.000 1.500
WR 8500150 8.500 1.500 WR 9250125 9.250 1.250 WR 10000175 10.000 1.750
WR 8500175 8.500 1.750 WR 9250150 9.250 1.500 WR 10000200 10.000 2.000
WR 8500200 8.500 2.000 WR 9250175 9.250 1.750 WR 10000225 10.000 2.250
WR 8750250 8.750 0.250 WR 9250200 9.250 2.000 WR 10500500 10.500 0.500
WR 8750312 8.750 0.312 WR 9500250 9.500 0.250 WR 10500625 10.500 0.625
WR 8750375 8.750 0.375 WR 9500312 9.500 0.312 WR 10500750 10.500 0.750
WR 8750500 8.750 0.500 WR 9500375 9.500 0.375 WR 10500875 10.500 0.875
WR 8750625 8.750 0.625 WR 9500500 9.500 0.500 WR 10500100 10.500 1.000
WR 8750750 8.750 0.750 WR 9500625 9.500 0.625 WR 10500125 10.500 1.250
WR 8750875 8.750 0.875 WR 9500750 9.500 0.750 WR 10500150 10.500 1.500
WR 8750100 8.750 1.000 WR 9500875 9.500 0.875 WR 10500175 10.500 1.750
WR 8750125 8.750 1.250 WR 9500100 9.500 1.000 WR 10500200 10.500 2.000
WR 8750150 8.750 1.500 WR 9500125 9.500 1.250
WR 8750175 8.750 1.750 WR 9500150 9.500 1.500
WR 8750200 8.750 2.000 WR 9500175 9.500 1.750
WR 9000250 9.000 0.250 WR 9500200 9.500 2.000
WR 9000312 9.000 0.312 WR 9750250 9.750 0.250
WR 9000375 9.000 0.375 WR 9750312 9.750 0.312
WR 9000500 9.000 0.500 WR 9750375 9.750 0.375
Loader Materials:
Nitrile -40°C to 120°C
Product Description:
The Crown Seal® is a double acting piston squeeze-type seal. The seal inserts into a groove on the piston with the exposed
O-ring resting on the static surface of the piston. Due to its narrow single line seal contact, the sealing point creates a
positive seal for both a vacuum and high pressure applications. The Crown Seal® side legs act as an anti-extrusion device
for the O-ring and the legs provides additional stability to the seal.
Hi-Tech Seals’ standard Crown Seal® material is Fluorotrel®, however, we stock a large amount of Polyurethane in common
sizes. The Crown Seal® can be directly interchanged with T-seals, O-rings and Quad O-rings. To promote the longevity of
the Crown Seal® we commonly see a wear ring used on the piston. The wear ring helps keep the piston centered which
allows for even wear and pressure distribution on the Crown Seals® sealing surface; a close tolerance wear ring will also
help reduce bending of the rod.
Part Numbers:
CS ___ - ___ ___ ___ ___ ___ ___
WB - Wide Base
Dash Number Material - if other than Hytrel®/Nitrile
Blank - Piston CS
R - Rod CS
Example: CS 214 - Fluorotrel® Crown Seal™ with a Nitrile loader - 1” Nom. I.D., 1 - 1/4” Nom. O.D., 1/8” Nom. C/S
Crown Rod Seal dimension information is available through a Hi-Tech Seals’ Sales representative. The rod version of the Crown Seal®
follows the same nominal reference sizing, but contains different gland information.
Crown Seals®
A D B
Piston Style
Crown Seals®
Crown Seals®
Nominal Reference Sizes
Part A B C D
Number I.D. O.D. C/S Bore Diameter Groove Diameter Groove Length Piston Diameter
CS 431 5 - 1/4 5 - 3/4 1/4 5.751 +0.004/ -0.000 5.271 +0.000/ -0.004 0.365 +0.006/ -0.000 5.749 +0.000/ -0.004
CS 432 5 - 3/8 5 - 7/8 1/4 5.876 +0.004/ -0.000 5.396 +0.000/ -0.004 0.365 +0.006/ -0.000 5.874 +0.000/ -0.004
CS 433 5 - 1/2 6 1/4 6.001 +0.004/ -0.000 5.521 +0.000/ -0.004 0.365 +0.006/ -0.000 5.999 +0.000/ -0.004
CS 433WB 5 - 1/2 6 1/4 6.001 +0.004/ -0.000 5.521 +0.000/ -0.004 0.579 +0.006/ -0.000 5.999 +0.000/ -0.004
CS 434 5 - 5/8 6 - 1/8 1/4 6.126 +0.004/ -0.000 5.646 +0.000/ -0.004 0.365 +0.006/ -0.000 6.124 +0.000/ -0.004
CS 435 5 - 3/4 6 - 1/4 1/4 6.251 +0.004/ -0.000 5.771 +0.000/ -0.004 0.365 +0.006/ -0.000 6.249 +0.000/ -0.004
CS 437 6 6 - 1/2 1/4 6.500 +0.006/ -0.000 6.020 +0.000/ -0.006 0.365 +0.006/ -0.000 6.498 +0.000/ -0.006
CS 438 6 - 1/4 6 - 3/4 1/4 6.750 +0.006/ -0.000 6.270 +0.000/ -0.006 0.365 +0.006/ -0.000 6.748 +0.000/ -0.006
CS 439 6 - 1/2 7 1/4 7.000 +0.006/ -0.000 6.520 +0.000/ -0.006 0.365 +0.006/ -0.000 6.998 +0.000/ -0.006
CS 440 6 - 3/4 7 - 1/4 1/4 7.250 +0.006/ -0.000 6.770 +0.000/ -0.006 0.365 +0.006/ -0.000 7.248 +0.000/ -0.006
CS 441 7 7 - 1/2 1/4 7.500 +0.006/ -0.000 7.020 +0.000/ -0.006 0.365 +0.006/ -0.000 7.498 +0.000/ -0.006
CS 442 7 - 1/4 7 - 3/4 1/4 7.750 +0.006/ -0.000 7.270 +0.000/ -0.006 0.365 +0.006/ -0.000 7.748 +0.000/ -0.006
CS 443 7 - 1/2 8 1/4 8.000 +0.006/ -0.000 7.520 +0.000/ -0.006 0.365 +0.006/ -0.000 7.998 +0.000/ -0.006
CS 443WB 7 - 1/2 8 1/4 8.000 +0.006/ -0.000 7.520 +0.000/ -0.006 0.579 +0.006/ -0.000 7.998 +0.000/ -0.006
CS 444 7 - 3/4 8 - 1/4 1/4 8.250 +0.006/ -0.000 7.770 +0.000/ -0.006 0.365 +0.006/ -0.000 8.248 +0.000/ -0.006
CS 445 8 8 - 1/2 1/4 8.500 +0.006/ -0.000 8.020 +0.000/ -0.006 0.365 +0.006/ -0.000 8.498 +0.000/ -0.006
CS 446 8 - 1/2 9 1/4 9.000 +0.006/ -0.000 8.520 +0.000/ -0.006 0.365 +0.006/ -0.000 8.998 +0.000/ -0.006
CS 447 9 9 - 1/2 1/4 9.500 +0.006/ -0.000 9.020 +0.000/ -0.006 0.365 +0.006/ -0.000 9.498 +0.000/ -0.006
CS 448 9 - 1/2 10 1/4 10.000 +0.006/ -0.000 9.520 +0.000/ -0.006 0.365 +0.006/ -0.000 9.998 +0.000/ -0.006
CS 449 10 10 - 1/2 1/4 10.500 +0.006/ -0.000 10.020 +0.000/ -0.006 0.365 +0.006/ -0.000 10.498 +0.000/ -0.006
CS 450 10 - 1/2 11 1/4 11.000 +0.006/ -0.000 10.520 +0.000/ -0.006 0.365 +0.006/ -0.000 10.998 +0.000/ -0.006
CS 451 11 11 - 1/2 1/4 11.500 +0.006/ -0.000 11.020 +0.000/ -0.006 0.365 +0.006/ -0.000 11.498 +0.000/ -0.006
CS 452 11 - 1/2 12 1/4 12.000 +0.006/ -0.000 11.520 +0.000/ -0.006 0.365 +0.006/ -0.000 11.998 +0.000/ -0.006
Loader Materials:
Nitrile -40°C to 120°C
Viton®/Fluorocarbon -26°C to 204°C
Product Description:
Piston rings are excellent for sealing in hydraulic and pneumatic cylinder applications. The piston ring provides an
excellent low friction and strong chemical resistance. By changing the components’ materials we can change the
temperature range, frictional characteristics, extrusion resistance and wearability of the piston seal.
Part Numbers:
___ ___ ___ - ___ ___ ___ ___ ___ ___ ___ ___ ___ - ___ ___ ___ ___ ___ ___ ___
Piston Rings
A
Square
C
Piston Rings
D B A
Standard material: 15% glass filled PTFE ring with a Nitrile loader.
SPS Style - used in light duty applications.
Piston Rings
Groove Dimensions Ring Dimensions
Step Cut
O.D.
C/S
Piston Rings
Piston Rings
CAT 4500 5J4986 4.500 0.355 - 0.359 0.250 - 0.255
CAT 5500 5J4988 5.500 0.420 - 0.424 0.375 - 0.380
CAT 6000 5J4989 6.000 0.490 - 0.494 0.375 - 0.380 CAT - ___ ___ ___ ___
CAT 6250 5J4990 6.250 0.490 - 0.494 0.375 - 0.380
CAT 6500 5J4991 6.500 0.490 - 0.494 0.375 - 0.380
O.D.
CAT 7000 5J4997 7.000 0.475 - 0.479 0.375 - 0.381
CAT 8250 5J5559 8.250 0.535 - 0.539 0.375 - 0.380
Hi-Tech Seals’ Caterpillar parts are not original equipment parts. Caterpillar part numbers are only
provided as a reference.
AQ Seals
W
E
L
R
Piston Rings
O.D. I.D.
(E)
Diametrical
Seal Dimensions Dash No. Gland Dimensions
Clearance**
Axial Radial
Part Gland C/S Height O.D. I.D.
I.D. Height Height Radius 1000 3000
Number* O.D. ± 0.003 (Axial) Loader Loader
(W) (L) (R) PSI PSI
AQ 2000 2 0.130 0.285 -031 -324 1.384 0.288/0.293 0.308 0.025 0.024 0.008
AQ 2250 2 - 1/4 0.130 0.285 -032 -326 1.634 0.288/0.293 0.308 0.025 0.024 0.008
AQ 2500 2 - 1/2 0.130 0.285 -034 -328 1.884 0.288/0.293 0.308 0.025 0.024 0.008
AQ 2750 2 - 3/4 0.130 0.285 -036 -330 2.134 0.288/0.293 0.308 0.025 0.024 0.008
AQ 3000 3 0.130 0.285 -038 -332 2.384 0.288/0.293 0.308 0.025 0.024 0.008
AQ 3500 3 - 1/2 0.130 0.285 -041 -336 2.884 0.288/0.293 0.308 0.025 0.024 0.008
AQ 4000 4 0.130 0.285 -043 -340 3.384 0.288/0.293 0.308 0.025 0.024 0.008
AQ 4500 4 - 1/2 0.130 0.285 -045 -344 3.884 0.288/0.293 0.308 0.025 0.024 0.008
AQ 5000 5 0.130 0.285 -047 -348 4.384 0.288/0.293 0.308 0.025 0.024 0.008
AQ 5500 5 - 1/2 0.187 0.370 -252 -426 4.660 0.375/0.380 0.420 0.035 0.030 0.010
AQ 6000 6 0.187 0.370 -256 -430 5.160 0.375/0.380 0.420 0.035 0.030 0.010
AQ 6500 6 - 1/2 0.187 0.370 -259 -434 5.660 0.375/0.380 0.420 0.035 0.030 0.010
AQ 7000 7 0.187 0.370 -261 -437 6.160 0.375/0.380 0.420 0.035 0.030 0.010
AQ 7500 7 - 1/2 0.187 0.370 -263 -439 6.660 0.375/0.380 0.420 0.035 0.030 0.010
AQ 8000 8 0.187 0.370 -265 -441 7.160 0.375/0.380 0.420 0.035 0.030 0.010
AQ 8500 8 - 1/2 0.187 0.370 -267 -443 7.660 0.375/0.380 0.420 0.035 0.030 0.010
AQ 9000 9 0.187 0.370 -269 -445 8.160 0.375/0.380 0.420 0.035 0.030 0.010
AQ 9500 9 - 1/2 0.187 0.370 -272 -446 8.660 0.375/0.380 0.420 0.035 0.030 0.010
AQ 10000 10 0.187 0.370 -273 -447 9.160 0.375/0.380 0.420 0.035 0.030 0.010
The above chart represents our standard sizes. Custom sizes are available upon request. For pressures exceeding 3000 PSI consult a
Hi-Tech Seals’ sales representative.
Piston Rings
A
C
A B C W D R E
Seal Seal Width Seal C/S Split Gap Groove Width Min. Groove Max.
Part O.D. Groove Root Extrusion
Number Min. Max. Min. Max. Min. Max. Min. Max. Depth Radius Gap
CI 1500 1.500 0.123 0.124 0.052 0.067 0.005 0.015 0.126 0.128 0.082 0.010 0.018
CI 1625 1.625 0.123 0.124 0.056 0.071 0.005 0.015 0.126 0.128 0.086 0.010 0.019
CI 1750 1.750 0.123 0.124 0.060 0.075 0.005 0.015 0.126 0.128 0.090 0.010 0.020
CI 1875 1.875 0.123 0.124 0.060 0.075 0.005 0.015 0.126 0.128 0.090 0.010 0.020
CI 2000 2.000 0.123 0.124 0.060 0.075 0.005 0.015 0.126 0.128 0.090 0.010 0.020
CI 2250 2.250 0.186 0.187 0.070 0.085 0.005 0.015 0.189 0.191 0.100 0.010 0.023
CI 2375187 2.375 0.186 0.187 0.076 0.091 0.005 0.015 0.189 0.191 0.106 0.010 0.025
CI 2500 2.500 0.186 0.187 0.082 0.097 0.005 0.015 0.189 0.191 0.112 0.010 0.027
CI 2500125 2.500 0.123 0.124 0.082 0.097 0.005 0.015 0.126 0.128 0.112 0.010 0.027
CI 2625 2.625 0.186 0.187 0.087 0.102 0.005 0.015 0.189 0.191 0.117 0.010 0.028
CI 2750 2.750 0.186 0.187 0.091 0.106 0.005 0.015 0.189 0.191 0.121 0.010 0.030
CI 2750125 2.750 0.123 0.124 0.091 0.106 0.005 0.015 0.126 0.128 0.121 0.010 0.030
CI 2875 2.875 0.186 0.187 0.093 0.108 0.005 0.015 0.189 0.191 0.123 0.010 0.030
CI 3000 3.000 0.186 0.187 0.095 0.110 0.005 0.015 0.189 0.191 0.125 0.010 0.031
CI 3000125 3.000 0.123 0.124 0.095 0.110 0.005 0.015 0.126 0.128 0.125 0.010 0.031
CI 3000250 3.000 0.248 0.249 0.095 0.110 0.005 0.015 0.251 0.253 0.125 0.010 0.031
CI 3000312 3.000 0.310 0.311 0.095 0.110 0.005 0.015 0.313 0.315 0.125 0.010 0.031
CI 3250 3.250 0.186 0.187 0.103 0.118 0.005 0.015 0.189 0.191 0.133 0.010 0.033
CI 3250125 3.250 0.123 0.124 0.103 0.118 0.005 0.015 0.126 0.128 0.133 0.010 0.033
CI 3500 3.500 0.186 0.187 0.109 0.124 0.005 0.015 0.189 0.191 0.139 0.010 0.035
CI 3502 3.500 0.123 0.124 0.109 0.124 0.005 0.015 0.126 0.128 0.139 0.010 0.035
CI 3750 3.750 0.248 0.249 0.115 0.130 0.005 0.015 0.251 0.253 0.145 0.010 0.037
CI 3875 3.875 0.248 0.249 0.123 0.138 0.005 0.015 0.251 0.253 0.153 0.010 0.039
CI 4000 4.000 0.248 0.249 0.127 0.142 0.005 0.015 0.251 0.253 0.157 0.010 0.040
Cast Iron
Piston Rings
A B C W D R E
Seal Seal Width Seal C/S Split Gap Groove Width Min. Groove Max.
Part O.D. Groove Root Extrusion
Number Min. Max. Min. Max. Min. Max. Min. Max. Depth Radius Gap
CI 4000187 4.000 0.186 0.187 0.127 0.142 0.005 0.015 0.189 0.191 0.157 0.010 0.040
CI 4000312 4.000 0.310 0.311 0.127 0.142 0.005 0.015 0.313 0.315 0.157 0.010 0.040
CI 4250 4.250 0.248 0.249 0.135 0.150 0.005 0.015 0.251 0.253 0.165 0.010 0.043
CI 4250187 4.250 0.186 0.187 0.135 0.150 0.005 0.015 0.189 0.191 0.165 0.010 0.043
CI 4500 4.500 0.248 0.249 0.145 0.160 0.005 0.015 0.251 0.253 0.175 0.010 0.046
CI 4500187 4.500 0.186 0.187 0.145 0.160 0.005 0.015 0.189 0.191 0.175 0.010 0.046
CI 4750 4.750 0.248 0.249 0.152 0.167 0.010 0.020 0.251 0.253 0.182 0.010 0.048
CI 5000 5.000 0.248 0.249 0.160 0.175 0.010 0.020 0.251 0.253 0.190 0.010 0.050
CI 5000187 5.000 0.186 0.186 0.160 0.175 0.010 0.020 0.189 0.191 0.190 0.010 0.050
CI 5000312 5.000 0.310 0.311 0.160 0.175 0.010 0.020 0.313 0.315 0.190 0.010 0.050
CI 5250 5.250 0.248 0.249 0.166 0.181 0.010 0.020 0.251 0.253 0.196 0.010 0.052
CI 5500 5.500 0.248 0.249 0.175 0.190 0.010 0.020 0.251 0.253 0.205 0.010 0.055
CI 550187 5.500 0.186 0.187 0.175 0.190 0.010 0.020 0.189 0.191 0.205 0.010 0.055
CI 6000 6.000 0.310 0.311 0.191 0.206 0.010 0.020 0.313 0.315 0.221 0.010 0.060
CI 6000250 6.000 0.248 0.249 0.191 0.206 0.010 0.020 0.251 0.253 0.221 0.010 0.060
CI 6500 6.500 0.310 0.311 0.211 0.226 0.010 0.020 0.313 0.315 0.241 0.010 0.066
CI 6750250 6.750 0.248 0.249 0.219 0.234 0.010 0.020 0.251 0.253 0.249 0.010 0.068
CI 7000 7.000 0.310 0.311 0.228 0.243 0.010 0.200 0.313 0.315 0.258 0.010 0.071
CI 7500250 7.500 0.248 0.249 0.244 0.259 0.010 0.020 0.251 0.253 0.274 0.010 0.075
CI 8000 8.000 0.372 0.373 0.260 0.275 0.010 0.020 0.375 0.377 0.290 0.010 0.080
CI 8000312 8.000 0.310 0.311 0.260 0.275 0.010 0.020 0.313 0.315 0.290 0.010 0.080
CI 8500250 8.500 0.248 0.249 0.275 0.290 0.010 0.020 0.251 0.253 0.305 0.010 0.085
CI 9000 9.000 0.372 0.373 0.294 0.309 0.010 0.020 0.375 0.377 0.324 0.010 0.090
CI 9000500 9.000 0.497 0.498 0.294 0.309 0.010 0.020 0.500 0.502 0.324 0.010 0.090
CI 10000 10.000 0.371 0.373 0.317 0.332 0.010 0.020 0.375 0.377 0.347 0.010 0.097
CI 12500500 12.500 0.496 0.498 0.389 0.419 0.010 0.020 0.500 0.502 0.434 0.010 0.121
Fluid Seals
Neoprene -40°C to 121°C
Aflas™ -9°C to 232°C
Anti- Extrusion Material:
Acetal (POM) -40°C to 100°C
Product Description:
Fluid seals are available in three styles, single acting (SAF), double acting with a locking wear ring (DAF W style) and double
acting with a loose wear ring (DAF L/W). The single acting fluid seal can work both as a piston or rod seal. The single acting
fluid seals standard material is a Nitrile sealing element with a fabric reinforced base. Corresponding wear rings are sold
separately. For dimension information of single acting fluid seals with a wear ring please contact Hi-Tech Seals.
Our double acting fluid seals are designed for use on split pistons. Double acting fluid seals are composed of a Nitrile
sealing element, fabric reinforced base and two Acetal wear rings.
Part Numbers:
___ ___ ___ - ___ ___ ___ ___ ___ ___
Example: DAF - 2500LW - Double acting fluid seal w/ loose wear rings- 2.500” O.D., 1.875” I.D., 0.937 height.
R2
R1
Fluid Seals
B D E A
Fluid Seals
For the gland reference please view the figure on the previous page.
R
Fluid Seals
BA
Additional sizes are available upon request. Please contact Hi-Tech Seals for further information.
Piston Cups
Polyurethane -54°C to 105°C
PTFE -200°C to 250°C
Product Description:
Piston cups seal on their outer lip and are held in place by a follower plate. To maximize product availability, Hi-Tech Seals
piston cups do not come with a pre-cut bolt hole. Our machining department is equipped to quickly cut the appropriate
hole size for your application.
Hi-Tech Seals also stocks Edbro and Renn piston cups in unique sizes. For availablilty in Edbro and Renn sizes please contact
Hi-Tech Seals.
Part Numbers:
___ ___ ___ - ___ ___ ___ ___ ___ ___ ___ ___ ___
Example: PCH - 2500 - Homogenous Nitrile Piston Cup - 2 - 1/2” Nominal O.D.
O.D.
C/S
Piston Cups
Height
Vee Packing
EPDM -54°C to 150°C
Highly Saturated Nitrile -40°C to 160°C
Aflas™ -9°C to 232°C
Plastic Materials
Nylon -54°C to 121°C
Hytrel® -54°C to 149°C
PEEK -70°C to 260°C
PTFE -200°C to 250°C
Product Description:
Vee packing is a popular, highly adaptable sealing product. It is typically used in adjustable gland applications such as
telescoping truck hoists, pumps and valves. Vee packing sets are composed of a top and bottom component with
a varying numbers of center vee’s. Vee packing can be optimized by altering materials to accommodate different
chemicals, temperatures and pressures.
Part Numbers:
V___ ___ - ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___
O.D.
I.D.
Vee Packing
Parts below represent center Vee packing. Hi-Tech Seals female (top) Vee packing are represented by a 1 at the end instead of
a 0 and male (bottom) Vee packing have a 2 at the end.
The following Vee packing sizes are also available in Teflon® (VPT) and Viton®/fluorocarbon (VPV).
Part Number I.D. O.D. Part Number I.D. O.D. Part Number I.D. O.D.
VP 01870750 3/16 3/4 VP 08121310 13/16 1 - 5/16 VP 12502250 1 - 1/4 2 - 1/4
VP 02500620 1/4 5/8 VP 08751250 7/8 1 - 1/4 VP 13121810 1 - 5/16 1 -13/16
VP 02500870 1/4 7/8 VP 08751370 7/8 1 - 3/8 VP 13751870 1 - 3/8 1 - 7/8
VP 03750750 3/8 3/4 VP 08751500 7/8 1 - 1/2 VP 13752000 1 - 3/8 2
VP 03750870 3/8 7/8 VP 10001370 1 1 - 3/8 VP 13752120 1 - 3/8 2 - 1/8
VP 03751000 3/8 1 VP 10001500 1 1 - 1/2 VP 15001870 1 - 1/2 1 - 7/8
VP 05000870 1/2 7/8 VP 10001620 1 1 - 5/8 VP 15002000 1 - 1/2 2
VP 05001000 1/2 1 VP 10001750 1 1 - 3/4 VP 15002120 1 - 1/2 2 - 1/8
VP 06251000 5/8 1 VP 11251620 1 - 1/8 1 - 5/8 VP 15002250 1 - 1/2 2 - 1/4
VP 06251120 5/8 1 - 1/8 VP 11251750 1 - 1/8 1 - 3/4 VP 15002500 1 - 1/2 2 - 1/2
VP 06251250 5/8 1 - 1/4 VP 11871560 1 - 3/16 1 - 9/16 VP 16252120 1 - 5/8 2 - 1/8
VP 07501120 3/4 1 - 1/8 VP 12501620 1 - 1/4 1 - 5/8 VP 16252250 1 - 5/8 2 - 1/4
VP 07501250 3/4 1 - 1/4 VP 12501750 1 - 1/4 1 - 3/4 VP 16252375 1 - 5/8 2 - 3/8
VP 07501370 3/4 1 - 3/8 VP 12501870 1 - 1/4 1 - 7/8 VP 17502250 1 - 3/4 2 - 1/4
VP 07501500 3/4 1 - 1/2 VP 12502000 1 - 1/4 2 VP 17502310 1 - 3/4 2 - 5/16
Vee Packing
Part Number I.D. O.D. Part Number I.D. O.D. Part Number I.D. O.D.
VP 17502370 1 - 3/4 2 - 3/8 VP 31253750 3 - 1/8 3 - 7/8 VP 50005870 5 5 - 7/8
VP 17502500 1 - 3/4 2 - 1/2 VP 32503620 3 - 1/4 3 - 5/8 VP 50006000 5 6
VP 17502750 1 - 3/4 2 - 3/4 VP 32503750 3 - 1/4 3 - 3/4 VP 50006500 5 6 - 1/2
VP 18752370 1 - 7/8 2 - 3/8 VP 32504000 3 - 1/4 4 VP 51255620 5 - 1/8 5 - 5/8
VP 18752500 1 - 7/8 2 - 1/2 VP 32504250 3 - 1/4 4 - 1/4 VP 52505750 5 - 1/4 5 - 3/4
VP 18752625 1 - 7/8 2 - 5/8 VP 32504500 3 - 1/4 4 - 1/2 VP 52506000 5 - 1/4 6
VP 19372430 1 -15/16 2 - 7/16 VP 33753870 3 - 3/8 3 - 7/8 VP 52506250 5 - 1/4 6 - 1/4
VP 20002500 2 2 - 1/2 VP 33754000 3 - 3/8 4 VP 55006000 5 - 1/2 6
VP 20002620 2 2 - 5/8 VP 33754120 3 - 3/8 4 - 1/8 VP 55006250 5 - 1/2 6 - 1/4
VP 20002750 2 2 - 3/4 VP 35004000 3 - 1/2 4 VP 55006500 5 - 1/2 6 - 1/2
VP 20003000 2 3 VP 35004250 3 - 1/2 4 - 1/4 VP 55007000 5 - 1/2 7
VP 21252620 2 - 1/8 2 - 5/8 VP 35004500 3 - 1/2 4 - 1/2 VP 57506370 5 - 3/4 6 - 3/8
VP 21252750 2 - 1/8 2 - 3/4 VP 35004750 3 - 1/2 4 - 3/4 VP 57506500 5 - 3/4 6 - 1/2
VP 21253000 2 - 1/8 3 VP 35005000 3 - 1/2 5 VP 57506750 5 - 3/4 6 - 3/4
VP 22502750 2 - 1/4 2 - 3/4 VP 37504250 3 - 3/4 4 - 1/4 VP 60006500 6 6 - 1/2
VP 22502870 2 - 1/4 2 - 7/8 VP 37504370 3 - 3/4 4 - 3/8 VP 60006750 6 6 - 3/4
VP 22503000 2 - 1/4 3 VP 37504500 3 - 3/4 4 - 1/2 VP 60007000 6 7
VP 22503250 2 - 1/4 3 - 1/4 VP 37504750 3 - 3/4 4 - 3/4 VP 62507000 6 - 1/4 7
VP 23752870 2 - 3/8 2 - 7/8 VP 38754500 3 - 7/8 4 - 1/2 VP 65007000 6 - 1/2 7
VP 23753000 2 - 3/8 3 VP 40004500 4 4 - 1/2 VP 65007250 6 - 1/2 7 - 1/4
VP 23753120 2 - 3/8 3 - 1/8 VP 40004750 4 4 - 3/4 VP 62507500 6 - 1/2 7 - 1/2
VP 24373310 2 - 7/16 3 - 5/16 VP 40004870 4 4 - 7/8 VP 65007750 6 - 1/2 7 - 3/4
VP 25002870 2 - 1/2 2 - 7/8 VP 40005000 4 5 VP 65008000 6 - 1/2 8
VP 25003000 2 - 1/2 3 VP 40005120 4 5 - 1/8 VP 67507250 6 - 3/4 7 - 1/4
VP 25003120 2 - 1/2 3 - 1/8 VP 42504750 4 - 1/4 4 - 3/4 VP 67507370 6 - 3/4 7 - 3/8
VP 25003250 2 - 1/2 3 - 1/4 VP 42505000 4 - 1/4 5 VP 67507500 6 - 3/4 7 - 1/2
VP 25003500 2 - 1/2 3 - 1/2 VP 42505120 4 - 1/4 5 - 1/8 VP 70007500 7 7 - 1/2
VP 26253120 2 - 5/8 3 - 1/8 VP 42505250 4 - 1/4 5 - 1/4 VP 70007750 7 7 - 3/4
VP 26253250 2 - 5/8 3 - 1/4 VP 45005000 4 - 1/2 5 VP 70008000 7 8
VP 27503250 2 - 3/4 3 - 1/4 VP 45005120 4 - 1/2 5 - 1/8 VP 75008000 7 - 1/2 8
VP 27503370 2 - 3/4 3 - 3/8 VP 45005250 4 - 1/2 5 - 1/4 VP 75008250 7 - 1/2 8 - 1/4
VP 27503500 2 - 3/4 3 - 1/2 VP 45005370 4 - 1/2 5 - 3/8 VP 75008500 7 - 1/2 8 - 1/2
VP 27503750 2 - 3/4 3 - 3/4 VP 45005500 4 - 1/2 5 - 1/2 VP 80008500 8 8 - 1/2
VP 28753370 2 - 7/8 3 - 3/8 VP 46255250 4 - 5/8 5 - 1/4 VP 80009000 8 9
VP 28753500 2 - 7/8 3 - 1/2 VP 47505250 4 - 3/4 5 - 1/4 VP 82509000 8 - 1/4 9
VP 28753620 2 - 7/8 3 - 5/8 VP 47505370 4 - 3/4 5 - 3/8 VP 90009500 9 9 - 1/2
VP 30003500 3 3 - 1/2 VP 47505500 4 - 3/4 5 - 1/2 VP 937510000 9 - 3/8 10
VP 30003620 3 3 - 5/8 VP 58755500 4 - 7/8 5 - 1/2 VP 975010500 9 - 3/4 10 - 1/2
VP 30003750 3 3 - 3/4 VP 48705625 4 - 7/8 5 - 5/8 VP 1000010750 10 10 - 3/4
VP 30004000 3 4 VP 50005500 5 5 - 1/2 VP 1100011750 11 11 - 3/4
VP 31253500 3 - 1/8 3 - 1/2 VP 50005750 5 5 - 3/4
Blue/Black Sets
B
A
Vee Packing
D
C
Our Blue/Black Vee packing sets are constructed of Hytrel® (blue) and Nylon (black) Vee’s. The material properties make
it excellent for operation in fire resistant fluids. Blue/Black Vee packing sets are commonly used in heavy equipment and
mining applications.
Sets ending with a G include the guidelock component. Guidelocks can also be purchased separately through Hi-Tech
Seals. Additional sizes and sets are available upon request.
A B C D
Part Number I.D. O.D. Stack Height Top Vee Height Set
VBB 15002000 1 - 1/2 2 1 1/4 1-5-1
VBB 20002500 2 2 - 1/2 1 1/4 1-5-1
VBB 20002500175G 2 2 - 1/2 1 - 3/4 1 1-5-1
VBB 22502750 2 - 1/4 2 - 3/4 1 1/4 1-5-1
VBB 22502750175 2 - 1/4 2 - 3/4 1 - 3/4 1 1-5-1
VBB 250030001750 2 - 1/2 3 1 - 3/4 1 1-5-1
VBB 30003500 3 3 - 1/2 1 1/4 1-5-1
VBB 30003500175 3 3 - 1/2 1 - 3/4 1 1-5-1
VBB 35004000G75 3 - 1/2 4 3/4 1/4 1-3-1
VBB 35004000G 3 - 1/2 4 1 1/4 1-5-1
VBB 40004500G 4 4 - 1/2 1 1/4 1 - 5 -1
VBB 450050001125 4 - 1/2 5 1 - 1/8 1/2 1-4-1
VBB 45005000 4 - 1/2 5 1 1/4 1-5-1
VBB 50005500G 5 5 - 1/2 1 1/4 1-5-1
VBB 550060001125 5 - 1/2 6 1 - 1/8 1/2 1-4-1
VBB 55006000 5 - 1/2 6 1 1/4 1 - 5 -1
VBB 60006500G 6 6 - 1/2 1 1/4 1-5-1
VBB 60006500125 6 6 - 1/2 1 - 1/4 1/2 1-5-1
B
A
Vee Packing
C
A B C A B C
Set Set
Part Number Material I.D. O.D. Height Part Number Material I.D. O.D. Height
VP 0187075S Nitrile 3/16 3/4 1.05 VPT 0250087S1080 PTFE 1/4 7/8 1.08
VP 0250087S Nitrile 1/4 7/8 1 VPT 0375087S10975 PTFE 3/8 7/8 0.975
VP 0250087S1 Nitrile 1/4 7/8 1.12 VPT 0500100S0955 PTFE 1/2 1 0.955
VP 0375087S Nitrile 3/8 7/8 1.12 VPT 07501250S1135 PTFE 3/4 1 - 1/4 1.135
VP 0500100S1090 Nitrile 1/2 1 1.09 VPT 10001500S1066 PTFE 1 1 - 1/2 1.066
VP 0750125S1 Nitrile 3/4 1 - 1/4 1 VPT 1250175S1055 PTFE 1 - 1/4 1 - 3/4 1.055
VP 0875137S Nitrile 7/8 1 - 3/8 1 VPT 1250187S1175 PTFE 1 - 1/4 1 - 3/4 1.175
VP 0875137S1 Nitrile 7/8 1 - 3/8 1.12 VPV 0250087S1100 Viton® 1/4 7/8 1.12
VP 1000150S Nitrile 1 1 - 1/2 1.12 VPV 0375087S1000 Viton® 3/8 7/8 1
VP 1250175S Nitrile 1 1/4 1 - 3/4 1.12 VPV 0500100S Viton® 1/2 1 1
VP 0250087SROCK Nitrile Hard 1/4 7/8 1.12 VPV 1000150S Viton® 1 1 - 1/2 1.375
VP 0375087SROCK Nitrile Hard 3/8 7/8 1 VPV 1250175S2 Viton® 1 - 1/4 1 - 3/4 1.125
VP 0500100SROCK Nitrile Hard 1/2 1 1 VP 0187075SF Fluorosilicone 3/16 1.06
VP 0750125SROCK Nitrile Hard 3/4 1 - 1/4 1.375 VP 0250087SF Fluorosilicone 1/4 7/8 1.17
VPT 01870750S1066 PTFE 3/16 3/4 1.06 VP 0375087SF Fluorosilicone 3/8 7/8 1.17
VPT 01870750S1010 PTFE 3/16 3/4 1.01 VP 0500100SF Fluorosilicone 1/2 1 1.17
Product Description:
Oil seals are used to seal fluids on rotating shafts at various speeds. Oil seals are available with either a single or double
sealing lip. In most cases the function of the secondary sealing lip on double lipped seals is used as an excluder to keep
contaminants from entering the system. Common oil seal applications include: gear boxes, electric motors and pumps.
Oil seals for use on external rotation applications are available upon request.
Hi-Tech Seals also offers our large bore L1M and L2M seal (available in imperial and metric sizes) for heavy duty applications
such as equipment used in steel mills, pulp and paper plants, turbines and more.
Part Numbers:
___ ___ ___ - ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___
Example: O 0562 1125 250DL - Nitrile double lip Oil Seal - 9/16” I.D., 1 - 1/8” O.D., 1/4” height.
Oil Seals
Height
Part Number I.D. O.D. Height Part Number I.D. O.D. Height
O 02500500125 1/4 1/2 1/8 O 06251125312 5/8 1 - 1/8 5/16
O 02500750250 1/4 3/4 1/4 O 06251125375 5/8 1 - 1/8 3/8
O 03120687312 5/16 11/16 5/16 O 06251250250* 5/8 1 - 1/4 1/4
O 03120750250 5/16 3/4 1/4 O 06251250312 5/8 1 - 1/4 5/16
O 03120875250 5/16 7/8 1/4 O 06251250375 5/8 1 - 1/4 3/8
O 03750563094 3/8 9/16 3/32 O 06251375250 5/8 1 - 3/8 1/4
O 03750750250 3/8 3/4 1/4 O 06251375312 5/8 1 - 3/8 5/16
O 03750875250DL 3/8 7/8 1/4 O 06251500250 5/8 1 - 1/2 1/4
O 04370875250DL 7/16 7/8 1/4 O 06251500375 5/8 1 - 1/2 3/8
O 04371000250 7/16 1 1/4 O 06871125250 11/16 1 - 1/8 1/4
O 04371125375 7/16 1 1/8 3/8 O 06871250250 11/16 1 - 1/4 1/4
O 05000875250* 1/2 7/8 1/4 O 06871375375 11/16 1 - 3/8 3/8
O 05001000187 1/2 1 3/16 O 07501000187 3/4 1 3/16
O 05001000250DL 1/2 1 1/4 O 07501125187 3/4 1 - 1/8 3/16
O 05001000312DL 1/2 1 5/16 O 07501125250DL 3/4 1 - 1/8 1/4
O 05001000375 1/2 1 3/8 O 07501187250 3/4 1 - 3/16 1/4
O 05001125250DL 1/2 1 - 1/8 1/4 O 07501250250* 3/4 1 - 1/4 1/4
O 05001125312 1/2 1 - 1/8 5/16 O 07501250312DL 3/4 1 - 1/4 5/16
O 05001125375 1/2 1 - 1/8 3/8 O 07501312250 3/4 1 - 5/16 1/4
O 05001250250 1/2 1 - 1/4 1/4 O 07501375250 3/4 1 - 3/8 1/4
O 05621000250DL 9/16 1 1/4 O 07501375312 3/4 1 - 3/8 5/16
O 05621125250DL 9/16 1 - 1/8 1/4 O 07501375375 3/4 1 - 3/8 3/8
O 06250937187 5/8 15/16 3/16 O 07501500250 3/4 1 - 1/2 1/4
O 06251000187 5/8 1 3/16 O 07501500312DL 3/4 1 - 1/2 5/16
O 06251000250 5/8 1 1/4 O 07501500375 3/4 1 - 1/2 3/8
O 06251125250* 5/8 1 - 1/8 1/4 O 07501625312 3/4 1 - 5/8 5/16
Nitrile
*Available in single and double lip (DL) styles.
