You are on page 1of 6

Name : R.

VISHNUSHANKAR
Email ID : rvishnu84@gmail.com
Contact No : +971562398104 , +917358302902
Total Exp : 14 Years

CURRICULUM VITAE

POST APPLIED FOR “SENIOR INSTRUMENT TECHNICIAN”

Summary :
Over 14 years of Experience in instrument Maintenance and Commissioning
Technician in Oil & Gas – Upstream & Downstream industries like Oil Production
(Offshore/Onshore), LNG Plant, NGL Plant, Refinery, Tank farms, water cluster,
and Oil Production Well Head
Skills :
Carrying out day to day plant maintenance, Routine Preventive maintenance for
critical instruments, Corrective Maintenance ,Shutdown overhauling, Online fault
finding ,Servicing of Electronics & Pneumatic Instruments, Control valve Servicing
,Calibration of HART & Foundation Field BUS (FF )Transmitters using Hart
Communicator 375, System Configuration, Material Management (MAXIMO), Loop
Checking, Pre – Commissioning, Commissioning & Start up Activities. Ability to
work in shifts and can handle the plant independently.
HSE Experience:
 Follow work permit safety procedures & precautions
 Reporting Hazards, Near Misses, un-safe practices in HEARTS.
 Conducting Tool Box safety Meeting before proceeding to job.
HSE Training Attended:
Course Organization
1 HUET & Sea Survival SURAKSHA MARINE, INDIA
2 Work permit System ADCO , ABU DHABI
3 Confined space entry, H2S & BA ADCO, ABU DHABI
4 Safety Induction & Basic Fire Fighting ADCO, ABU DHABI
5 First Aid Course ADCO, ABU DHABI
Educational Qualification :
Three Years Diploma in Electronics and Communication Engineering (Passed
in 2002) (State Board of Technical Education, Tamilnadu)

One Year Post Graduate Diploma in Chemical Process Instrumentation


and Control (Passed in 2003) Annamalai University

Page 1 of 5
S.S.L.C (Passed in 1999) (State Board of Secondary Education, Tamilnadu)
Work Experience :

Apr 2012 to June 2016 :


ABUDHABI COMPANY FOR ONSHORE PETROLEUM OPERATION (ADCO)
As a Instrument Maintenance Foreman (DH)

 Day to day Maintenance of oil & gas Production facilities in Abu dhabi South East
(Sahil,Qusahwira,Shah) Field Central Degassing Station , Remote Degassing Station,
Oil Production Well,Gas Injection Well,Water Injection Cluster which includes
Air Compressor,Multi Selector manifold,Multiphase Flow meter,Separator,Booster Pump,
MOL Pump,Pig Launcher,vapour Recovery Compressor,Water Disposal Tank,Process drain
drum,Gas Compressor,Fire Water Pump,Deluge system,SSV,PILOT

 Involved in SAT,Loop test , Functional Test,Commissioning and Start-up Activities


in Qusahwira and SHAH Plant FFD Project.

 Involved in checking and reviewing of Commissioning and Maintenance spares and


assisting engineer in preparing reviewing related SPIR’s

 System based Maintenance Activities – YOKOGAWA CENTUM VP ,


YOKOGAWA PROSAFE –RS ,S7 -400 PLC ,BENTLY NIVEDA 3500

 Well Head Integrity Test ( Functional Test ) ,will check Low Pressure ,High Pressure
Trip,Low pilot SSV Trip, High Pilot SSV Trip & Under Load Trip for Electrical
MOTOR

 Commissioning of different type of Well Head Control Panel CAMERON


,HALLIBURTON,BARBER

 Maximo for Maintenance for work order & material

Jun 2010 to Jan 2012 :


Kuwait National Petroleum Company (KNPC) - MINA AL- AHMADI REFINERY:
Maintenance through ALMEER as a Senior Instrument Foreman in NGL Plant
& LNG Plant

 Performing Preventive and Corrective Maintenance of NGL Plants and facilities.


 Mina Al Ahmadi South Pier OFFSHORE LNG Terminal Facility, a Floating Storage and
Regasification Vessel (FSRU) is supplied LNG cargoes via conventional LNG Carriers
across-the-dock cryogenic ship-to-ship Transfer System with the LNG Transfer Rates to
a
maximum of 5,000m3/hour through two FMC Cryogenic Liquid Transfer Arms

 Carried out ESD functional Test, Ship to shore followed by shore to ship
Responsible for troubleshooting & maintenance of Control & field Instruments related to Oil-
Pier Equipments like Loading Arms(FMC), Metering skids (Daniel), Provers. And Packages
like; N2 Generation, Air Compressor, Pumps etc.

PLC,
System based Maintenance Activities – FOXBORO IA SERIES, SIEMENS S7 PLC, HIMA
Loading Arms(FMC), BMS-Berth monitoring System (SEATECHNIC), Vessel Traffic
System (VTS) – ATLAS ELECTRONIK, Berth Aiding System (BAS)- MARIMATECH, Ship
Approaching System (SAS) – MARIMATECH.

May 2009 to May 2010:

Kuwait Oil Company (KOC) Gathering Center 09: Maintenance Project Through
ALMEER as a Senior Instrument Technician

 Worked on Preventive & Corrective Maintenance, Shutdown Overhauling of


Gathering Centre -09 (East Kuwait) which includes equipment like
separator, desalter, Heater, Storage Tanks, Condensate Recovery Unit,
Feed Pump.

