Professional Documents
Culture Documents
Reviewed by E. J. Jeon
Contractor Takenaka
Approved by B. S. Kwak
Requirement :
As per Standard Drawing No.100.00-R-005 and SNI 03.2847-2013, minimum rebar bending
1.
shall follow the table below :
Bar
D MIN
Size, db
(mm)
(mm)
10 60
13 80
16 100
19 115
22 135
25 150
29 235
32 260
2. Required date for completion is 16-Mar-20
RECOMMENDED DISPOSITION
Rework Repair ● Conditional release
Paint
Bar Size,
Shop
db (mm)
(mm)
Less than
10 55 minimum
13 70 diameter (Not
OK))
16 95 Not available at
19 120 rebar fabrication
22 135
25 150
Received by
HMMI 2 of 3
PROJECT NAME : HMMI (HYUNDAI MOTOR MANUFACTURING INDONESIA)
Building : Utility
Department : Construction Quality Date : 9-Mar-20
Pin 115mm for D19 rebar shall
Sel No. 4 Item Pin Ring Descrip Location Fabrication
be provide
Photo Inspection Finished
NOT AVAILABLE
NOT AVAILABLE
NOT AVAILABLE
HMMI 3 of 3