Part Number I.D. O.D. Height Part Number I.D. O.D. Height
O 07501625375 3/4 1 - 5/8 3/8 O 11251687250DL 1 - 1/8 1 - 11/16 1/4
O 07501750312 3/4 1 - 3/4 5/16 O 11251750312 1 - 1/8 1 - 3/4 5/16
Oil Seals
Part Number I.D. O.D. Height Part Number I.D. O.D. Height
O 13122062312 1 - 5/16 2 - 1/16 5/16 O 15622500312 1 - 9/16 2 - 1/2 5/16
O 13751875250* 1 - 3/8 1 - 7/8 1/4 O 15622500375 1 - 9/16 2 - 1/2 3/8
Oil Seals
O 13751875312 1 - 3/8 1 - 7/8 5/16 O 15622500500DL 1 - 9/16 2 - 1/2 1/2
O 13752000312 1 - 3/8 2 5/16 O 16252000500 1 - 5/8 2 1/2
O 13752000375DL 1 - 3/8 2 3/8 O 16252125250 1 - 5/8 2 - 1/8 1/4
O 13752000500 1 - 3/8 2 1/2 O 16252187375 1 - 5/8 2 - 3/16 3/8
O 13752062250 1 - 3/8 2 - 1/16 1/4 O 16252250312 1 - 5/8 2 - 1/4 5/16
O 13752062375 1 - 3/8 2 - 1/16 3/8 O 16252250375DL 1 - 5/8 2 - 1/4 3/8
O 13752062500 1 - 3/8 2 - 1/16 1/2 O 16252375312 1 - 5/8 2 - 3/8 5/16
O 13752250312DL 1 - 3/8 2 - 1/4 5/16 O 16252375375* 1 - 5/8 2 - 3/8 3/8
O 13752250375DL 1 - 3/8 2 - 1/4 3/8 O 16252437500 1 - 5/8 2 - 7/16 1/2
O 13752250500 1 - 3/8 2 - 1/4 1/2 O 16252500375DL 1 - 5/8 2 - 1/2 3/8
O 13752375375DL 1 - 3/8 2 - 3/8 3/8 O 16252500500* 1 - 5/8 2 - 1/2 1/2
O 13752375500 1 - 3/8 2 - 3/8 1/2 O 16252625375DL 1 - 5/8 2 - 5/8 3/8
O 13752500375DL 1 - 3/8 2 - 1/2 3/8 O 16252750375 1 - 5/8 2 - 3/4 3/8
O 13752500500 1 - 3/8 2 - 1/2 1/2 O 16252750500 1 - 5/8 2 - 3/4 1/2
O 13752625375 1 - 3/8 2 - 5/8 3/8 O 16252875312 1 - 5/8 2 - 7/8 5/16
O 14372000312DL 1 - 7/16 2 5/16 O 16872500375 1 - 11/16 2 - 1/2 3/8
O 14372062312DL 1 - 7/16 2 - 1/16 5/16 O 16872500500 1 - 11/16 2 - 1/2 1/2
O 14372250375 1 - 7/16 2 - 1/4 3/8 O 16872687500 1 - 11/16 2 - 11/16 1/2
O 14372500500 1 - 7/16 2 - 1/2 1/2 O 17502125187 1 - 3/4 2 - 1/8 3/16
O 15002000187 1 - 1/2 2 3/16 O 17502250312 1 - 3/4 2 - 1/4 5/16
O 15002000250 1 - 1/2 2 1/4 O 17502250375DL 1 - 3/4 2 - 1/4 3/8
O 15002000500 1 - 1/2 2 1/2 O 17502312250DL 1 - 3/4 2 - 5/16 1/4
O 15002062250 1 - 1/2 2 - 1/16 1/4 O 17502375312* 1 - 3/4 2 - 3/8 5/16
O 15002062312 1 - 1/2 2 - 1/16 5/16 O 17502375375 1 - 3/4 2 - 3/8 3/8
O 15002125375* 1 - 1/2 2 - 1/8 3/8 O 17502437312 1 - 3/4 2 - 7/16 5/16
O 15002187375 1 - 1/2 2 - 3/16 3/8 O 17502437375 1 - 3/4 2 - 7/16 3/8
O 15002250250 1 - 1/2 2 - 1/4 1/4 O 17502500312* 1 - 3/4 2 - 1/2 5/16
O 15002250312* 1 - 1/2 2 - 1/4 5/16 O 17502500375DL 1 - 3/4 2 - 1/2 3/8
O 15002250375DL 1 - 1/2 2 - 1/4 3/8 O 17502500500 1 - 3/4 2 - 1/2 1/2
O 15002375375DL 1 - 1/2 2 - 3/8 3/8 O 17502562312 1 - 3/4 2 - 9/16 5/16
O 15002375437 1 - 1/2 2 - 3/8 7/16 O 17502625375DL 1 - 3/4 2 - 5/8 3/8
O 15002375500 1 - 1/2 2 - 3/8 1/2 O 17502625500 1 - 3/4 2 - 5/8 1/2
O 15002500312 1 - 1/2 2 - 1/2 5/16 O 17502687437 1 - 3/4 2 - 11/16 7/16
O 15002500375DL 1 - 1/2 2 - 1/2 3/8 O 17502750375DL 1 - 3/4 2 - 3/4 3/8
O 15002500500 1 - 1/2 2 - 1/2 1/2 O 17502750500DL 1 - 3/4 2 - 3/4 1/2
O 15002750375DL 1 - 1/2 2 - 3/4 3/8 O 17502875375DL 1 - 3/4 2 - 7/8 3/8
O 15002750500DL 1 - 1/2 2 - 3/4 1/2 O 17502875500 1 - 3/4 2 - 7/8 1/2
O 15622250375 1 - 9/16 2 - 1/4 3/8 O 17503000375DL 1 - 3/4 3 3/8
O 15622375375 1 - 9/16 2 - 3/8 3/8 O 17503187500 1 - 3/4 3 - 3/16 1/2
Nitrile
*Available in single and double lip (DL) styles.
Part Number I.D. O.D. Height Part Number I.D. O.D. Height
O 18122500250 1 - 13/16 2 - 1/2 1/4 O 22503187500 2 - 1/4 3 - 3/16 1/2
O 18122500375 1 - 13/16 2 - 1/2 3/8 O 22503250500 2 - 1/4 3 - 1/4 1/2
O 18122625375 1 - 13/16 2 - 5/8 3/8 O 22503375375 2 - 1/4 3 - 3/8 3/8
Oil Seals
Part Number I.D. O.D. Height Part Number I.D. O.D. Height
O 28753875500DL 2 - 7/8 3 - 7/8 1/2 O 40004875625DL 4 4 - 7/8 5/8
O 28754000500DL 2 - 7/8 4 1/2 O 40005000375 4 5 3/8
O 29373750375 2 - 15/16 3 - 3/4 3/8 O 40005000500DL 4 5 1/2
Oil Seals
O 30003750375DL 3 3 - 3/4 3/8 O 40005125500DL 4 5 - 1/8 1/2
O 30003875375 3 3 - 7/8 3/8 O 40005250438DL 4 5 - 1/4 7/16
O 30004000375DL 3 4 3/8 O 40005250500 4 5 - 1/4 1/2
O 30004000437 3 4 7/16 O 40005375437 4 5 - 3/8 7/16
O 30004000500DL 3 4 1/2 O 40005500500 4 5 - 1/2 1/2
O 30004375500DL 3 4 - 3/8 1/2 O 42504875375DL 4 - 1/4 4 - 7/8 3/8
O 30004500500DL 3 4 - 1/2 1/2 O 42505250500DL 4 - 1/4 5 - 1/4 1/2
O 30004000500DL 3 4 1/2 O 42505375500 4 - 1/4 5 - 3/8 1/2
O 31254000500 3 - 1/8 4 1/2 O 42505500500DL 4 - 1/4 5 - 1/2 1/2
O 31254125500 3 - 1/8 4 - 1/8 1/2 O 43755375500 4 - 3/8 5 - 3/8 1/2
O 31254500500 3 - 1/8 4 - 1/2 1/2 O 43755500500 4 - 3/8 5 - 1/2 1/2
O 31254500625 3 - 1/8 4 - 1/2 5/8 O 45005250437 4 - 1/2 5 - 1/4 7/16
O 32504000500DL 3 - 1/4 4 1/2 O 45005375437 4 - 1/2 5 - 3/8 7/16
O 32504250250 3 - 1/4 4 - 1/4 1/4 O 45005500437 4 - 1/2 5 - 1/2 7/16
O 32504250437 3 - 1/4 4 - 1/4 7/16 O 45005500500DL 4 - 1/2 5 - 1/2 1/2
O 32504250500DL 3 - 1/4 4 - 1/4 1/2 O 45005750500 4 - 1/2 5 - 3/4 1/2
O 32504500438DL 3 - 1/4 4 - 1/2 7/16 O 45006125562DL 4 - 1/2 6 - 1/8 9/16
O 32504750500DL 3 - 1/4 4 - 3/4 1/2 O 46255625500 4 - 5/8 5 - 5/8 1/2
O 33124500437DL 3 - 5/16 4 - 1/2 7/16 O 47505500375 4 - 3/4 5 - 1/2 3/8
O 33754000500 3 - 3/8 4 1/2 O 47505750500DL 4 - 3/4 5 - 3/4 1/2
O 33754375375DL 3 - 3/8 4 - 3/8 3/8 O 47506000562DL 4 - 3/4 6 9/16
O 33754375500 3 - 3/8 4 - 3/8 1/2 O 47506250500 4 - 3/4 6 - 1/4 1/2
O 33754500500 3 - 3/8 4 - 1/2 1/2 O 49376000500 4 - 15/16 6 1/2
O 35004125375 3 - 1/2 4 - 1/8 3/8 O 50005750437 5 5 - 3/4 7/16
O 35004250500 3 - 1/2 4 - 1/4 1/2 O 50005750500* 5 5 - 3/4 1/2
O 35004375500DL 3 - 1/2 4 - 3/8 1/2 O 50006000500DL 5 6 1/2
O 35004500375* 3 - 1/2 4 - 1/2 3/8 O 50006250500* 5 6 - 1/4 1/2
O 35004500500 3 - 1/2 4 - 1/2 1/2 O 52506250500 5 - 1/4 6 - 1/4 1/2
O 35004750500DL 3 - 1/2 4 - 3/4 1/2 O 55006750625DL 5 - 1/2 6 - 3/4 5/8
O 35005000500 3 - 1/2 5 1/2 O 58756875500DL 5 - 7/8 6 - 7/8 1/2
O 36254625500 3 - 5/8 4 - 5/8 1/2 O 62508000500DL 6 - 1/4 8 1/2
O 36254750500 3 - 5/8 4 - 3/4 1/2 O 65007500625 6 - 1/2 7 - 1/2 5/8
O 37504500500DL 3 - 3/4 4 - 1/2 1/2 O 70008000500* 7 8 1/2
O 37504750500DL 3 - 3/4 4 - 3/4 1/2 O 70008000625 7 8 5/8
O 37505000500 3 - 3/4 5 1/2 O 72508750562 7 - 1/4 8 - 3/4 9/16
O 37505250500 3 - 3/4 5 - 1/4 1/2 O 72508750625 7 - 1/4 8 - 3/4 5/8
O 38754875500 3 - 7/8 4 - 7/8 1/2 O 80009000500 8 9 1/2
O 38755000500DL 3 - 7/8 5 1/2 O 80009000625 8 9 5/8
L2M
O.D.
Height
Oil Seals
Standard Material: Steel case with a stainless steel spring and a Nitrile lip.
The L2M seal is also available in Viton® and Silicone.
Imperial Metric
Garlock Ref. #
Part Number Shaft O.D. Height Shaft O.D. Height
O 78759375687L2M 7.875 9.375 0.687 200.02 238.12 17.45 21238-64X-9176
O 80009500687L2M 8.000 9.500 0.687 203.20 241.30 17.45 21238-64X-3921
O 825010250812L2M 8.250 10.250 0.812 209.55 260.35 20.62 21238-64X-4499
O 83759875687L2M 8.375 9.875 0.687 212.72 250.82 17.45 21238-64X-3933
O 850010000687L2M 8.500 10.000 0.687 215.90 254.00 17.45 21238-64X-8453
O 862510125687L2M 8.625 10.125 0.687 219.07 257.17 17.45 21238-64X-3939
O 875010250687L2M 8.750 10.250 0.687 222.25 260.35 17.45 21238-64X-3946
O 900010500687L2M 9.000 10.500 0.687 228.60 266.70 17.45 21238-64X-3954
O 912510625687L2M 9.125 10.625 0.687 231.77 269.87 17.45 21238-64X-3957
O 925010750687L2M 9.250 10.750 0.687 234.95 273.05 17.45 21238-64X-3963
O 937511375812L2M 9.375 11.375 0.812 238.12 288.92 20.62 21238-64X-4610
O 950011250750L2M 9.500 11.250 0.750 241.30 285.75 19.05 21238-64X-3981
O 950011500812L2M 9.500 11.500 0.812 241.30 292.10 20.62 21238-64X-3984
O 975011250687L2M 9.750 11.250 0.687 247.65 285.75 17.45 21238-64X-3985
O 975011750687L2M 9.750 11.750 0.687 247.65 298.45 17.45 21238-64X-9425
O 1000011500687L2M 10.000 11.500 0.687 254.00 292.10 17.45 21238-64X-3992
O 1000012000812L2M 10.000 12.000 0.812 254.00 304.80 20.62 21238-64X-3997
O 1000012250812L2M 10.000 12.250 0.812 254.00 311.15 20.62 21238-64X-3669
O 1012511625687L2M 10.125 11.625 0.687 257.17 295.27 17.45 21238-64X-3999
O 1012511750687L2M 10.125 11.750 0.687 257.17 298.45 17.45 21238-64X-5989
O 1025011750687L2M 10.250 11.750 0.687 260.35 298.45 17.45 21238-64X-4004
O 1050012000687L2M 10.500 12.000 0.687 266.70 304.80 17.45 21238-64X-4011
O 1050012500812L2M 10.500 12.500 0.812 266.70 317.50 20.62 21238-64X-4017
O 1075012250687L2M 10.750 12.250 0.687 273.05 311.15 17.45 21238-64X-4023
O 1075012500875L2M 10.750 12.500 0.875 273.05 317.50 22.22 21238-64X-4033
O 1075012750625L2M 10.750 12.750 0.625 273.05 323.85 15.87 21238-64X-3014
O 1087512375687L2M 10.875 12.375 0.687 276.22 314.32 17.45 21238-64X-4027
O 1087512500687L2M 10.875 12.500 0.687 276.22 317.50 17.45 21238-64X-4028
O 1100012500687L2M 11.000 12.500 0.687 279.40 317.50 17.45 21238-64X-4611
O 1100013500687L2M 11.000 13.500 0.687 279.40 342.90 17.45 21238-64X-3060
O 1125012750750L2M 11.250 12.750 0.750 285.75 323.85 19.05 21238-64X-4046
O 1125012750687L2M 11.250 12.750 0.687 285.75 323.85 17.45 21238-64X-4527
O 1125013250812L2M 11.250 13.250 0.812 285.75 336.55 20.62 21238-64X-4047
Imperial Metric
Garlock Ref. #
Part Number Shaft O.D. Height Shaft O.D. Height
O 1150013000687L2M 11.500 13.000 0.687 292.10 330.20 17.45 21238-64X-4057
O 1150013500812L2M 11.500 13.500 0.812 292.10 342.90 20.62 21238-64X-4063
Oil Seals
O 1175013250687L2M 11.750 13.250 0.687 298.45 336.55 17.45 21238-64X-4064
O 1200013500687L2M 12.000 13.500 0.687 304.80 342.90 17.45 21238-64X-4612
O 1200014000750L2M 12.000 14.000 0.750 304.80 355.60 19.05 21238-64X-4071
O 1200014000812L2M 12.000 14.000 0.812 304.80 355.60 20.62 21238-64X-4072
O 1225013750687L2M 12.250 13.750 0.687 311.15 349.25 17.45 21238-64X-4613
O 1225013750875L2M 12.250 13.750 0.875 311.15 349.25 22.22 21238-64X-4614
O 1225014250812L2M 12.250 14.250 0.812 311.15 361.95 20.62 21238-64X-4075
O 1237513875687L2M 12.375 13.875 0.687 314.32 352.42 17.45 21238-64X-4076
O 1237514000687L2M 12.375 14.000 0.687 314.32 355.60 17.45 21238-64X-4056
O 1250014000687L2M 12.500 14.000 0.687 317.50 355.60 17.45 21238-64X-4079
O 1275014250687L2M 12.750 14.250 0.687 323.85 361.95 17.45 21238-64X-4089
O 1300014500687L2M 13.000 14.500 0.687 330.20 368.30 17.45 21238-64X-4093
O 1300015000812L2M 13.000 15.000 0.812 330.20 381.00 20.62 21238-64X-4099
O 1325014750687L2M 13.250 14.750 0.687 336.55 374.65 17.45 21238-64X-4101
O 1325014875687L2M 13.250 14.875 0.687 336.55 377.82 17.45 21238-64X-7734
O 1350015000687L2M 13.500 15.000 0.687 342.90 381.00 17.45 21238-64X-4121
O 1350015500812L2M 13.500 15.500 0.812 342.90 393.70 20.62 21238-64X-4128
O 1375015750812L2M 13.750 15.750 0.812 349.25 400.05 20.62 21238-64X-4129
O 1393715437687L2M 13.937 15.437 0.687 353.99 392.09 17.45 21238-64X-4130
O 1400015500687L2M 14.000 15.500 0.687 355.60 393.70 17.45 21238-64X-4131
O 1400015750750L2M 14.000 15.750 0.750 355.60 400.05 19.05 21238-64X-4134
O 1400015750687L2M 14.000 15.750 0.687 355.60 400.05 17.45 21238-64X-5991
O 1400016000812L2M 14.000 16.000 0.812 355.60 406.40 20.62 21238-64X-4135
O 1425015750687L2M 14.250 15.750 0.687 361.95 400.05 17.45 21238-64X-4118
O 1425016250812L2M 14.250 16.250 0.812 361.95 412.75 20.62 21238-64X-4140
O 1450016000687L2M 14.500 16.000 0.687 368.30 406.40 17.45 21238-64X-4142
O 1450016500812L2M 14.500 16.500 0.812 368.30 419.10 20.62 21238-64X-4145
O 1462516750812L2M 14.625 16.750 0.812 371.47 425.45 20.62 21238-64X-3857
O 1475016250687L2M 14.750 16.250 0.687 374.65 412.75 17.45 21238-64X-4147
O 1475016500687L2M 14.750 16.500 0.687 374.65 419.10 17.45 21238-64X-5990
O 1487516500687L2M 14.875 16.500 0.687 377.82 419.10 17.45 21238-64X-3858
O 1500016500750L2M 15.000 16.500 0.750 381.00 419.00 19.05 21238-64X-3067
O 1500016500687L2M 15.000 16.500 0.687 381.00 419.10 17.45 21238-64X-4151
O 1500017000812L2M 15.000 17.000 0.812 381.00 431.80 20.62 21238-64X-4156
O 1525016750687L2M 15.250 16.750 0.687 387.35 425.45 17.45 21238-64X-4615
O 1525017250875L2M 15.250 17.250 0.875 387.35 438.15 22.22 21238-64X-3030
O 1531217312687L2M 15.312 17.312 0.687 388.92 439.72 17.45 21238-64X-5992
O 1550017500812L2M 15.500 17.500 0.812 393.70 444.40 20.62 21238-64X-4163
O 1575017250687L2M 15.750 17.250 0.687 400.05 438.15 17.45 21238-64X-4170
O 1600017000687L2M 16.000 17.000 0.687 406.40 444.50 17.45 21238-64X-4177
L2M
Imperial Metric
Garlock Ref. #
Part Number Shaft O.D. Height Shaft O.D. Height
O 1600018000812L2M 16.000 18.000 0.812 406.40 457.20 20.62 21238-64X-4180
O 1600018000875L2M 16.000 18.000 0.875 406.40 457.20 22.22 21238-64X-5077
Oil Seals
Imperial Metric
Garlock Ref. #
Part Number Shaft O.D. Height Shaft O.D. Height
O 2100023000875L2M 21.000 23.000 0.875 533.40 584.20 22.22 21238-64X-4253
O 2125023250875L2M 21.250 23.250 0.875 539.75 590.55 22.22 21238-64X-5254
Oil Seals
O 2150023250750L2M 21.500 23.250 0.750 546.10 590.55 19.05 21238-64X-4257
O 2150023500875L2M 21.500 23.500 0.875 546.10 596.90 22.22 21238-64X-4259
O 2162423625875L2M 21.624 23.625 0.875 549.27 600.07 22.22 21238-64X-4263
O 2175023250750L2M 21.750 23.250 0.750 552.45 590.55 19.05 21238-64X-4621
O 2175023750875L2M 21.750 23.750 0.875 552.45 603.25 22.22 21238-64X-4265
O 2200023500750L2M 22.000 23.500 0.750 558.80 596.90 19.05 21238-64X-4269
O 2200024000875L2M 22.000 24.000 0.875 558.80 609.60 22.22 21238-64X-4270
O 2225024250875L2M 22.250 24.250 0.875 565.15 615.95 22.22 21238-64X-3764
O 2243724437750L2M 22.437 24.437 0.750 569.89 620.70 19.05 21238-64X-6480
O 2250024000750L2M 22.500 24.000 0.750 571.50 609.60 19.05 21238-64X-4271
O 2250024500875L2M 22.500 24.500 0.875 571.50 622.30 22.22 21238-64X-4279
O 2275024750875L2M 22.750 24.750 0.875 577.85 628.65 22.22 21238-64X-4281
O 2300024500750L2M 23.000 24.500 0.750 584.20 622.30 19.05 21238-64X-4283
O 2300025000875L2M 23.000 25.000 0.875 584.20 635.00 22.22 21238-64X-4284
O 2300025500875L2M 23.000 25.500 0.875 584.20 647.70 22.22 21238-64X-4285
O 2350025500875L2M 23.500 25.500 0.875 596.90 647.70 22.22 21238-64X-4288
O 2356225375750L2M 23.562 25.375 0.750 598.47 644.52 19.05 21238-64X-4291
O 2362526000875L2M 23.625 26.000 0.875 600.07 660.40 22.22 21238-64X-4292
O 2375025250100L2M 23.750 25.250 1.000 603.25 641.35 25.40 21238-64X-6239
O 2387526000875L2M 23.875 26.000 0.875 606.42 660.40 22.22 21238-64X-4293
O 2400025500750L2M 24.000 25.500 0.750 609.60 647.70 19.05 21238-64X-4623
O 2400026000875L2M 24.000 26.000 0.875 609.60 660.40 22.22 21238-64X-4294
O 2400026000812L2M 24.000 26.000 0.812 609.60 660.40 20.62 21238-64X-4295
O 2400026000750L2M 24.000 26.000 0.750 609.60 660.40 19.05 21238-64X-9988
O 2425026250875L2M 24.250 26.250 0.875 615.95 666.75 22.22 21238-64X-4301
O 2443726000750L2M 24.437 26.000 0.750 620.69 660.40 19.05 21238-64X-4302
O 2443726937100L2M 24.437 26.937 1.000 620.69 684.15 25.40 21238-64X-9990
O 2450026500875L2M 24.500 26.500 0.875 622.30 673.10 22.22 21238-64X-4305
O 2500026500750L2M 25.000 26.500 0.750 635.00 673.10 19.05 21238-64X-4308
O 2500027000875L2M 25.000 27.000 0.875 635.00 685.80 22.22 21238-64X-3774
O 2518726875750L2M 25.187 26.875 0.750 639.75 682.62 19.05 21238-64X-4311
O 3300035250875L2M 33.000 35.250 0.875 838.20 895.35 22.22 21238-64X-4326
O 3300035500875L2M 33.000 35.500 0.875 838.20 901.70 22.22 21238-64X-4544
O 3350035500875L2M 33.500 35.500 0.875 850.90 901.70 22.22 21238-64X-4389
O 3350036000875L2M 33.500 36.000 0.875 850.90 914.40 22.22 21238-64X-4550
O 3400036000875L2M 34.000 36.000 0.875 863.60 914.40 22.22 21238-64X-4399
O 3400036500750L2M 34.000 36.500 0.750 863.60 927.10 19.05 21238-64X-3056
O 3425036000750L2M 34.250 36.000 0.750 869.95 914.40 19.05 21238-64X-3017
O 3450036500100L2M 34.500 36.500 1.000 876.30 927.10 25.40 21238-64X-3021
O 3450036500875L2M 34.500 36.500 0.875 876.30 927.10 22.22 21238-64X-4405
L2M
Imperial Metric
Garlock Ref. #
Part Number Shaft O.D. Height Shaft O.D. Height
O 3500037000875L2M 35.000 37.000 0.875 889.00 939.80 22.22 21238-64X-3835
O 3500037500875L2M 35.000 37.500 0.875 889.00 952.50 22.22 21238-64X-3836
Oil Seals
Oil Seals
Standard Material: The standard L1M is composed of a steel outer case, a steel filler ring, a stainless steel finger spring
and a Nitrile/PTFE sealing element. The sealing element is also available in Highly Saturated Nitrile/ PTFE, Silicone/PTFE
and Fluorocarbon/PTFE.
Imperial Metric
Garlock Ref. #
Part Number Shaft O.D. Height Shaft O.D. Height
O 38754875500L1M 3.875 4.875 0.500 98.42 123.82 12.70 53X-2501
O 40635125500L1M 4.063 5.125 0.500 103.20 130.17 12.70 53X-2570
O 43755375500L1M 4.375 5.375 0.500 111.12 136.52 12.70 53X-2708
O 46875750500L1M 4.687 5.750 0.500 119.04 146.05 12.70 53X-2819
O 48756000500L1M 4.875 6.000 0.500 123.82 152.40 12.70 53X-2873
O 50006250562L1M 5.000 6.250 0.562 127.00 158.75 14.27 53X-2922
O 55007000500L1M 5.500 7.000 0.500 139.70 177.80 12.70 53X-3188
O 56226785625L1M 5.622 6.874 0.625 142.80 174.60 15.87 53X-3192
O 57506875500L1M 5.750 6.875 0.500 146.05 174.62 12.70 53X-3278
O 57507000500L1M 5.750 7.000 0.500 146.05 177.80 12.70 53X-3293
O 58756875500L1M 5.875 6.875 0.500 149.23 174.62 12.70 53X-3316
O 58757000500L1M 5.875 7.000 0.500 149.23 177.80 12.70 53X-3319
O 58757125500L1M 5.875 7.125 0.500 149.23 180.98 12.70 53X-3322
O 60007000500L1M 6.000 7.000 0.500 152.40 177.80 12.70 53X-3355
O 60007250504L1M 6.000 7.250 0.504 152.40 184.15 12.80 53X-3361
O 60007250625L1M 6.000 7.250 0.625 152.40 184.15 15.87 53X-3363
O 60007500500L1M 6.000 7.500 0.500 152.40 190.50 12.70 53X-3367
O 62507750750L1M 6.250 7.750 0.750 158.75 196.85 19.05 53X-3405
O 65007500625L1M 6.500 7.500 0.625 165.10 190.50 15.87 53X-3426
O 65008000625L1M 6.500 8.000 0.625 165.10 203.20 15.87 53X-3434
O 66257743625L1M 6.625 7.743 0.625 168.27 196.67 15.87 53X-3436
O 67507750625L1M 6.750 7.750 0.625 171.45 196.85 15.87 53X-3456
O 67508000625L1M 6.750 8.000 0.625 171.45 203.20 15.87 53X-3460
O 70008000625L1M 7.000 8.000 0.625 177.80 203.20 15.87 53X-3492
O 70008500625L1M 7.000 8.500 0.625 177.80 215.90 15.87 53X-3500
O 71258250625L1M 7.125 8.250 0.625 180.97 209.55 15.87 53X-3508
O 72508500625L1M 7.250 8.500 0.625 184.15 215.90 15.87 53X-3522
O 72508750625L1M 7.250 8.750 0.625 184.15 222.25 15.88 53X-3526
O 78759375687L1M 7.875 9.375 0.687 200.02 238.12 17.45 53X-9176
O 79379125625L1M 7.937 9.125 0.625 201.59 231.77 15.87 53X-3590
O 80009000625L1M 8.000 9.000 0.625 203.20 228.60 15.87 53X-3592
L1M
Imperial Metric
Garlock Ref. #
Part Number Shaft O.D. Height Shaft O.D. Height
O 80009500625L1M 8.000 9.500 0.625 203.20 241.30 15.87 53X-3600
O 80009500687L1M 8.000 9.500 0.687 203.20 241.30 17.45 53X-3921
Oil Seals
Imperial Metric
Garlock Ref. #
Part Number Shaft O.D. Height Shaft O.D. Height
O 1075012250687L1M 10.750 12.250 0.687 273.05 311.15 17.45 53X-4023
O 1075012500875L1M 10.750 12.500 0.875 273.05 317.50 22.22 53X-4033
Oil Seals
O 1075012750625L1M 10.750 12.750 0.625 273.05 323.85 15.87 53X-3014
O 1075012750812L1M 10.750 12.750 0.812 273.05 323.85 20.62 53X-4031
O 1087512500687L1M 10.875 12.500 0.687 276.22 317.50 17.45 53X-4028
O 1100012500625L1M 11.000 12.500 0.625 279.40 317.50 15.87 53X-3693
O 1100012500687L1M 11.000 12.500 0.687 279.40 317.50 17.45 53X-4611
O 1100013000812L1M 11.000 13.000 0.812 279.40 330.20 20.62 53X-4036
O 1100013500687L1M 11.000 13.500 0.687 279.40 342.90 17.45 53X-3060
O 1102375591363L1M 11.024 13.386 0.812 280.00 340.00 20.62 53X-4039
O 1125012750687L1M 11.250 12.750 0.687 285.75 323.85 17.45 53X-4527
O 1125012750750L1M 11.250 12.750 0.750 285.75 323.85 19.05 53X-4046
O 1125013250812L1M 11.250 13.250 0.812 285.75 336.55 20.62 53X-4047
O 1137513375812L1M 11.375 13.375 0.812 288.92 339.72 20.62 53X-4052
O 1137512875750L1M 11.375 12.875 0.750 288.93 327.02 19.05 53X-4050
O 1150013000687L1M 11.500 13.000 0.687 292.10 330.20 17.45 53X-4057
O 1150013000750L1M 11.500 13.000 0.750 292.10 330.20 19.05 53X-3083
O 1150013500750L1M 11.500 13.500 0.750 292.10 342.90 19.05 53X-4062
O 1150013500812L1M 11.500 13.500 0.812 292.10 342.90 20.62 53X-4063
O 1175013250687L1M 11.750 13.250 0.687 298.45 336.55 17.45 53X-4064
O 1200013500687L1M 12.000 13.500 0.687 304.80 342.90 17.45 53X-4612
O 1200013625965L1M 12.000 13.625 0.768 304.80 346.08 19.50 53X-4068
O 1200014000750L1M 12.000 14.000 0.750 304.80 355.60 19.05 53X-4071
O 1200014000812L1M 12.000 14.000 0.812 304.80 355.60 20.62 53X-4072
O 1225013750687L1M 12.250 13.750 0.687 311.15 349.25 17.45 53X-4613
O 1225013750875L1M 12.250 13.750 0.875 311.15 349.25 22.22 53X-4614
O 1225014250812L1M 12.250 14.250 0.812 311.15 361.95 20.62 53X-4075
O 1237513875687L1M 12.375 13.875 0.687 314.32 352.42 17.45 53X-4076
O 1237514000687L1M 12.375 14.000 0.687 314.32 355.60 17.45 53X-4056
O 1250014000687L1M 12.500 14.000 0.687 317.50 355.60 17.45 53X-4079
O 1250014500812L1M 12.500 14.500 0.812 317.50 368.30 20.62 53X-4083
O 1275014250687L1M 12.750 14.250 0.687 323.85 361.95 17.45 53X-4089
O 1275015000812L1M 12.750 15.000 0.812 323.85 381.00 20.62 53X-4092
O 1300014500687L1M 13.000 14.500 0.687 330.20 368.30 17.45 53X-4093
O 1300014500750L1M 13.000 14.500 0.750 330.20 368.30 19.05 53X-4094
O 1300015000812L1M 13.000 15.000 0.812 330.20 381.00 20.62 53X-4099
O 1300015000100L1M 13.000 15.000 1.000 330.20 381.00 25.40 53X-4100
O 1325014750687L1M 13.250 14.750 0.687 336.55 374.65 17.45 53X-4101
O 1325014875490L1M 13.250 14.875 0.687 336.55 377.82 17.45 53X-7734
O 1350015000687L1M 13.500 15.000 0.687 342.90 381.00 17.45 53X-4121
O 1350015250750L1M 13.500 15.250 0.750 342.90 387.35 19.05 53X-3052
O 1350015500812L1M 13.500 15.500 0.812 342.90 393.70 20.62 53X-4128
O 1375015750812L1M 13.750 15.750 0.812 349.25 400.05 20.62 53X-4129
O 1393715437687L1M 13.937 15.437 0.687 353.99 392.09 17.45 53X-4130
L1M
Imperial Metric
Garlock Ref. #
Part Number Shaft O.D. Height Shaft O.D. Height
O 1400015500687L1M 14.000 15.500 0.687 355.60 393.70 17.45 53X-4131
O 1400015750687L1M 14.000 15.750 0.687 355.60 400.05 17.45 53X-5991
Oil Seals
Imperial Metric
Garlock Ref. #
Part Number Shaft O.D. Height Shaft O.D. Height
O 1750019500687L1M 17.500 19.500 0.687 444.50 495.30 17.45 53X-4198
O 176251925687L1M 17.625 19.250 0.687 447.67 488.95 17.45 53X-4199
Oil Seals
O 1787519875812L1M 17.875 19.875 0.812 454.02 504.82 20.62 53X-4204
O 1800019500687L1M 18.000 19.500 0.687 457.20 495.30 17.45 53X-4206
O 1800020000875L1M 18.000 20.000 0.875 457.20 508.00 22.22 53X-4210
O 1837519875687L1M 18.375 19.875 0.687 466.72 504.82 17.45 53X-4213
O 1837520000750L1M 18.375 20.000 0.750 466.72 508.00 19.05 53X-4215
O 1850020000687L1M 18.500 20.000 0.687 469.90 508.00 17.45 53X-3768
O 1850020500812L1M 18.500 20.500 0.812 469.90 520.70 20.62 53X-3068
O 1850020500875L1M 18.500 20.500 0.875 469.90 520.70 22.22 53X-4216
O 1889720472787L1M 18.897 20.472 0.787 479.98 519.98 19.98 53X-7281
O 1900020500750L1M 19.000 20.500 0.750 482.60 520.70 19.05 53X-4218
O 1900021000875L1M 19.000 21.000 0.875 482.60 533.40 22.22 53X-4219
O 1900021500875L1M 19.000 21.500 0.875 482.60 546.10 22.22 53X-3773
O 1925020750750L1M 19.250 20.750 0.750 488.95 527.05 19.05 53X-4617
O 1950021500875L1M 19.500 21.500 0.875 495.30 546.10 22.22 53X-4221
O 1975021750875L1M 19.750 21.750 0.875 501.65 552.45 22.22 53X-4228
O 1993721687625L1M 19.937 21.687 0.625 506.39 550.84 15.87 53X-4233
O 2000021500750L1M 20.000 21.500 0.750 508.00 546.10 19.05 53X-4235
O 2000021750750L1M 20.000 21.750 0.750 508.00 552.45 19.05 53X-4236
O 2000022000875L1M 20.000 22.000 0.875 508.00 558.80 22.22 53X-4237
O 2000022000100L1M 20.000 22.000 1.000 508.00 558.80 25.40 53X-3179
O 2025021750750L1M 20.250 21.750 0.750 514.35 552.45 19.05 53X-4239
O 2050022000750L1M 20.500 22.000 0.750 520.70 558.80 19.05 53X-4619
O 2050022500875L1M 20.500 22.500 0.875 520.70 571.50 22.22 53X-4246
O 2075022750875L1M 20.750 22.750 0.875 527.05 577.85 22.22 53X-4248
O 2086522836812L1M 20.866 22.836 0.812 529.99 580.03 20.62 53X-4244
O 2100022500750L1M 21.000 22.500 0.750 533.40 571.50 19.05 53X-5259
O 2100022750750L1M 21.000 22.750 0.750 533.40 577.85 19.05 53X-5312
O 2100023000875L1M 21.000 23.000 0.875 533.40 584.20 22.22 53X-4253
O 2125023000750L1M 21.250 23.000 0.750 539.75 584.20 19.05 53X-4255
O 2125023250875L1M 21.250 23.250 0.875 539.75 590.55 22.22 53X-4254
O 2150023250750L1M 21.500 23.250 0.750 546.10 590.55 19.05 53X-4257
O 2150023500875L1M 21.500 23.500 0.875 546.10 596.90 22.22 53X-4259
O 2162523625875L1M 21.625 23.625 0.875 549.27 600.07 22.22 53X-4263
O 2175023250750L1M 21.750 23.250 0.750 552.45 590.55 19.05 53X-4621
O 2175023750875L1M 21.750 23.750 0.875 552.45 603.25 22.22 53X-4265
O 2200023500750L1M 22.000 23.500 0.750 558.80 596.90 19.05 53X-4269
O 2200024000875L1M 22.000 24.000 0.875 558.80 609.60 22.22 53X-4270
O 2225024250875L1M 22.250 24.250 0.875 565.15 615.95 22.22 53X-3764
O 2243624000750L1M 22.437 24.000 0.750 569.89 609.60 19.05 53X-4275
O 2243624437750L1M 22.437 24.437 0.750 569.89 620.69 19.05 53X-6480
O 2250024000750L1M 22.500 24.000 0.750 571.50 609.60 19.05 53X-4271
O 2250024500875L1M 22.500 24.500 0.875 571.50 622.30 22.22 53X-4279
L1M
Imperial Metric
Garlock Ref. #
Part Number Shaft O.D. Height Shaft O.D. Height
O 2275024750875L1M 22.750 24.750 0.875 577.85 628.65 22.22 53X-4281
O 2300024500750L1M 23.000 24.500 0.750 584.20 622.30 19.05 53X-4283
Oil Seals
Imperial Metric
Garlock Ref. #
Part Number Shaft O.D. Height Shaft O.D. Height
O 2850030500875L1M 28.500 30.500 0.875 723.90 774.70 22.22 53X-4346
O 2875030750875L1M 28.750 30.750 0.875 730.25 781.05 22.22 53X-4628
Oil Seals
O 2900030500750L1M 29.000 30.500 0.750 736.60 774.70 19.05 53X-4347
O 2900031000875L1M 29.000 31.000 0.875 736.60 787.40 22.22 53X-4348
O 2950031500875L1M 29.500 31.500 0.875 749.30 800.10 22.22 53X-4352
O 2950031500100L1M 29.500 31.500 1.000 749.30 800.10 25.40 53X-3791
O 3000031496591L1M 30.000 31.496 0.591 762.00 800.00 15.00 53X-3048
O 3000032000875L1M 30.000 32.000 0.875 762.00 812.80 22.22 53X-4357
O 3000032250875L1M 30.000 32.250 0.875 762.00 819.15 22.22 53X-4323
O 3050032500875L1M 30.500 32.500 0.875 774.70 825.50 22.22 53X-4365
O 3050033000875L1M 30.500 33.000 0.875 774.70 838.20 22.22 53X-8577
O 3100033000875L1M 31.000 33.000 0.875 787.40 838.20 22.22 53X-4367
O 3125033250750L1M 31.250 33.250 0.750 793.75 844.55 19.05 53X-5033
O 3175033750875L1M 31.750 33.750 0.875 806.45 857.25 22.22 53X-5016
O 3200033500750L1M 32.000 33.500 0.750 812.80 850.90 19.05 53X-3023
O 3200034000875L1M 32.000 34.000 0.875 812.80 863.60 22.22 53X-4632
O 3212534125750L1M 32.125 34.125 0.750 815.98 866.77 19.05 53X-3002
O 3212534125875L1M 32.125 34.125 0.875 815.97 866.77 22.22 53X-4371
O 3231234500875L1M 32.312 34.500 0.875 820.72 876.30 22.22 53X-4373
O 3250034500875L1M 32.500 34.500 0.875 825.50 876.30 22.22 53X-4377
O 3295335000875L1M 32.953 35.000 0.875 837.00 889.00 22.22 53X-3009
O 3300034500750L1M 33.000 34.500 0.750 838.20 876.30 19.05 53X-4381
O 3300034625750L1M 33.000 34.625 0.750 838.20 879.47 19.05 53X-6787
O 3300034650787L1M 33.000 34.650 0.787 838.20 880.10 20.00 53X-4634
O 3300035000875L1M 33.000 35.000 0.875 838.20 889.00 22.22 53X-4382
O 3300035250875L1M 33.000 35.250 0.875 838.20 895.35 22.22 53X-4326
O 3300035500875L1M 33.000 35.500 0.875 838.20 901.70 22.22 53X-4544
O 3350035500875L1M 33.500 35.500 0.875 850.90 901.70 22.22 53X-4389
O 3350036000875L1M 33.500 36.000 0.875 850.90 914.40 22.22 53X-4550
O 3400036000875L1M 34.000 36.000 0.875 863.60 914.40 22.22 53X-4399
O 3400036500750L1M 34.000 36.500 0.750 863.60 927.10 19.05 53X-3056
O 3400036500875L1M 34.000 36.500 0.875 863.60 927.10 22.22 53X-4400
O 3425036000750L1M 34.250 36.000 0.750 869.95 914.40 19.05 53X-3017
O 3450036500875L1M 34.500 36.500 0.875 876.30 927.10 22.22 53X-4405
O 3450036500875L1M 34.500 36.500 0.875 876.30 927.10 22.22 53X-3021
O 3500037000875L1M 35.000 37.000 0.875 889.00 939.80 22.22 53X-3835
O 3500037500875L1M 35.000 37.500 0.875 889.00 952.50 22.22 53X-3836
O 3500038000875L1M 35.000 38.000 0.875 889.00 965.20 22.22 53X-3837
O 3525037250875L1M 35.250 37.250 0.875 895.35 946.15 22.22 53X-4416
O 3537537375875L1M 35.375 37.375 0.875 898.52 949.32 22.22 53X-4417
O 3550037500875L1M 35.500 37.500 0.875 901.70 952.50 22.22 53X-4553
O 3600038000875L1M 36.000 38.000 0.875 914.40 965.20 22.22 53X-4421
O 3600038500591L1M 36.000 38.500 0.591 914.40 977.90 15.00 53X-3095
O 3600038500100L1M 36.000 38.500 1.000 914.40 977.90 25.40 53X-9993
L1M
Imperial Metric
Garlock Ref. #
Part Number Shaft O.D. Height Shaft O.D. Height
O 3650038500875L1M 36.500 38.500 0.875 927.10 977.90 22.22 53X-4430
O 3650038500100L1M 36.500 38.500 1.000 927.10 977.90 25.40 53X-3084
Oil Seals
O.D.
