Professional Documents
Culture Documents
ISO 9606-1:2012(E)
Annex A
(informative)
Designation(s): ................................................................................................................
................................................................................................................
WPS – Reference: Examiner or examining body – Reference No.:
Welder's name:
Identification:
Method of identification: Photograph
Date and place of birth: (if required)
Employer:
Code/testing standard:
Job knowledge: Acceptable/Not tested (delete as necessary)
Test piece Range of qualification
Welding process(es);
Transfer mode
Product type (plate or pipe)
Type of weld
Parent material group(s)/subgroups
Filler material group(s)
Filler material (Designation)
Shielding gas
Auxiliaries ------------------------
Type of current and polarity ------------------------
Material thickness (mm)
Deposited thickness (mm)
Outside pipe diameter (mm)
Welding position
Weld details
Multi-layer/single layer
Supplementary fillet weld test (completed in conjunction with a butt weld qualification): acceptable/not acceptable
Type of test Performed and accepted Not tested Name of examiner or
Visual testing examining body:
Radiographic testing Place, date and signature
of examiner or examining
Fracture test body:
Bend test Date of issue: 2007-01-20
Notch tensile test
Macroscopic examination
Confirmation of the validity by employer/welding coordinator/examiner or examining body for the following 6 months [refer to
9.2)]
Date Signature Position or title