Subsea 7 - Multi- Oil and Gas This project entailed
2012 Reel Drive System (Flexible the design, Product manufacture, Handling) installation and commissioning of an innovative multireel drive system for flexible pipelay in the oil and gas industry 2013 Subsea 7 - Air Oil and Gas (Air This project entailed Dive Handling Dive Support) the design, System manufacture, installation and commissioning an air dive handling system for the purpose of delivering support to divers and ancillary equipment to 50m water depths. 2013 Subsea 7 – Mobile Oil and Gas This project entailed Reel Drives (Flexible the design, Product manufacture, supply Handling) and delivery of two mobile flexible product reel handling Reel Drive Systems (SFL and ESFL) to deploy steel flying leads and electrical steel flying leads. 2014 Sampling Tool and Offshore Mining The LARS was LARS and Exploration designed to be Modifications installed onto a charter vessel but was never commissioned due to various technical problems being experienced with the sampling tool. 2015 SWORD Seafloor Deep-sea Mining operations Sampling Tool Mining and are by their nature Exploration founded on the existence and understanding of the mineral resources. Exploration, identification and development of mineral resources are fundamental to the existence of any mine. 2016 Cursor Winch Deep-sea The Cursor Winch, Mining and designed and Exploration manufactured for IHC Engineering Business, is located on the stabiliser unit of a marine launch and recovery system. The system is employed to recover a remotely operated underwater vehicle and was designed to Lloyds Register of Shipping specifications. 2017 ARDC Slurry Hose Subsea The design was Reel Market Diamond Mining developed as preliminary proof-of- concept. Subsequent to client approval thereof, the design was used as the basis for a feasibility design and Class II Estimate project. 2017 Coral Sea Port Aft Subsea This project entailed Mooring Winch Diamond Mining the design, Market manufacture, installation and commissioning of a mooring winch, tower assembly, deck bend sheave and fairleader for the mv Coral Sea vessel. Control and instrumentation was also a part of the scope. 2018 Umbilical Winches Offshore Oil & Design, Market Gas manufacture, assemble, factory acceptance test, deliver and commissioning of an ILUC Umbilical Winch, 2 x TRA Umbilical Winches and 1 x TRA Umbilical Winch to be used on a J-Lay Tower for pipe laying operations.
2018 Slurry Hose and Subsea Subsequent to the
Air Hose Reels Diamond Mining detail design phase concluded in 2017, IHC MMP successfully designed, manufactured, assembled, tested and delivered the Slurry Hose Reel and Air Hose Reel for the new De Beers Marine