I.D.
Oil Seals
SE - ___ ___
Height
Dash Number
Material information is available on the next page. For assistance selecting the
correct braided packing, please contact a Hi-Tech Seals’ sales representative.
Product Description:
Braided packing is a rope like material which is cut into rings that wrap around the rod. Once installed the compression
force generated by tightening of the gland produces radial pressure. Since braided packing expands radially when
compressed, the gland tolerances can be more flexible than when using vee packing.
Hi-Tech Seals distributes braided packing based on weight, measured in pounds. However, Arochem, Kombilon,
Univerdit, Carbosteam and Ramilon are distributed in kg units. If you would like the estimated feet/pound of specific
materials please contact Hi-Tech Seals.
Part Numbers:
PKG - ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___
Example: PKG 3753000G10LB - 10 pound package of material 3000G braided packing - 3/8” C/S
Braided Packing
Material Max. Temp.
300 Description: Aramid Filament is impregnated with PTFE and an inert lubricant. 260°C
Application: A pump and valve packing, suitable for slurry and abrasive service.
320 Description: Kynol impregnated with PTFE suspensoid. 260°C
Application: Pumps and valves. Not suitable for sulfuric acid or strong bases.
344 Description: PTFE fibre impregnated with PTFE suspensoid. 260°C
Application: Valve service with extreme chemicals.
344BIL Description: Pure PTFE fibre impregnated with PTFE suspensoid and an inert break in lubricant. 260°C
Application: Pump service with extreme chemicals. Not suitable with molten alkalis.
344FDA Description: FDA grade PTFE filament impregnated with PTFE suspensoid. 260°C
Application: Valve service with extreme chemicals requiring FDA grade packing.
345 Description: Flax and ramie fibres impregnated with PTFE suspensoid and an inert lubricant. 90°C
Application: Marine applications.
895 Description: Uncoated soft annealed copper wire. 540°C
Application: Acts as an anti-extrusion ring.
921 Description: Flax and ramie fibres are impregnated with tallow and wax lubricants. 90°C
Application: Cold water, brine and marine services.
921G Description: Flax and ramie fibres are impregnated with tallow and the surface is lubricated with 90°C
graphite.
Application: Heavy duty hydraulic packing used in marine applications involving oil or cold water.
3000G Description: An special acrylic yarn blend impregnated with high temperature lubricant and finished 230°C
with particulate graphite.
Application: Economical general purpose pump and valve service.
3000T Description: A special acrylic yarn blend impregnated with PTFE suspensoid. An inert lubricant is 260°C
added for ease of start up.
Application: General pump and valve service.
3000TK Description: A special acrylic yarn blend impregnated with PTFE suspensoid. An inert lubricant is 260°C
added for ease of start up. This braided packing material also has Aramid corners.
Application: High speed pumps where non-contaminating packing is desired.
Braided Packing
Material Max. Temp.
8000TK Description: GFO® fibre yarn braided with Aramid corners. 260°C
Application: Pump packing which provides abrasion and extrusion resistance.
8010 Description: Anti-friction lead foil is twisted over a soft fibreglass core. High temperature oil 230°C
and graphite lubricant is added.
Application: Boiler feed pumps or it can be used as an end ring in conjunction with other
packing where extrusion exists.
8011 Description: Anti-friction aluminum foil is twisted over a fibreglass core. High temperature oil 540°C
and graphite lubricant is added.
Application: For use in boiler feed pumps, in abrasive solutions and for use as an anti-extrusion
ring.
8012 Description: Anti-friction lead foil. High temperature oil and graphite lubricant is added. 230°C
Application: Boiler feed pumps or it can be used as an end ring in conjunction with other
packing where extrusion exists.
8013 Description: Anti-friction aluminum foil. High temperature oil and graphite lubricant is added. 540°C
Application: For use in boiler feed pumps, in abrasive solutions and for use as an anti-extrusion
ring.
8100BIL Description: A dense but soft lubricated PTFE/graphite braided packing. 275°C
Application: Pump packing which provides anti-extrusion properties.
8200BIL Description: A dense PTFE/graphite braided packing. 275°C
Application: Economical multi-purpose packing.
Arochem Description: Arochem (6212) is aramid yarn with PTFE. 280°C
Application: Plunger pumps. Provides strong chemical resistance.
Kombilon Description: Kombilon(6742) is a carbon and PTFE yarn. 280°C
Application: Ideal for rotary pumps and works well in agitators for the paper and chemical
industries.
Univerdit Description: Univerdit (7000) is a PTFE/graphite compound. 250°C
Application: Pump and valve packing. Provides good resistance to gas permeation.
Carbosteam Description: Carbosteam (6550) is made of flexible carbon yarns impregnated with graphite. 399°C
Application: Suitable for high temperature, high pressure and it is extrusion resistant.
Ramilon Description: Ramilon (4586) is PTFE impregnated fibers. 120°C
Application: Economical water pump packing.
Caps & Plugs (CP) Hydraulic Fitting Bolted Flange Stud-hole Flange Stud-hole Flange
Plugs (HF) Protector (BFP) Protector (FC) Protector (FC)
Valve-Flange Tool Joint Protector Sucker Rod Cap EUE Sleeve Mesh
Protector (FP) (TJP) (SR) & Plugs (FPS) (SM)
Product Description:
Hi-Tech Seals’ protector products are excellent for preventing damage to your equipment during storage or transport.
Additional protector products are available upon request.
F
D
C
Protectors
E
A
B
Composed of low density Polyethylene.
Dimensions
Part Number A B C D E F
CP 0 0.174 0.241 0.110 0.177 0.410 0.380
CP 1 0.239 0.303 0.175 0.239 0.380 0.470
CP 1X 0.267 0.335 0.205 0.273 0.410 0.470
CP 2 0.299 0.367 0.235 0.303 0.410 0.500
CP 2X 0.331 0.397 0.267 0.333 0.380 0.560
CP 3 0.362 0.428 0.298 0.364 0.410 0.560
CP 3X 0.392 0.459 0.328 0.395 0.410 0.590
CP 4 0.422 0.486 0.358 0.422 0.410 0.620
CP 4X 0.448 0.512 0.384 0.448 0.410 0.660
CP 5 0.472 0.548 0.408 0.484 0.470 0.690
CP 5X 0.500 0.568 0.436 0.504 0.470 0.720
CP 6 0.533 0.608 0.469 0.544 0.470 0.750
CP 6X 0.551 0.633 0.487 0.569 0.500 0.780
CP 241S 0.552 0.612 0.490 0.550 0.340 0.750
CP 7 0.580 0.668 0.518 0.606 0.530 0.840
CP 7X 0.610 0.695 0.549 0.634 0.530 0.840
CP 8 0.642 0.729 0.578 0.665 0.500 0.880
CP 8X 0.678 0.755 0.614 0.691 0.530 0.880
CP 9 0.691 0.787 0.627 0.723 0.590 0.940
CP 9X 0.727 0.825 0.663 0.761 0.590 1.000
CP 710 0.750 0.805 0.688 0.743 0.190 0.860
CP 10 0.752 0.849 0.688 0.785 0.590 1.000
CP 11 0.803 0.912 0.739 8.480 0.660 1.060
CP 11x 0.819 0.933 0.755 0.869 0.620 1.130
CP 12 0.869 0.973 0.805 0.909 0.660 1.130
CP 12X 0.915 1.040 0.855 0.980 0.720 1.160
CP 13 0.967 1.092 0.903 1.028 0.780 1.250
CP 249W 0.975 1.104 0.918 1.047 0.750 1.440
CP 13B 0.980 1.049 0.916 0.985 0.500 1.250
CP 13X 0.997 1.144 0.933 1.080 0.780 1.310
CP 14 1.093 1.219 1.029 1.155 0.780 1.410
CP 14X 1.179 1.286 1.115 1.222 0.750 1.440
CP 15 1.226 1.354 1.162 1.290 0.750 1.500
CP 15X 1.233 1.358 1.175 1.300 0.840 1.500
Dimensions
Part Number A B C D E F
CP 16 1.312 1.465 1.248 1.401 0.750 1.620
CP 17B 1.344 1.507 1.282 1.445 0.940 1.770
CP 17 1.451 1.601 1.387 1.537 0.750 1.750
CP 17S 1.519 1.602 1.455 1.538 0.750 1.750
CP 18 1.560 1.682 1.498 1.620 0.780 1.880
CP 18X 1.633 1.750 1.569 1.690 0.750 1.840
CP 19 1.752 1.882 1.688 1.818 0.780 2.000
CP 20 1.807 1.938 1.743 1.874 1.000 2.160
CP 210 1.847 2.000 1.783 1.936 1.030 2.130
CP 21 1.903 2.078 1.839 2.014 1.030 2.250
CP 220 1.981 2.133 1.917 2.069 1.000 2.250
CP 22S 2.017 2.147 1.953 2.083 0.750 2.310
CP 221 2.070 2.244 2.000 2.174 1.040 2.470
CP 230 2.136 2.312 2.074 2.250 1.030 2.560
CP 240 2.300 2.464 2.236 2.400 1.030 2.620
CP 33A 2.311 2.650 2.247 2.586 1.000 2.780
CP 250 2.396 2.604 2.332 2.540 1.160 2.810
CP 43A 2.457 2.750 2.395 2.688 1.000 2.880
CP 33A1 2.482 2.645 2.418 2.581 0.660 2.780
CP 44 2.641 2.790 2.579 2.728 0.784 2.970
CP 45A 2.720 2.990 2.656 2.926 1.000 3.130
CP 500 2.850 2.982 2.786 2.918 0.750 3.250
CP 55A 2.980 3.244 2.910 3.174 1.000 3.380
CP 53 2.996 3.159 2.916 3.079 0.470 3.410
CP 96A 3.270 3.562 3.200 3.492 1.120 3.690
CP 501 3.320 3.452 3.250 3.382 0.750 3.630
CP 1050 3.466 3.602 3.406 3.542 0.750 3.880
CP 341 3.552 3.732 3.478 3.658 1.000 4.000
CP 1052 3.676 3.802 3.596 3.722 0.750 4.000
CP 1063 3.928 4.074 3.848 3.994 0.750 4.380
CP 1070 4.214 4.459 4.134 4.379 1.000 4.940
CP 1072 4.368 4.622 4.288 4.542 1.000 5.000
CP 407 4.980 5.100 4.900 5.020 0.690 5.440
CP 344 5.326 5.494 5.217 5.385 0.880 5.880
CP 345 5.470 5.620 5.390 5.540 1.000 6.130
CP 351 6.008 6.184 5.918 6.094 1.000 6.630
CP 352 6.398 6.564 6.329 6.500 0.880 6.940
CP 365 6.668 6.774 6.562 6.668 1.500 7.190
CP 367 7.338 7.656 7.253 7.575 1.000 7.940
CP 368 7.658 7.846 7.574 7.762 1.000 8.120
CP 369 7.968 8.146 7.877 8.120 1.000 8.380
Protectors
HF - ___ ___ ___ ___
B
Dash Number
A
Protectors
B
BFP - ___ ___ ___ ___ ___ ___ ___ ___
Protectors
FC - ___ ___ ___ ___ ___
LB Pipe Size
Part Number LB Nominal Pipe Size Part Number LB Nominal Pipe Size
FC 1501 150 1” FC 3001 300 1”
FC 15015 150 1 - 1/2” FC 30015 300 1 - 1/2”
FC 1502 150 2” FC 3002 300 2”
FC 1503 150 3” FC 3003 300 3”
FC 1504 150 4” FC 3004 300 4”
FC 1506 150 6“ FC 3006 300 6”
FC 1508 150 8” FC 30010 300 10”
FC 15010 150 10” FC 30012 300 12”
FC 15012 150 12”
Part Number LB Nominal Pipe Size Part Number LB Nominal Pipe Size
FC 3008 300 8” FC 60012 600 12”
FC 6002 600 2” FC 9003 900 3”
FC 6004 600 4” FC 9004 900 4”
FC 6006 600 6” FC 9006 900 6”
FC 6008 600 8” FC 15002 1500 2”
FC 60010 600 10” FC 15003 1500 3”
Valve-Flange Protector
Flange
Thickness D
C
Protectors
A
B
Nominal Dimensions
Part Number Pipe Size A B C D E
FP 109 1/2 0.540 0.585 0.500 1.440 0.250
FP 110 3/4 0.720 0.750 0.500 1.688 0.030
FP 111 1 0.940 0.970 0.625 2.000 0.030
FP 112 1 - 1/4 1.360 1.400 0.625 2.560 0.040
FP 113 1 - 1/2 1.600 1.640 0.750 2.875 0.040
FP 114 2 2.040 2.100 0.750 3.625 0.050
FP 115 2 - 1/2 2.440 2.500 0.750 4.125 0.050
FP 1151 2 - 1/2 2.440 2.500 0.750 5.125 0.050
FP 116 3 3.014 3.150 0.730 6.050 0.050
FP 117 3 - 1/2 3.510 3.635 0.750 5.590 0.060
FP 118 4 4.000 4.140 0.980 6.310 0.060
FP 119 5 5.020 5.080 1.000 7.312 0.060
FP 120 6 6.040 6.100 1.000 8.500 0.060
P - Pin (Cap)
Size Thread Type B - Box (Plug)
Protectors
Part Number Size Thread Type Type Part Number Size Thread Type Type
TJP 2375IFP 2 - 3/8” IF PIN TJP 4500REGP 4 - 1/2” REG PIN
TJP 2375IFB 2 - 3/8” IF BOX TJP 4500REGB 4 - 1/2” REG BOX
TJP 2375MWJP 2 - 3/8” Mayhew JR PIN TJP 4500H90P 4 - 1/2” H90 PIN
TJP 2375MWJB 2 - 3/8” Mayhew JR BOX TJP 4500H90B 4 - 1/2” H90 BOX
TJP 2375PACP 2 - 3/8” PAC PIN TJP 5000H90P 5” H90 PIN
TJP 2375PACB 2 - 3/8” PAC BOX TJP 5000H90B 5’ H90 BOX
TJP 2375REGP 2 - 3/8” REG PIN TJP 5500REGP 5 - 1/2” REG PIN
TJP 2375REGB 2 - 3/8” REG BOX TJP 5500REGB 5 - 1/2” REG BOX
TJP 2875H90P 2 - 7/8” H90 PIN TJP 5500IFP 5 - 1/2” IF PIN
TJP 2875H90B 2 - 7/8” H90 BOX TJP 5500IFB 5 - 1/2” IF BOX
TJP 2875IFP 2 - 7/8” IF PIN TJP 5500H90P 5 - 1/2” H90 PIN
TJP 2875IFB 2 - 7/8” IF BOX TJP 5500H90B 5 - 1/2” H90 BOX
TJP 2875REGP 2 - 7/8” REG PIN TJP 6625IFP 6 - 5/8” IF PIN
TJP 2875REGB 2 - 7/8” REG BOX TJP 6625IFB 6 - 5/8” IF BOX
TJP 2875PACP 2 - 7/8” PAC PIN TJP 6625H90P 6 - 5/8” H90 PIN
TJP 2875PACB 2 - 7/8” PAC BOX TJP 6625H90B 6 - 5/8” H90 BOX
TJP 3500REGP 3 - 1/2” REG PIN TJP 6625REGP 6 - 5/8” REG PIN
TJP 3500REGB 3 - 1/2” REG BOX TJP 6625REGB 6 - 5/8” REG BOX
TJP 3500IFP 3 - 1/2” IF PIN TJP 7625REGP 7 - 5/8” REG PIN
TJP 3500IFB 3 - 1/2” IF BOX TJP 7625REGB 7 - 5/8” REG BOX
TJP 4000H90P 4” H90 PIN TJP 7625H90P 7 - 5/8” H90 PIN
TJP 4000H90B 4” H90 BOX TJP 7625H90B 7 - 5/8” H90 BOX
EUE Style
Part Number Size Type Part Number Size Type
EUE 1500B 1 - 1/2" BOX EUE 3500B 3 - 1/2" BOX
EUE 1500P 1 - 1/2" PIN EUE 3500P 3 - 1/2" PIN
EUE 2375B 2 - 3/8" BOX EUE 4000B 4" BOX
EUE 2375P 2 - 3/8" PIN EUE 4000P 4" PIN
EUE 2875B 2 - 7/8" BOX EUE 4500B 4 - 1/2" BOX
EUE 2875P 2 - 7/8" PIN EUE 4500P 4 - 1/2" PIN
P - Pin (Cap)
Size
B - Box (Plug)
A B
Protectors
Dimensions
Part Number Rod Size A B C
SR 5 5/8” 0.935 1.240 1.680
SR 6 3/4” 1.062 1.500 1.940
SR 7 7/8” 1.188 1.630 2.160
SR 8 1” 1.375 2.000 2.470
SR 9 1 - 1/8” 1.563 2.250 2.750
A C
Dimensions
Part Number Coupling Size A B C
FPS 5 5/8” 0.975 0.380 1.380
FPS 6 3/4” 1.100 0.380 1.500
FPS 7 7/8” 1.225 0.380 1.690
FPS 8 1” 1.415 0.380 2.000
Protectors
Dash Number MINI - Length 1
MAXI - Length 2
Non-Sealed Sealed
Product Description:
The standard radial spherical plain bearing is characterized by an outer ring with a single split in the axial direction. The
outer and inner ring are made of chrome steel that is hardened and phosphate treated.
The sliding surface is treated with molybdenum disulfide. In addition to the treated sliding surface, the bearing receives
lubrication through ports on the inner and outer bearing wall. Due to the molybdenum disulfide treatment and ability to
self-lubricate, these bearings experience high wear resistance. This bearing performs well in applications exposed to dusty
environments.
Part Numbers:
SBB - GEZ ___ ___ ___ ES - ___ ___ ___
I.D.
(mm) Blank - Unsealed Style
2RS - Sealed Style
Example: SBB - GEZ25ES - Steel-on-steel, radial, maintenance required, spherical ball bearing - 1.000” I.D., 1.625” O.D.
D
C
Additional styles and sizes available upon request.
Metal Materials:
Brass
Carbon Steel
Product Description:
Sealing washers are a modification of the standard washer design. Common washers are used to help evenly distribute
the load of the bolt. With a sealing washer you benefit from a molded elastomer lining which helps prevent fluids from
leaking through bolt holes.
Part Numbers:
___ ___ ___ - ___ ___ ___ ___
I.D.
ST - Fastener Seal
TS - Threaded Seal
BS - Bonded Seal
Example: ST - 1000 - Fastener Seal - Intended for a 1.000” Thread Diameter, the seal has a 0.988” I.D., 1.760” O.D.
D
C A B
Washers
600 Series
A B C D
Part Thread I.D. Diameter O.D.
Fastener Size Retainer Thickness
Number Diameter ± 0.010 Max. ± 0.010
ST 138 #6 0.138 0.130 0.229 0.385 0.040 ± 0.004
ST 164 #8 0.164 0.156 0.255 0.385 0.040 ± 0.004
ST 190 #10 0.190 0.180 0.317 0.443 0.050 ± 0.005
ST 190OS #10 OS 0.190 0.186 0.365 0.468 0.050 ± 0.005
ST 250 1/4 0.250 0.240 0.381 0.505 0.050 ± 0.005
ST 250OS 1/4 OS 0.250 0.245 0.422 0.531 0.050 ± 0.005
ST 312 5/16 0.312 0.301 0.488 0.603 0.050 ± 0.005
ST 375 3/8 0.375 0.364 0.546 0.666 0.050 ± 0.005
ST 437 7/16 0.438 0.427 0.618 0.760 0.050 ± 0.005
ST 500 1/2 0.500 0.490 0.696 0.880 0.050 ± 0.005
ST 562 9/16 0.562 0.552 0.759 1.067 0.050 ± 0.005
ST 625 5/8 0.625 0.615 0.818 1.193 0.050 ± 0.005
ST 688 11/16 0.688 0.674 0.898 1.260 0.050 ± 0.005
ST 750 3/4 0.750 0.740 0.982 1.322 0.064 ± 0.005
ST 812 13/16 0.812 0.798 1.048 1.416 0.064 ± 0.005
ST 875 7/8 0.875 0.864 1.105 1.510 0.064 ± 0.005
ST 938 15/16 0.938 0.921 1.172 1.635 0.064 ± 0.005
ST 1000 1 1.000 0.988 1.234 1.760 0.064 ± 0.005
ST 1062 1 - 1/16 1.063 1.050 1.290 1.822 0.064 ± 0.005
ST 1125 1 - 1/8 1.125 1.106 1.351 1.885 0.064 ± 0.005
ST 1188 1 - 3/16 1.188 1.167 1.442 1.947 0.064 ± 0.005
ST 1250 1 - 1/4 1.250 1.229 1.474 2.010 0.064 ± 0.005
ST 1312 1 - 5/16 1.313 1.290 1.567 2.072 0.064 ± 0.005
ST 1375 1 - 3/8 1.375 1.352 1.631 2.135 0.064 ± 0.005
ST 1438 1 - 7/16 1.438 1.413 1.693 2.197 0.064 ± 0.005
ST 1500 1 - 1/2 1.500 1.475 1.817 2.260 0.091 ± 0.005
ST 1625 1 - 5/8 1.625 1.600 1.942 2.385 0.091 ± 0.005
ST 1750 1 - 3/4 1.750 1.725 2.067 2.510 0.091 ± 0.005
ST 1875 1 - 7/8 1.875 1.850 2.192 2.635 0.091 ± 0.005
ST 2000 2 2.000 1.975 2.317 2.760 0.091 ± 0.005
ST 3000 3 3.000 2.975 3.430 5.500 0.120 ± 0.005
Thread Seal
T B
C
Washers
O.D.
750 Series
T A B C
Retainer
Part UNC UNF O.D.
Thickness Clearance Min. Dia. of
Number (Coarse) (Fine) ± 0.010 Bore Depth
± 0.005 Diameter Mating Surface
TS 006 32 40 0.406 0.050 0.143/0.149 3/8 3/64
TS 008 32 36 0.406 0.050 0.170/0.177 3/8 3/64
TS 010 24 32 0.469 0.050 0.198/0.206 3/8 1/16
TS 012 24 28 0.562 0.050 0.224/0.234 7/16 1/16
TS 250 20 28 0.562 0.050 0.260/0.271 7/16 1/16
TS 312 18 24 0.687 0.064 0.327/0.339 1/2 1/16
TS 375 16 24 0.750 0.064 0.392/0.406 5/8 1/16
TS 437 14 20 0.906 0.078 0.458/0.474 11/16 1/16
TS 500 13 20 1.000 0.078 0.523/0.541 3/4 1/16
TS 562 12 18 1.094 0.094 0.589/0.609 7/8 1/16
TS 625 11 18 1.187 0.094 0.654/0.676 1 1/16
TS 750 10 16 1.375 0.109 0.788/0.812 1 - 1/8 3/32
TS 875 9 14 1.562 0.109 0.921/0.947 1 - 1/4 3/32
TS 1000 8 12 1.750 0.120 1.054/1.082 1 - 7/16 3/32
TS 1125 8* 12 1.875 0.120 1.187/1.217 1 - 9/16 3/16
TS 1250 8* 12 2.000 0.120 1.321/1.353 1 - 11/16 3/16
TS 1375 8* 12 2.125 0.120 1.454/1.488 1 - 13/16 3/16
TS 1500 8* 12 2.250 0.120 1.587/1.623 1 - 15/16 3/16
TS 1750 5 N/A 3.375 0.179 1.865/1.920 2 - 7/16 3/8
Size 1 - 1/8 to 1 - 1/2 are not designed for standard coarse threads.
Washers
B A
400 Series
A B C D
Part Metal
Number Bolt Size O.D. I.D. Thickness Total Height
BS 250 1/4 0.520 0.270 0.051 0.074
BS 312 5/16 0.560 0.340 0.051 0.074
BS 375 3/8 0.625 0.408 0.083 0.113
BS 437 7/16 0.750 0.460 0.083 0.113
BS 500 1/2 0.810 0.541 0.083 0.113
BS 562 9/16 0.875 0.585 0.083 0.113
BS 625 5/8 1.000 0.650 0.083 0.113
BS 687 11/16 1.000 0.715 0.097 0.127
BS 750 3/4 1.060 0.775 0.097 0.127
BS 812 13/16 1.125 0.848 0.097 0.127
BS 875 7/8 1.250 0.925 0.097 0.127
BS 1000 1 1.375 1.065 0.097 0.127
BS 1062 1 - 1/16 1.520 1.095 0.097 0.127
BS 1187 1 - 3/16 1.500 1.213 0.097 0.127
BS 1312 1 - 5/16 1.685 1.334 0.133 0.163
BS 1375 1 - 3/8 1.750 1.415 0.133 0.163
BS 1500 1 - 1/2 1.880 1.534 0.133 0.163
BS 1625 1 - 5/8 2.062 1.690 0.133 0.163
BS 1750 1 - 3/4 2.250 1.905 0.133 0.163
BS 1875 1 - 7/8 2.307 1.907 0.133 0.163
BS 2125 2 - 1/8 2.750 2.161 0.133 0.163
BS 2250 2 - 1/4 2.770 2.285 0.133 0.163
Product Description:
With the increased mechanization of facility equipment, it is becoming more and more essential to use proper
vibration and noise reduction components. Paulstra parts can help improve working conditions, as well as extend the
life of your machinery. Paulstra products are used by a diverse group of industries including: Aerospace, Automotive,
Civil Engineering, Electronics, Food & Beverage, HVAC, Heavy Machinery Production, Marine, Military, Naval, Power
Generation, and Rail Vehicle Systems.
Through Hi-Tech Seals you gain access to engineering support and the full Paulstra family of products. For part number
and dimension information visit www.paulstra-vibrachoc.com/.
Part Numbers:
PAU - ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___
Paulstra Reference #
O-Rings
PTFE -200°C to 250°C
Product Description:
O-rings are designed for both static and dynamic applications. A properly designed O-ring groove allows the O-ring
to be squeezed diametrically out-of-round even before the application of pressure. The O-ring seals by distortion of its
resilient elastic compound to fill the leakage path. Metric O-rings are available in standards DIN 3771, BS4518, ISO 3601,
European sizes and JIS sizes. Hi-Tech Seals also offers O-rings meeting different standards and custom sizes.
Part Numbers:
___ ___ ___ - ___ ___ ___ ___ ___ ___
Prefix (Material/Durometer):
O-Rings: MN7, MN8, MN9, MV7, MV8, MV9, ME7, MH7, MH8, MH9,
Prefix C/S I.D.* MS7, MA7, MTO, MU8, MU9, MK7, MK9
* The fourth I.D. digit is added to the part number when the I.D. contains a decimal place.
Seal Tolerances
I.D.
C/S
O-Rings
O-Rings
W
E/2
D
Information is based on DIN. 3771.
D E W
Diametrical Groove Width Max.
C/S ± Gland Depth ±
Clearance (+0.13/-0.00) Eccentricity
1.00 0.08 0.72 0.02 0.10 1.35 0.05
1.20 0.08 0.87 0.02 0.10 1.60 0.05
1.50 0.08 1.09 0.02 0.10 2.00 0.05
1.60 0.08 1.16 0.03 0.10 2.10 0.05
1.78 - 1.80 0.08 1.29 0.03 0.10 2.35 0.05
1.90 0.08 1.38 0.03 0.10 2.50 0.05
2.00 0.08 1.45 0.04 0.10 2.65 0.05
2.40 0.08 1.90 0.04 0.10 3.25 0.05
2.50 0.08 1.98 0.04 0.10 3.40 0.05
2.62 0.08 2.07 0.04 0.10 3.55 0.05
3.00 0.08 2.40 0.04 0.15 4.05 0.07
3.50 - 3.53 0.10 2.82 0.05 0.15 4.75 0.07
3.60 0.10 2.88 0.05 0.15 4.85 0.07
4.00 0.10 3.20 0.06 0.15 5.40 0.07
4.50 0.10 3.64 0.06 0.15 6.00 0.07
5.00 0.13 4.04 0.06 0.15 6.70 0.10
5.33- 5.34 0.13 4.31 0.08 0.15 7.15 0.10
5.50 0.13 4.45 0.08 0.15 7.35 0.10
5.70 0.13 4.61 0.08 0.15 7.65 0.10
6.00 0.13 4.91 0.08 0.18 8.15 0.13
6.99 0.15 5.72 0.10 0.18 9.50 0.13
7.00 0.15 5.73 0.10 0.18 9.55 0.13
7.50 0.15 6.14 0.10 0.18 10.20 0.13
8.00 0.15 6.55 0.10 0.18 10.90 0.13
8.40 0.15 6.87 0.15 0.18 11.45 0.13
W
O-Rings
D W
Groove Width
Hydraulic Pneumatic
C/S ± Gland Depth ±
(+0.13/-0.00) (± 0.13)
1.00 0.08 0.75 0.02 1.45 1.20
1.20 0.08 0.90 0.02 1.75 1.45
1.50 0.08 1.13 0.02 2.20 1.80
1.60 0.08 1.20 0.03 2.35 1.90
1.78 - 1.80 0.08 1.34 0.03 2.60 2.15
1.90 0.08 1.43 0.03 2.75 2.30
2.00 0.08 1.51 0.04 2.90 2.40
2.40 0.08 1.82 0.04 3.20 2.80
2.50 0.08 1.90 0.04 3.30 2.90
2.62 0.08 1.99 0.04 3.50 3.05
3.00 0.08 2.27 0.04 3.90 3.45
3.50 - 3.53 0.10 2.67 0.05 4.60 4.05
3.60 0.10 2.72 0.05 4.70 4.10
4.00 0.10 3.03 0.06 5.25 4.60
4.50 0.10 3.60 0.06 6.10 5.10
5.00 0.13 4.00 0.06 6.80 5.70
5.33 0.13 4.26 0.08 7.25 6.05
5.50 0.13 4.40 0.08 7.45 6.25
5.70 0.13 4.56 0.08 7.75 6.50
6.00 0.13 4.98 0.08 8.00 6.75
6.99 0.15 5.80 0.10 9.05 7.85
7.00 0.15 5.81 0.10 9.05 7.90
7.50 0.15 6.23 0.10 9.70 8.40
8.00 0.15 6.64 0.10 10.35 9.00
8.40 0.15 6.97 0.15 10.90 9.45
W E/2
O-Rings
Information is based on DIN. 3771.
D E W
Diametral Groove Width Max.
