Professional Documents
Culture Documents
Content
NOTE:
This Quick Guide is used primarily for commissioning the unit at start-up by providing the parameters
necessary to start operation. Details for mechanical information, safety information, configuration
and handling of these products are provided in the manual and configuration guide.
Generally, the operator of a communication system is responsible for its safe operation. Some
important points to respect are e.g.
Assessment of hazard levels at accessible locations,
Care for the proper installation and maintenance,
Measures for the safe operation, like access control and adequate staff training.
Please note that discharge might go unnoticed by a user. Always take normal
static precautions when handling the equipment!
The assembled GT41 module is connected via the internal GT11 switch and is automatically shown on
the left sight of the user menu (for example M5: Module 5–GT41)
Condition Limits
Permissible operating temperature inside -5…+45 °C (ETSI EN 300 019-1-3 Class 3.1)
Recommend operation range of +15…+35 °C
Humidty Up to 95%, non-condensing
E-mails sent to the above e-mail address will be available to all support staff.
Visit www.wisiconnect.tv for more information about configuration, Software, Entitlements and
Product information.