 Maintenance and Start up Activities of GAS TURBINE – RUSTON TA 1500


 System Related Maintenance Activities- Honeywell Experion PKS
Mar 2005 to Jan 2009:

Kuwait Oil Company (KOC) - Gathering Center 27: New Unit Commissioning &
Maintenance through HEISCO as a Senior Instrument Technician

 Involved in Pre-Commissioning ( Loop Test, Functional


Test),Commissiong,Start- up Activities and Maintenance of Expansion Project
Gathering Center -27 which consist of Separator,Desalter,Heater,Feed Pump,
Wet Tank, Manifold

 System Related Maintenance Activities – Rosemount RS


3 Mar 2004 to Feb 2005:

Oil and Natural Gas Corporation (ONGC) – India Maintenance through M/s.
H.A.L. Offshore as a OFFSHORE INSTRUMENT TECHNICIAN
 Involved in Preventive & Corrective Maintenance, Calibration of Instruments
on Offshore Platforms

 Updating daily activities and report to supervisor


May 2002 to Jan 2004:

Cairn Energy India Ltd, India Maintenance through M/s. Promantech Consultants
Pvt. Ltd as a OFFSHORE INSTRUMENT TECHNICIAN
 Involved in Preventive & Corrective Maintenance, Calibration of Instruments
on their fixed oil and gas Platforms at Hazira Off-shore and On-shore
terminal at Surat,India. Perform scheduled Instrumentation assignments, as
Per Planning Schedule, process checks and well – head activities. Making
documents and updating record while on job.
System Experience:
DCS - Yokogawa Centum VP, Rosemount RS 3, Honeywell TDC-3000
Experion PKS, Foxboro I/A Series
PLC -Allen Bradley PLC – SLC 5/02, 5/04, Siemens - RS logix500, SIMATIC S7-300
ESD- Yokogawa Prosafe, Honeywell FSC, FOXBORO Triconex
FIELD EXPOSURE :

 Maintenance of various Process systems like ( Instrument Air


Compressor, Nitrogen Compressor, MSM (Multi Selector
Manifold ),MPFM(Multiphase Flow meter),Separator,
Desalter,Heater,Booster Pump, MOL Pump,Vapour
Recovery Compressor, Process drain, Water Disposal, Fire Water, deluge
system, Spiking gas Compressor, Flare system

 Calibration, testing, loop checking, troubleshooting and maintenance of


HART & FF Transmitters (Yokogawa, Rosemount,Foxboro,ABB)
which are used to control the process equipments

 Hands on Experience with Plant Resource Manager ( PRM) for checking


healthiness of field instruments from remote location.

 Partial Stroke Test using valvelink software for critical valves


 System based trouble shooting of startup interlocks, start up sequence,
ESD system Based on function block, ladder logic and relay logic.

 Functional test of HIPPS (High Integrity Pressure Protection system)

 Configuration of Guided wave RADAR Level Transmitter ( Magnetrol ,


Endress Hauser) in PRM by checking ECHO CURVE.

 Wet Leg and Dry Leg Calibration of Level Transmitter


 Calibration of Level trols using HART (Magnetrol , Fisher, Masoneilan).
 ROSEMOUNT SAAB RADAR Tank Level Gauging system.

 Servicing, calibration and testing of "Valve Positioner" as well as


Control valve of Fisher, Masoneilan , and ABB-KENT

Worked with Control valve Accessories Like Limit Switches, Solenoid


valve, I/p-converter, Volume Booster, and Pressure regulator

 Calibration , Bump Test for Toxic Gas Detector ( Drager,General Monitor)


 Calibration for Flammable gas Detector ( Drager )
 Functional test of UV/IR Fire Detector, Deluge and Fire Water System
 Able to Understand the Instrumentation Diagram like P&ID,INSTRUMENT
LOOP DIAGRAM, INSTRUMENT LOGIC DIAGRAM, CAUSE AND
EFFECT and HOOKUP Diagram

PERSONAL DETAILS:

Name : R.VISHNUSHANKAR
Father’s Name : M.RAJENDRAN
Date of Birth : 12/02/1984
Nationality : Indian
Marital status : Married
Passport Number : K7900763, Valid up to 17/09/2022
GCC License : Yes
Contact Number : +971562398104,+917358302902
Email : rvishnu84@gmail.com
Permanent Address : R.Vishnushankar,
272, Sivagamipuram Street,
Rajapalayam - 626117,
Tamilnadu,
India.

Languages Known : English, Hindi, Tamil, Telugu & Malayalam

I am having an adequate exposure to theoretical as well as Practical aspects


in instrumentation course and curriculum. I hereby state that the above mentioned
Details are true and correct to best of my knowledge and can be verified when
Called for interview.

Place: Abu dhabi


Date: (R.VISHNUSHANKAR)

Page 5 of 5
 Functional test of UV/IR Fire Detector, Deluge and Fire Water System
 Able to Understand the Instrumentation Diagram like P&ID,INSTRUMENT
LOOP DIAGRAM, INSTRUMENT LOGIC DIAGRAM, CAUSE AND
EFFECT and HOOKUP Diagram

PERSONAL DETAILS:

Name : R.VISHNUSHANKAR
Father’s Name : M.RAJENDRAN
Date of Birth : 12/02/1984
Nationality : Indian
Marital status : Married
Passport Number : K7900763, Valid up to 17/09/2022
GCC License : Yes
Contact Number : +971562398104,+917358302902
Email : rvishnu84@gmail.com
Permanent Address : R.Vishnushankar,
272, Sivagamipuram Street,
Rajapalayam - 626117,
Tamilnadu,
India.

Languages Known : English, Hindi, Tamil, Telugu & Malayalam

I am having an adequate exposure to theoretical as well as Practical aspects


in instrumentation course and curriculum. I hereby state that the above mentioned
Details are true and correct to best of my knowledge and can be verified when
Called for interview.

Place: Abu dhabi


Date: (R.VISHNUSHANKAR)

You might also like