C/S ± Gland Depth ±
Clearance (+0.13/-0.00) Eccentricity
1.00 0.08 0.80 0.02 0.10 1.35 0.05
1.20 0.08 0.96 0.02 0.10 1.60 0.05
1.50 0.08 1.20 0.02 0.10 2.00 0.05
1.60 0.08 1.28 0.03 0.10 2.10 0.05
1.78 - 1.80 0.08 1.42 0.03 0.10 2.40 0.05
1.90 0.08 1.52 0.03 0.10 2.50 0.05
2.00 0.08 1.60 0.04 0.10 2.65 0.05
2.40 0.08 2.06 0.04 0.10 3.25 0.05
2.50 0.08 2.15 0.04 0.10 3.40 0.05
2.62 0.08 2.25 0.04 0.10 3.55 0.05
3.00 0.08 2.61 0.04 0.15 4.05 0.07
3.50 - 3.53 0.10 3.07 0.05 0.15 4.75 0.07
3.60 0.10 3.13 0.05 0.15 4.85 0.07
4.00 0.10 3.48 0.05 0.15 5.40 0.07
4.50 0.10 3.99 0.05 0.15 6.00 0.07
5.00 0.13 4.44 0.05 0.15 6.70 0.10
5.33- 5.34 0.13 4.73 0.05 0.15 7.15 0.10
5.50 0.13 4.88 0.05 0.15 7.40 0.10
5.70 0.13 5.06 0.05 0.15 7.60 0.10
6.00 0.13 5.19 0.05 0.18 8.15 0.13
6.99 0.15 6.05 0.05 0.18 9.50 0.13
7.00 0.15 6.06 0.05 0.18 9.55 0.13
7.50 0.15 6.49 0.05 0.18 10.20 0.13
8.00 0.15 6.92 0.05 0.18 10.90 0.13
8.40 0.15 7.27 0.05 0.18 11.45 0.13
Part C/S I.D. Cross Part C/S I.D. Cross Part C/S I.D. Cross
O-Rings
Number (mm) (mm) Ref. # Number (mm) (mm) Ref. # Number (mm) (mm) Ref. #
1000115 1.00 1.15 100205 1.00 20.50 15006 1.50 6.00
1000125 1.00 1.25 10021 1.00 21.00 150065 1.50 6.50 S7
100015 1.00 1.50 100215 1.00 21.50 15007 1.50 7.00
100018 1.00 1.80 10022 1.00 22.00 150075 1.50 7.50 S8
10002 1.00 2.00 100225 1.00 22.50 15008 1.50 8.00
100025 1.00 2.50 10023 1.00 23.00 150085 1.50 8.50 S9
100027 1.00 2.70 100235 1.00 23.50 15009 1.50 9.00
10003 1.00 3.00 10024 1.00 24.00 150095 1.50 9.50 S 10
100033 1.00 3.30 100245 1.00 24.50 15010 1.50 10.00
100035 1.00 3.50 10025 1.00 25.00 150105 1.50 10.50
10004 1.00 4.00 10028 1.00 28.00 150107 1.50 10.70 S 11.2
100045 1.00 4.50 100294 1.00 29.40 15011 1.50 11.00
10005 1.00 5.00 100299 1.00 29.90 150115 1.50 11.50 S 12
100055 1.00 5.50 100305 1.00 30.50 15012 1.50 12.00 S 12.5
10006 1.00 6.00 100318 1.00 31.80 150125 1.50 12.50
100065 1.00 6.50 10032 1.00 32.00 15013 1.50 13.00
10007 1.00 7.00 10039 1.00 39.00 1501325 1.50 13.25
100072 1.00 7.20 10042 1.00 42.00 150135 1.50 13.50 S 14
100075 1.00 7.50 10060 1.00 60.00 15014 1.50 14.00
10008 1.00 8.00 -001 1.02 0.74 -001 15015 1.50 15.00
100085 1.00 8.50 120025 1.20 2.50 150155 1.50 15.50 S 16
10009 1.00 9.00 120026 1.20 2.60 15016 1.50 16.00
100095 1.00 9.50 120035 1.20 3.50 150165 1.50 16.50
10010 1.00 10.00 12005 1.20 5.00 15017 1.50 17.00
100105 1.00 10.50 12024 1.20 24.00 150175 1.50 17.50 S 18
10011 1.00 11.00 12026 1.20 26.00 15018 1.50 18.00
100115 1.00 11.50 12028 1.20 28.00 150185 1.50 18.50
10012 1.00 12.00 12035 1.20 35.00 15019 1.50 19.00
100125 1.00 12.50 12040 1.20 40.00 150195 1.50 19.50 S 20
10013 1.00 13.00 120535 1.20 53.50 15020 1.50 20.00
100135 1.00 13.50 12098 1.20 98.00 150205 1.50 20.50
10014 1.00 14.00 -002 1.27 1.07 -002 15021 1.50 21.00
100145 1.00 14.50 150018 1.50 1.80 150215 1.50 21.5 S 22
10015 1.00 15.00 1500185 1.50 1.85 15022 1.50 22.00
100155 1.00 15.50 15002 1.50 2.00 150225 1.50 22.50
10016 1.00 16.00 150025 1.50 2.50 S3 15023 1.50 23.00
100165 1.00 16.50 150028 1.50 2.80 150235 1.50 23.50
10017 1.00 17.00 15003 1.50 3.00 15024 1.50 24.00
10018 1.00 18.00 150035 1.50 3.50 S4 150245 1.50 24.50
100185 1.00 18.50 15004 1.50 4.00 15025 1.50 25.00
10019 1.00 19.00 150045 1.50 4.50 S5 150255 1.50 25.50
100195 1.00 19.50 15005 1.50 5.00 15026 1.50 26.00
10020 1.00 20.00 150055 1.50 5.50 S6 150265 1.50 26.50
O-Rings
15030 1.50 30.00 15071 1.50 71.00 160131 1.60 13.10
150305 1.50 30.50 15072 1.50 72.00 160141 1.60 14.10
15031 1.50 31.00 15073 1.50 73.00 160151 1.60 15.10
150315 1.50 31.50 15074 1.50 74.00 160161 1.60 16.10
15032 1.50 32.00 15075 1.50 75.00 160171 1.60 17.10
150325 1.50 32.50 15076 1.50 76.00 160181 1.60 18.10
15033 1.50 33.00 15077 1.50 77.00 160191 1.60 19.10
150335 1.50 33.50 15078 1.50 78.00 160203 1.60 20.30
15034 1.50 34.00 15079 1.50 79.00 160211 1.60 21.10
150345 1.50 34.50 15080 1.50 80.00 160221 1.60 22.10
15035 1.50 35.00 15081 1.50 81.00 160251 1.60 25.10
150355 1.50 35.50 15082 1.50 82.00 160271 1.60 27.10
15036 1.50 36.00 15083 1.50 83.00 160291 1.60 29.10
150365 1.50 36.50 15084 1.50 84.00 160321 1.60 32.10
15037 1.50 37.00 15085 1.50 85.00 160351 1.60 35.10
150375 1.50 37.50 15086 1.50 86.00 160371 1.60 37.10
15038 1.50 38.00 15087 1.50 87.00 160511 1.60 51.10
150385 1.50 38.50 15088 1.50 88.00 160860 1.60 86.00
15039 1.50 39.00 15089 1.50 89.00 160966 1.60 96.60
150395 1.50 39.50 15090 1.50 90.00 16115 1.60 115.00
15040 1.50 40.00 15091 1.50 91.00 -004 1.78 1.78 -004
15041 1.50 41.00 15092 1.50 92.00 -005 1.78 2.57 -005
15042 1.50 42.00 15093 1.50 93.00 -006 1.78 2.90 -006
15043 1.50 43.00 15094 1.50 94.00 -007 1.78 3.68 -007
15044 1.50 44.00 15095 1.50 95.00 -008 1.78 4.47 -008
15045 1.50 45.00 15096 1.50 96.00 -009 1.78 5.28 -009
15046 1.50 46.00 15097 1.50 97.00 -010 1.78 6.07 -010
15047 1.50 47.00 15098 1.50 98.00 -011 1.78 7.65 -011
15048 1.50 48.00 15099 1.50 99.00 -012 1.78 9.25 -012
15049 1.50 49.00 15100 1.50 100.00 -013 1.78 10.82 -013
15050 1.50 50.00 15105 1.50 105.00 -014 1.78 12.42 -014
15051 1.50 51.00 15145 1.50 145.00 -015 1.78 14.00 -015
15052 1.50 52.00 -003 1.52 1.42 -003 -016 1.78 15.60 -016
15053 1.50 53.00 160022 1.60 2.20 -017 1.78 17.17 -017
15054 1.50 54.00 1600275 1.60 2.75 -018 1.78 18.77 -018
15055 1.50 55.00 160028 1.60 2.80 -019 1.78 20.35 -019
15056 1.50 56.00 160031 1.60 3.10 -020 1.78 21.95 -020
15057 1.50 57.00 160032 1.60 3.20 -021 1.78 23.52 -021
15058 1.50 58.00 160037 1.60 3.70 -022 1.78 25.12 -022
15059 1.50 59.00 160041 1.60 4.10 -023 1.78 26.70 -023
15060 1.50 60.00 160047 1.60 4.70 -024 1.78 28.30 -024
15061 1.50 61.00 160050 1.60 5.00 -025 1.78 29.87 -025
15062 1.50 62.00 160051 1.60 5.10 -026 1.78 31.47 -026
15063 1.50 63.00 160061 1.60 6.10 -027 1.78 33.05 -027
15064 1.50 64.00 160068 1.60 6.80 -028 1.78 34.65 -028
Part C/S I.D. Cross Part C/S I.D. Cross Part C/S I.D. Cross
Number (mm) (mm) Ref. # Number (mm) (mm) Ref. # Number (mm) (mm) Ref. #
-029 1.78 37.82 -029 180118 1.80 11.80 200135 2.00 13.50
-030 1.78 41.00 -030 180125 1.80 12.50 20014 2.00 14.00
-031 1.78 44.17 -031 180132 1.80 13.20 200145 2.00 14.50
-032 1.78 47.35 -032 18014 1.80 14.00 20015 2.00 15.00
-033 1.78 50.52 -033 18015 1.80 15.00 200155 2.00 15.50
-034 1.78 53.70 -034 18016 1.80 16.00 20016 2.00 16.00
O-Rings
-035 1.78 56.87 -035 18017 1.80 17.00 200165 2.00 16.50
-036 1.78 60.05 -036 190024 1.90 2.40 20017 2.00 17.00
-037 1.78 63.22 -037 190026 1.90 2.60 200175 2.00 17.50
-038 1.78 66.40 -038 190028 1.90 2.80 P3 20018 2.00 18.00
-039 1.78 69.57 -039 190034 1.90 3.40 200185 2.00 18.50
-040 1.78 72.75 -040 190037 1.90 3.70 20019 2.00 19.00
-041 1.78 75.92 -041 190038 1.90 3.80 P4 200195 2.00 19.50
-042 1.78 82.27 -042 190042 1.90 4.20 20020 2.00 20.00
-043 1.78 88.62 -043 190048 1.90 4.80 P5 200205 2.00 20.50
-044 1.78 94.97 -044 190049 1.90 4.90 20021 2.00 21.00
-045 1.78 101.32 -045 190057 1.90 5.70 200215 2.00 21.50
-046 1.78 107.67 -046 190058 1.90 5.80 P6 200219 2.00 21.90 S 22.4
-047 1.78 114.02 -047 190064 1.90 6.40 20022 2.00 22.00
-048 1.78 120.37 -048 190068 1.90 6.80 P7 200225 2.00 22.50
-049 1.78 126.72 -049 190072 1.90 7.20 20023 2.00 23.00
-050 1.78 133.07 -050 190078 1.90 7.80 P8 200235 2.00 23.50 S 24
180018 1.80 1.80 19008 1.90 8.00 20024 2.00 24.00
18002 1.80 2.00 190088 1.90 8.80 P9 200245 2.00 24.50 S 25
1800224 1.80 2.24 190089 1.90 8.90 20025 2.00 25.00
180025 1.80 2.50 190098 1.90 9.80 P 10 200255 2.00 25.50 S 26
180028 1.80 2.80 20002 2.00 2.00 20026 2.00 26.00
1800315 1.80 3.15 200025 2.00 2.50 200265 2.00 26.50
1800355 1.80 3.55 200026 2.00 2.60 20027 2.00 27.00
1800375 1.80 3.75 20003 2.00 3.00 200275 2.00 27.50 S 28
18004 1.80 4.00 200035 2.00 3.50 20028 2.00 28.00
180045 1.80 4.50 20004 2.00 4.00 200285 2.00 28.50 S 29
1800487 1.80 4.87 200045 2.00 4.50 20029 2.00 29.00
18005 1.80 5.00 200046 2.00 4.60 200295 2.00 29.50 S 30
1800515 1.80 5.15 20005 2.00 5.00 20030 2.00 30.00
180053 1.80 5.30 200055 2.00 5.50 200305 2.00 30.50
180056 1.80 5.60 20006 2.00 6.00 20031 2.00 31.00 S 31.5
18006 1.80 6.00 200065 2.00 6.50 200315 2.00 31.50 S 32
180063 1.80 6.30 20007 2.00 7.00 20032 2.00 32.00
180067 1.80 6.70 200075 2.00 7.50 200325 2.00 32.50
180069 1.80 6.90 20008 2.00 8.00 20033 2.00 33.00
180071 1.80 7.10 200085 2.00 8.50 200335 2.00 33.50 S 34
180075 1.80 7.50 20009 2.00 9.00 20034 2.00 34.00
18008 1.80 8.00 200094 2.00 9.40 200345 2.00 34.50 S 35
180085 1.80 8.50 20010 2.00 10.00 20035 2.00 35.00 S 35.5
1800876 1.80 8.76 200105 2.00 10.50 200355 2.00 35.50 S 36
18009 1.80 9.00 20011 2.00 11.00 20036 2.00 36.00
180095 1.80 9.50 200115 2.00 11.50 200365 2.00 36.50
18010 1.80 10.00 20012 2.00 12.00 20037 2.00 37.00
180106 1.80 10.60 200125 2.00 12.50 200375 2.00 37.50 S 38
180112 1.80 11.20 20013 2.00 13.00 20038 2.00 38.00
O-Rings
20043 2.00 43.00 20079 2.00 79.00 240033 2.40 3.30
200435 2.00 43.50 S 44 200795 2.00 79.50 S 80 240036 2.40 3.60
20044 2.00 44.00 20080 2.00 80.00 240043 2.40 4.30
200445 2.00 44.50 S 45 20081 2.00 81.00 240046 2.40 4.60
20045 2.00 45.00 20082 2.00 82.00 240053 2.40 5.30
200455 2.00 45.50 S 46 20083 2.00 83.00 240055 2.40 5.50
20046 2.00 46.00 20084 2.00 84.00 240056 2.40 5.60
20047 2.00 47.00 200845 2.00 84.50 S 85 240063 2.40 6.30
200475 2.00 47.50 S 48 20085 2.00 85.00 240066 2.40 6.60
20048 2.00 48.00 20086 2.00 86.00 240073 2.40 7.30
20049 2.00 49.00 20087 2.00 87.00 240075 2.40 7.50
200495 2.00 49.50 S 50 20088 2.00 88.00 240076 2.40 7.60
20050 2.00 50.00 20089 2.00 89.00 24008 2.40 8.00
20051 2.00 51.00 200895 2.00 89.50 S 90 240083 2.40 8.30
20052 2.00 52.00 20090 2.00 90.00 240086 2.40 8.60
200525 2.00 52.50 S 53 20091 2.00 91.00 240093 2.40 9.30
20053 2.00 53.00 20092 2.00 92.00 240096 2.40 9.60
20054 2.00 54.00 20093 2.00 93.00 240098 2.40 9.80 P 10A
200545 2.00 54.50 S 55 20094 2.00 94.00 240103 2.40 10.30
20055 2.00 55.00 200945 2.00 94.50 S 95 240105 2.40 10.50
200555 2.00 55.50 S 56 20095 2.00 95.00 240106 2.40 10.60
20056 2.00 56.00 20096 2.00 96.00 240108 2.40 10.80 P 11
20057 2.00 57.00 20097 2.00 97.00 24011 2.40 11.00 P 11.2
20058 2.00 58.00 20098 2.00 98.00 240113 2.40 11.30
20059 2.00 59.00 20099 2.00 99.00 240115 2.40 11.50
200595 2.00 59.50 S 60 200995 2.00 99.50 S 100 240116 2.40 11.60
20060 2.00 60.00 20100 2.00 100.00 240118 2.40 11.80 P 12
20061 2.00 61.00 20102 2.00 102.00 240123 2.40 12.30 P 12.5
20062 2.00 62.00 201045 2.00 104.50 S 105 240126 2.40 12.60
200625 2.00 62.50 S 63 20105 2.00 105.00 240133 2.40 13.30
20063 2.00 63.00 20109 2.00 109.00 240135 2.40 13.50
20064 2.00 64.00 201095 2.00 109.50 S 110 240136 2.40 13.60
200645 2.00 64.50 S 65 20110 2.00 110.00 240138 2.40 13.80 P 14
20065 2.00 65.00 201115 2.00 111.50 S 112 240143 2.40 14.30
20066 2.00 66.00 201145 2.00 114.50 S 115 240145 2.40 14.50
200665 2.00 66.50 S 67 20115 2.00 115.00 240146 2.40 14.60
20067 2.00 67.00 201195 2.00 119.50 S 120 240148 2.40 14.80 P 15
20068 2.00 68.00 20120 2.00 120.00 240153 2.40 15.30
20069 2.00 69.00 201245 2.00 124.50 S 125 240155 2.40 15.50
200695 2.00 69.50 S 70 201256 2.00 125.60 240156 2.40 15.60
20070 2.00 70.00 201295 2.00 129.50 S 130 240158 2.40 15.80 P 16
200705 2.00 70.50 S 71 20130 2.00 130.00 240159 2.40 15.90
20071 2.00 71.00 201315 2.00 131.50 S 132 240163 2.40 16.30
20072 2.00 72.00 201345 2.00 134.50 S 135 240166 2.40 16.60
20073 2.00 73.00 201395 2.00 139.50 S 140 240173 2.40 17.30
Part C/S I.D. Cross Part C/S I.D. Cross Part C/S I.D. Cross
Number (mm) (mm) Ref. # Number (mm) (mm) Ref. # Number (mm) (mm) Ref. #
240175 2.40 17.50 25005 2.50 5.00 250305 2.50 30.50
240176 2.40 17.60 250055 2.50 5.50 25031 2.50 31.00
240178 2.40 17.80 P 18 25006 2.50 6.00 250315 2.50 31.50
240183 2.40 18.30 250065 2.50 6.50 25032 2.50 32.00
240186 2.40 18.60 25007 2.50 7.00 250325 2.50 32.50
240193 2.40 19.30 250075 2.50 7.50 25033 2.50 33.00
O-Rings
O-Rings
25078 2.50 78.00 25129 2.50 129.00 -131 2.62 42.52 -131
25079 2.50 79.00 25130 2.50 130.00 -132 2.62 44.12 -132
25080 2.50 80.00 25131 2.50 131.00 -133 2.62 45.69 -133
25081 2.50 81.00 25132 2.50 132.00 -134 2.62 47.29 -134
25082 2.50 82.00 25133 2.50 133.00 -135 2.62 48.90 -135
25083 2.50 83.00 25134 2.50 134.00 -136 2.62 50.47 -136
25084 2.50 84.00 25135 2.50 135.00 -137 2.62 52.07 -137
25085 2.50 85.00 25136 2.50 136.00 -138 2.62 53.64 -138
25086 2.50 86.00 25137 2.50 137.00 -139 2.62 55.25 -139
25087 2.50 87.00 25138 2.50 138.00 -140 2.62 56.82 -140
25088 2.50 88.00 25139 2.50 139.00 -141 2.62 58.42 -141
25089 2.50 89.00 25140 2.50 140.00 -142 2.62 59.99 -142
25090 2.50 90.00 25141 2.50 141.00 -143 2.62 61.60 -143
25091 2.50 91.00 25142 2.50 142.00 -144 2.62 63.17 -144
25092 2.50 92.00 25143 2.50 143.00 -145 2.62 64.77 -145
25093 2.50 93.00 25144 2.50 144.00 -146 2.62 66.34 -146
25094 2.50 94.00 25145 2.50 145.00 -147 2.62 67.95 -147
25095 2.50 95.00 25146 2.50 146.00 -148 2.62 69.52 -148
25096 2.50 96.00 25147 2.50 147.00 -149 2.62 71.12 -149
25097 2.50 97.00 25148 2.50 148.00 -150 2.62 72.69 -150
25098 2.50 98.00 25149 2.50 149.00 -151 2.62 75.87 -151
25099 2.50 99.00 25150 2.50 150.00 -152 2.62 82.22 -152
25100 2.50 100.00 -102 2.62 1.24 -102 -153 2.62 88.57 -153
25101 2.50 101.00 -103 2.62 2.06 -103 -154 2.62 94.92 -154
25102 2.50 102.00 -104 2.62 2.84 -104 -155 2.62 101.27 -155
25103 2.50 103.00 -105 2.62 3.63 -105 -156 2.62 107.62 -156
25104 2.50 104.00 -106 2.62 4.42 -106 -157 2.62 113.97 -157
25105 2.50 105.00 -107 2.62 5.23 -107 -158 2.62 120.32 -158
25106 2.50 106.00 -108 2.62 6.02 -108 -159 2.62 126.67 -159
25107 2.50 107.00 -109 2.62 7.59 -109 -160 2.62 133.02 -160
25108 2.50 108.00 -110 2.62 9.19 -110 -161 2.62 139.37 -161
25109 2.50 109.00 -111 2.62 10.77 -111 -162 2.62 145.72 -162
25110 2.50 110.00 -112 2.62 12.37 -112 -163 2.62 152.07 -163
25111 2.50 111.00 -113 2.62 13.94 -113 -164 2.62 158.42 -164
25112 2.50 112.00 -114 2.62 15.54 -114 -165 2.62 164.77 -165
25113 2.50 113.00 -115 2.62 17.12 -115 -166 2.62 171.12 -166
25114 2.50 114.00 -116 2.62 18.72 -116 -167 2.62 177.47 -167
25115 2.50 115.00 -117 2.62 20.30 -117 -168 2.62 183.82 -168
25116 2.50 116.00 -118 2.62 21.89 -118 -169 2.62 190.17 -169
25117 2.50 117.00 -119 2.62 23.47 -119 -170 2.62 196.52 -170
25118 2.50 118.00 -120 2.62 25.07 -120 -171 2.62 202.87 -171
25119 2.50 119.00 -121 2.62 26.64 -121 -172 2.62 209.22 -172
25120 2.50 120.00 -122 2.62 28.24 -122 -173 2.62 215.57 -173
25121 2.50 121.00 -123 2.62 29.82 -123 -174 2.62 221.92 -174
25122 2.50 122.00 -124 2.62 31.42 -124 -175 2.62 228.27 -175
Part C/S I.D. Cross Part C/S I.D. Cross Part C/S I.D. Cross
Number (mm) (mm) Ref. # Number (mm) (mm) Ref. # Number (mm) (mm) Ref. #
-176 2.62 234.62 -176 300155 3.00 15.50 300355 3.00 35.50
-177 2.62 240.97 -177 30016 3.00 16.00 30036 3.00 36.00
-178 2.62 247.32 -178 300165 3.00 16.50 300362 3.00 36.20
265014 2.65 14.00 30017 3.00 17.00 300365 3.00 36.50
265015 2.65 15.00 300175 3.00 17.50 30037 3.00 37.00
265016 2.65 16.00 30018 3.00 18.00 300372 3.00 37.20
O-Rings
O-Rings
30071 3.00 71.00 30115 3.00 115.00 30157 3.00 157.00
30072 3.00 72.00 30116 3.00 116.00 30158 3.00 158.00
30073 3.00 73.00 30117 3.00 117.00 30159 3.00 159.00
30074 3.00 74.00 30118 3.00 118.00 301595 3.00 159.50
30075 3.00 75.00 30119 3.00 119.00 30160 3.00 160.00
30076 3.00 76.00 301195 3.00 119.50 30161 3.00 161.00
30077 3.00 77.00 30120 3.00 120.00 30162 3.00 162.00
30078 3.00 78.00 30121 3.00 121.00 30163 3.00 163.00
30079 3.00 79.00 30122 3.00 122.00 30164 3.00 164.00
30080 3.00 80.00 30123 3.00 123.00 301645 3.00 164.50
30081 3.00 81.00 30124 3.00 124.00 30165 3.00 165.00
30082 3.00 82.00 301245 3.00 124.50 30166 3.00 166.00
30083 3.00 83.00 30125 3.00 125.00 30167 3.00 167.00
30084 3.00 84.00 30126 3.00 126.00 30168 3.00 168.00
300845 3.00 84.50 301265 3.00 126.50 30169 3.00 169.00
30085 3.00 85.00 30127 3.00 127.00 301695 3.00 169.50
30086 3.00 86.00 30128 3.00 128.00 30170 3.00 170.00
30087 3.00 87.00 30129 3.00 129.00 30171 3.00 171.00
30088 3.00 88.00 301295 3.00 129.50 30172 3.00 172.00
30089 3.00 89.00 30130 3.00 130.00 30173 3.00 173.00
300895 3.00 89.50 30131 3.00 131.00 30174 3.00 174.00
30090 3.00 90.00 30132 3.00 132.00 301745 3.00 174.50
30091 3.00 91.00 30133 3.00 133.00 30175 3.00 175.00
30092 3.00 92.00 30134 3.00 134.00 30176 3.00 176.00
30093 3.00 93.00 301345 3.00 134.50 30177 3.00 177.00
30094 3.00 94.00 30135 3.00 135.00 30178 3.00 178.00
300945 3.00 94.50 30136 3.00 136.00 30179 3.00 179.00
30095 3.00 95.00 30137 3.00 137.00 301795 3.00 179.50
30096 3.00 96.00 30138 3.00 138.00 30180 3.00 180.00
30097 3.00 97.00 30139 3.00 139.00 30181 3.00 181.00
30098 3.00 98.00 301395 3.00 139.50 30182 3.00 182.00
30099 3.00 99.00 30140 3.00 140.00 30183 3.00 183.00
300995 3.00 99.50 30141 3.00 141.00 301835 3.00 183.50
30100 3.00 100.00 30142 3.00 142.00 30184 3.00 184.00
30101 3.00 101.00 30143 3.00 143.00 301845 3.00 184.50
30102 3.00 102.00 30144 3.00 144.00 30185 3.00 185.00
30103 3.00 103.00 301445 3.00 144.50 30186 3.00 186.00
30104 3.00 104.00 30145 3.00 145.00 30187 3.00 187.00
301045 3.00 104.50 30146 3.00 146.00 30188 3.00 188.00
30105 3.00 105.00 30147 3.00 147.00 30189 3.00 189.00
30106 3.00 106.00 30148 3.00 148.00 301895 3.00 189.50
30107 3.00 107.00 30149 3.00 149.00 30190 3.00 190.00
30108 3.00 108.00 301495 3.00 149.50 30191 3.00 191.00
30109 3.00 109.00 30150 3.00 150.00 30192 3.00 192.00
301095 3.00 109.50 30151 3.00 151.00 30193 3.00 193.00
Part C/S I.D. Cross Part C/S I.D. Cross Part C/S I.D. Cross
Number (mm) (mm) Ref. # Number (mm) (mm) Ref. # Number (mm) (mm) Ref. #
30194 3.00 194.00 350217 3.50 21.70 P 22A 35047 3.50 47.00
301945 3.00 194.50 35022 3.50 22.00 350477 3.50 47.70 P 48
30195 3.00 195.00 350221 3.50 22.10 P 22.4 35048 3.50 48.00
30196 3.00 196.00 35023 3.50 23.00 350487 3.50 48.70 P 49
30197 3.00 197.00 350237 3.50 23.70 P 24 35049 3.50 49.00
30198 3.00 198.00 35024 3.50 24.00 350497 3.50 49.70 P 50
O-Rings
O-Rings
35101 3.50 101.00 35152 3.50 152.00 -203 3.53 7.52 -203
35102 3.50 102.00 35153 3.50 153.00 -204 3.53 9.12 -204
35103 3.50 103.00 35154 3.50 154.00 -205 3.53 10.69 -205
35104 3.50 104.00 35155 3.50 155.00 -206 3.53 12.29 -206
35105 3.50 105.00 35156 3.50 156.00 -207 3.53 13.87 -207
35106 3.50 106.00 35157 3.50 157.00 -208 3.53 15.47 -208
35107 3.50 107.00 35158 3.50 158.00 -209 3.53 17.04 -209
35108 3.50 108.00 35159 3.50 159.00 -210 3.53 18.64 -210
35109 3.50 109.00 35160 3.50 160.00 -211 3.53 20.22 -211
35110 3.50 110.00 35161 3.50 161.00 -212 3.53 21.82 -212
35111 3.50 111.00 35162 3.50 162.00 -213 3.53 23.39 -213
35112 3.50 112.00 35163 3.50 163.00 -214 3.53 24.99 -214
35113 3.50 113.00 35164 3.50 164.00 -215 3.53 26.57 -215
35114 3.50 114.00 35165 3.50 165.00 -216 3.53 28.17 -216
35115 3.50 115.00 35166 3.50 166.00 -217 3.53 29.74 -217
35116 3.50 116.00 35167 3.50 167.00 -218 3.53 31.34 -218
35117 3.50 117.00 35168 3.50 168.00 -219 3.53 32.92 -219
35118 3.50 118.00 35169 3.50 169.00 -220 3.53 34.52 -220
35119 3.50 119.00 35170 3.50 170.00 -221 3.53 36.09 -221
35120 3.50 120.00 35171 3.50 171.00 -222 3.53 37.69 -222
35121 3.50 121.00 35172 3.50 172.00 -223 3.53 40.87 -223
35122 3.50 122.00 35173 3.50 173.00 -224 3.53 44.04 -224
35123 3.50 123.00 35174 3.50 174.00 -225 3.53 47.22 -225
35124 3.50 124.00 35175 3.50 175.00 -226 3.53 50.39 -226
35125 3.50 125.00 35176 3.50 176.00 -227 3.53 53.57 -227
35126 3.50 126.00 35177 3.50 177.00 -228 3.53 56.74 -228
35127 3.50 127.00 35178 3.50 178.00 -229 3.53 59.92 -229
35128 3.50 128.00 35179 3.50 179.00 -230 3.53 63.09 -230
35129 3.50 129.00 35180 3.50 180.00 -231 3.53 66.27 -231
35130 3.50 130.00 35181 3.50 181.00 -232 3.53 69.44 -232
35131 3.50 131.00 35182 3.50 182.00 -233 3.53 72.62 -233
35132 3.50 132.00 35183 3.50 183.00 -234 3.53 75.79 -234
35133 3.50 133.00 35184 3.50 184.00 -235 3.53 78.97 -235
35134 3.50 134.00 35185 3.50 185.00 -236 3.53 82.14 -236
35135 3.50 135.00 35186 3.50 186.00 -237 3.53 85.32 -237
35136 3.50 136.00 35187 3.50 187.00 -238 3.53 88.49 -238
35137 3.50 137.00 35188 3.50 188.00 -239 3.53 91.67 -239
35138 3.50 138.00 35189 3.50 189.00 -240 3.53 94.84 -240
35139 3.50 139.00 35190 3.50 190.00 -241 3.53 98.02 -241
35140 3.50 140.00 35191 3.50 191.00 -242 3.53 101.19 -242
35141 3.50 141.00 35192 3.50 192.00 -243 3.53 104.37 -243
35142 3.50 142.00 35193 3.50 193.00 -244 3.53 107.54 -244
35143 3.50 143.00 35194 3.50 194.00 -245 3.53 110.72 -245
35144 3.50 144.00 35195 3.50 195.00 -246 3.53 113.89 -246
35145 3.50 145.00 35196 3.50 196.00 -247 3.53 117.07 -247
Part C/S I.D. Cross Part C/S I.D. Cross Part C/S I.D. Cross
Number (mm) (mm) Ref. # Number (mm) (mm) Ref. # Number (mm) (mm) Ref. #
-248 3.53 120.24 -248 40004 4.00 4.00 40050 4.00 50.00
-249 3.53 123.42 -249 40005 4.00 5.00 40051 4.00 51.00
-250 3.53 126.59 -250 40006 4.00 6.00 40052 4.00 52.00
-251 3.53 129.77 -251 40007 4.00 7.00 40053 4.00 53.00
-252 3.53 132.94 -252 40008 4.00 8.00 40054 4.00 54.00
-253 3.53 136.12 -253 40009 4.00 9.00 400545 4.00 54.50 V 55
O-Rings
-254 3.53 139.29 -254 40010 4.00 10.00 40055 4.00 55.00
-255 3.53 142.47 -255 40011 4.00 11.00 40056 4.00 56.00
-256 3.53 145.64 -256 40012 4.00 12.00 40057 4.00 57.00
-257 3.53 148.82 -257 40013 4.00 13.00 40058 4.00 58.00
-258 3.53 151.99 -258 40014 4.00 14.00 40059 4.00 59.00
-259 3.53 158.34 -259 400145 4.00 14.50 V 15 40060 4.00 60.00
-260 3.53 164.69 -260 40015 4.00 15.00 40061 4.00 61.00
-261 3.53 171.04 -261 40016 4.00 16.00 40062 4.00 62.00
-262 3.53 177.39 -262 40017 4.00 17.00 40063 4.00 63.00
-263 3.53 183.74 -263 40018 4.00 18.00 40064 4.00 64.00
-264 3.53 190.09 -264 40019 4.00 19.00 40065 4.00 65.00
-265 3.53 196.44 -265 40020 4.00 20.00 40066 4.00 66.00
-266 3.53 202.79 -266 40021 4.00 21.00 40067 4.00 67.00
-267 3.53 209.14 -267 40022 4.00 22.00 40068 4.00 68.00
-268 3.53 215.49 -268 40023 4.00 23.00 40069 4.00 69.00 V 70
-269 3.53 221.84 -269 400235 4.00 23.50 V 24 40070 4.00 70.00
-270 3.53 228.19 -270 40024 4.00 24.00 40071 4.00 71.00
-271 3.53 234.54 -271 40025 4.00 25.00 40072 4.00 72.00
-272 3.53 240.89 -272 40026 4.00 26.00 40073 4.00 73.00
-273 3.53 247.24 -273 40027 4.00 27.00 40074 4.00 74.00
-274 3.53 253.59 -274 40028 4.00 28.00 40075 4.00 75.00
-275 3.53 266.29 -275 40029 4.00 29.00 40076 4.00 76.00
-276 3.53 278.99 -276 40030 4.00 30.00 40077 4.00 77.00
-277 3.53 291.69 -277 40031 4.00 31.00 40078 4.00 78.00
-278 3.53 304.39 -278 40032 4.00 32.00 40079 4.00 79.00
-279 3.53 329.79 -279 40033 4.00 33.00 40080 4.00 80.00
-280 3.53 355.19 -280 400335 4.00 33.50 V 34 40081 4.00 81.00
-281 3.53 380.59 -281 40034 4.00 34.00 40082 4.00 82.00
-282 3.53 405.26 -282 40035 4.00 35.00 40083 4.00 83.00
-283 3.53 430.68 -283 400355 4.00 35.50 V 36 40084 4.00 84.00 V 85
-284 3.53 456.06 -284 40036 4.00 36.00 40085 4.00 85.00
360183 3.60 18.30 40037 4.00 37.00 40086 4.00 86.00
360198 3.60 19.80 40038 4.00 38.00 40087 4.00 87.00
360213 3.60 21.30 40039 4.00 39.00 40088 4.00 88.00
36023 3.60 23.00 400395 4.00 39.50 V 40 40089 4.00 89.00
360246 3.60 24.60 40040 4.00 40.00 40090 4.00 90.00
360262 3.60 26.20 40041 4.00 41.00 40091 4.00 91.00
360278 3.60 27.80 40042 4.00 42.00 40092 4.00 92.00
360293 3.60 29.30 40043 4.00 43.00 40093 4.00 93.00
360308 3.60 30.80 40044 4.00 44.00 40094 4.00 94.00
360325 3.60 32.50 40045 4.00 45.00 40109 4.00 109.00
360341 3.60 34.10 40046 4.00 46.00 40110 4.00 110.00
360356 3.60 35.60 40047 4.00 47.00 40111 4.00 111.00
360373 3.60 37.30 40048 4.00 48.00 40112 4.00 112.00
360434 3.60 43.40 40049 4.00 49.00 40113 4.00 113.00
O-Rings
40120 4.00 120.00 40170 4.00 170.00 45018 4.50 18.00
40121 4.00 121.00 40171 4.00 171.00 45019 4.50 19.00
40122 4.00 122.00 40172 4.00 172.00 45020 4.50 20.00
40123 4.00 123.00 40173 4.00 173.00 V175 45021 4.50 21.00
40124 4.00 124.00 40174 4.00 174.00 45022 4.50 22.00
40125 4.00 125.00 40175 4.00 175.00 45023 4.50 23.00
40126 4.00 126.00 40176 4.00 176.00 45024 4.50 24.00
40127 4.00 127.00 40177 4.00 177.00 45025 4.50 25.00
40128 4.00 128.00 40178 4.00 178.00 45026 4.50 26.00
40129 4.00 129.00 40179 4.00 179.00 45028 4.50 28.00
40130 4.00 130.00 40180 4.00 180.00 45029 4.50 29.00
40131 4.00 131.00 40181 4.00 181.00 45030 4.50 30.00
40132 4.00 132.00 40182 4.00 182.00 45031 4.50 31.00
40133 4.00 133.00 40183 4.00 183.00 45032 4.50 32.00
40134 4.00 134.00 40184 4.00 184.00 45033 4.50 33.00
40135 4.00 135.00 40185 4.00 185.00 45034 4.50 34.00
40136 4.00 136.00 40186 4.00 186.00 45035 4.50 35.00
40137 4.00 137.00 40187 4.00 187.00 45036 4.50 36.00
40138 4.00 138.00 40188 4.00 188.00 45037 4.50 37.00
40139 4.00 139.00 40189 4.00 189.00 45038 4.50 38.00
40140 4.00 140.00 40190 4.00 190.00 45039 4.50 39.00
40141 4.00 141.00 40191 4.00 191.00 45040 4.50 40.00
40142 4.00 142.00 40192 4.00 192.00 45041 4.50 41.00
40143 4.00 143.00 40193 4.00 193.00 45042 4.50 42.00
40144 4.00 144.00 40194 4.00 194.00 45043 4.50 43.00
40145 4.00 145.00 40195 4.00 195.00 45044 4.50 44.00
40146 4.00 146.00 40196 4.00 196.00 45045 4.50 45.00
40147 4.00 147.00 40197 4.00 197.00 45046 4.50 46.00
40148 4.00 148.00 40198 4.00 198.00 45047 4.50 47.00
401485 4.00 148.50 V 150 40199 4.00 199.00 45048 4.50 48.00
40149 4.00 149.00 40200 4.00 200.00 45049 4.50 49.00
40150 4.00 150.00 40201 4.00 201.00 45050 4.50 50.00
40151 4.00 151.00 40202 4.00 202.00 45051 4.50 51.00
40152 4.00 152.00 40203 4.00 203.00 45053 4.50 53.00
40153 4.00 153.00 40204 4.00 204.00 45056 4.50 56.00
40154 4.00 154.00 40205 4.00 205.00 45057 4.50 57.00
40155 4.00 155.00 40206 4.00 206.00 45060 4.50 60.00
40156 4.00 156.00 40207 4.00 207.00 45061 4.50 61.00
40157 4.00 157.00 40208 4.00 208.00 45062 4.50 62.00
40158 4.00 158.00 40209 4.00 209.00 45063 4.50 63.00
40159 4.00 159.00 40210 4.00 210.00 45064 4.50 64.00
40160 4.00 160.00 45006 4.50 6.00 45065 4.50 65.00
40161 4.00 161.00 45008 4.50 8.00 45066 4.50 66.00
40162 4.00 162.00 45009 4.50 9.00 45068 4.50 68.00
40163 4.00 163.00 45010 4.50 10.00 45069 4.50 69.00
Part C/S I.D. Cross Part C/S I.D. Cross Part C/S I.D. Cross
Number (mm) (mm) Ref. # Number (mm) (mm) Ref. # Number (mm) (mm) Ref. #
45070 4.50 70.00 50018 5.00 18.00 50069 5.00 69.00
45071 4.50 71.00 50019 5.00 19.00 50070 5.00 70.00
45073 4.50 73.00 50020 5.00 20.00 50071 5.00 71.00
45074 4.50 74.00 50021 5.00 21.00 50072 5.00 72.00
45075 4.50 75.00 50022 5.00 22.00 50073 5.00 73.00
45076 4.50 76.00 50023 5.00 23.00 50074 5.00 74.00
O-Rings
O-Rings
50126 5.00 126.00 50177 5.00 177.00 50228 5.00 228.00
50127 5.00 127.00 50178 5.00 178.00 50229 5.00 229.00
50128 5.00 128.00 50179 5.00 179.00 50230 5.00 230.00
50129 5.00 129.00 50180 5.00 180.00 50231 5.00 231.00
50130 5.00 130.00 50181 5.00 181.00 50232 5.00 232.00
50131 5.00 131.00 50182 5.00 182.00 50233 5.00 233.00
50132 5.00 132.00 50183 5.00 183.00 50234 5.00 234.00
50133 5.00 133.00 50184 5.00 184.00 50235 5.00 235.00
50134 5.00 134.00 50185 5.00 185.00 50236 5.00 236.00
50135 5.00 135.00 50186 5.00 186.00 50237 5.00 237.00
50136 5.00 136.00 50187 5.00 187.00 50238 5.00 238.00
50137 5.00 137.00 50188 5.00 188.00 50239 5.00 239.00
50138 5.00 138.00 50189 5.00 189.00 50240 5.00 240.00
50139 5.00 139.00 50190 5.00 190.00 50241 5.00 241.00
50140 5.00 140.00 50191 5.00 191.00 50242 5.00 242.00
50141 5.00 141.00 50192 5.00 192.00 50243 5.00 243.00
50142 5.00 142.00 50193 5.00 193.00 50244 5.00 244.00
50143 5.00 143.00 50194 5.00 194.00 50245 5.00 245.00
50144 5.00 144.00 50195 5.00 195.00 50246 5.00 246.00
50145 5.00 145.00 50196 5.00 196.00 50247 5.00 247.00
50146 5.00 146.00 50197 5.00 197.00 50248 5.00 248.00
50147 5.00 147.00 50198 5.00 198.00 50249 5.00 249.00
50148 5.00 148.00 50199 5.00 199.00 50250 5.00 250.00
50149 5.00 149.00 50200 5.00 200.00 53040 5.30 40.00
50150 5.00 150.00 50201 5.00 201.00 530412 5.30 41.20
50151 5.00 151.00 50202 5.00 202.00 530414 5.30 41.40
50152 5.00 152.00 50203 5.00 203.00 530425 5.30 42.50
50153 5.00 153.00 50204 5.00 204.00 530437 5.30 43.70
50154 5.00 154.00 50205 5.00 205.00 53045 5.30 45.00
50155 5.00 155.00 50206 5.00 206.00 530462 5.30 46.20
50156 5.00 156.00 50207 5.00 207.00 530475 5.30 47.50
50157 5.00 157.00 50208 5.00 208.00 530487 5.30 48.70
50158 5.00 158.00 50209 5.00 209.00 53050 5.30 50.00
50159 5.00 159.00 50210 5.00 210.00 530515 5.30 51.50
50160 5.00 160.00 50211 5.00 211.00 53053 5.30 53.00
50161 5.00 161.00 50212 5.00 212.00 530544 5.30 54.40
50162 5.00 162.00 50213 5.00 213.00 530545 5.30 54.50
50163 5.00 163.00 50214 5.00 214.00 53056 5.30 56.00
50164 5.00 164.00 50215 5.00 215.00 53058 5.30 58.00
50165 5.00 165.00 50216 5.00 216.00 53060 5.30 60.00
50166 5.00 166.00 50217 5.00 217.00 530615 5.30 61.50
50167 5.00 167.00 50218 5.00 218.00 53063 5.30 63.00
50168 5.00 168.00 50219 5.00 219.00 53065 5.30 65.00
50169 5.00 169.00 50220 5.00 220.00 53067 5.30 67.00
50170 5.00 170.00 50221 5.00 221.00 53069 5.30 69.00
Part C/S I.D. Cross Part C/S I.D. Cross Part C/S I.D. Cross
Number (mm) (mm) Ref. # Number (mm) (mm) Ref. # Number (mm) (mm) Ref. #
53071 5.30 71.00 -323 5.33 32.69 -323 -374 5.33 234.32 -374
53073 5.30 73.00 -324 5.33 34.29 -324 -375 5.33 240.67 -375
53075 5.30 75.00 -325 5.33 37.47 -325 -376 5.33 2 47.02 -376
530775 5.30 77.50 -326 5.33 40.64 -326 -377 5.33 253.37 -377
53080 5.30 80.00 -327 5.33 43.82 -327 -378 5.33 266.07 -378
530825 5.30 82.50 -328 5.33 46.99 -328 -379 5.33 278.77 -379
O-Rings
53085 5.30 85.00 -329 5.33 50.17 -329 -380 5.33 291.47 -380
530875 5.30 87.50 -330 5.33 53.34 -330 -381 5.33 304.17 -381
53090 5.30 90.00 -331 5.33 56.52 -331 -382 5.33 329.57 -382
