Professional Documents
Culture Documents
IEC 60529 IP code is a coding system to indicate the degrees of protection provided by an
enclosure against access to hazardous parts, ingress of solid foreign objects, ingress of
water and to give additional information in connection with such protection IP code
includes 4 digits, like IP23CH. IP short for ingress protection; numeral 2 stands for first
characteristics and can be instead by numerals 0 to 6 or letter X (not requires to specified),
it indicates enclosure against ingress of solid foreign; Numeral 3 standards for second
characteristics and can be instead by numerals 0 to 8 or letter X (not requires to specified),
it indicates enclosure against ingress of water with harmful effects. Letter C is additional
letter, indicates enclosures access to hazardous parts, can be instead by letters A, B, C
and D, but this characteristic can be ignored; Letter H is supplementary letter, can be
instead by letters H, M, S and W, but this characteristic can be ignored. In this article, we
just discuss the first and second characteristics.
The first characteristic can mark with numerals 0 to 6. We temporally ignore the second
characteristic, additional letter and supplementary letter, i.e. IP0X to IP6X. According to
IEC60529, it describes as: IP0X——non protected; IP1X——≥50mm diameter;
IP2X——≥12.5mm diameter; IP3X——≥2.5mm diameter; IP4X——>1.0mm diameter;
IP5X——dust protected; IP6X——dust tight.
There are many standards refer to IEC60529 regarding dustproof test, like IEC60598
luminaires general requirements and tests, clause 2.3 mentioned to classified the
luminaire according to degree of protection against ingress of dust, solid objects and
moisture; GB2423.37-89 electric and electronic products basic environmental testing
procedure mentioned that sand and dust test method; GB/T4942.2-93 protection grade for
low voltage device shell; GB7000.1 and GB7001 luminaire general requirements and test
standard mentioned that the luminaire only need to do the test for IP5X and IP6X.
LISUN SC series dustproof testing machine is for IP5X and IP6X test.
There are also many standards refer to IEC60529 regarding dustproof test, like IEC60598
luminaires general requirements and tests mentioned to classify the luminaire according
to the degree of protection against ingress of water; IEC60335 house holding and similar
electrical appliance general requirements and IEC60034-5:2000 degrees of protection
provided by the integral design of rotating electrical machines mentioned the waterproof
test.
In practice, it is a big problem for electronic equipments, luminaire, and house holding
manufactures to find the right products to do the waterproof and dustproof test. Lisun
Group developed the SC-X series dustproof test chamber and JL-X series waterproof
test equipment according to IEC60529. SC-X dustproof test chamber is for IP5X and
IP6X test, there are several models for optional according to the sample size.
JL-X is for IPX1 to IPX8 test, there are four equipments for optional, JL-12 drip box is for
IPX1 and IPX2 test; JL-34 swing pipe water spray test equipment is or IPX3 and IPX4 test;
JL-56 waterproof jet test device is for IPX5 and IPX6 test; JL-78 immersion tank is for
IPX7 and IPX8 test.
Lisun Instruments Limited was found by LISUN GROUP in 2003.LISUN quality system
has been strictly certified by ISO9001:2015. As a CIE Membership, LISUN products are
designed based on CIE, IEC and other international or national standards. All products
passed CE certificate and authenticated by the third party lab.
Our main products are Goniophotometer, Spectroradiometer Integrating Sphere System,
LED Test Instruments, EMC & EMI Testing, Surge Generator, Electrical Safety Testing,
Environmental Test Chamber, Waterproof Test ,Dustproof Test , High and Low
temperature Humidity Chamber, Plug and Switch Testing,etc.