530925 5.30 92.50 -332 5.33 59.69 -332 -383 5.33 354.97 -383
53095 5.30 95.00 -333 5.33 62.87 -333 -384 5.33 380.37 -384
530975 5.30 97.50 -334 5.33 66.04 -334 -385 5.33 405.26 -385
53100 5.30 100.00 -335 5.33 69.22 -335 -386 5.33 430.66 -386
53103 5.30 103.00 -336 5.33 72.39 -336 -387 5.33 456.06 -387
53106 5.30 106.00 -337 5.33 75.57 -337 -388 5.33 481.38 -388
53109 5.30 109.00 -338 5.33 78.74 -338 -389 5.33 506.78 -389
53112 5.30 112.00 -339 5.33 81.92 -339 -390 5.33 532.18 -390
53115 5.30 115.00 -340 5.33 85.09 -340 -391 5.33 557.58 -391
53118 5.30 118.00 -341 5.33 88.27 -341 -392 5.33 582.68 -392
53122 5.30 122.00 -342 5.33 91.44 -342 -393 5.33 608.08 -393
53125 5.30 125.00 -343 5.33 94.62 -343 -394 5.33 633.48 -394
53128 5.30 128.00 -344 5.33 97.79 -344 -395 5.33 658.88 -395
53132 5.30 132.00 -345 5.33 100.97 -345 570242 5.70 24.20
53136 5.30 136.00 -346 5.33 104.14 -346 570352 5.70 35.20
53140 5.30 140.00 -347 5.33 107.32 -347 570362 5.70 36.20
53145 5.30 145.00 -348 5.33 110.49 -348 570372 5.70 37.20
53150 5.30 150.00 -349 5.33 113.67 -349 570392 5.70 39.20
53155 5.30 155.00 -350 5.33 116.84 -350 570412 5.70 41.20
53160 5.30 160.00 -351 5.33 120.02 -351 570442 5.70 44.20
53165 5.30 165.00 -352 5.33 123.19 -352 570443 5.70 44.30
53170 5.30 170.00 -353 5.33 126.37 -353 570452 5.70 45.20
53175 5.30 175.00 -354 5.33 129.54 -354 570453 5.70 45.30
53180 5.30 180.00 -355 5.33 132.72 -355 570472 5.70 47.20
53185 5.30 185.00 -356 5.33 135.89 -356 570476 5.70 47.60 P 48A
53190 5.30 190.00 -357 5.33 139.07 -357 570492 5.70 49.20
53195 5.30 195.00 -358 5.33 142.24 -358 570493 5.70 49.30
53200 5.30 200.00 -359 5.33 145.42 -359 570496 5.70 49.60 P 50A
-309 5.33 10.46 -309 -360 5.33 148.59 -360 570512 5.70 51.20
-310 5.33 12.07 -310 -361 5.33 151.77 -361 570516 5.70 51.60 P 52
-311 5.33 13.64 -311 -362 5.33 158.12 -362 570522 5.70 52.20
-312 5.33 15.24 -312 -363 5.33 164.47 -363 570523 5.70 52.30
-313 5.33 16.81 -313 -364 5.33 170.82 -364 570525 5.70 52.50
-314 5.33 18.42 -314 -365 5.33 177.17 -365 570526 5.70 52.60 P 53
-315 5.33 19.99 -315 -366 5.33 183.52 -366 570530 5.70 53.00
-316 5.33 21.59 -316 -367 5.33 189.87 -367 570542 5.70 54.20
-317 5.33 23.16 -317 -368 5.33 196.22 -368 570543 5.70 54.30
-318 5.33 24.77 -318 -369 5.33 202.57 -369 570546 5.70 54.60 P 55
-319 5.33 26.34 -319 -370 5.33 208.92 -370 570552 5.70 55.20
-320 5.33 27.94 -320 -371 5.33 215.27 -371 570553 5.70 55.30
-321 5.33 29.51 -321 -372 5.33 221.62 -372 570556 5.70 55.60 P 56
-322 5.33 31.12 -322 -373 5.33 227.97 -373 570572 5.70 57.20
O-Rings
570616 5.70 61.60 P 62 571143 5.70 114.30 573993 5.70 399.30
57062 5.70 62.00 571146 5.70 114.60 P 115 60012 6.00 12.00
570622 5.70 62.20 571192 5.70 119.20 60018 6.00 18.00
570623 5.70 62.30 571196 5.70 119.60 P 120 60020 6.00 20.00
570626 5.70 62.60 P 63 571246 5.70 124.60 P 125 60023 6.00 23.00
57064 5.70 64.00 571292 5.70 129.20 60024 6.00 24.00
570642 5.70 64.20 571296 5.70 129.60 P 130 60025 6.00 25.00
570643 5.70 64.30 571316 5.70 131.60 P 132 60026 6.00 26.00
570646 5.70 64.60 P 65 571342 5.70 134.20 60032 6.00 32.00
570666 5.70 66.60 P 67 571346 5.70 134.60 P 135 60034 6.00 34.00
570672 5.70 67.20 571392 5.70 139.20 60035 6.00 35.00
57069 5.70 69.00 571393 5.70 139.30 60036 6.00 36.00
570692 5.70 69.20 571396 5.70 139.60 P 140 60037 6.00 37.00
570693 5.70 69.30 571442 5.70 144.20 60038 6.00 38.00
570696 5.70 69.60 P 70 571446 5.70 144.60 P 145 60040 6.00 40.00
570702 5.70 70.20 571492 5.70 149.20 60041 6.00 41.00
570706 5.70 70.60 P 71 571493 5.70 149.30 G 150 60042 6.00 42.00
570712 5.70 71.20 571496 5.70 149.60 P 150 60044 6.00 44.00
570722 5.70 72.20 571543 5.70 154.30 G 155 60045 6.00 45.00
570723 5.70 72.30 571593 5.70 159.30 G 160 60046 6.00 46.00
57074 5.70 74.00 571642 5.70 164.20 60048 6.00 48.00
570742 5.70 74.20 571643 5.70 164.30 G 165 60050 6.00 50.00
570743 5.70 74.30 571693 5.70 169.30 G 170 60052 6.00 52.00
570746 5.70 74.60 P 75 571742 5.70 174.20 60056 6.00 56.00
570772 5.70 77.20 571743 5.70 174.30 G 175 60058 6.00 58.00
57079 5.70 79.00 571793 5.70 179.30 G 180 60059 6.00 59.00
570792 5.70 79.20 571843 5.70 184.30 G 185 60060 6.00 60.00
570793 5.70 79.30 571892 5.70 189.20 60062 6.00 62.00
570796 5.70 79.60 P 80 571893 5.70 189.30 G 190 60064 6.00 64.00
570812 5.70 81.20 571942 5.70 194.20 60065 6.00 65.00
570822 5.70 82.20 571943 5.70 194.30 G 195 60067 6.00 67.00
570842 5.70 84.20 571992 5.70 199.20 60069 6.00 69.00
570846 5.70 84.60 P 85 571993 5.70 199.30 G 200 60070 6.00 70.00
570872 5.70 87.20 572042 5.70 204.20 60072 6.00 72.00
570891 5.70 89.10 572092 5.70 209.20 60073 6.00 73.00
570892 5.70 89.20 572093 5.70 209.30 G 210 60074 6.00 74.00
570893 5.70 89.30 572193 5.70 219.30 G 220 60075 6.00 75.00
570896 5.70 89.60 P 90 572293 5.70 229.30 G 230 60076 6.00 76.00
570922 5.70 92.20 572343 5.70 234.30 60079 6.00 79.00
570942 5.70 94.20 572393 5.70 239.30 G 240 60080 6.00 80.00
570946 5.70 94.60 P 95 572493 5.70 249.30 G 250 60085 6.00 85.00
570966 5.70 96.60 572593 5.70 259.30 G 260 60086 6.00 86.00
570992 5.70 99.20 572693 5.70 269.30 G 270 60088 6.00 88.00
570996 5.70 99.60 P 100 572793 5.70 279.30 G 280 60090 6.00 90.00
571016 5.70 101.60 P 102 572893 5.70 289.30 G 290 60092 6.00 92.00
Part C/S I.D. Cross Part C/S I.D. Cross Part C/S I.D. Cross
Number (mm) (mm) Ref. # Number (mm) (mm) Ref. # Number (mm) (mm) Ref. #
60095 6.00 95.00 60300 6.00 300.00 -454 6.99 316.87 -454
60098 6.00 98.00 60320 6.00 320.00 -455 6.99 329.57 -455
60100 6.00 100.00 603215 6.00 321.50 V 325 -456 6.99 342.27 -456
60103 6.00 103.00 60330 6.00 330.00 -457 6.99 354.97 -457
60105 6.00 105.00 60355 6.00 355.00 -458 6.99 367.67 -458
60110 6.00 110.00 60365 6.00 365.00 -459 6.99 380.37 -459
O-Rings
60112 6.00 112.00 60370 6.00 370.00 -460 6.99 393.07 -460
60114 6.00 114.00 60376 6.00 376.00 -461 6.99 405.26 -461
60115 6.00 115.00 603765 6.00 376.50 V 380 -462 6.99 417.96 -462
60118 6.00 118.00 60380 6.00 380.00 -463 6.99 430.66 -463
60120 6.00 120.00 60385 6.00 385.00 -464 6.99 443.36 -464
60122 6.00 122.00 60392 6.00 392.00 -465 6.99 456.06 -465
60124 6.00 124.00 60394 6.00 394.00 -466 6.99 468.76 -466
60125 6.00 125.00 604255 6.00 425.50 V 430 -467 6.99 481.46 -467
60128 6.00 128.00 60429 6.00 429.00 -468 6.99 494.16 -468
60130 6.00 130.00 60445 6.00 445.00 -469 6.99 506.86 -469
60134 6.00 134.00 60478 6.00 478.00 -470 6.99 532.26 -470
60135 6.00 135.00 60480 6.00 480.00 -471 6.99 557.66 -471
60138 6.00 138.00 60500 6.00 500.00 -472 6.99 582.68 -472
60140 6.00 140.00 60504 6.00 504.00 -473 6.99 608.08 -473
60142 6.00 142.00 60525 6.00 525.00 -474 6.99 633.48 -474
60145 6.00 145.00 60575 6.00 575.00 -475 6.99 658.88 -475
60146 6.00 146.00 -425 6.99 113.67 -425 70011 7.00 11.00
60148 6.00 148.00 -426 6.99 116.84 -426 70015 7.00 15.00
60150 6.00 150.00 -427 6.99 120.02 -427 70023 7.00 23.00
60160 6.00 160.00 -428 6.99 123.19 -428 70034 7.00 34.00
60165 6.00 165.00 -429 6.99 126.37 -429 70035 7.00 35.00
60166 6.00 166.00 -430 6.99 129.54 -430 70040 7.00 40.00
60169 6.00 169.00 -431 6.99 132.72 -431 70058 7.00 58.00
60170 6.00 170.00 -432 6.99 135.89 -432 70059 7.00 59.00
60172 6.00 172.00 -433 6.99 139.07 -433 70060 7.00 60.00
60175 6.00 175.00 -434 6.99 142.24 -434 70068 7.00 68.00
60180 6.00 180.00 -435 6.99 145.42 -435 70079 7.00 79.00
60185 6.00 185.00 -436 6.99 148.59 -436 70083 7.00 83.00
60190 6.00 190.00 -437 6.99 151.77 -437 70094 7.00 94.00
60195 6.00 195.00 -438 6.99 158.12 -438 70096 7.00 96.00
60200 6.00 200.00 -439 6.99 164.47 -439 70106 7.00 106.00
60208 6.00 208.00 -440 6.99 170.82 -440 70107 7.00 107.00
60210 6.00 210.00 -441 6.99 177.17 -441 70110 7.00 110.00
60215 6.00 215.00 -442 6.99 183.52 -442 70111 7.00 111.00
60220 6.00 220.00 -443 6.99 189.87 -443 701147 7.00 114.70
602225 6.00 222.50 V 225 -444 6.99 196.22 -444 70115 7.00 115.00
60230 6.00 230.00 -445 6.99 202.57 -445 70120 7.00 120.00
60242 6.00 242.00 -446 6.99 215.27 -446 70128 7.00 128.00
60250 6.00 250.00 -447 6.99 227.97 -447 70150 7.00 150.00
60262 6.00 262.00 -448 6.99 240.67 -448 701595 7.00 159.50
60266 6.00 266.00 -449 6.99 253.37 -449 70160 7.00 160.00
60270 6.00 270.00 -450 6.99 266.07 -450 701667 7.00 166.70
60272 6.00 272.00 V 275 -451 6.99 278.77 -451 701746 7.00 174.60
60290 6.00 290.00 -452 6.99 291.47 -452 70181 7.00 181.00
60295 6.00 295.00 -453 6.99 304.17 -453 701873 7.00 187.30
O-Rings
70230 7.00 230.00 80185 8.00 185.00 842345 8.40 234.50 P 235
70234 7.00 234.00 80188 8.00 188.00 842391 8.40 239.10
702343 7.00 234.30 80200 8.00 200.00 842395 8.40 239.50 P 240
70235 7.00 235.00 80205 8.00 205.00 842445 8.40 244.50 P 245
70236 7.00 236.00 80210 8.00 210.00 842495 8.40 249.50 P 250
70240 7.00 240.00 80230 8.00 230.00 842545 8.40 254.50 P 255
70247 7.00 247.00 80235 8.00 235.00 842595 8.40 259.50 P 260
70250 7.00 250.00 80245 8.00 245.00 842645 8.40 264.50 P 265
702597 7.00 259.70 80278 8.00 278.00 842695 8.40 269.50 P 270
70266 7.00 266.00 80290 8.00 290.00 842745 8.40 274.50 P 275
702851 7.00 285.10 80300 8.00 300.00 84319 8.40 319.00
702978 7.00 297.80 80308 8.00 308.00 843345 8.40 334.50
70300 7.00 300.00 80320 8.00 320.00 844191 8.40 419.10
70310 7.00 310.00 80326 8.00 326.00 10X475 10.00 475.00 V 480
70325 7.00 325.00 80330 8.00 330.00 10X5245 10.00 524.50 V 530
70329 7.00 329.00 80425 8.00 425.00 10X579 10.00 579.00 V 585
70338 7.00 338.00 80440 8.00 440.00 10X6335 10.00 633.50 V 640
70348 7.00 348.00 80470 8.00 470.00 10X683 10.00 683.00 V 690
70388 7.00 388.00 80475 8.00 475.00 10X7325 10.00 732.50 V 740
70400 7.00 400.00 80480 8.00 480.00 10X782 10.00 782.00 V 790
70416 7.00 416.00 80490 8.00 490.00 10X8365 10.00 836.50 V 845
70430 7.00 430.00 80500 8.00 500.00 10X1044 10.00 1044.00 V 1055
70431 7.00 431.00 80565 8.00 565.00
70437 7.00 437.00 841441 8.40 144.10
70448 7.00 448.00 841495 8.40 149.50 P 150A
70515 7.00 515.00 841541 8.40 154.10
70540 7.00 540.00 841545 8.40 154.50 P 155
70558 7.00 558.00 841591 8.40 159.10
70625 7.00 625.00 841595 8.40 159.50 P 160
80016 8.00 16.00 841641 8.40 164.10
80025 8.00 25.00 841645 8.40 164.50 P 165
80033 8.00 33.00 841695 8.40 169.50 P 170
80050 8.00 50.00 841741 8.40 174.10
80054 8.00 54.00 841745 8.40 174.50 P 175
80055 8.00 55.00 841795 8.40 179.50 P 180
80060 8.00 60.00 841845 8.40 184.50 P 185
80065 8.00 65.00 841895 8.40 189.50 P 190
80067 8.00 67.00 841941 8.40 194.10
80070 8.00 70.00 841945 8.40 194.50 P 195
80075 8.00 75.00 841991 8.40 199.10
80090 8.00 90.00 841995 8.40 199.50 P 200
80092 8.00 92.00 842041 8.40 204.10
80110 8.00 110.00 842045 8.40 204.50 P 205
80112 8.00 112.00 842085 8.40 208.50 P 209
80125 8.00 125.00 842091 8.40 209.10
Product Description:
O-ring cord is excellent for large diameter static applications. Hi-Tech Seals’ O-ring cord is sold by the foot. Custom
O-ring sizes can be manufactured through our in-house splice and vulcanizing service.
Part Numbers:
CO ___ - ___ ___ ___ ___ ___ ___ ___
O-Ring Kits
Viton®/Fluorocarbon -26°C to 204°C
Product Description:
Hi-Tech Seals offers O-ring kits in popular materials such as Nitrile, and Viton®/fluorocarbon. O-ring kits are an excellent
tool for shops, maintenance workers, or crews out in the field.
Part Numbers:
KIT - ___ ___ ___ ___ ___ ___ ___
Description
Contents Description (C/S x I.D.) Quantity Contents Description (C/S x I.D.) Quantity
MN7 15003 1.50 x 3.00 20 MN7 20018 2.00 x 18.00 15
MN7 15005 1.50 x 5.00 20 MN7 20020 2.00 x 20.00 15
MN7 15007 1.50 x 7.00 20 MN7 30022 3.00 x 22.00 15
MN7 15009 1.50 x 9.00 20 MN7 30025 3.00 x 25.00 15
MN7 15011 1.50 x 11.00 20 MN7 300282 3.00 x 28.20 15
MN7 20006 2.00 x 6.00 20 MN7 300302 3.00 x 30.20 15
MN7 20008 2.00 x 8.00 20 MN7 300322 3.00 x 32.20 10
MN7 20010 2.00 x 10.00 20 MN7 300362 3.00 x 36.20 10.
MN7 20012 2.00 x 12.00 20 MN7 40025 4.00 x 25.00 15
MN7 20014 2.00 x 14.00 20 MN7 40030 4.00 x 30.00 15
MN7 240063 2.40 x 6.30 15 MN7 40032 4.00 x 32.00 15
MN7 240083 2.40 x 8.30 15 MN7 40034 4.00 x 34.00 15
MN7 240113 2.40 x 11.30 15 MN7 40036 4.00 x 36.00 15
MN7 240133 2.40 x 13.30 15 MN7 40038 4.00 x 38.00 10
MN7 240173 2.40 x 17.30 15 MN7 40040 4.00 x 40.00 10
MN7 25005 2.50 x 5.00 15 MN7 40044 4.00 x 44.00 10
MN7 25007 2.50 x 7.00 15 MN7 40048 4.00 x 48.00 10
MN7 25010 2.50 x 10.00 15 MN7 40050 4.00 x 50.00 10
MN7 25012 2.50 x 12.00 15 MN7 50025 5.00 x 25.00 10
MN7 25015 2.50 x 15.00 15 MN7 50030 5.00 x 30.00 10
MN7 30010 3.00 x 10.00 10 MN7 50035 5.00 x 35.00 10
MN7 30012 3.00 x 12.00 10 MN7 50040 5.00 x 40.00 10
MN7 30014 3.00 x 14.00 10 MN7 50045 5.00 x 45.00 5
MN7 30016 3.00 x 16.00 10 MN7 50050 5.00 x 50.00 5
MN7 30018 3.00 x 18.00 10
MN7 300202 3.00 x 20.20 5 Also available:
MN7 300222 3.00 x 22.20 5 KIT METRICD90 - Nitrile 90 Durometer
MN7 300242 3.00 x 24.20 5
MN7 300262 3.00 x 26.20 5
MN7 300302 3.00 x 30.20 5
Also available:
KIT METRICCN90 - Nitrile 90 Durometer
KIT METRICCVITON- Viton® 75 Durometer
O-Ring Kits
KIT METRICN70 - Nitrile 70 Durometer KIT METRICN90 - Nitrile 90 Durometer
Contents Description (C/S x I.D.) Quantity Contents Description (C/S x I.D.) Quantity
MN7 20003 2.00 x 3.00 16 MN9 20004 2.00 x 4.00 16
MN7 20004 2.00 x 4.00 16 MN9 20005 2.00 x 5.00 16
MN7 20005 2.00 x 5.00 16 MN9 20006 2.00 x 6.00 16
MN7 20006 2.00 x 6.00 16 MN9 20007 2.00 x 7.00 16
MN7 20007 2.00 x 7.00 16 MN9 20008 2.00 x 8.00 16
MN7 20008 2.00 x 8.00 16 MN9 20010 2.00 x 10.00 16
MN7 20010 2.00 x 10.00 16 MN9 25010 2.50 x 10.00 13
MN7 25010 2.50 x 10.00 13 MN9 25011 2.50 x 11.00 13
MN7 25011 2.50 x 11.00 13 MN9 25012 2.50 x 12.00 13
MN7 25012 2.50 x 12.00 13 MN9 25014 2.50 x 14.00 13
MN7 25014 2.50 x 14.00 13 MN9 25016 2.50 x 16.00 13
MN7 25016 2.50 x 16.00 13 MN9 25017 2.50 x 17.00 13
MN7 25017 2.50 x 17.00 13 MN9 25019 2.50 x 19.00 13
MN7 25019 2.50 x 19.00 13 MN9 30019 3.00 x 19.00 12
MN7 30019 3.00 x 19.00 12 MN9 30020 3.00 x 20.00 12
MN7 30020 3.00 x 20.00 12 MN9 30022 3.00 x 22.00 12
MN7 30022 3.00 x 22.00 12 MN9 30023 3.00 x 23.00 12
MN7 30024 3.00 x 24.00 12 MN9 30025 3.00 x 25.00 12
MN7 30025 3.00 x 25.00 12 MN9 30027 3.00 x 27.00 12
MN7 30027 3.00 x 27.00 12 MN9 30028 3.00 x 28.00 12
MN7 30028 3.00 x 28.00 12 MN9 30030 3.00 x 30.00 12
MN7 30030 3.00 x 30.00 12 MN9 30034 3.00 x 34.00 12
MN7 30032 3.00 x 32.00 12 MN9 30035 3.00 x 35.00 12
MN7 30033 3.00 x 33.00 12 MN9 30036 3.00 x 36.00 12
MN7 30035 3.00 x 35.00 12 MN9 30038 3.00 x 38.00 12
MN7 30036 3.00 x 36.00 12 MN9 40038 4.00 x 38.00 9
MN7 30038 3.00 x 38.00 12 MN9 40040 4.00 x 40.00 9
MN7 40038 4.00 x 38.00 9 MN9 40044 4.00 x 44.00 9
MN7 40041 4.00 x 41.00 9
MN7 40044 4.00 x 44.00 9
Back-Up Rings
Viton® / Fluorocarbon -26°C to 204°C
Teflon® / PTFE -200°C to 250°C
PEEK -70°C to 260°C
Hytrel® -54°C to 149°C
Urethane -54°C to 105°C
Solid Flat Scarf Cut Spiral Cut Solid Contoured Butt Cut
Product Description:
Back-up rings are plastic or rubber rings used to prevent the O-ring from entering the clearance gap. When high pressures
are exerted on the O-ring, its soft rubber material can be forced into the clearance gap causing the O-ring to extrude (see
our O-ring brochure for examples of O-ring failure). The hard Back-up ring material will keep the O-ring material from
flowing into the gap which will prevent premature failure.
Part Numbers:
B ___ M - ___ ___ ___ ___ ___ ___ ___ ___ ___
Example: BNM - 1251453 - Nylon Back-up Ring - 125.00 mm I.D. x 145.000 mm O.D. x 3.00 mm Height
Energizer Materials:
Nitrile -40°C to 120°C
Product Description:
The capped T-seal is a double-acting, high pressure, high performance piston seal, which is designed to accommodate
large extrusion gaps. The major benefits of this design are its excellent extrusion resistance, low friction and low wear, all
presented in a compact and stable design. The standard capped T-seal is a four piece seal consisting of a Nitrile energizer,
a filled PTFE cap and two Nylon anti-extrusion rings.
If you’re having an installation issue with your capped T-seal, contact Hi-Tech Seals and ask about the locking capped T-seal design.
Part Numbers:
M4P - ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___
Example: M4P 10085125 - Capped T-Seal - 85.00 mm I.D., 100.00 mm O.D., 12.50 mm Width
Capped T-Seals
A B
Wipers
PEEK -70°C to 260°C
Hytrel® -54°C to 149°C
Metal Clad (WCM) Metal Clad (WCM) Metal Clad (WCM) Metal Clad H-Style
Pin Eye (PE) (WCM)
Product Description:
Wipers are primarily designed to stop contaminants from entering a cylinder on the rod, however, they can also act
as a secondary rod seal. If contaminants were allowed to enter the cylinder it could lead to damage of your rod and/
or the damage of other sealing components. A properly selected wiper could help reduce the need for unscheduled
maintenance and even increase the time between maintenance cycles.
It is important to determine the correct style and material for your application. Things that should be considered when
selecting the material of your wiper include: required abrasion resistance, elasticity, resilience and fluid compatibility.
D-Style
L
H
Wipers
Interchangable Design WDM - ___ ___ ___ ___ ___ ___ ___ ___ ___ ___
I.D. O.D. L H
Wipers
Part Number I.D. O.D. L H Part Number I.D. O.D. L H
WDM 8092712 80.00 92.00 7.00 12.00 WDM 125137712 125.00 137.00 7.00 12.00
WDM 829057 82.00 90.00 5.00 7.00 WDM 1251401016 125.00 140.00 10.00 16.00
WDM 859357 85.00 93.00 5.00 7.00 WDM 12814057 128.00 140.00 5.00 7.00
WDM 859557 85.00 95.00 5.00 7.00 WDM 130142712 130.00 142.00 7.00 12.00
WDM 8597712 85.00 97.00 7.00 12.00 WDM 13514357 135.00 143.00 5.00 7.00
WDM 889657 88.00 96.00 5.00 7.00 WDM 135147712 135.00 147.00 7.00 12.00
WDM 909857 90.00 98.00 5.00 7.00 WDM 14014857 140.00 148.00 5.00 7.00
WDM 9010057 90.00 100.00 5.00 7.00 WDM 1401551016 140.00 155.00 10.00 16.00
WDM 90102712 90.00 102.00 7.00 12.00 WDM 15015857 150.00 158.00 5.00 7.00
WDM 95107712 95.00 107.00 7.00 12.00 WDM 150162712 150.00 162.00 7.00 12.00
WDM 10010857 100.00 108.00 5.00 7.00 WDM 150165712 150.00 165.00 7.00 12.00
WDM 100112712 100.00 112.00 7.00 12.00 WDM 1501651016 150.00 165.00 10.00 16.00
WDM 10511357 105.00 113.00 5.00 7.00 WDM 155167712 155.00 167.00 7.00 12.00
WDM 105117712 105.00 117.00 7.00 12.00 WDM 1601751016 160.00 175.00 10.00 16.00
WDM 11011857 110.00 118.00 5.00 7.00 WDM 1701851016 170.00 185.00 10.00 16.00
WDM 110122712 110.00 122.00 7.00 12.00 WDM 1751901016 175.00 190.00 10.00 16.00
WDM 115127712 115.00 127.00 7.00 12.00 WDM 1801951016 180.00 195.00 10.00 16.00
WDM 12012857 120.00 128.00 5.00 7.00 WDM 1802001018 180.00 200.00 10.00 18.00
WDM 12013057 120.00 130.00 5.00 7.00 WDM 1902101016 190.00 210.00 10.00 16.00
WDM 120132712 120.00 132.00 7.00 12.00 WDM 2002201018 200.00 220.00 10.00 18.00
Stepped D-Style L2
L1
H
Wipers
O.D. I.D.
WDM - ___ ___ ___ ___ ___ ___ ___ ___ ___ ___
I.D. O.D. L1 L2 H
Standard Material: Urethane
Wipers
I.D. O.D.
WHM - ___ ___ ___ ___ ___ ___ ___ ___ ___ ___
I.D. O.D. L H
Standard Material: Urethane
Stepped H-Style
L2 L2
L1 L1
H
Wipers
WHM - ___ ___ ___ ___ ___ ___ ___ ___ ___ ___
I.D. O.D. L1 L2 H
Wipers
O.D. I.D. Primary Design
Interchangable Design
WCM - ___ ___ ___ ___ ___ ___ ___ ___ ___ ___
I.D. O.D. L H
Metal Clad
Wipers
Wipers
O.D. I.D.
Product Description:
Homogenous U-cups (block vees) are a non-loaded, single material U-cup. The Homo U-cup (HU) is popular in low
pressure applications where a low friction seal would be beneficial. The seal is most commonly used in pneumatic
applications as a rod or piston seal. The design is suited for situations where space is limited. The HU seal is typically made
from an 80 durometer Nitrile but also comes in Fluorocarbon, Neoprene and other homogenous materials.
As pressure is applied to the homogenous U-cup the seal experiences an increase in sealing force until it reaches the
maximum pressure the seal can handle. Homogeneous U-cup seals can handle up to 500 PSI; however, if you have
applications that require higher pressure capabilities please consult a Hi-Tech Seals’ sales representative.
Part Numbers:
M ___ ___ - ___ ___ ___ ___ ___ ___ ___ ___
Example: MHU - 22305- Homogenous U-Cup - 22.00 mm I.D. x 30.00 mm O.D. x 5.00 mm Height
Homogenous U-Cups
Height
O.D. I.D.
O.D. I.D.
Fluorocarbon
Urethane U-Cups
Loader Materials:
Nitrile -40°C to 120°C
Product Description:
The urethane U-cup design provides an excellent heavy duty seal for either piston or rod applications. Urethane U-cups
work well in both static and dynamic applications. Symmetrical, rod and piston styles are available in a range of sizes. The
non-symmetric styles provide the added benefits of: reduced seal movement, added stability in static applications and
protection of the dynamic lip during installation. The rod style provides improved sealability on the I.D., while the piston
style provides improved sealability on the O.D.
Part Numbers:
___ ___ ___ - ___ ___ ___ ___ ___ ___ ___ ___ ___ ___
Symmetrical Style
W W
Urethane U-Cups
Suffix:
Blank - Unloaded U-Cup
P - Loaded U-Cup
Urethane U-Cups
MSY 223057P 22.00 30.00 5.70 MSY 304610 30.00 46.00 10.00
MSY 22306 22.00 30.00 6.00 MSY 305010 30.00 50.00 10.00
MSY 22307 22.00 30.00 7.00 MSY 305012 30.00 50.00 12.00
MSY 22327 22.00 32.00 7.00 MSY 324057P 32.00 40.00 5.70
MSY 22328 22.00 32.00 8.00 MSY 32406 32.00 40.00 6.00
MSY 223210 22.00 32.00 10.00 MSY 324075P 32.00 40.00 7.50
MSY 22346 22.00 34.00 6.00 MSY 32408 32.00 40.00 8.00
MSY 224010 22.00 40.00 10.00 MSY 324210P 32.00 42.00 10.00
MSY 224012 22.00 40.00 12.00 MSY 324510 32.00 45.00 10.00
MSY 224305 22.00 43.00 5.00 MSY 324810P 32.00 48.00 10.00
MSY 223510 22.40 30.00 10.00 MSY 325010 32.00 50.00 10.00
MSY 243257 24.00 32.00 5.70 MSY 334310 33.00 43.00 10.00
MSY 24408 24.00 40.00 8.00 MSY 354357 35.00 43.00 5.70
MSY 25335 25.00 33.00 5.00 MSY 354363 35.00 43.00 6.30
MSY 253357P 25.00 33.00 5.70 MSY 35438 35.00 43.00 8.00
MSY 25338 25.00 33.00 8.00 MSY 35456 35.00 45.00 6.00
MSY 25338P 25.00 33.00 8.00 MSY 354510 35.00 45.00 10.00
MSY 253565 25.00 35.00 6.50 MSY 354510P 35.00 45.00 10.00
MSY 25358 25.00 35.00 8.00 MSY 354810 35.00 48.00 10.00
MSY 25358P 25.00 35.00 8.00 MSY 355010 35.00 50.00 10.00
MSY 253510P 25.00 35.00 10.00 MSY 355010P 35.00 50.00 10.00
MSY 253810 25.00 38.00 10.00 MSY 36448P 36.00 44.00 8.00
MSY 254010 25.00 40.00 10.00 MSY 36467 36.00 46.00 7.00
MSY 254010P 25.00 40.00 10.00 MSY 365110 36.00 51.00 10.00
MSY 264712 26.00 47.00 12.00 MSY 38455 38.00 45.00 5.00
MSY 283555P 28.00 35.50 5.00 MSY 38509 38.00 50.00 9.00
MSY 28364 28.00 36.00 4.00 MSY 385010 38.00 50.00 10.00
MSY 283655 28.00 36.00 5.50 MSY 385510 38.00 55.00 10.00
MSY 28368P 28.00 36.00 8.00 MSY 40486P 40.00 48.00 6.00
MSY 283873P 28.00 38.00 7.30 MSY 404811 40.00 48.00 11.00
MSY 28388 28.00 38.00 8.00 MSY 40505 40.00 50.00 5.00
MSY 28409 28.00 40.00 9.00 MSY 40506 40.00 50.00 6.00
MSY 284010 28.00 40.00 10.00 MSY 40506P 40.00 50.00 6.00
MSY 303857 30.00 38.00 5.70 MSY 40507 40.00 50.00 7.00
MSY 303863P 30.00 38.00 6.30 MSY 405075 40.00 50.00 7.50
MSY 30388 30.00 38.00 8.00 MSY 40508 40.00 50.00 8.00
MSY 30405 30.00 40.00 5.00 MSY 40508P 40.00 50.00 8.00
MSY 30406P 30.00 40.00 6.00 MSY 405010 40.00 50.00 10.00
MSY 304010 30.00 40.00 10.00 MSY 405010P 40.00 50.00 10.00
MSY 304010P 30.00 40.00 10.00 MSY 405510 40.00 55.00 10.00
MSY 30429 30.00 42.00 9.00 MSY 405510P 40.00 55.00 10.00
MSY 304210 30.00 42.00 10.00 MSY 40608 40.00 60.00 8.00
MSY 304210P 30.00 42.00 10.00 MSY 406010P 40.00 60.00 10.00
MSY 30458P 30.00 45.00 8.00 MSY 406012 40.00 60.00 12.00
MSY 304510 30.00 45.00 10.00 MSY 406012P 40.00 60.00 12.00
MSY 304510P 30.00 45.00 10.00 MSY 406018 40.00 60.00 18.00
Symmetrical Style
Material Dimensions Material Dimensions
Part Number I.D. O.D. Width Part Number I.D. O.D. Width
Urethane U-Cups
MSY 425065P 42.00 50.00 6.50 MSY 60706P 60.00 70.00 6.00
MSY 42557 42.00 55.00 7.00 MSY 60708P 60.00 70.00 8.00
MSY 42557P 42.00 55.00 7.00 MSY 607010 60.00 70.00 10.00
MSY 426212 42.00 62.00 12.00 MSY 607012 60.00 70.00 12.00
MSY 45538 45.00 53.00 8.00 MSY 607012P 60.00 70.00 12.00
MSY 45556P 45.00 55.00 6.00 MSY 60725 60.00 72.00 5.00
MSY 455565 45.00 55.00 6.50 MSY 60729 60.00 72.00 9.00
MSY 455573 45.00 55.00 7.30 MSY 607511P 60.00 75.00 11.00
MSY 455510 45.00 55.00 10.00 MSY 607512 60.00 75.00 12.00
MSY 455510P 45.00 55.00 10.00 MSY 608012 60.00 80.00 12.00
MSY 45585 45.00 58.00 5.00 MSY 608012P 60.00 80.00 12.00
MSY 456010 45.00 60.00 10.00 MSY 6080145P 60.00 80.00 14.50
MSY 456010P 45.00 60.00 10.00 MSY 608018 60.00 80.00 18.00
MSY 456510 45.00 65.00 10.00 MSY 61716 61.00 71.00 6.00
MSY 456512 45.00 65.00 12.00 MSY 637312P 63.00 73.00 12.00
MSY 456512P 45.00 65.00 12.00 MSY 637510 63.00 75.00 10.00
MSY 485810 48.00 58.00 10.00 MSY 637810 63.00 78.00 10.00
MSY 48609 48.00 60.00 9.00 MSY 6378106 63.00 78.00 10.60
MSY 486310 48.00 63.00 10.00 MSY 638315 63.00 83.00 15.00
MSY 486312 48.00 63.00 12.00 MSY 638315P 63.00 83.00 15.00
MSY 50588 50.00 58.00 8.00 MSY 65738 65.00 73.00 8.00
MSY 50606 50.00 60.00 6.00 MSY 65756 65.00 75.00 6.00
MSY 50606P 50.00 60.00 6.00 MSY 657512 65.00 75.00 12.00
MSY 506073P 50.00 60.00 7.30 MSY 65809 65.00 80.00 9.00
MSY 506010 50.00 60.00 10.00 MSY 658010 65.00 80.00 10.00
MSY 506010P 50.00 60.00 10.00 MSY 658012 65.00 80.00 12.00
MSY 506012 50.00 60.00 12.00 MSY 658012P 65.00 80.00 12.00
MSY 506012P 50.00 60.00 12.00 MSY 658512 65.00 85.00 12.00
MSY 50636 50.00 63.00 6.00 MSY 658512P 65.00 85.00 12.00
MSY506510 50.00 65.00 10.00 MSY 659015P 65.00 90.00 15.00
MSY 506510P 50.00 65.00 10.00 MSY 67776 67.00 77.00 6.00
MSY 5065114 50.00 65.00 11.40 MSY 70806P 70.00 80.00 6.00
MSY 507010 50.00 70.00 10.00 MSY 708012 70.00 80.00 12.00
MSY 507010P 50.00 70.00 10.00 MSY 708012P 70.00 80.00 12.00
MSY 507012 50.00 70.00 12.00 MSY 708210 70.00 82.00 10.00
MSY 507012P 50.00 70.00 12.00 MSY 7083114P 70.00 83.00 11.40
MSY 53636 53.00 63.00 6.00 MSY 7085114P 70.00 85.00 11.40
MSY 55638 55.00 63.00 8.00 MSY 708512 70.00 85.00 12.00
MSY 55656P 55.00 65.00 6.00 MSY 709010P 70.00 90.00 10.00
MSY 556510P 55.00 65.00 10.00 MSY 709012 70.00 90.00 12.00
MSY 556512 55.00 65.00 12.00 MSY 709012P 70.00 90.00 12.00
MSY 557012 55.00 70.00 12.00 MSY 709018 70.00 90.00 18.00
MSY 557012P 55.00 70.00 12.00 MSY 71806 71.00 80.00 6.00
MSY 557512 55.00 75.00 12.00 MSY 75856 75.00 85.00 6.00
MSY 5671114 56.00 71.00 11.40 MSY 75858 75.00 85.00 8.00
MSY 60688P 60.00 68.00 8.00 MSY 758512 75.00 85.00 12.00
Urethane U-Cups
MSY 758512P 75.00 85.00 12.00 MSY 10512515 105.00 125.00 15.00
MSY 759011P 75.00 90.00 11.00 MSY 10512515P 105.00 125.00 15.00
MSY 759012 75.00 90.00 12.00 MSY 10513012 105.00 130.00 12.00
MSY 759512 75.00 95.00 12.00 MSY 1101259 110.00 125.00 9.00
MSY 759512P 75.00 95.00 12.00 MSY 11012512 110.00 125.00 12.00
MSY 80888 80.00 88.00 8.00 MSY 11012515 110.00 125.00 15.00
MSY 80906P 80.00 90.00 6.00 MSY 11013012P 110.00 130.00 12.00
MSY 80908P 80.00 90.00 8.00 MSY 110130145P 110.00 130.00 14.50
MSY 809010 80.00 90.00 10.00 MSY 11013015 110.00 130.00 15.00
MSY 809010P 80.00 90.00 10.00 MSY 1121259P 112.00 125.00 9.00
MSY 809012 80.00 90.00 12.00 MSY 11512514 115.00 125.00 14.00
MSY 809012P 80.00 90.00 12.00 MSY 11512515 115.00 125.00 15.00
MSY 8095114P 80.00 95.00 11.40 MSY 1151309 115.00 130.00 9.00
MSY 809512 80.00 95.00 12.00 MSY 11513515 115.00 135.00 15.00
MSY 8010010P 80.00 100.00 10.00 MSY 11514018 115.00 140.00 18.00
MSY 8010012 80.00 100.00 12.00 MSY 1201359 120.00 135.00 9.00
MSY 8010012P 80.00 100.00 12.00 MSY 12014012P 120.00 140.00 12.00
MSY 851009P 85.00 100.00 9.00 MSY 12014015 120.00 140.00 15.00
MSY 8510010 85.00 100.00 10.00 MSY 12014015P 120.00 140.00 15.00
MSY 8510010P 85.00 100.00 10.00 MSY 1221306P 122.00 130.00 6.00
MSY 8510012 85.00 100.00 12.00 MSY 12514015 125.00 140.00 15.00
MSY 8510012P 85.00 100.00 12.00 MSY 12514515 125.00 145.00 15.00
MSY 8510512P 85.00 105.00 12.00 MSY 12815015 128.00 150.00 15.00
MSY 9010010 90.00 100.00 10.00 MSY 13015015 130.00 150.00 15.00
MSY9010012 90.00 100.00 12.00 MSY 13015715 130.00 157.00 15.00
MSY9010510P 90.00 105.00 10.00 MSY 1351509 135.00 150.00 9.00
MSY 9010512 90.00 105.00 12.00 MSY 13515011 135.00 150.00 11.00
MSY 9011012 90.00 110.00 12.00 MSY 13515016 135.00 150.00 16.00
MSY 9011012P 90.00 110.00 12.00 MSY 13515515 135.00 155.00 15.00
MSY 9011015 90.00 110.00 15.00 MSY 13515515P 135.00 155.00 15.00
MSY 9510512 95.00 105.00 12.00 MSY 13615085 136.00 150.00 8.50
MSY 951109P 95.00 110.00 9.00 MSY 14016012P 140.00 160.00 12.00
MSY 9511012 95.00 110.00 12.00 MSY 14016015 140.00 160.00 15.00
MSY 9511512 95.00 115.00 12.00 MSY 14016015P 140.00 160.00 15.00
MSY 10010812P 100.00 108.00 12.00 MSY 1451609 145.00 160.00 9.00
MSY 1001108 100.00 110.00 8.00 MSY 150160135 150.00 160.00 13.50
MSY 10011510P 100.00 115.00 10.00 MSY 150170145P 150.00 170.00 14.50
MSY 10011512 100.00 115.00 12.00 MSY 15017015 150.00 170.00 15.00
MSY 100120114 100.00 120.00 11.40 MSY 1601759 160.00 175.00 9.00
MSY 10012012 100.00 120.00 12.00 MSY 16018015 160.00 180.00 15.00
MSY 10012012P 100.00 120.00 12.00 MSY 16018015P 160.00 180.00 15.00
MSY 10012512 100.00 125.00 12.00 MSY 16019018 160.00 190.00 18.00
MSY 100125124P 100.00 125.00 12.40 MSY 17018520 170.00 185.00 20.00
MSY 10012515 100.00 125.00 15.00 MSY 17019015 170.00 190.00 15.00
MSY 10013015 100.00 130.00 15.00 MSY 17020018 170.00 200.00 18.00
MSY 1051209P 105.00 120.00 9.00 MSY 17518579P 175.00 185.00 7.90
Symmetrical Style
Material Dimensions
Urethane U-Cups
Urethane U-Cups
O.D. I.D.
Suffix:
Blank - Standard
BH - Bump Heel (Double Lip)
Rod Style
Suffix:
Urethane U-Cups
Material Dimensions
Part Number I.D. O.D. Width Standard Double lip
MRO 283657 28.00 36.00 5.70 X
Blank BH MRO 28368 28.00 36.00 8.00 X
MRO 28388 28.00 38.00 8.00 BH
MRO 28536565 28.50 36.50 6.50 BH
MRO 303857 30.00 38.00 5.70 X
MRO 30386 30.00 38.00 6.00 X
MRO 30388 30.00 38.00 8.00 X
MRO 30407 30.00 40.00 7.00 BH
MRO 304072 30.00 40.00 7.20 X
MRO 304010 30.00 40.00 10.00 X BH
MRO 304310 30.00 43.00 10.00 X
MRO 324057 32.00 40.00 5.70 X
MRO 32407 32.00 40.00 7.00 BH
MRO 324273 32.00 42.00 7.30 X
MRO 324210 32.00 42.00 10.00 BH
MRO 324710 32.00 47.00 10.00 X
MRO 3247225 32.00 47.00 22.50 X
MRO 334310 33.00 43.00 10.00 X BH
MRO 354357 35.00 43.00 5.70 X BH
MRO 35456 35.00 45.00 6.00 X
MRO 35457 35.00 45.00 7.00 BH
MRO 354572 35.00 45.00 7.20 X
MRO 354510 35.00 45.00 10.00 X
MRO 364457 36.00 44.00 5.70 X
MRO 364482 36.00 44.00 8.20 X
MRO 364673 36.00 46.00 7.30 X
MRO 364610 36.00 46.00 10.00 X BH
MRO 365110 36.00 51.00 10.00 BH
MRO 404857 40.00 48.00 5.70 X BH
MRO 404882 40.00 48.00 8.20 X
MRO 40507 40.00 50.00 7.00 X
MRO 405073 40.00 50.00 7.30 X
MRO 405082 40.00 50.00 8.20 X
MRO 405010 40.00 50.00 10.00 X BH
MRO 405595 40.00 55.00 9.50 X
MRO 405510 40.00 55.00 10.00 X BH
MRO 425057 42.00 50.00 5.70 X
MRO 425211 42.00 52.00 11.00 X
MRO 436011 43.00 60.00 11.00 X
Suffix:
Urethane U-Cups
Material Dimensions
Part Number I.D. O.D. Width Standard Double lip
MRO 455382 45.00 53.00 8.20 X
MRO 4553113 45.00 53.00 11.30 BH Blank BH
MRO 45556 45.00 55.00 6.00 BH
MRO 455573 45.00 55.00 7.30 BH
MRO 455575 45.00 55.00 7.50
MRO 45558 45.00 55.00 8.00 X
MRO 455510 45.00 55.00 10.00 X
MRO 4555115 45.00 55.00 11.50 BH
MRO 45567 45.00 56.00 7.00 X
MRO 4557795 45.00 57.70 9.50 BH
MRO 456010 45.00 60.00 10.00 BH
MRO505710 50.00 57.00 10.00 BH
MRO 5058109 50.00 58.00 10.90 X
MRO 50606 50.00 60.00 6.00 BH
MRO 506073 50.00 60.00 7.30 X
MRO 50608 50.00 60.00 8.00 X
MRO 506010 50.00 60.00 10.00 X BH
MRO 506012 50.00 60.00 12.00 X
MRO 506295 50.00 62.00 9.50 X
MRO 506210 50.00 62.00 10.00 X
MRO 506310 50.00 63.00 10.00 X
MRO 506510 50.00 65.00 10.00 X BH
MRO 5065114 50.00 65.00 11.40 X BH
MRO 526210 52.00 62.00 10.00 BH
MRO 537011 53.00 70.00 11.00 X
MRO 556573 55.00 65.00 7.30 X
MRO 556510 55.00 65.00 10.00 X
MRO 5565118 55.00 65.00 11.80 X
MRO 556810 55.00 68.00 10.00 X
MRO 557010 55.00 70.00 10.00 X
MRO 566665 56.00 66.00 6.50 X
MRO 566673 56.00 66.00 7.30 X
MRO 566682 56.00 66.00 8.20 X
MRO 566610 56.00 66.00 10.00 BH
MRO 56719 56.00 71.00 9.00 X
MRO 5671114 56.00 71.00 11.40 X BH
MRO 587095 58.00 70.00 9.50 X
MRO 607073 60.00 70.00 7.30 X
MRO 607010 60.00 70.00 10.00 X
Rod Style
Suffix:
Urethane U-Cups
Material Dimensions
Part Number I.D. O.D. Width Standard Double lip
MRO 6070118 60.00 70.00 11.80 X
Blank BH MRO 607210 60.00 72.00 10.00 X
MRO 607310 60.00 73.00 10.00 X
MRO 607510 60.00 75.00 10.00 X BH
MRO 6075165 60.00 75.00 16.50 BH
MRO 63736 63.00 73.00 6.00 X
MRO 6373118 63.00 73.00 11.80 X
MRO 637587 63.00 75.00 8.70 X
MRO 6378114 63.00 78.00 11.40 X BH
MRO 6383114 63.00 83.00 11.40 BH
MRO 657787 65.00 77.00 8.70 X
MRO 6577795 65.00 77.70 9.50 BH
MRO 657810 65.00 78.00 10.00 X
MRO 687664 68.00 76.00 6.40 X
MRO 7078109 70.00 78.00 10.90 X
MRO 7080118 70.00 80.00 11.80 X
MRO 708287 70.00 82.00 8.70 X BH
MRO 7085114 70.00 85.00 11.40 X
MRO 7090146 70.00 90.00 14.60 X
MRO 7585118 75.00 85.00 11.80 X
MRO 758787 75.00 87.00 8.70 X
MRO 75879 75.00 87.00 9.00 X
MRO 758810 75.00 88.00 10.00 X
MRO 7588132 75.00 88.00 13.20 X
MRO 75909 75.00 90.00 9.00 X
MRO 759010 75.00 90.00 10.00 X
MRO 759512 75.00 95.00 12.00 X
MRO 788683 78.00 86.00 8.30 X
MRO 80888 80.00 88.00 8.00 X
MRO 8090118 80.00 90.00 11.80 X
MRO 809287 80.00 92.00 8.70 X
MRO 809510 80.00 95.00 10.00 X
MRO 8095114 80.00 95.00 11.40 BH
MRO 80100114 80.00 100.00 11.40 X
MRO 80100146 80.00 100.00 14.60 BH
MRO 8010515 80.00 105.00 15.00 X
MRO 859787 85.00 97.00 8.70 X
MRO 85100114 85.00 100.00 11.40 X
MRO 8510012 85.00 100.00 12.00 X
Suffix:
Urethane U-Cups
Material Dimensions
Part Number I.D. O.D. Width Standard Double lip
MRO 9010073 90.00 100.00 7.30 BH
MRO 9010287 90.00 102.00 8.70 BH Blank BH
MRO 9010512 90.00 105.00 11.40 X
MRO 90110114 90.00 110.00 11.40 X BH
MRO 95103115 95.00 103.00 11.50 BH
MRO 951109 95.00 110.00 9.00 X
MRO 9511010 95.00 110.00 10.00 X
MRO 9511512 95.00 115.00 12.00 X
MRO 10011013 100.00 110.00 13.00 BH
MRO 100115116 100.00 115.00 11.60 X
MRO 100120114 100.00 120.00 11.40 X BH
MRO 10012015 100.00 120.00 15.00 X
MRO 10511512 105.00 115.00 12.00 X
MRO 105120114 105.00 120.00 11.40 X
MRO 105125146 105.00 125.00 14.60 X
MRO 110125109 110.00 125.00 10.90 X
MRO 110130146 110.00 130.00 14.60 X
MRO 11013016 110.00 130.00 16.00 X
MRO 110135145 110.00 135.00 14.50 BH
MRO 11512514 115.00 125.00 14.00 BH
MRO 11513011 115.00 130.00 11.00 X
MRO 115135146 115.00 135.00 14.60 X
MRO 12013516 120.00 135.00 16.00 X
MRO 12014013 120.00 140.00 13.00 X
MRO 120140146 120.00 140.00 14.60 X
MRO 12014517 120.00 145.00 17.00 X
MRO 125140109 125.00 140.00 10.90 X
MRO 12514512 125.00 145.00 12.00 X
MRO 125145146 125.00 145.00 14.60 X
MRO 12514516 125.00 145.00 16.00 BH
MRO 12515019 125.00 150.00 19.00 X
MRO 130140145 130.00 140.00 14.50 X
MRO 1301459 130.00 145.00 9.00 X
MRO 130150146 130.00 150.00 14.60 X
MRO 135145135 135.00 145.00 13.50 X
MRO 14016012 140.00 160.00 12.00 X BH
MRO 140160146 140.00 160.00 14.60 BH
MRO 150170146 150.00 170.00 14.60 X
MRO 150180173 150.00 180.00 17.30 X
Rod Style
Suffix:
Urethane U-Cups
Blank BH
Material Dimensions
Part Number I.D. O.D. Width Standard Double lip
MRO 160185146 160.00 185.00 14.60 X
MRO 180200146 180.00 200.00 14.60 X
MRO 19021015 190.00 210.00 15.00 X
MRO 20021215 200.00 212.00 15.00 X
MRO 20022016 200.00 220.00 16.00 X
MRO 200225146 200.00 225.00 14.60 X
MRO 200230227 200.00 230.00 22.70 X
MRO 210230146 210.00 230.00 14.60 X
MRO 23025014 230.00 250.00 14.00 X
MRO 24026016 240.00 260.00 16.00 X
MRO 24027019 240.00 270.00 19.00 X
MRO 270300173 270.00 300.00 17.30 X
MRO 285315173 285.00 315.00 17.30 X
MRO 32535520 325.00 355.00 20.00 X
MRO 340370173 340.00 370.00 17.30 X
MRO 34037020 340.00 370.00 20.00 BH
MRO 360380146 360.00 380.00 14.60 X
MRO 36039020 360.00 390.00 20.00 X
MRO 370390146 370.00 390.00 14.60 X
MRO 39042019 390.00 420.00 19.00 X
MRO 50054034 500.00 540.00 34.00 X
Urethane U-Cups
I.D. O.D.
Material Dimensions
Part Numbers I.D. O.D. Width
MPI 2230425 22.00 30.00 4.25
MPI 2230625 22.00 30.00 6.25
MPI 254095 25.00 40.00 9.50
MPI 33408 33.00 40.00 8.00
MPI 334012 33.00 40.00 12.00
MPI 486310 48.00 63.00 10.00
MPI 50607 50.00 60.00 7.00
MPI 536373 53.00 63.00 7.30
MPI 536312 53.00 63.00 12.00
MPI 6068115 60.00 68.00 11.50
MPI 61716 61.00 71.00 6.00
MPI 7080425 70.00 80.00 4.25
MPI 728012 72.00 80.00 12.00
MPI 759010 75.00 90.00 10.00
MPI 78100145 78.00 100.00 14.50
MPI 8510515 85.00 105.00 15.00
MPI 9010042 90.00 100.00 4.20
MPI 9011010 90.00 110.00 10.00
MPI 11013012 110.00 130.00 12.00
MPI 1121259 112.00 125.00 9.00
MPI 11213212 112.00 132.00 12.00
MPI 13515010 135.00 150.00 10.00
MPI 1451609 145.00 160.00 9.00
MPI 25028022 250.00 280.00 22.00
MPI 28030015 280.00 300.00 15.00
MPI 33536018 335.00 360.00 18.00
MPI 42046030 420.00 460.00 30.00
W
Urethane U-Cups
I.D. O.D.
Material Dimensions
Part Numbers I.D. O.D. Width
MPI 30459UE 30.00 45.00 9.00
MPI 304595UE 30.00 45.00 9.50
MPI 355095UE 35.00 50.00 9.50
MPI 355010UE 35.00 50.00 10.00
MPI 456095UE 45.00 60.00 9.50
MPI 486393UE 48.00 63.00 9.30
MPI 5070125UE 50.00 70.00 12.50
MPI 6080122UE 60.00 80.00 12.20
MPI 80100122UE 80.00 100.00 12.20
MPI 8510095UE 85.00 100.00 9.50
MPI 100125155UE 100.00 125.00 15.50
MPI 120140125UE 120.00 140.00 12.50
MPI 12015019UE 120.00 150.00 19.00
MPI 115140152UE 125.00 140.00 15.20
MPI 130160186UE 130.00 160.00 18.60
MPI 150180186UE 150.00 180.00 18.60
MPI 170200186UE 170.00 200.00 18.90
MPI 220250186UE 220.00 250.00 18.60
MPI 22525017UE 225.00 250.00 17.00
MPI 250280186UE 250.00 280.00 18.60
MPI 27030019UE 270.00 300.00 19.00
Buffer Seals
Loader Materials Temp. Range
Nitrile -40°C to 120°C
Viton®/Fluorocarbon -26°C to 204°C
Urethane -54°C to 105°C
MR MR w/ Pressure S
Relief Port (PR)
Product Description:
Buffer seals are usually used in combination with another rod seal, typically a U-cup style seal. Buffer seals in rod applications
are designed to absorb pressure fluctuations when working under high-load conditions. This serves a purpose of increasing
the lifespan of the rod seal.
Part Numbers:
MRB - ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___
Example: MRB - 20 307 42 MR - Bronze filled PTFE Metric MR Style Buffer Seal with a Nitrile Loader
- 20.00 mm I.D., 30.70 mm O.D., 4.20 mm Width
MR Style D
C
Buffer Seals
B A
Buffer Seals
Gland Dimensions Gland
I.D. O.D. Width Height Profile Radius
Part Number A B C D R
MRB 4252742 MR 42.00 52.70 4.20 4.00 5.35 0.80
MRB 4257163 MR 42.00 57.10 6.30 5.90 7.55 1.20
MRB 4555742 MR 45.00 55.70 4.20 4.00 5.35 0.80
MRB 4560163 MR 45.00 60.10 6.30 5.90 7.55 1.20
MRB 5060742 MR 50.00 60.70 4.20 4.00 5.35 0.80
MRB 5065163 MR 50.00 65.10 6.30 5.90 7.55 1.20
MRB 5565742 MR 55.00 65.70 4.20 4.00 5.35 0.80
MRB 5666742 MR 56.00 66.70 4.20 4.00 5.35 0.80
MRB 5671163 MR 56.00 71.10 6.30 5.90 7.55 1.20
MRB 6070742 MR 60.00 70.70 4.20 4.00 5.35 0.80
MRB 6075163 MR 60.00 75.10 6.30 5.90 7.55 1.20
MRB 6378163 MR 63.00 78.10 6.30 5.90 7.55 1.20
MRB 6580163 MR 65.00 80.10 6.30 5.90 7.55 1.20
MRB 7085163 MR 70.00 85.10 6.30 5.90 7.55 1.20
MRB 7590163 MR 75.00 90.10 6.30 5.90 7.55 1.20
MRB 8095163 MR 80.00 95.10 6.30 5.90 7.55 1.20
MRB 85100163 MR 85.00 100.10 6.30 5.90 7.55 1.20
MRB 90105163 MR 90.00 105.10 6.30 5.90 7.55 1.20
MRB 95110163 MR 95.00 110.10 6.30 5.90 7.55 1.20
MRB 100115163 MR 100.00 115.10 6.30 5.90 7.55 1.20
MRB 105120163 MR 105.00 120.10 6.30 5.90 7.55 1.20
MRB 110125163 MR 110.00 125.10 6.30 5.90 7.55 1.20
MRB 115130163 MR 115.00 130.10 6.30 5.90 7.55 1.20
MRB 120135163 MR 120.00 135.10 6.30 5.90 7.55 1.20
MRB 125140163 MR 125.00 140.10 6.30 5.90 7.55 1.20
MRB 130145163 MR 130.00 145.10 6.30 5.90 7.55 1.20
MRB 140155163 MR 140.00 155.10 6.30 5.90 7.55 1.20
MRB 150165163 MR 150.00 165.10 6.30 5.90 7.55 1.20
MRB 160175163 MR 160.00 175.10 6.30 5.90 7.55 1.20
MRB 170185163 MR 170.00 185.10 6.30 5.90 7.55 1.20
MRB 180195163 MR 180.00 195.10 6.30 5.90 7.55 1.20
MRB 190205163 MR 190.00 205.10 6.30 5.90 7.55 1.20
MRB 200220581 MR 200.00 220.50 8.10 7.60 10.25 2.00
MRB 210230581 MR 210.00 230.50 8.10 7.60 10.25 2.00
MRB 220240581 MR 220.00 240.50 8.10 7.60 10.25 2.00
MRB 230250581 MR 230.00 250.50 8.10 7.60 10.25 2.00
MRB 240260581 MR 240.00 260.50 8.10 7.60 10.25 2.00
MRB 250270581 MR 250.00 270.50 8.10 7.60 10.25 2.00
MR Style
Buffer Seals
Buffer Seals
A B
Standard Material: Moly glass filled PTFE ring with a Nitrile loader.
Product Description:
Modular bearings are used in both rod and piston applications. Modular bearings act as a wear and load bearing surface
to help extend the life of a U-cup. The standard material of modular bearings is a durable Nylon.
Part Numbers:
MBM - ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___
Example: MBM - 40537 - Nylon Modular Bearing - 40.00 mm I.D. x 50.00 mm O.D. x 7.00 mm C/S
Wear Rings
Glass filled PTFE -200°C to 250°C
Carbon Graphite filled PTFE -200°C to 250°C
Phenolic -60°C to 130°C
PEEK -70°C to 260°C
Product Description:
The function of the wear ring is to help keep the piston centered, which allows for even wear and pressure distribution
on the seals. Hi-Tech Seals’ standard wear ring materials are Nylon and Phenolic; additional material options are available
upon request. Wear rings are used in both piston and rod applications. There are three different cut styles available. The
chart below details the benefits of each style.
Part Numbers:
WRM - ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___
W W
Part Number I.D. O.D. Width Part Number I.D. O.D. Width
WRM 202563 20.00 25.00 6.30 WRM 455015 45.00 50.00 15.00
WRM 253056 25.00 30.00 5.60 WRM 4551225 45.00 51.00 22.50
WRM 253097 25.00 30.00 9.70 WRM 465115 46.00 51.00 15.00
WRM 253196 25.00 31.00 9.60 WRM 475210 47.00 52.00 10.00
WRM 273056 27.00 30.00 5.60 WRM 495596 49.00 55.00 9.60
WRM 273256 27.00 30.00 5.60 WRM 505556 50.00 55.00 5.60
WRM 273263 27.00 32.00 6.30 WRM 505595 50.00 55.00 9.50
WRM 28328 28.00 32.00 8.00 WRM 505597 50.00 55.00 9.70
WRM 283295 28.00 32.00 9.50 WRM 5056127 50.00 56.00 12.70
WRM 283496 28.00 34.00 9.60 WRM 505515 50.00 55.00 15.00
WRM 303356 30.00 33.00 5.60 WRM 505620 50.00 56.00 20.00
WRM 303497 30.00 34.00 9.70 WRM 505630 50.00 56.00 30.00
WRM 303420 30.00 34.00 20.00 WRM 505812 50.00 58.00 12.00
WRM 303597 30.00 35.00 9.70 WRM 515656 51.00 56.00 5.60
WRM 323551 32.00 35.00 5.10 WRM 515697 51.00 56.00 9.70
WRM 324012 32.00 40.00 12.00 WRM 526010 52.00 60.00 10.00
WRM 344096 34.00 40.00 9.60 WRM 5290127 52.00 90.00 12.70
WRM 35386 35.00 38.00 6.00 WRM 546096 54.00 60.00 9.60
WRM 353996 35.00 39.00 9.60 WRM 5460125 54.00 60.00 12.50
WRM 363956 36.00 39.00 5.60 WRM 5460246 54.00 60.00 24.60
WRM 364156 36.00 41.00 5.60 WRM 505695 55.00 56.00 9.50
WRM 364197 36.00 41.00 9.70 WRM 556096 55.00 60.00 9.60
WRM 404356 40.00 43.00 5.60 WRM 56608 56.00 60.00 8.00
WRM 404492 40.00 44.00 9.20 WRM 566010 56.00 60.00 10.00
WRM 404556 40.00 45.00 5.60 WRM 566197 56.00 61.00 9.70
WRM 404597 40.00 45.00 9.70 WRM 566115 56.00 61.00 15.00
WRM 404696 40.00 46.00 9.60 WRM 566225 56.00 62.00 25.00
WRM 414596 41.00 45.00 9.60 WRM 5763125 57.00 63.00 12.50
WRM 445096 44.00 50.00 9.60 WRM 586397 58.00 63.00 9.70
WRM 455056 45.00 50.00 5.60 WRM 606595 60.00 65.00 9.50
WRM 455097 45.00 50.00 9.70 WRM 606597 60.00 65.00 9.70
WRM 455010 45.00 50.00 10.00 WRM 6065193 60.00 65.00 19.30
Wear Rings
Part Number I.D. O.D. Width Part Number I.D. O.D. Width
WRM 636825 63.00 68.00 25.00 WRM 849025 84.00 90.00 25.00
WRM 6369315 63.00 69.00 31.50 WRM 85905 85.00 90.00 5.00
WRM 637030 63.00 70.00 30.00 WRM 859095 85.00 90.00 9.50
WRM 6470127 64.00 70.00 12.70 WRM 8591125 85.00 91.00 12.50
WRM 65708 65.00 70.00 8.00 WRM 86946 86.00 94.00 6.00
WRM 657095 65.00 70.00 9.50 WRM 90956 90.00 95.00 6.00
WRM 657096 65.00 70.00 9.60 WRM 909595 90.00 95.00 9.50
WRM 657015 65.00 70.00 15.00 WRM 909597 90.00 95.00 9.70
WRM 657020 65.00 70.00 20.00 WRM 909515 90.00 95.00 15.00
WRM 707556 70.00 75.00 5.60 WRM 909525 90.00 95.00 25.00
WRM 70756 70.00 75.00 6.00 WRM 91100143 91.00 100.00 14.30
WRM 707596 70.00 75.00 9.60 WRM 93710015 93.70 100.00 15.00
WRM 707515 70.00 75.00 15.00 WRM 94100127 94.00 100.00 12.70
WRM 707525 70.00 75.00 25.00 WRM 9510096 95.00 100.00 9.60
WRM 7076195 70.00 76.00 19.50 WRM 9510015 95.00 100.00 15.00
WRM 717515 71.00 75.00 15.00 WRM 9710510 97.00 105.00 10.00
WRM 728012 72.00 80.00 12.00 WRM 99105245 99.00 105.00 24.50
WRM 748020 74.00 80.00 20.00 WRM 10010595 100.00 105.00 9.50
WRM 757977 75.00 79.00 7.70 WRM 10010515 100.00 105.00 15.00
WRM 758054 75.00 80.00 5.40 WRM 1021106 102.00 110.00 6.00
WRM 758079 75.00 80.00 7.90 WRM 10211095 102.00 110.00 9.50
WRM 758095 75.00 80.00 9.50 WRM 104110125 104.00 110.00 12.50
WRM 758097 75.00 80.00 9.70 WRM 10411025 104.00 110.00 25.00
WRM 7580148 75.00 80.00 14.80 WRM 10511079 105.00 110.00 7.90
WRM 758015 75.00 80.00 15.00 WRM 10511097 105.00 110.00 9.70
WRM 758020 75.00 80.00 20.00 WRM 10511015 105.00 110.00 15.00
WRM 768010 76.00 80.00 10.00 WRM 105111125 105.00 111.00 12.50
WRM 808597 80.00 85.00 9.70 WRM 10611420 106.00 114.00 20.00
WRM 808525 80.00 85.00 25.00 WRM 10811279 108.00 112.00 7.90
WRM 8086125 80.00 86.00 12.50 WRM 11011597 110.00 115.00 9.70
WRM 808635 80.00 86.00 35.00 WRM 11011515 110.00 115.00 15.00
WRM 82906 82.00 90.00 6.00 WRM 11011525 110.00 115.00 25.00
WRM 849015 84.00 90.00 15.00 WRM 11412020 114.00 120.00 20.00
WRM 8490245 84.00 90.00 24.50 WRM 11412030 114.00 120.00 30.00
Part Number I.D. O.D. Width Part Number I.D. O.D. Width
WRM 11512056 115.00 120.00 5.60 WRM 133140148 133.00 140.00 14.80
WRM 11512079 115.00 120.00 7.90 WRM 13314035 133.00 140.00 35.00
WRM 11512095 115.00 120.00 9.50 WRM 134140125 134.00 140.00 12.50
WRM 11512097 115.00 120.00 9.70 WRM 13514025 134.00 140.00 25.00
WRM 115120148 115.00 120.00 14.80 WRM 13514079 135.00 140.00 7.90
WRM 11512025 115.00 120.00 25.00 WRM 13514095 135.00 140.00 9.50
WRM 116125143 116.00 125.00 14.30 WRM 135140148 135.00 140.00 14.80
WRM 11712579 117.00 125.00 7.90 WRM 13714595 137.00 145.00 9.50
WRM 1181238 118.00 123.00 8.00 WRM 1381439 138.00 143.00 9.00
WRM 11912520 119.00 125.00 20.00 WRM 138145148 138.00 145.00 14.80
WRM 12012579 120.00 125.00 7.90 WRM 139145125 139.00 145.00 12.50
WRM 12012595 120.00 125.00 9.50 WRM 14014579 140.00 145.00 7.90
WRM 120125148 120.00 125.00 14.80 WRM 14014595 140.00 145.00 9.50
WRM 12012515 120.00 125.00 15.00 WRM 14014515 140.00 145.00 15.00
WRM 12012525 120.00 125.00 25.00 WRM 14014840 140.00 148.00 40.00
WRM 12012540 120.00 125.00 40.00 WRM 14515095 145.00 150.00 9.50
WRM 121125198 121.00 125.00 19.80 WRM 15015515 150.00 155.00 15.00
WRM 12112525 121.00 125.00 25.00 WRM 153160148 153.00 160.00 14.80
WRM 12313030 123.00 130.00 30.00 WRM 15316030 153.00 160.00 30.00
WRM 1241306 124.00 130.00 6.00 WRM 15316040 153.00 160.00 40.00
WRM 12513079 125.00 130.00 7.90 WRM 154160195 154.00 160.00 19.50
WRM 12513095 125.00 130.00 9.50 WRM 15516097 155.00 160.00 9.70
WRM 12513015 125.00 130.00 15.00 WRM 15516015 155.00 160.00 15.00
WRM 12513130 125.00 131.00 30.00 WRM 15616079 156.00 160.00 7.90
WRM 12813525 128.00 135.00 25.00 WRM 15816310 158.00 163.00 10.00
WRM 13013579 130.00 135.00 7.90 WRM 16016597 160.00 165.00 9.70
WRM 13013595 130.00 135.00 9.50 WRM 16016515 160.00 165.00 15.00
WRM 130135148 130.00 135.00 14.80 WRM 16517095 165.00 170.00 9.50
WRM 13013515 130.00 135.00 15.00 WRM 16517015 165.00 170.00 15.00
WRM 13113579 131.00 135.00 7.90 WRM 17017515 170.00 175.00 15.00
WRM 1321406 132.00 140.00 6.00 WRM 174180192 174.00 180.00 19.20
WRM 13214097 132.00 140.00 9.70 WRM 17518097 175.00 180.00 9.70
WRM 13214020 132.00 140.00 20.00 WRM 17518015 175.00 180.00 15.00
WRM 13314097 133.00 140.00 9.70 WRM 18018515 180.00 185.00 15.00
Wear Rings
Part Number I.D. O.D. Width Part Number I.D. O.D. Width
WRM 18018825 180.00 188.00 25.00 WRM 29230040 292.00 300.00 40.00
WRM 185190148 185.00 190.00 14.80 WRM 29430040 294.00 300.00 40.00
WRM 18519015 185.00 190.00 15.00 WRM 295300245 295.00 300.00 24.50
WRM 19019515 190.00 195.00 15.00 WRM 30030515 300.00 305.00 15.00
WRM 192200225 192.00 200.00 22.50 WRM 30030825 300.00 308.00 25.00
WRM 19420012 194.00 200.00 12.00 WRM 30831325 308.00 313.00 25.00
WRM 194200192 194.00 200.00 19.20 WRM 31432015 314.00 320.00 15.00
WRM 19420020 194.00 200.00 20.00 WRM 315320245 315.00 320.00 24.50
WRM 19420035 194.00 200.00 35.00 WRM 32032525 320.00 325.00 25.00
WRM 19420050 194.00 200.00 50.00 WRM 34034515 340.00 345.00 15.00
WRM 19520095 195.00 200.00 9.50 WRM 36036525 360.00 365.00 25.00
WRM 19520096 195.00 200.00 9.60 WRM 37238025 372.00 380.00 25.00
WRM 19520097 195.00 200.00 9.70 WRM 37538015 375.00 380.00 15.00
WRM 19520015 195.00 200.00 15.00 WRM 38539015 385.00 390.00 15.00
WRM 19520020 195.00 200.00 20.00 WRM 39540015 395.00 400.00 15.00
WRM 19520025 195.00 200.00 25.00 WRM 39540025 395.00 400.00 25.00
WRM 20020512 200.00 205.00 12.00 WRM 40040525 400.00 405.00 25.00
WRM 20020515 200.00 205.00 15.00 WRM 41542025 415.00 420.00 25.00
WRM 20220710 202.00 207.00 10.00 WRM 42243025 422.00 430.00 25.00
WRM 20420910 204.00 209.00 10.00 WRM 42543025 425.00 430.00 25.00
WRM 20521015 205.00 210.00 15.00 WRM 44044525 440.00 445.00 25.00
WRM 21021597 210.00 215.00 9.70 WRM 46046525 460.00 465.00 25.00
WRM 21021512 210.00 215.00 12.00 WRM 49550025 495.00 500.00 25.00
WRM 21021515 210.00 215.00 15.00 WRM 53053825 530.00 538.00 25.00
WRM 22523015 225.00 230.00 15.00 WRM 60060525 600.00 605.00 25.00
WRM 24024515 240.00 245.00 15.00 WRM 60060825 600.00 608.00 25.00
WRM 24225025 242.00 250.00 25.00 WRM 62563025 625.00 630.00 25.00
WRM 24525015 245.00 250.00 15.00 WRM 70571015 705.00 710.00 15.00
WRM 27027515 270.00 275.00 15.00 WRM 78880030 788.00 800.00 30.00
WRM 27227715 272.00 277.00 15.00 WRM 79079825 790.00 798.00 25.00
WRM 27628115 276.00 281.00 15.00 WRM 80080525 800.00 805.00 25.00
WRM 28028515 280.00 285.00 15.00 WRM 95796525 957.00 965.00 25.00
WRM 29229615 292.00 296.00 15.00
WRM 29229715 292.00 297.00 15.00
Product Description:
A wear strip is designed to perform the same function as a wear ring. Wear strip helps to keep the piston centered, which
allows for even wear and pressure distribution on the seals. This is an excellent product for individuals who need custom
sizes of wear rings. Wear strip can help to cut down on inventory and machining costs. Our standard wear strip material
is bronze filled PTFE.
Wear strip is sold by the inch. To calculate the length of wear strip required for a specific size, we recommend using the
following calculation:
Based on I.D.:
[(Desired Inner Diameter (mm) + C/S) * ∏ (3.14159)] / 25.4 = Length / Unit
Based on O.D.:
[(Desired Outer Diameter (mm) - C/S) * ∏ (3.14159)] / 25.4 = Length / Unit
Part Numbers:
WSM - ___ ___ ___ ___ ___ ___ ___ ___
Example: WSM 3013 - quantity 5 - 5.000” of bronze filled PTFE wear strip - 3.00 mm C/S x 13.00 mm Height
Wear Strip
Wear strip is sold by the inch. Additional sizes and materials are available upon request.
Ring Materials:
40% Bronze PTFE -200°C to 250°C
15% Glass, 5% Moly PTFE -200°C to 250°C
MR E
Product Description:
Piston rings are excellent for sealing in hydraulic and pneumatic cylinder applications. The piston rings provide
excellent low friction with strong chemical resistance. By changing the material of the elastomer or ring we can change
the temperature range, frictional characteristics, extrusion resistance and wearability of the piston seal.
The MR and E styles are stocked with a bronze filled PTFE ring and a Nitrile loader. Additional material combinations
are available upon request.
Part Numbers:
M2P - ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___
Example: M2P - 063 52 42 MR MGV - Metric Moly Glass MR Style Piston Ring with a Viton® Loader - 63.00 mm O.D.,
52.00 mm I.D., 4.20 mm Width
Piston Rings
I.D. O.D.
MR Style
Piston Rings
Additonal sizes and materials options are available upon request. Please contact a Hi-Tech Seals’ sales representative for more
information.
Piston Rings
I.D. O.D.
Additonal sizes and materials options are available upon request. Please contact a Hi-Tech Seals’ sales representative for more
information.
Product Description:
Metric fluid seals are available in three styles: single acting fabric-reinforced (SAM F), single acting fabric-reinforced with an
anti-extrusion ring on the I.D. (SAM FE), and a five piece double acting (DAM). Our double acting fluid seals are designed
for use on split pistons. Double acting fluid seals are composed of a Nitrile sealing element, fabric reinforced base and two
Acetal wear rings.
Part Numbers:
SAM - ___ ___ ___ ___ ___ ___ ___ ___ ___ ___
I.D. O.D. L1 L2
Example: SAM - 70 90 14 FE - Single Acting Fluid Seal w/ an Anti-Extrusion Ring - 70.00 mm I.D., 90.00 mm O.D., 14.00 mm Length
Height
Fluid Seals
O.D. I.D.
F FE
Single Acting
Fluid Seals
F FE
Fluid Seals
SAM 708210 70.00 82.00 10.00 FE
SAM 708412 70.00 84.00 12.00 FE
SAM 7085115 70.00 85.00 11.50 F
SAM 708512 70.00 85.00 12.00 FE
SAM 709013 70.00 90.00 13.00 FE
SAM 709014 70.00 90.00 14.00 FE
SAM 78868 78.00 86.00 8.00 F
SAM 80929 80.00 92.00 9.00 F
SAM 809295 80.00 92.00 9.50 F
SAM 809296 80.00 92.00 9.60 F
SAM 809512 80.00 95.00 12.00 FE
SAM 8010013 80.00 100.00 13.00 FE
SAM 8010015 80.00 100.00 15.00 FE
SAM 85979 85.00 97.00 9.00 F
SAM 85100125 85.00 100.00 12.50 F
SAM 8510510 85.00 105.00 10.00 F
SAM 901029 90.00 102.00 9.00 F
SAM 9010595 90.00 105.00 9.50 F
SAM 9010512 90.00 105.00 12.00 FE
SAM 90110114 90.00 110.00 11.40 FE
SAM 9011015 90.00 110.00 15.00 FE
SAM 95110113 95.00 110.00 11.30 F
SAM 9511513 95.00 115.00 13.00 FE
SAM 100115113 100.00 115.00 11.30 F
SAM 10512015 105.00 120.00 15.00 FE
SAM 110125113 110.00 125.00 11.30 F
SAM 115130113 115.00 130.00 11.30 F
SAM 12014012 120.00 140.00 12.00 FE
SAM 125140113 125.00 140.00 11.30 F
SAM 13014515 130.00 145.00 15.00 F
SAM 13515011 135.00 150.00 11.00 F
SAM 14016014 140.00 160.00 14.00 F
SAM 14016016 140.00 160.00 16.00 F
SAM 14016028 140.00 160.00 28.00 F
SAM 15017015 150.00 170.00 15.00 F
SAM 16018015 160.00 180.00 15.00 F
SAM 170182710 170.00 182.70 10.00 F
SAM 18020015 180.00 200.00 15.00 F
SAM 20022015 200.00 220.00 15.00 F
SAM 20022016 200.00 220.00 16.00 F
SAM 20022535 200.00 225.00 35.00 F
SAM 21023016 210.00 230.00 16.00 F
Double Acting
L2
L1
Fluid Seals
I.D. O.D.
Machine Dimensions
Part Number I.D. O.D. L1 L2
DAM 15251220 15.00 25.00 12.00 20.00
DAM 2130135175 21.00 30.00 13.50 17.50
DAM 2232155207 22.00 32.00 15.50 20.70
DAM 22321628 22.00 32.00 16.00 28.00
DAM 24401830 24.00 40.00 18.00 30.00
DAM 2535155207 25.00 35.00 15.50 20.70
DAM 2535163291 25.00 35.00 16.30 29.10
DAM 26401520 26.00 40.00 15.00 20.00
DAM 29451831 29.00 45.00 18.00 31.00
DAM 30401220 30.00 40.00 12.00 20.00
DAM 304016428 30.00 40.00 16.40 28.00
DAM 31451521 31.00 45.00 15.00 21.00
DAM 32401521 32.00 40.00 15.00 21.00
DAM 34501831 34.00 50.00 18.00 31.00
DAM 34502026 34.00 50.00 20.00 26.00
DAM 38502028 38.00 50.00 20.00 28.00
DAM 39551830 39.00 55.00 18.00 30.00
DAM 39552126 39.00 55.00 21.00 26.00
DAM 40501119 40.00 50.00 11.00 19.00
DAM 4050125205 40.00 50.00 12.50 20.50
DAM 435520529 43.00 55.00 20.50 29.00
DAM 44601831 44.00 60.00 18.00 31.00
DAM 44602026 44.00 60.00 20.00 26.00
DAM 4555125205 45.00 55.00 12.50 20.50
DAM 47631830 47.00 63.00 18.00 30.00
DAM 47631932 47.00 63.00 19.00 32.00
DAM 47632026 47.00 63.00 20.00 26.00
DAM 48602028 48.00 60.00 20.00 28.00
Material Dimensions
Part Number I.D. O.D. L1 L2
DAM 48632030 48.00 63.00 20.00 30.00
Fluid Seals
DAM 49652026 49.00 65.00 20.00 26.00
DAM 50651831 50.00 65.00 18.00 31.00
DAM 50702234 50.00 70.00 22.00 34.00
DAM 51632028 51.00 63.00 20.00 28.00
DAM 536312520 53.00 63.00 12.50 20.00
DAM 54702026 54.00 70.00 20.00 26.00
DAM 55702030 55.00 70.00 20.00 30.00
DAM 55752234 55.00 75.00 22.00 34.00
DAM 55753044 55.00 75.00 30.00 44.00
DAM 58702029 58.00 70.00 20.00 29.00
DAM 59752026 59.00 75.00 20.00 26.00
DAM 60802234 60.00 80.00 22.00 34.00
DAM 6080224352 60.00 80.00 22.40 35.20
DAM 60803145 60.00 80.00 31.00 45.00
DAM 62802229 62.00 80.00 22.00 29.00
DAM 637520528 63.00 75.00 20.50 28.00
DAM 65802028 65.00 80.00 20.00 28.00
DAM 65852234 65.00 85.00 22.00 34.00
DAM 66802233 66.00 80.00 22.00 33.00
DAM 70902234 70.00 90.00 22.00 34.00
DAM 72902229 72.00 90.00 22.00 29.00
DAM 75902030 75.00 90.00 20.00 30.00
DAM 75952236 75.00 95.00 22.00 36.00
DAM 751002234 75.00 100.00 22.00 34.00
DAM 76902232 76.00 90.00 22.00 32.00
DAM 801002240 80.00 100.00 22.00 40.00
DAM 801003554 80.00 100.00 35.00 54.00
DAM 801052235 80.00 105.00 22.00 35.00
DAM 821002230 82.00 100.00 22.00 30.00
DAM 851002030 85.00 100.00 20.00 30.00
DAM 851102235 85.00 110.00 22.00 35.00
DAM 861002232 86.00 100.00 22.00 32.00
DAM 901102537 90.00 110.00 25.00 37.00
DAM 901103554 90.00 110.00 35.00 54.00
DAM 901152235 90.00 115.00 22.00 35.00
DAM 921102230 92.00 110.00 22.00 30.00
DAM 951102030 95.00 110.00 20.00 30.00
DAM 951202235 95.00 120.00 22.00 35.00
DAM 961102232 96.00 110.00 22.00 32.00
DAM 971152229 97.00 115.00 22.00 29.00
DAM 1001202538 100.00 120.00 25.00 38.00
Double Acting
Machine Dimensions
Part Number I.D. O.D. L1 L2
DAM 1001252538 100.00 125.00 25.00 38.00
Fluid Seals
Vee Packing
EPDM -54°C to 150°C
Highly Saturated Nitrile -40°C to 160°C
Aflas™ -9°C to 232°C
Plastic Materials
Nylon -54°C to 121°C
Hytrel® -54°C to 149°C
PEEK -70°C to 260°C
PTFE -200°C to 250°C
Product Description:
Vee packing is typically used in adjustable gland applications such as telescoping truck hoists, pumps and valves. Vee
packing sets are composed of a top and bottom component with a varying numbers of center vee’s. In situations
involving strict chemical, temperature or pressure requirements, the Vee packing set material composition can be
altered to meet the application’s requirements.
Our standard Vee packing set is composed of fabric reinforced Nitrile. Additional material compositions are available.
Please contact a Hi-Tech Seals’ sales representative for details.
Part Numbers:
VPM - ___ ___ ___ ___ ___ ___ ___ ___ ___
Example: VPM 190220505 - Metric Vee Packing Set - 190.00 mm I.D. x 220.00 mm O.D. x 50.50 mm Height
Sets
Vee Packing
I.D. O.D.
Vee Packing
VPM 507026 50.00 70.00 26.00 VPM 709022 70.00 90.00 22.00
VPM 507029 50.00 70.00 29.00 VPM 709030 70.00 90.00 30.00
VPM 507030 50.00 70.00 30.00 VPM 709032 70.00 90.00 32.00
VPM 527226 52.00 72.00 26.00 VPM 7590225 75.00 90.00 22.50
VPM 527230 52.00 72.00 30.00 VPM 759530 75.00 95.00 30.00
VPM 556725 55.00 67.00 25.00 VPM 759540 75.00 95.00 40.00
VPM 5570225 55.00 70.00 22.50 VPM 75100375 75.00 100.00 37.50
VPM 5570265 55.00 70.00 26.50 VPM 789330 78.00 93.00 30.00
VPM 557530 55.00 75.00 30.00 VPM 8095175 80.00 95.00 17.50
VPM 557535 55.00 75.00 35.00 VPM 8095225 80.00 95.00 22.50
VPM 557538 55.00 75.00 38.00 VPM 809525 80.00 95.00 25.00
VPM566820 56.00 68.00 20.00 VPM 8010030 80.00 100.00 30.00
VPM 5671185 56.00 71.00 18.50 VPM 8010032 80.00 100.00 32.00
VPM 5671225 56.00 71.00 22.50 VPM 8010040 80.00 100.00 40.00
VPM 567125 56.00 71.00 25.00 VPM 85100225 85.00 100.00 22.50
VPM 567620 56.00 76.00 20.00 VPM 8510540 85.00 105.00 40.00
VPM 5676225 56.00 76.00 22.50 VPM 90105225 90.00 105.00 22.50
VPM 567632 56.00 76.00 32.00 VPM 9010525 90.00 105.00 25.00
VPM 567639 56.00 76.00 39.00 VPM 9010527 90.00 105.00 27.00
VPM 6075225 60.00 75.00 22.50 VPM 9010533 90.00 105.00 33.00
VPM 607629 60.00 76.00 29.00 VPM 9011032 90.00 110.00 32.00
VPM 607727 60.00 77.00 27.00 VPM 9011040 90.00 110.00 40.00
VPM 608030 60.00 80.00 30.00 VPM 9011045 90.00 110.00 45.00
VPM 608037 60.00 80.00 37.00 VPM 95110225 95.00 110.00 22.50
VPM 6378225 63.00 78.00 22.50 VPM 10011530 100.00 115.00 30.00
VPM 637825 63.00 78.00 25.00 VPM 10011532 100.00 115.00 32.00
VPM 638329 63.00 83.00 29.00 VPM 10012030 100.00 120.00 30.00
VPM 638332 63.00 83.00 32.00 VPM 10012032 100.00 120.00 32.00
VPM 638337 63.00 83.00 37.00 VPM 10012040 100.00 120.00 40.00
VPM 638532 63.00 85.00 32.00 VPM 10012535 100.00 125.00 35.00
VPM 657721 65.00 77.00 21.00 VPM 10012537 100.00 125.00 37.00
VPM 6580225 65.00 80.00 22.50 VPM 10012540 100.00 125.00 40.00
VPM 658029 65.00 80.00 29.00 VPM 10013032 100.00 130.00 32.00
VPM 658529 65.00 85.00 29.00 VPM 10413037 104.00 130.00 37.00
VPM 658532 65.00 85.00 32.00 VPM 10512025 105.00 120.00 25.00
VPM 658535 65.00 85.00 35.00 VPM 10512030 105.00 120.00 30.00
VPM 658540 65.00 85.00 40.00 VPM 10513040 105.00 130.00 40.00
VPM 7085225 70.00 85.00 22.50 VPM 11012521 110.00 125.00 21.00
VPM 708525 70.00 85.00 25.00 VPM 11012530 110.00 125.00 30.00
Sets
VPM 11013030 110.00 130.00 30.00 VPM 16019033 160.00 190.00 33.00
VPM 11013040 110.00 130.00 40.00 VPM 16019047 160.00 190.00 47.00
VPM 11013540 110.00 135.00 40.00 VPM 16019050 160.00 190.00 50.00
VPM 11513030 115.00 130.00 30.00 VPM 16019060 160.00 190.00 60.00
VPM 11514038 115.00 140.00 38.00 VPM 16019552 160.00 195.00 52.00
VPM 11514046 115.00 140.00 46.00 VPM 165195505 165.00 195.00 50.50
VPM 12013532 120.00 135.00 32.00 VPM 170195375 170.00 195.00 37.50
VPM 12014025 120.00 140.00 25.00 VPM 17020045 170.00 200.00 45.00
VPM 12014030 120.00 140.00 30.00 VPM 17020060 170.00 200.00 60.00
VPM 12014040 120.00 140.00 40.00 VPM 17520042 175.00 200.00 42.00
VPM 12014546 120.00 145.00 46.00 VPM 18020040 180.00 200.00 40.00
VPM 12015044 120.00 150.00 44.00 VPM 18020540 180.00 205.00 40.00
VPM 12514030 125.00 140.00 30.00 VPM 18021033 180.00 210.00 33.00
VPM 12514034 125.00 140.00 34.00 VPM 18021050 180.00 210.00 50.00
VPM 12514532 125.00 145.00 32.00 VPM 18021060 180.00 210.00 60.00
VPM 12515034 125.00 150.00 34.00 VPM 18521024 185.00 210.00 24.00
VPM 12515040 125.00 150.00 40.00 VPM 19022045 190.00 220.00 45.00
VPM 12515046 125.00 150.00 46.00 VPM 190220505 190.00 220.00 50.50
VPM 13015040 130.00 150.00 40.00 VPM 19022060 190.00 220.00 60.00
VPM 13015546 130.00 155.00 46.00 VPM 19522547 195.00 225.00 47.00
VPM 130160415 130.00 160.00 41.50 VPM 20022040 200.00 220.00 40.00
VPM 14015534 140.00 155.00 34.00 VPM 20022540 200.00 225.00 40.00
VPM 140160285 140.00 160.00 28.50 VPM 20023033 200.00 230.00 33.00
VPM 14016032 140.00 160.00 32.00 VPM 200230375 200.00 230.00 37.50
VPM 14016533 140.00 165.00 33.00 VPM 20023045 200.00 230.00 45.00
VPM 14016540 140.00 165.00 40.00 VPM 20023048 200.00 230.00 48.00
VPM 14016546 140.00 165.00 46.00 VPM 20023050 200.00 230.00 50.00
VPM 14017039 140.00 170.00 39.00 VPM 20023060 200.00 230.00 60.00
VPM 14017046 140.00 170.00 46.00 VPM 205225195 205.00 225.00 19.50
VPM14517849 145.00 178.00 49.00 VPM 21024060 210.00 240.00 60.00
VPM 15016526 150.00 165.00 26.00 VPM 220250325 220.00 250.00 32.50
VPM 15017025 150.00 170.00 25.00 VPM 220250475 220.00 250.00 47.50
VPM 15017040 150.00 170.00 40.00 VPM 22025050 220.00 250.00 50.00
VPM 150180305 150.00 180.00 30.50 VPM 22025060 220.00 250.00 60.00
VPM 15018040 150.00 180.00 40.00 VPM 22025066 220.00 250.00 66.00
VPM 15018046 150.00 180.00 46.00 VPM 22425433 224.00 254.00 33.00
VPM 15018060 150.00 180.00 60.00 VPM 22525533 225.00 255.00 33.00
VPM 16018032 160.00 180.00 32.00 VPM 22525545 225.00 255.00 45.00
VPM 16018040 160.00 180.00 40.00 VPM 22525560 225.00 255.00 60.00
VPM 16018540 160.00 185.00 40.00 VPM 22526537 225.00 265.00 37.00
Vee Packing
VPM 230260525 230.00 260.00 52.50 VPM 31034060 310.00 340.00 60.00
VPM 23026060 230.00 260.00 60.00 VPM 31035080 310.00 350.00 80.00
VPM 23026065 230.00 260.00 65.00 VPM 32035060 320.00 350.00 60.00
VPM 24027045 240.00 270.00 45.00 VPM 32036060 320.00 360.00 60.00
VPM 240270485 240.00 270.00 48.50 VPM 32036063 320.00 360.00 63.00
VPM 24027060 240.00 270.00 60.00 VPM 32036080 320.00 360.00 80.00
VPM 24027064 240.00 270.00 64.00 VPM 32036555 320.00 365.00 55.00
VPM 25028032 250.00 280.00 32.00 VPM 33036060 330.00 360.00 60.00
VPM 25028033 250.00 280.00 33.00 VPM 33037080 330.00 370.00 80.00
VPM 25028045 250.00 280.00 45.00 VPM 34037060 340.00 370.00 60.00
VPM 25028050 250.00 280.00 50.00 VPM 34038054 340.00 380.00 54.00
VPM 25028060 250.00 280.00 60.00 VPM 34038060 340.00 380.00 60.00
VPM26029049 260.00 290.00 49.00 VPM 34038080 340.00 380.00 80.00
VPM 26029060 260.00 290.00 60.00 VPM 35038060 350.00 380.00 60.00
VPM 27030030 270.00 300.00 30.00 VPM 35039060 350.00 390.00 60.00
VPM 270300325 270.00 300.00 32.50 VPM 35039080 350.00 390.00 80.00
VPM 270300375 270.00 300.00 37.50 VPM 36039047 360.00 390.00 47.00
VPM 27030060 270.00 300.00 60.00 VPM 36039060 360.00 390.00 60.00
VPM 27030070 270.00 300.00 70.00 VPM 36040060 360.00 400.00 60.00
VPM 28031050 280.00 310.00 50.00 VPM 36040063 360.00 400.00 63.00
VPM 28031060 280.00 310.00 60.00 VPM 36040080 360.00 400.00 80.00
VPM 280315385 280.00 315.00 38.50 VPM 36940045 369.00 400.00 45.00
VPM 28031545 280.00 315.00 45.00 VPM 400430525 400.00 430.00 52.50
VPM 28032080 280.00 320.00 80.00 VPM 40045065 400.00 450.00 65.00
VPM 29032060 290.00 320.00 60.00 VPM 45051070 450.00 510.00 70.00
VPM 29033080 290.00 330.00 80.00 VPM 46050060 460.00 500.00 60.00
VPM 30033060 300.00 330.00 60.00 VPM 46350055 463.00 500.00 55.00
VPM 30034080 300.00 340.00 80.00 VPM 50053580 500.00 535.00 80.00
VPM 31033030 310.00 330.00 30.00 VPM 57061080 570.00 610.00 80.00
VPM 31033040 310.00 330.00 40.00
Product Description:
Oil seals are used to seal fluids on rotating shafts at various speeds. Common oil seal applications include: gear boxes,
electric motors, and pumps. Oil seals for use on external rotation applications are available upon request.
Part Numbers:
___ ___ ___ - ___ ___ ___ ___ ___ ___ ___ ___ ___ ___
Example: OSV 30457DL - Double Lip Fluorocarbon Oil Seal - 30.00 mm I.D., 45.00 mm O.D., 7.00 mm Height
Oil Seals
O.D. I.D.
Part Number I.D. O.D. Width Part Number I.D. O.D. Width
OS 4116 4.00 11.00 6.00 OS 10197* 10.00 19.00 7.00
OS 5187DL 5.00 18.00 7.00 OS 10205DL 10.00 20.00 5.00
OS 5195DL 5.00 19.00 5.00 OS 10207DL 10.00 20.00 7.00
OS 6167 6.00 16.00 7.00 OS 10226DL 10.00 22.00 6.00
OS 6197 6.00 19.00 7.00 OS 10227 10.00 22.00 7.00
OS 6227DL 6.00 22.00 7.00 OS 10227DL 10.00 22.00 7.00
OS 7167 7.00 16.00 7.00 OS 10247 10.00 24.00 7.00
OS 7227 7.00 22.00 7.00 OS 10257DL 10.00 25.00 7.00
OS 8144 8.00 14.00 4.00 OS 10267 10.00 26.00 7.00
OS 8155 8.00 15.00 5.00 OS 10307 10.00 30.00 7.00
OS 8167 8.00 16.00 7.00 OS 103010 10.00 30.00 10.00
OS 8167DL 8.00 16.00 7.00 OS 11227 11.00 22.00 7.00
OS 8185 8.00 18.00 5.00 OS 11307 11.00 30.00 7.00
OS 8186 8.00 18.00 6.00 OS 12195 12.00 19.00 5.00
OS 8205DL 8.00 20.00 5.00 OS 12205DL 12.00 20.00 5.00
OS 8216DL 8.00 21.00 6.00 OS 12207DL 12.00 20.00 7.00
OS 8227* 8.00 22.00 7.00 OS 12225* 12.00 22.00 5.00
OS 8247 8.00 24.00 7.00 OS 12227DL 12.00 22.00 7.00
OS 8258DL 8.00 25.00 8.00 OS 12247DL 12.00 24.00 7.00
OS 8307 8.00 30.00 7.00 OS 12257DL 12.00 25.00 7.00
OS 9187 9.00 18.00 7.00 OS 12258 12.00 25.00 8.00
OS 9227 9.00 22.00 7.00 OS 12266 12.00 26.00 6.00
OS 9247 9.00 24.00 7.00 OS 12287* 12.00 28.00 7.00
OS 9267 9.00 26.00 7.00 OS 12307DL 12.00 30.00 7.00
OS 10164 10.00 16.00 4.00 OS 123010 12.00 30.00 10.00
OS 10185 10.00 18.00 5.00 OS 12327* 12.00 32.00 7.00
OS 10186 10.00 18.00 6.00 OS 13225 13.00 22.00 5.00
Nitrile
* Available in single and double lip (DL) styles.
Part Number I.D. O.D. Width Part Number I.D. O.D. Width
OS 13257DL 13.00 25.00 7.00 OS 17287* 17.00 28.00 7.00
OS 13265 13.00 26.00 5.00 OS 17307* 17.00 30.00 7.00
Oil Seals
Part Number I.D. O.D. Width Part Number I.D. O.D. Width
OS 20377DL 20.00 37.00 7.00 OS 24407 24.00 40.00 7.00
OS 20387* 20.00 38.00 7.00 OS 24407DL 24.00 40.00 7.00
Oil Seals
OS 20388DL 20.00 38.00 8.00 OS 24408DL 24.00 40.00 8.00
OS 20407* 20.00 40.00 7.00 OS 24428DL 24.00 42.00 8.00
OS 20408 20.00 40.00 8.00 OS 244210 24.00 42.00 10.00
OS 204010* 20.00 40.00 10.00 OS 24477 24.00 47.00 7.00
OS 20427* 20.00 42.00 7.00 OS 24477DL 24.00 47.00 7.00
OS 20458DL 20.00 45.00 8.00 OS 244710 24.00 47.00 10.00
OS 204510 20.00 45.00 10.00 OS 244710DL 24.00 47.00 10.00
OS 20477* 20.00 47.00 7.00 OS 24527DL 24.00 52.00 7.00
OS 204710 20.00 47.00 10.00 OS 25326 25.00 32.00 6.00
OS 20527* 20.00 52.00 7.00 OS 25326DL 25.00 32.00 6.00
OS 205210 20.00 52.00 10.00 OS 25327 25.00 32.00 7.00
OS 22315 22.00 31.00 5.00 OS 25336 25.00 33.00 6.00
OS 22325 22.00 32.00 5.00 OS 25355DL 25.00 35.00 5.00
OS 22327* 22.00 32.00 7.00 OS 25356DL 25.00 35.00 6.00
OS 22355* 22.00 35.00 5.00 OS 25357 25.00 35.00 7.00
OS 22357* 22.00 35.00 7.00 OS 25357DL 25.00 35.00 7.00
OS 22358DL 22.00 35.00 8.00 OS 253510 25.00 35.00 10.00
OS 22377* 22.00 37.00 7.00 OS 25367 25.00 36.00 7.00
OS 22387 22.00 38.00 7.00 OS 25367DL 25.00 36.00 7.00
OS 22388* 22.00 38.00 8.00 OS 25376DL 25.00 37.00 6.00
OS 22407* 22.00 40.00 7.00 OS 25377 25.00 37.00 7.00
OS 22427* 22.00 42.00 7.00 OS 25377DL 25.00 37.00 7.00
OS 224210 22.00 42.00 10.00 OS 25387 25.00 38.00 7.00
OS 22477 22.00 47.00 7.00 OS 25387DL 25.00 38.00 7.00
OS 224710 22.00 47.00 10.00 OS 25399 25.00 39.00 9.00
OS 224810 22.00 48.00 10.00 OS 25407* 25.00 40.00 7.00
OS 225010 22.00 50.00 10.00 OS 25408DL 25.00 40.00 8.00
OS 225210DL 22.00 52.00 10.00 OS 254010 25.00 40.00 10.00
OS 23357DL 23.00 35.00 7.00 OS 25425DL 25.00 42.00 5.00
OS 23406DL 23.00 40.00 6.00 OS 25427* 25.00 42.00 7.00
OS 234010 23.00 40.00 10.00 OS 25428* 25.00 42.00 8.00
OS 234810DL 23.00 48.00 10.00 OS 254210DL 25.00 42.00 10.00
OS 24324 24.00 32.00 4.00 OS 25457 25.00 45.00 7.00
OS 24357 24.00 35.00 7.00 OS 25458DL 25.00 45.00 8.00
OS 24358DL 24.00 35.00 8.00 OS 254510DL 25.00 45.00 10.00
OS 24366 24.00 36.00 6.00 OS 25467* 25.00 46.00 7.00
OS 24367DL 24.00 36.00 7.00 OS 25477* 25.00 47.00 7.00
OS 24369 24.00 36.00 9.00 OS 254710DL 25.00 47.00 10.00
OS 24377 24.00 37.00 7.00 OS 25488DL 25.00 48.00 8.00
Nitrile
* Available in single and double lip (DL) styles.
Part Number I.D. O.D. Width Part Number I.D. O.D. Width
OS 25527* 25.00 52.00 7.00 OS 30385DL 30.00 38.00 5.00
OS 255210* 25.00 52.00 10.00 OS 30405 30.00 40.00 5.00
Oil Seals
Part Number I.D. O.D. Width Part Number I.D. O.D. Width
OS 32527 * 32.00 52.00 7.00 OS356210DL 35.00 62.00 10.00
OS 325210 32.00 52.00 10.00 OS356212DL 35.00 62.00 12.00
Oil Seals
OS 325510 32.00 55.00 10.00 OS356510* 35.00 65.00 10.00
OS 325610DL 32.00 56.00 10.00 OS35677 35.00 67.00 7.00
OS 326210DL 32.00 62.00 10.00 OS356810 35.00 68.00 10.00
OS 33457 33.00 45.00 7.00 OS35727* 35.00 72.00 7.00
OS 33508 33.00 50.00 8.00 OS357210DL 35.00 72.00 10.00
OS 335010 33.00 50.00 10.00 OS357212* 35.00 72.00 12.00
OS 335210 33.00 52.00 10.00 OS358010 35.00 80.00 10.00
OS 34457 34.00 45.00 7.00 OS36477 36.00 47.00 7.00
OS 344610 34.00 46.00 10.00 OS36507* 36.00 50.00 7.00
OS 34488 * 34.00 48.00 8.00 OS36527* 36.00 52.00 7.00
OS 345010 34.00 50.00 10.00 OS365610 36.00 56.00 10.00
OS 34528 34.00 52.00 8.00 OS365810DL 36.00 58.00 10.00
OS 346210 34.00 62.00 10.00 OS36627DL 36.00 62.00 7.00
OS 347210 34.00 72.00 10.00 OS366210 36.00 62.00 10.00
OS 35456 35.00 45.00 6.00 OS27377 37.00 37.00 7.00
OS 35457DL 35.00 45.00 7.00 OS38507* 38.00 50.00 7.00
OS 35477 * 35.00 47.00 7.00 OS38508DL 38.00 50.00 8.00
OS 354710 * 35.00 47.00 10.00 OS385010DL 38.00 50.00 10.00
OS 35488 * 35.00 48.00 8.00 OS38527* 38.00 52.00 7.00
OS 35496DL 35.00 49.00 6.00 OS38528 38.00 52.00 8.00
OS 35507 * 35.00 50.00 7.00 OS385210 38.00 52.00 10.00
OS 35508DL 35.00 50.00 8.00 OS385410 38.00 54.00 10.00
OS 355010 * 35.00 50.00 10.00 OS38557 38.00 55.00 7.00
OS 35526DL 35.00 52.00 6.00 OS38558DL 38.00 55.00 8.00
OS 35527 * 35.00 52.00 7.00 OS385510DL 38.00 55.00 10.00
OS 35528DL 35.00 52.00 8.00 OS385612 38.00 56.00 12.00
OS 355210 * 35.00 52.00 10.00 OS38587DL 38.00 58.00 7.00
OS 35548DL 35.00 54.00 8.00 OS385810DL 38.00 58.00 10.00
OS 35558 * 35.00 55.00 8.00 OS385811DL 38.00 58.00 11.00
OS 355510 * 35.00 55.00 10.00 OS38608DL 38.00 60.00 8.00
OS 355511DL 35.00 55.00 11.00 OS386010 38.00 60.00 10.00
OS 355512 35.00 55.00 12.00 OS38627 38.00 62.00 7.00
OS 355610DL 35.00 56.00 10.00 OS386210 38.00 62.00 10.00
OS 355612DL 35.00 56.00 12.00 OS386412 38.00 64.00 12.00
OS 35588DL 35.00 58.00 8.00 OS386510 38.00 65.00 10.00
OS 355810 35.00 58.00 10.00 OS387210 38.00 72.00 10.00
OS 356010 35.00 60.00 10.00 OS40507DL 40.00 50.00 7.00
OS 35627DL 35.00 62.00 7.00 OS40526 40.00 52.00 6.00
OS 35628DL 35.00 62.00 8.00 OS40527* 40.00 52.00 7.00
Nitrile
* Available in single and double lip (DL) styles.
Part Number I.D. O.D. Width Part Number I.D. O.D. Width
OS 405210DL 40.00 52.00 10.00 OS 427010 42.00 70.00 10.00
OS 40557 * 40.00 55.00 7.00 OS 427210DL 42.00 72.00 10.00
Oil Seals
Part Number I.D. O.D. Width Part Number I.D. O.D. Width
OS 46708DL 46.00 70.00 8.00 OS 508010* 50.00 80.00 10.00
OS 468010 46.00 80.00 10.00 OS 508013DL 50.00 80.00 13.00
Oil Seals
OS 47627DL 47.00 62.00 7.00 OS50858 50.00 85.00 8.00
OS 47658 47.00 65.00 8.00 OS 50908DL 50.00 90.00 8.00
OS 48628* 48.00 62.00 8.00 OS 509010* 50.00 90.00 10.00
OS 486210DL 48.00 62.00 10.00 OS 5011010DL 50.00 110.00 10.00
OS 48659DL 48.00 65.00 9.00 OS 52628DL 52.00 62.00 8.00
OS 486510* 48.00 65.00 10.00 OS 52688* 52.00 68.00 8.00
OS 48688DL 48.00 68.00 8.00 OS 52728DL 52.00 72.00 8.00
OS 486810DL 48.00 68.00 10.00 OS 527210* 52.00 72.00 10.00
OS 486812 48.00 68.00 12.00 OS 527212DL 52.00 72.00 12.00
OS 48709DL 48.00 70.00 9.00 OS 527512 52.00 75.00 12.00
OS 487010 48.00 70.00 10.00 OS 528510DL 52.00 85.00 10.00
OS 487012* 48.00 70.00 12.00 OS 53655DL 53.00 65.00 5.00
OS 48727* 48.00 72.00 7.00 OS 536810 53.00 68.00 10.00
OS 48728 48.00 72.00 8.00 OS 547010 54.00 70.00 10.00
OS 487210* 48.00 72.00 10.00 OS 547210DL 54.00 72.00 10.00
OS 487212* 48.00 72.00 12.00 OS 549013 54.00 90.00 13.00
OS 488010 48.00 80.00 10.00 OS 55688* 55.00 68.00 8.00
OS 489010* 48.00 90.00 10.00 OS 55708* 55.00 70.00 8.00
OS 489013DL 48.00 90.00 13.00 OS 557010DL 55.00 70.00 10.00
OS 50584 50.00 58.00 4.00 OS 55728* 55.00 72.00 8.00
OS 506010 50.00 60.00 10.00 OS 557210* 55.00 72.00 10.00
OS 50627* 50.00 62.00 7.00 OS 55758DL 55.00 75.00 8.00
OS 506210 50.00 62.00 10.00 OS 557510 55.00 75.00 10.00
OS 506410DL 50.00 64.00 10.00 OS 557512DL 55.00 75.00 12.00
OS 50657 50.00 65.00 7.00 OS 557612DL 55.00 76.00 12.00
OS 50658* 50.00 65.00 8.00 OS 55788 55.00 78.00 8.00
OS 50688* 50.00 68.00 8.00 OS 557810 55.00 78.00 10.00
OS 50689DL 50.00 68.00 9.00 OS 557812* 55.00 78.00 12.00
OS 506810 50.00 68.00 10.00 OS 55808* 55.00 80.00 8.00
OS 506810DL 50.00 68.00 10.00 OS 558010* 55.00 80.00 10.00
OS 50708DL 50.00 70.00 8.00 OS 558013 55.00 80.00 13.00
OS 507010* 50.00 70.00 10.00 OS 558210DL 55.00 82.00 10.00
OS 50728* 50.00 72.00 8.00 OS 55858* 55.00 85.00 8.00
OS 50729DL 50.00 72.00 9.00 OS 558510DL 55.00 85.00 10.00
OS 507210DL 50.00 72.00 10.00 OS 558512DL 55.00 85.00 12.00
OS 507212* 50.00 72.00 12.00 OS 559010DL 55.00 90.00 10.00
OS 507510DL 50.00 75.00 10.00 OS 56708 56.00 70.00 8.00
OS 507512 50.00 75.00 12.00 OS 56728 56.00 72.00 8.00
OS 50808* 50.00 80.00 8.00 OS 56808 56.00 80.00 8.00
Nitrile
* Available in single and double lip (DL) styles.
Part Number I.D. O.D. Width Part Number I.D. O.D. Width
OS 56858 56.00 85.00 8.00 OS 64808 64.00 80.00 8.00
OS 58728 58.00 72.00 8.00 OS 65758DL 65.00 75.00 8.00
Oil Seals
Part Number I.D. O.D. Width Part Number I.D. O.D. Width
OS 75908DL 75.00 90.00 8.00 OS 8515012 85.00 150.00 12.00
OS 759010* 75.00 90.00 10.00 OS 8811010 88.00 110.00 10.00
Oil Seals
OS 75958DL 75.00 95.00 8.00 OS 8811012 88.00 110.00 12.00
OS 759510* 75.00 95.00 10.00 OS 9010513 90.00 105.00 13.00
OS 759512 75.00 95.00 12.00 OS 901108 90.00 110.00 8.00
OS 759512DL 75.00 95.00 12.00 OS 9011012DL 90.00 110.00 12.00
OS 7510010* 75.00 100.00 10.00 OS 9011013* 90.00 110.00 13.00
OS 7510012* 75.00 100.00 12.00 OS 901159 90.00 115.00 9.00
OS 7510013* 75.00 100.00 13.00 OS 9011513* 90.00 115.00 13.00
OS 7510513DL 75.00 105.00 13.00 OS 9012012* 90.00 120.00 12.00
OS 7511012 75.00 110.00 12.00 OS 9012013DL 90.00 120.00 13.00
OS 7511013DL 75.00 110.00 13.00 OS 9012512DL 90.00 125.00 12.00
OS 7511510 75.00 115.00 10.00 OS 9012513 90.00 125.00 13.00
OS 7511512 75.00 115.00 12.00 OS 9013013* 90.00 130.00 13.00
OS 7512012 75.00 120.00 12.00 OS 9511010DL 95.00 110.00 10.00
OS 769510 76.00 95.00 10.00 OS 9511512DL 95.00 115.00 12.00
OS 7810010 78.00 100.00 10.00 OS 9511513DL 95.00 115.00 13.00
OS 7810513 78.00 105.00 13.00 OS 9512012 95.00 120.00 12.00
OS 80958 80.00 95.00 8.00 OS 9512012DL 95.00 120.00 12.00
OS 801007DL 80.00 100.00 7.00 OS 9512013* 95.00 120.00 13.00
OS 8010010* 80.00 100.00 10.00 OS 9512512* 95.00 125.00 12.00
OS 8010012DL 80.00 100.00 12.00 OS 9512513 95.00 125.00 13.00
OS 8010013* 80.00 100.00 13.00 OS 9513012* 95.00 130.00 12.00
OS 8010510 80.00 105.00 10.00 OS 9513013* 95.00 130.00 13.00
OS 8010513DL 80.00 105.00 13.00 OS 9513513 95.00 135.00 13.00
OS 8011010* 80.00 110.00 10.00 OS 9811512DL 98.00 115.00 12.00
OS 8011012 80.00 110.00 12.00 OS 9812513 98.00 125.00 13.00
OS 8011510 80.00 115.00 10.00 OS 1001159 100.00 115.00 9.00
OS 8012013DL 80.00 120.00 13.00 OS 10012012* 100.00 120.00 12.00
OS 8410013 84.00 100.00 13.00 OS 10012013 100.00 120.00 13.00
OS 851009 85.00 100.00 9.00 OS 10012512* 100.00 125.00 12.00
OS 8510012* 85.00 100.00 12.00 OS 10012513DL 100.00 125.00 13.00
OS 8510510* 85.00 105.00 10.00 OS 10012515 100.00 125.00 15.00
OS 8510512 85.00 105.00 12.00 OS 10012713 100.00 127.00 13.00
OS 8510513 85.00 105.00 13.00 OS 10013010 100.00 130.00 10.00
OS 8511010 85.00 110.00 10.00 OS 10013012* 100.00 130.00 12.00
OS 8511012* 85.00 110.00 12.00 OS 10014012 100.00 140.00 12.00
OS 8511013* 85.00 110.00 13.00 OS 10015012 100.00 150.00 12.00
OS 8512012* 85.00 120.00 12.00 OS 10015013 100.00 150.00 13.00
OS 8513012* 85.00 130.00 12.00 OS 10213513 102.00 135.00 13.00
OS 8514012DL 85.00 140.00 12.00 OS 10512510 105.00 125.00 10.00
Nitrile
* Available in single and double lip (DL) styles.
Part Number I.D. O.D. Width Part Number I.D. O.D. Width
OS 10512513DL 105.00 125.00 13.00 OS 12815013 128.00 150.00 13.00
OS 10513012* 105.00 130.00 12.00 OS 13015010DL 130.00 150.00 10.00
Oil Seals
Part Number I.D. O.D. Width Part Number I.D. O.D. Width
OS 16519013 165.00 190.00 13.00 OS 20025015 200.00 250.00 15.00
OS 16519015DL 165.00 190.00 15.00 OS 20523015 205.00 230.00 15.00
Oil Seals
OS 16520015 165.00 200.00 15.00 OS 21024015* 210.00 240.00 15.00
OS 17019013 170.00 190.00 13.00 OS 21025015 210.00 250.00 15.00
OS 17020012 170.00 200.00 12.00 OS 21524012 215.00 240.00 12.00
OS 17020015* 170.00 200.00 15.00 OS 21525016 215.00 250.00 16.00
OS 17021015DL 170.00 210.00 15.00 OS 22025014 220.00 250.00 14.00
OS 17520015 175.00 200.00 15.00 OS 22025015* 220.00 250.00 15.00
OS 18020015* 180.00 200.00 15.00 OS 22025516 220.00 255.00 16.00
OS 18020016DL 180.00 200.00 16.00 OS 22026015 220.00 260.00 15.00
OS 18021015* 180.00 210.00 15.00 OS 23026015* 230.00 260.00 15.00
OS 18021515DL 180.00 215.00 15.00 OS 23026020DL 230.00 260.00 20.00
OS 18021516 180.00 215.00 16.00 OS 23027015 230.00 270.00 15.00
OS 18022015* 180.00 220.00 15.00 OS 23028015 230.00 280.00 15.00
OS 18521013* 185.00 210.00 13.00 OS 24027015* 240.00 270.00 15.00
OS 18521515 185.00 215.00 15.00 OS 24028015 240.00 280.00 15.00
OS 18521516 185.00 215.00 16.00 OS 25028015 250.00 280.00 15.00
OS 19021516DL 190.00 215.00 16.00 OS 25029016 250.00 290.00 16.00
OS 19022012 190.00 220.00 12.00 OS26030020 260.00 300.00 20.00
OS 19022015* 190.00 220.00 15.00 OS 27031015 270.00 310.00 15.00
OS 19022016 190.00 220.00 16.00 OS 28032020* 280.00 320.00 20.00
OS 19022515* 190.00 225.00 15.00 OS 28532516 285.00 325.00 16.00
OS 19022516* 190.00 225.00 16.00 OS 29033018* 290.00 330.00 18.00
OS 19023015DL 190.00 230.00 15.00 OS 30034016 300.00 340.00 16.00
OS 20022515 200.00 225.00 15.00 OS 30034020DL 300.00 340.00 20.00
OS 20023013 200.00 230.00 13.00 OS 32036018DL 320.00 360.00 18.00
OS 20023015* 200.00 230.00 15.00 OS 40044020 400.00 440.00 20.00
OS 20024015 200.00 240.00 15.00 OS 42046020 420.00 460.00 20.00
Fluorocarbon
W
Oil Seals
I.D. O.D.
Oil Seals
OSV 254510 25.00 45.00 10.00 OSV 355610 35.00 56.00 10.00
OSV 25477* 25.00 47.00 7.00 OSV 35627DL 35.00 62.00 7.00
OSV 25507DL 25.00 50.00 7.00 OSV 35727DL 35.00 72.00 7.00
OSV 25527* 25.00 52.00 7.00 OSV 357210 35.00 72.00 10.00
OSV 26427DL 26.00 42.00 7.00 OSV 36507DL 36.00 50.00 7.00
OSV 26477DL 26.00 47.00 7.00 OSV 36527DL 36.00 52.00 7.00
OSV 28387* 28.00 38.00 7.00 OSV 38507* 38.00 50.00 7.00
OSV 28407 28.00 40.00 7.00 OSV 38527* 38.00 52.00 7.00
OSV 28458 28.00 45.00 8.00 OSV 38557DL 38.00 55.00 7.00
OSV 28477* 28.00 47.00 7.00 OSV 38607DL 38.00 60.00 7.00
OSV 28527DL 28.00 52.00 7.00 OSV 38627DL 38.00 62.00 7.00
OSV 30407* 30.00 40.00 7.00 OSV 40527* 40.00 52.00 7.00
OSV 30427* 30.00 42.00 7.00 OSV 40557* 40.00 55.00 7.00
OSV 30457DL 30.00 45.00 7.00 OSV 406010* 40.00 60.00 10.00
OSV 30458 30.00 45.00 8.00 OSV 40627* 40.00 62.00 7.00
OSV 30477* 30.00 47.00 7.00 OSV 406210* 40.00 62.00 10.00
OSV 30507DL 30.00 50.00 7.00 OSV 40727DL 40.00 72.00 7.00
OSV 30508 30.00 50.00 8.00 OSV 408010 40.00 80.00 10.00
OSV 305010 30.00 50.00 10.00 OSV 42557DL 42.00 55.00 7.00
OSV 30527* 30.00 52.00 7.00 OSV 42567 42.00 56.00 7.00
OSV 305510 30.00 55.00 10.00 OSV 42628* 42.00 62.00 8.00
OSV 30627* 30.00 62.00 7.00 OSV 42658 42.00 65.00 8.00
OSV 32427DL 32.00 42.00 7.00 OSV 42728DL 42.00 72.00 8.00
OSV 32457 32.00 45.00 7.00 OSV 44658DL 44.00 65.00 8.00
OSV 32477* 32.00 47.00 7.00 OSV 45524 45.00 52.00 4.00
OSV 32507DL 32.00 50.00 7.00 OSV 45608DL 45.00 60.00 8.00
OSV 32527* 32.00 52.00 7.00 OSV 45628* 45.00 62.00 8.00
OSV 326210 32.00 62.00 10.00 OSV 456212 45.00 62.00 12.00
OSV 35457* 35.00 45.00 7.00 OSV 45658* 45.00 65.00 8.00
OSV 35477* 35.00 47.00 7.00 OSV 456510DL 45.00 65.00 10.00
OSV 35487DL 35.00 48.00 7.00 OSV 45728* 45.00 72.00 8.00
OSV 35507* 35.00 50.00 7.00 OSV 458010 45.00 80.00 10.00
OSV 35508DL 35.00 50.00 8.00 OSV 459010DL 45.00 90.00 10.00
OSV 355010 35.00 50.00 10.00 OSV 48628* 48.00 62.00 8.00
OSV 35526DL 35.00 52.00 6.00 OSV 48658DL 48.00 65.00 8.00
OSV 35527* 35.00 52.00 7.00 OSV 48688DL 48.00 68.00 8.00
OSV 35528DL 35.00 52.00 8.00 OSV 486910 48.00 69.00 10.00
OSV 355210DL 35.00 52.00 10.00 OSV 48728DL 48.00 72.00 8.00
OSV 355410 35.00 54.00 10.00 OSV 48758 48.00 75.00 8.00
Fluorocarbon
* Available in single and double lip (DL) styles.
OSV 507010 50.00 70.00 10.00 OSV 7010010DL 70.00 100.00 10.00
OSV 50727DL 50.00 72.00 7.00 OSV 7011013 70.00 110.00 13.00
OSV 50728* 50.00 72.00 8.00 OSV 7210010DL 72.00 100.00 10.00
OSV 507510* 50.00 75.00 10.00 OSV 759010DL 75.00 90.00 10.00
OSV 50808DL 50.00 80.00 8.00 OSV 759510* 75.00 95.00 10.00
OSV 52688* 52.00 68.00 8.00 OSV 759512 75.00 95.00 12.00
OSV 52728* 52.00 72.00 8.00 OSV 7510010* 75.00 100.00 10.00
OSV 55708 55.00 70.00 8.00 OSV 7512512DL 75.00 125.00 12.00
OSV 557010DL 55.00 70.00 10.00 OSV 7810010* 78.00 100.00 10.00
OSV 55728* 55.00 72.00 8.00 OSV 8010010* 80.00 100.00 10.00
OSV 557210DL 55.00 72.00 10.00 OSV 8010012 80.00 100.00 12.00
OSV 55758* 55.00 75.00 8.00 OSV 8010013* 80.00 100.00 13.00
OSV 557810 55.00 78.00 10.00 OSV 8011010DL 80.00 110.00 10.00
OSV 55808DL 55.00 80.00 8.00 OSV 8510512DL 85.00 105.00 12.00
OSV 558010DL 55.00 80.00 10.00 OSV 8511012DL 85.00 110.00 12.00
OSV 558510DL 55.00 85.00 10.00 OSV 8511013 85.00 110.00 13.00
OSV 559010 55.00 90.00 10.00 OSV 8512012DL 85.00 120.00 12.00
OSV 56708 56.00 70.00 8.00 OSV 9010013DL 90.00 100.00 13.00
OSV 56808DL 56.00 80.00 8.00 OSV 9011012DL 90.00 110.00 12.00
OSV 58728 58.00 72.00 8.00 OSV 9011512* 90.00 115.00 12.00
OSV 60758* 60.00 75.00 8.00 OSV 9011513 90.00 115.00 13.00
OSV 60808* 60.00 80.00 8.00 OSV 9012012 90.00 120.00 12.00
OSV 608010* 60.00 80.00 10.00 OSV 9212013 92.00 120.00 13.00
OSV 60858DL 60.00 85.00 8.00 OSV 9511010 95.00 110.00 10.00
OSV 608510DL 60.00 85.00 10.00 OSV 9511513DL 95.00 115.00 13.00
OSV 60908 60.00 90.00 8.00 OSV 9512012DL 95.00 120.00 12.00
OSV 628510* 62.00 85.00 10.00 OSV 9512013DL 95.00 120.00 13.00
OSV 629010 62.00 90.00 10.00 OSV 9512512DL 95.00 125.00 12.00
OSV 638510* 63.00 85.00 10.00 OSV 10012012* 100.00 120.00 12.00
OSV 639010DL 63.00 90.00 10.00 OSV 10012512* 100.00 125.00 12.00
OSV 658510* 65.00 85.00 10.00 OSV 10013012* 100.00 130.00 12.00
OSV 658512 65.00 85.00 12.00 OSV 10014013 100.00 140.00 13.00
OSV 658513DL 65.00 85.00 13.00 OSV 10512513DL 105.00 125.00 13.00
OSV 659010* 65.00 90.00 10.00 OSV 10513012* 105.00 130.00 12.00
OSV 6510010DL 65.00 100.00 10.00 OSV 10514012 105.00 140.00 12.00
OSV 689010* 68.00 90.00 10.00 OSV 1101308 110.00 130.00 8.00
OSV 70858 70.00 85.00 8.00 OSV 11013012* 110.00 130.00 12.00
OSV 708810DL 70.00 88.00 10.00 OSV 11014012DL 110.00 140.00 12.00
OSV 709010* 70.00 90.00 10.00 OSV 11514012* 115.00 140.00 12.00
Oil Seals
OSV 14017012 140.00 170.00 12.00 OSV 24027015DL 240.00 270.00 15.00
OSV 14017013 140.00 170.00 13.00 OSV 25028015 250.00 280.00 15.00
OSV 14017015DL 140.00 170.00 15.00 OSV 36040018 360.00 400.00 18.00
OSV 14018015 140.00 180.00 15.00 OSV 42047020DL 420.00 470.00 20.00
OSV 14517515DL 145.00 175.00 15.00 OSV 11815012DL 118.00 150.00 12.00
OSV 15018012 150.00 180.00 12.00 OSV 12014013DL 120.00 140.00 13.00
OSV 15018015DL 150.00 180.00 15.00 OSV 12015012* 120.00 150.00 12.00
OSV 16018010DL 160.00 180.00 10.00 OSV 12015013* 120.00 150.00 13.00
OSV 16018510 160.00 185.00 10.00 OSV 12016012DL 120.00 160.00 12.00
OSV 16019015DL 160.00 190.00 15.00 OSV 12514513 125.00 145.00 13.00
OSV 17020015DL 170.00 200.00 15.00 OSV 12515012* 125.00 150.00 12.00
OSV 17520515 175.00 205.00 15.00 OSV 12516012DL 125.00 160.00 12.00
OSV 18021015DL 180.00 210.00 15.00 OSV 13016012DL 130.00 160.00 12.00
OSV 18520510DL 185.00 205.00 10.00 OSV 13016015DL 130.00 160.00 15.00
OSV 18521013DL 185.00 210.00 13.00 OSV 13017012* 130.00 170.00 12.00
OSV 19022015 190.00 220.00 15.00 OSV 13516015DL 135.00 160.00 15.00
OSV 19023016DL 190.00 230.00 16.00 OSV 13516512 135.00 165.00 12.00
OSV 20023015DL 200.00 230.00 15.00 OSV 13517012 135.00 170.00 12.00
OSV 21024015 210.00 240.00 15.00
Additional sizes available upon request.
SA2 Style
W
Oil Seals
I.D. O.D.
Part Number I.D. O.D. Width Part Number I.D. O.D. Width
OS 173210SA2 17.00 32.00 10.00 OS 10014013SA2 100.00 140.00 13.00
OS 203510SA2 20.00 35.00 10.00 OS 10512513SA2 105.00 125.00 13.00
OS 234210SA2 23.00 42.00 10.00 OS 10513015SA2 105.00 130.00 15.00
OS 25409SA2 25.00 40.00 9.00 OS 11013012SA2 110.00 130.00 12.00
OS 264210SA2 26.00 42.00 10.00 OS 11013015SA2 110.00 130.00 15.00
OS 304610SA2 30.00 46.00 10.00 OS 12014013SA2 120.00 140.00 13.00
OS 355212SA2 35.00 52.00 12.00 OS 12015013SA2 120.00 150.00 13.00
OS 355610SA2 35.00 56.00 10.00 OS 12415015SA2 124.00 150.00 15.00
OS 407212SA2 40.00 72.00 12.00 OS 12515015SA2 125.00 150.00 15.00
OS 409012SA2 40.00 90.00 12.00 OS 13015010SA2 130.00 150.00 10.00
OS 506510SA2 50.00 65.00 10.00 OS 13015510SA2 130.00 155.00 10.00
OS 507010SA2 50.00 70.00 10.00 OS 13016015SA2 130.00 160.00 15.00
OS 508513SA2 50.00 85.00 13.00 OS 14016512SA2 140.00 165.00 12.00
OS 526812SA2 52.00 68.00 12.00 OS 14517515SA2 145.00 175.00 15.00
OS 548010SA2 54.00 80.00 10.00 OS 14817015SA2 148.00 170.00 15.00
OS 558010SA2 55.00 80.00 10.00 OS 15019015SA2 150.00 190.00 15.00
OS 558012SA2 55.00 80.00 12.00 OS 15518015SA2 155.00 180.00 15.00
OS 5510013SA2 55.00 100.00 13.00 OS 16020015SA2 160.00 200.00 15.00
OS 568010SA2 56.00 80.00 10.00 OS 16519015SA2 165.00 190.00 15.00
OS 587512SA2 58.00 75.00 12.00 OS 16820015SA2 168.00 200.00 15.00
OS 608013SA2 60.00 80.00 13.00 OS 17019015SA2 170.00 190.00 15.00
OS 6510013SA2 65.00 100.00 13.00 OS 18022016SA2 180.00 220.00 16.00
OS 709012SA2 70.00 90.00 12.00 OS 18521515SA2 185.00 215.00 15.00
OS 7010513SA2 70.00 105.00 13.00 OS 19023016SA2 190.00 230.00 16.00
OS 7510013SA2 75.00 100.00 13.00 OS 20023016SA2 200.00 230.00 16.00
OS 8010010SA2 80.00 100.00 10.00 OS 26028016SA2 260.00 280.00 16.00
OS 8011010SA2 80.00 110.00 10.00 OS 29033018SA2 290.00 330.00 18.00
OS 8510513SA2 85.00 105.00 13.00 OS 34038020SA2 340.00 380.00 20.00
OS 8512513SA2 85.00 125.00 13.00 OS 35039018SA2 350.00 390.00 18.00
OS 901159SA2 90.00 115.00 9.00 OS 44048020SA2 440.00 480.00 20.00
OS 9012013SA2 90.00 120.00 13.00 OS 50054020SA2 500.00 540.00 20.00
OS 10012513SA2 100.00 125.00 13.00 OS 71076020SA2 710.00 760.00 20.00
Oil Seals
O.D. I.D.
W
Oil Seals
I.D. O.D.
High pressure double lip Oil seal, rated at 145 PSI (10 Bar).
The BAB Oil seal is used in applications where back pressure
is above 5 PSI but not more than 145 PSI.
Oil Seals
O.D. I.D.
Metric Imperial
Garlock Ref. #
Part Number I.D. O.D. Width I.D. O.D. Width
OS 14017015L1M 140.00 170.00 15.00 5.512 6.693 0.591 53X-2990
OS 15017015L1M 150.00 170.00 15.00 5.906 6.693 0.591 53X-3121
OS 15018013L1M 150.00 180.00 13.00 5.906 7.087 0.512 53X-3124
OS 18022016L1M 180.00 220.00 16.00 7.087 8.661 0.630 53X-3075
OS 20024020L1M 200.00 240.00 20.00 7.874 9.449 0.787 53X-3013
OS 22026016L1M 220.00 260.00 16.00 8.661 10.236 0.630 53X-3074
OS 24028020L1M 240.00 280.00 20.00 9.449 11.024 0.787 53X-3015
OS 26030420L1M 260.00 304.00 20.00 10.236 11.969 0.787 53X-3076
OS 27531918L1M 275.00 319.00 18.00 10.827 12.559 0.709 53X-3078
OS 275319519L1M 275.00 319.50 19.00 10.827 12.579 0.748 53X-3096
OS 31035015L1M 310.00 350.00 18.00 12.205 13.780 0.709 53X-3115
OS 32036418L1M 320.00 364.00 18.00 12.598 14.331 0.709 53X-3079
OS 32036420L1M 320.00 364.00 20.00 12.598 14.331 0.787 53X-3080
OS 33037018L1M 330.00 370.00 18.00 12.992 14.567 0.709 53X-3007
OS 34038018L1M 340.00 380.00 18.00 13.386 14.961 0.709 53X-3036
OS 34038020L1M 340.00 380.00 20.00 13.386 14.961 0.787 53X-3116
OS 37039012L1M 370.00 390.00 12.00 14.567 15.354 0.472 53X-4105
OS 39043016L1M 390.00 430.00 16.00 15.354 16.929 0.630 53X-4616
OS 40044020L1M 400.00 440.00 20.00 15.748 17.323 0.787 53X-3038
OS 42046020L1M 420.00 460.00 20.00 16.535 18.110 0.787 53X-3010
OS 44048020L1M 440.00 480.00 20.00 17.323 18.898 0.787 53X-4192
OS 47052022L1M 470.00 520.00 22.00 18.504 20.472 0.866 53X-3029
OS 47053020L1M 470.00 530.00 20.00 18.504 20.866 0.787 53X-3062
OS 48553519L1M 485.00 535.00 19.00 19.094 21.063 0.748 53X-4220
OS 50055019L1M 500.00 550.00 19.00 19.685 21.654 0.748 53X-4232
OS 52057022L1M 520.00 570.00 22.00 20.472 22.441 0.866 53X-3027
OS 56061020L1M 560.00 610.00 20.00 22.047 24.016 0.787 53X-7266
OS 56560120L1M 565.00 601.00 20.00 22.244 23.661 0.787 53X-9995
OS 57063020L1M 570.00 630.00 20.00 22.441 24.803 0.787 53X-3061
OS 58062020L1M 580.00 620.00 20.00 22.835 24.409 0.787 53X-3053
OS 60064020L1M 600.00 640.00 20.00 23.622 25.197 0.787 53X-8624
L1M Style
Oil Seals
Metric Imperial
Garlock Ref. #
Part Number I.D. O.D. Width I.D. O.D. Width
OS 63067020L1M 630.00 670.00 20.00 24.803 26.378 0.787 53X-3020
OS 63069020L1M 630.00 690.00 20.00 24.803 27.165 0.787 53X-3059
OS 64068020L1M 640.00 680.00 20.00 25.197 26.772 0.787 53X-3019
OS 65071425L1M 650.00 714.00 25.00 25.591 28.110 0.984 53X-3016
OS 67072022L1M 670.00 720.00 22.00 26.378 28.346 0.866 53X-3081
OS 69073020L1M 690.00 730.00 20.00 27.165 28.740 0.787 53X-3054
OS 70076425L1M 700.00 764.00 25.00 27.559 30.079 0.984 53X-3089
OS 74077815L1M 740.00 778.00 15.00 29.134 30.630 0.591 53X-3072
OS 75081425L1M 750.00 814.00 25.00 29.528 32.047 0.984 53X-4629
OS 78084425L1M 780.00 844.00 25.00 30.709 33.228 0.984 53X-3032
OS 79085425L1M 790.00 854.00 25.00 31.102 33.622 0.984 53X-6666
OS 84090425L1M 840.00 904.00 25.00 33.071 35.591 0.984 53X-3034
OS 86092025L1M 860.00 920.00 25.00 33.858 36.220 0.984 53X-3055
OS 89095422L1M 890.00 954.00 22.00 35.039 37.559 0.866 53X-3077
OS 90595522L1M 905.00 955.00 22.00 35.630 37.598 0.866 53X-3065
OS 990104025L1M 990.00 1040.00 25.00 38.976 40.945 0.984 53X-9998
OS 1000106425L1M 1000.00 1064.00 25.00 39.370 41.890 0.984 53X-3093
OS 1030107025L1M 1030.00 1070.00 25.00 40.551 42.126 0.984 53X-3070
OS 1055110025L1M 1055.00 1100.00 25.00 41.535 43.307 0.984 53X-3012
OS 1105116022L1M 1105.00 1160.00 22.00 43.504 45.669 0.866 53X-4640
OS 1105116025L1M 1105.00 1160.00 25.00 43.504 45.669 0.984 53X-3018
OS 1350141525L1M 1350.00 1415.00 25.00 53.150 55.709 0.984 53X-3028
Additional sizes available in our imperial line. For information please visit page XXX.
Oil Seals
O.D. I.D.
Standard Material: Steel case with a stainless steel spring and a Nitrile lip.
The L2M seal is also available in Viton® and Silicone.
Metric Imperial
Garlock Ref. #
Part Number I.D. O.D. Width ID. O.D. Width
OS 18022016L2M 180.00 220.00 16.00 7.087 8.661 0.630 21238-64X-3075
OS 20024020L2M 200.00 240.00 20.00 7.874 9.449 0.787 21238-64X-3013
OS 22026016L2M 220.00 260.00 16.00 8.661 10.236 0.630 21238-64X-3074
OS 26030020L2M 260.00 300.00 20.00 10.236 11.811 0.787 21238-64X-5429
OS 26030420L2M 260.00 304.00 20.00 10.236 11.969 0.787 21238-64X-3076
OS 27531918L2M 275.00 319.00 18.00 10.827 12.559 0.709 21238-64X-3078
OS 27531919L2M 275.00 319.00 19.00 10.827 12.559 0.748 21238-64X-3096
OS 29033018L2M 290.00 330.00 18.00 11.417 12.992 0.709 21238-64X-3886
OS 32036418L2M 320.00 364.00 18.00 12.598 14.331 0.709 21238-64X-3079
OS 32036420L2M 320.00 364.00 20.00 12.598 14.331 0.787 21238-64X-3080
OS 33037018L2M 330.00 370.00 18.00 12.992 14.567 0.709 21238-64X-3007
OS 39043016L2M 390.00 430.00 16.00 15.354 16.929 0.630 21238-64X-4616
OS 40044020L2M 400.00 440.00 20.00 15.748 17.323 0.787 21238-64X-3038
OS 42046020L2M 420.00 460.00 20.00 16.535 18.110 0.787 21238-64X-3010
OS 44048020L2M 440.00 480.00 20.00 17.322 18.898 0.787 21238-64X-4192
OS 47052022L2M 470.00 520.00 22.00 18.504 20.472 0.866 21238-64X-3029
OS 52057022L2M 520.00 570.00 22.00 20.472 22.441 0.866 21238-64X-3027
OS 56061020L2M 560.00 610.00 20.00 22.047 24.016 0.787 21238-64X-7266
OS 56560120L2M 565.00 601.00 20.00 22.244 23.661 0.787 21238-64X-9995
OS 60064020L2M 600.00 640.00 20.00 23.622 25.197 0.787 21238-64X-8624
OS 63067020L2M 630.00 670.00 20.00 24.803 26.378 0.787 21238-64X-3020
OS 63069020L2M 630.00 690.00 20.00 24.803 27.165 0.787 21238-64X-3059
OS 64068020L2M 640.00 680.00 20.00 25.196 26.771 0.787 21238-64X-3019
OS 65071425L2M 650.00 714.00 25.00 25.590 28.110 0.984 21238-64X-3016
OS 67072022L2M 670.00 720.00 22.00 26.377 28.346 0.866 21238-64X-3081
OS 75081425L2M 750.00 814.00 25.00 29.528 32.047 0.984 21238-64X-4629
OS 76280015L2M 762.00 800.00 15.00 30.000 31.496 0.591 21238-64X-3048
OS 78084425L2M 780.00 844.00 25.00 30.709 33.228 0.984 21238-64X-3032
OS 79085425L2M 790.00 854.00 25.00 31.102 33.622 0.984 21238-64X-6666
OS 90595522L2M 905.00 955.00 22.00 35.630 37.598 0.866 21238-64X-3065
OS 99010425L2M 990.00 1040.00 25.00 38.976 40.945 0.984 21238-64X-9998
OS 1000106425L2M 1000.00 1064.00 25.00 39.370 41.890 0.984 21238-64X-3093
OS 1350141525L2M 1350.00 1415.00 25.00 53.150 55.709 0.984 21238-64X-3028
Product Description:
The VK end cap is a rubber-to-metal bonded cap commonly used as a plug or cap on gear boxes. End covers (caps) are
designed to fit directly on housing bores for rotary shaft lip seals. VK end caps are primarily stocked in Nitrile, however,
fluorocarbon VK end caps are available upon request.
Part Numbers:
VK - ___ ___ ___X___ ___
O.D. Height
O.D.
VK End Caps
Height
VA VS VL VE
Product Description:
The function of a V-seal is to exclude dirt, water or other aggressive media from entering bearing housings while also
retaining grease. The V-seal stretches over the shaft and assumes a tight interference fit. The V-seal rotates with the shaft
causing the lip to rotate against the housing or bearing. As the speed increases, friction decreases due to centripetal force.
Part Numbers:
V ___ ___ - ___ ___ ___
Dash Number
Blank - Nitrile
Style: V - Viton®
A, S, L, E
Example: VAV 100 - Viton® VA- style V-seal - 90 mm I.D., 102 mm O.D., 11 mm Height
V-Seals
E A F B C
VA Style
V-Seals
V-Seals
Seal Dimensions Housing Dimensions
A B C D E F G
Part Number Shaft Diameter I.D. O.D. Height I.D. O.D. Width
VA 1100 1065.00 - 1115.00 1000.00 1030.00 25.00 A + 10.00 A + 45.00 20.00 ± 4.00
VA 1150 1115.00 - 1165.00 1045.00 1075.00 25.00 A + 10.00 A + 45.00 20.00 ± 4.00
VA 1200 1165.00 - 1215.00 1090.00 1120.00 25.00 A + 10.00 A + 45.00 20.00 ± 4.00
VA 1250 1215.00 - 1270.00 1135.00 1165.00 25.00 A + 10.00 A + 45.00 20.00 ± 4.00
VA 1300 1270.00 - 1320.00 1180.00 1210.00 25.00 A + 10.00 A + 45.00 20.00 ± 4.00
VA 1350 1320.00 - 1370.00 1225.00 1255.00 25.00 A + 10.00 A + 45.00 20.00 ± 4.00
VA 1400 1370.00 - 1420.00 1270.00 1300.00 25.00 A + 10.00 A + 45.00 20.00 ± 4.00
VA 1450 1420.00 - 1470.00 1315.00 1345.00 25.00 A + 10.00 A + 45.00 20.00 ± 4.00
VA 1500 1470.00 - 1520.00 1360.00 1390.00 25.00 A + 10.00 A + 45.00 20.00 ± 4.00
VA 1550 1520.00 - 1570.00 1405.00 1435.00 25.00 A + 10.00 A + 45.00 20.00 ± 4.00
VA 1600 1570.00 - 1620.00 1450.00 1480.00 25.00 A + 10.00 A + 45.00 20.00 ± 4.00
VA 1650 1620.00 - 1670.00 1495.00 1525.00 25.00 A + 10.00 A + 45.00 20.00 ± 4.00
VA 1700 1670.00 - 1720.00 1540.00 1570.00 25.00 A + 10.00 A + 45.00 20.00 ± 4.00
VA 1750 1720.00 - 1770.00 1585.00 1615.00 25.00 A + 10.00 A + 45.00 20.00 ± 4.00
VA 1800 1770.00 - 1820.00 1630.00 1660.00 25.00 A + 10.00 A + 45.00 20.00 ± 4.00
VA 1850 1820.00 - 1870.00 1675.00 1705.00 25.00 A + 10.00 A + 45.00 20.00 ± 4.00
VA 1900 1870.00 - 1920.00 1720.00 1750.00 25.00 A + 10.00 A + 45.00 20.00 ± 4.00
VA 1950 1920.00 - 1970.00 1765.00 1795.00 25.00 A + 10.00 A + 45.00 20.00 ± 4.00
VA 2000 1970.00 - 2020.00 1810.00 1840.00 25.00 A + 10.00 A + 45.00 20.00 ± 4.00
VS Style
G
D
V-Seals
B C E A F
VS- Style - The VS-style features a larger I.D. contact area than the VA - style. The added contact with the shaft
surface provides extra torque to the sealing lip.
V-Seals
Seal Dimensions Housing Dimensions
A B C D E F G
Part Number Shaft Diameter I.D. O.D. Height I.D. O.D. Width
VS 080 78.00 - 83.00 72.00 84.00 15.50 A + 4.00 A + 18.00 13.50 ± 1.20
VS 085 83.00 - 88.00 76.00 88.00 15.50 A + 4.00 A + 18.00 13.50 ± 1.20
VS 090 88.00 - 93.00 81.00 93.00 15.50 A + 4.00 A + 18.00 13.50 ± 1.20
VS 095 93.00 - 98.00 85.00 97.00 15.50 A + 4.00 A + 18.00 13.50 ± 1.20
VS 100 98.00 - 105.00 90.00 102.00 15.50 A + 4.00 A + 18.00 13.50 ± 1.20
VS 110 105.00 - 115.00 99.00 113.00 18.00 A + 4.00 A + 21.00 15.50 ± 1.50
VS 120 115.00 - 125.00 108.00 122.00 18.00 A + 4.00 A + 21.00 15.50 ± 1.50
VS 130 125.00 - 135.00 117.00 131.00 18.00 A + 4.00 A + 21.00 15.50 ± 1.50
VS 140 135.00 - 145.00 126.00 140.00 18.00 A + 4.00 A + 21.00 15.50 ± 1.50
VS 150 145.00 - 155.00 135.00 149.00 18.00 A + 4.00 A + 21.00 15.50 ± 1.50
VS 160 155.00 - 165.00 144.00 160.00 20.50 A + 5.00 A + 24.00 18.00 ± 1.80
VS 170 165.00 - 175.00 153.00 169.00 20.50 A + 5.00 A + 24.00 18.00 ± 1.80
VS 180 175.00 - 185.00 162.00 178.00 20.50 A + 5.00 A + 24.00 18.00 ± 1.80
VS 190 185.00 - 195.00 171.00 187.00 20.50 A + 5.00 A + 24.00 18.00 ± 1.80
VS 199 195.00 - 210.00 180.00 196.00 20.50 A + 5.00 A + 24.00 18.00 ± 1.80
VL Style
G
D
V-Seals
B C E A F
V-Seals
B C
E A F
VE- Style - Due to its extra long sealing lip, the VE-style V-seal is
used in applications where the housing is abnormally far away from
the shaft. VE V-seals larger than VE 2000 are available on inquiry.
A B A B A B
Part Shaft Seal Part Shaft Seal Part Shaft Seal
Number Diameter I.D. Number Diameter I.D. Number Diameter I.D.
VE 450 450.00 - 455.00 439.00 VE 660 660.00 - 670.00 640.00 VE 1040 1025.00 - 1045.00 990.00
VE 455 455.00 - 460.00 444.00 VE 670 670.00 - 680.00 650.00 VE 1060 1045.00 - 1065.00 1008.00
VE 460 460.00 - 465.00 448.00 VE 680 680.00 - 690.00 660.00 VE 1080 1065.00 - 1085.00 1027.00
VE 465 465.00 - 470.00 453.00 VE 690 690.00 - 700.00 670.00 VE 1100 1085.00 - 1105.00 1045.00
VE 470 470.00 - 475.00 458.00 VE 700 700.00 - 710.00 680.00 VE 1120 1105.00 - 1125.00 1065.00
VE 475 475.00 - 480.00 463.00 VE 710 710.00 - 720.00 689.00 VE 1140 1125.00 - 1145.00 1084.00
VE 480 480.00 - 485.00 468.00 VE 720 720.00 - 730.00 699.00 VE 1160 1145.00 - 1165.00 1103.00
VE 485 485.00 - 490.00 473.00 VE 730 730.00 - 740.00 709.00 VE 1180 1165.00 - 1185.00 1121.00
VE 490 490.00 - 495.00 478.00 VE 740 740.00 - 750.00 718.00 VE 1200 1185.00 - 1205.00 1139.00
VE 495 495.00 - 500.00 483.00 VE 750 750.00 - 758.00 728.00 VE 1220 1205.00 - 1225.00 1157.00
VE 500 500.00 - 505.00 488.00 VE 760 758.00 - 766.00 735.00 VE 1240 1225.00 - 1245.00 1176.00
VE 505 505.00 - 510.00 493.00 VE 770 766.00 - 774.00 743.00 VE 1260 1245.00 - 1270.00 1195.00
VE 510 510.00 - 515.00 497.00 VE 780 774.00 - 783.00 751.00 VE 1280 1270.00 - 1295.00 1218.00
VE 515 515.00 - 520.00 502.00 VE 790 783.00 - 792.00 759.00 VE 1300 1296.00 - 1315.00 1240.00
VE 520 520.00 - 525.00 507.00 VE 800 792.00 - 801.00 768.00 VE 1325 1315.00 - 1340.00 1259.00
VE 525 525.00 - 530.00 512.00 VE 810 801.00 - 810.00 777.00 VE 1350 1340.00 - 1365.00 1281.00
VE 530 530.00 - 535.00 517.00 VE 820 810.00 - 821.00 786.00 VE 1375 1365.00 - 1390.00 1305.00
VE 535 535.00 - 540.00 521.00 VE 830 821.00 - 831.00 796.00 VE 1400 1390.00 - 1415.00 1328.00
VE 540 540.00 - 545.00 526.00 VE 840 831.00 - 841.00 805.00 VE 1425 1415.00 - 1440.00 1350.00
VE 545 545.00 - 550.00 531.00 VE 850 841.00 - 851.00 814.00 VE 1450 1440.00 - 1465.00 1374.00
VE 550 550.00 - 555.00 536.00 VE 860 851.00 - 861.00 824.00 VE 1475 1465.00 - 1490.00 1397.00
VE 555 555.00 - 560.00 541.00 VE 870 861.00 - 871.00 833.00 VE 1500 1490.00 - 1515.00 1419.00
VE 560 560.00 - 565.00 546.00 VE 880 871.00 - 882.00 843.00 VE 1525 1515.00 - 1540.00 1443.00
VE 565 565.00 - 570.00 550.00 VE 890 882.00 - 892.00 853.00 VE 1550 1540.00 - 1570.00 1467.00
VE 570 570.00 - 575.00 555.00 VE 900 892.00 - 912.00 871.00 VE 1575 1570.00 - 1600.00 1495.00
VE 575 575.00 - 580.00 560.00 VE 920 912.00 - 922.00 880.00 VE 1600 1600.00 - 1640.00 1524.00
VE 580 580.00 - 585.00 565.00 VE 930 922.00 - 933.00 890.00 VE 1650 1640.00 - 1680.00 1559.00
VE 585 585.00 - 590.00 570.00 VE 940 933.00 - 944.00 900.00 VE 1700 1680.00 - 1720.00 1596.00
VE 590 590.00 - 600.00 575.00 VE 950 944.00 - 955.00 911.00 VE 1750 1720.00 - 1765.00 1632.00
VE 600 600.00 - 610.00 582.00 VE 960 955.00 - 966.00 921.00 VE 1800 1765.00 - 1810.00 1671.00
VE 610 610.00 - 620.00 592.00 VE 970 966.00 - 977.00 932.00 VE 1850 1810.00 - 1855.00 1714.00
VE 620 620.00 - 630.00 602.00 VE 980 977.00 - 988.00 942.00 VE 1900 1855.00 - 1905.00 1753.00
VE 630 630.00 - 640.00 612.00 VE 990 988.00 - 999.00 953.00 VE 1950 1905.00 - 1955.00 1794.00
VE 640 640.00 - 650.00 621.00 VE 1000 999.00 - 1010.00 963.00 VE 2000 1955.00 - 2010.00 1844.00
VE 650 650.00 - 660.00 631.00 VE 1020 1010.00 - 1025.00 973.00
Acetal
Material Summary
Aflas™
Carboxylated Nitrile
Chloroprene
Ethylene Propylene
Fluorocarbon
Viton® Extreme™
Fluorosilicone
Highly Saturated Nitrile
Hytrel®
Nitrile
PEEK
Perfluoroelastomer
Polyamide
Polyamide-imide
Polyurethane
PTFE
Silicone
UHMW-PE
˚C
Hi-Tech Seals works with industry leading elastomer, plastic and seal technology developers, such
as DuPont Performane Elastomers, Quadrant plastics and SKF Polyseal, to connect you with the
most effective sealing solutions. When working with Hi-Tech Seals, we can develop sophisticated
solutions for challenging applications. Additional material summaries are available at:
www.hitechseals.com/materials-summary.asp.
As an international seal distributor, Hi-Tech Seals can source global solutions for your sealing
needs. Customers benefit from customized and unique material solutions. If you believe your seal
requires unique chemical, thermal or physical properties, please contact your sales representative.
Material Summary
• It is used for valve seats, wear rings, spacer rings and is • Excellent resistance to ozone, hot water, steam and aging
often used as a bearing material • Wide temperature range
• Acetal is a hard thermoplastic material, which exhibits • Commonly used with brake fluids and refrigerants
excellent wear resistance, low water absorption, is easy to • Poor resistance to petroleum fluids and mineral oils
machine, and has a low coefficient of friction
Aflas™ (TFE/P) (Asahi Glass Co.) Fluorocarbon (FKM, FPM)(Viton® E.I. DuPont)
-9°C to + 232°C -26°C to + 204°C
+16°F to + 450°F -15°F to + 400°F
• Good high temperature capability • Excellent resistance to higher temperatures, petroleum oils,
• Resistant to strong acids and bases, amines, solvents and gasoline
hot water • Wide range of chemical resistance
• Aflas™ is found in numerous applications in the oilfield • Very good ozone, weather and aging resistance
industry • Poor compatibility with H2S over 2%, amines, acetone, hot
• Poor low temperature performance and low resilience water and steam
• Poor low temperature characteristics although some
compounds are suitable to -40°C/-40°F
Carboxylated Nitrile (CBX, XNBR)
-20°C to + 135°C
-4°F to + 275°F Fluorosilicone (FVMQ)
-56°C to + 204°C
• Increased strength, improved tensile and tear properties, -69°F to + 400°F
plus excellent abrasion resistance compared to a standard
Nitrile compound • Wide temperature range
• Lower solvent swell • Excellent resistance to hydrocarbon fuels, petroleum oils
• Excellent chemical resistance to petroleum oils and fluids and silicone oils
• Commonly used in dynamic applications • Relatively low tear strength, abrasion resistance and
• Do not use with polar solvents, glycol brake fluids, tensile strength
aromatic hydrocarbons, chlorinated hydrocarbons and • Generally not suited for dynamic applications
strong acids
Material Summary
• Polyamide-imide materials provide the overall highest per- • Has virtually universal chemical resistance
formance capability of any melt processable thermoplastic. • Very low coefficient of friction
• Duratron® offers good resistance to elevated temperatures • Fillers such as bronze, moly, glass and carbon are
as well as broad chemical resistance commonly added to alter mechanical properties
• Capable of performing under severe stress conditions at
continuous temperatures up to 260°C/500°F
• Has a low coefficient of thermal expansion and high creep Silicone (VMQ)
resistance which contributes to dimensional stability -65°C to + 232°C
-85°F to + 450°F
ISO 9001
REGISTERED QMS
ISD ISO 9001
REGISTERED QMS
ISD
www.hitechseals.com
Head Office:
9211 - 41 Avenue NW | Edmonton | AB | T6E 6R5
Ph: 780.438.6055 | Fax: 780.434.5866 | Email: info@hitechseals.com
Toll Free Ph: 1.800.661.6055 | Toll Free Fax: 1.800.465.5866
www.hitechseals.com
Kalrez®, Viton® and Viton® Extreme™ are registered trademarks of E.I. du Pont de Nemours and Company
Aflas™ is a trademark of Asahi Glass Co., Ltd.