Professional Documents
Culture Documents
Sync-In
FSMF-2
SRAN-1
SRIO
FSMF-1
Sync-Out SRIO
Sync-Out
SBTS (LTE900+LTE1800)
SRAN/SRAT-SRAN with 2
Gambar 2. SRAN with L2100 (RF sharing with U2100) and SRAN with LTE900/1800
Pre-requisite:
1. SW level must be the same for all BTS (L18SP, SBTS18SP, WBTS18)
2. SRAN-1 (2xFSMF) is always act as Sync Master for both CA with SRAT/SRAN
3. SRIO cable from SRAN-1 to SRAN-2 (SRIO port in FBBC (port#4)) and between primary &
secondary FSMF in SRAN-2 (SRIO port)
4. RP3 cable between primary & secondary FSMF of SRAN-2 for sync
5. SHDF Cable between primary & secondary FSMF of SRAN-2
6. SHDF cable between SRAN-1 and SRAN-2/LTE
7. SHDF cable between LTE and 3G BTS
8. Use btsSyncMode=FreqSync (TOP-F) for Master BTS and btsSyncMode=PhaseSync for Slave
BTS
Step:
MRBTS-XXXXX/MNL-1/MNLENT-1/SYNC-1/CLOCK-1
syncMaster=true
outputConfiguration1Pps=EnabledWithBtsInputReference
syncInputType=TOPF
syncInputPrio=1
holdOverModeUsed=false
totalDelayFromSHM=8 ns
MRBTS-XXXXX/MNL-1/MNLENT-1/SYNC-1/CLOCK-2
outputConfiguration1Pps=disable
outputConfiguration2M048=disable
holdOverModeUsed=false
MRBTS-XXXXX/MNL-1/MNLENT-1/SYNC-1/CLOCK-1
syncMaster=true
syncInputType=1pps/ToD from Sync Hub Master
syncInputPrio=1
holdOverModeUsed=false
outputConfiguration1Pps=disable (for SRAN L2100)
outputConfiguration1Pps=EnabledWithBtsInputReference (for SRAT L2100)
totalDelayFromSHM=37ns (for SRAN L2100)
totalDelayFromSHM=62ns (for SRAT L2100)
MRBTS-XXXXX/MNL-1/MNLENT-1/SYNC-1/CLOCK-2
outputConfiguration1Pps=disable
outputConfiguration2M048=disable
holdOverModeUsed=false
syncMaster=false
Note:
If RF sharing with U2100, change Network Synchronization mode to Phase synchronization and 1pps
synchronization input source in use as Sync Hub Master as reference source, and put 1pps source line
delay as 62 ns (after L2100 recommissioning done)
4. Set FBBC SRAN-2 (FSMF-2) as SRIO
MRBTS-XXXXX/EQM-1/APEQM-1/CABINET-2/BBMOD-1
linkId=4
Mode=SRIO
5. Ensure the parameters displayed below shall have the same values in both SBTS
Parameter MO
cqiPerSbCyck LNCEL
riEnable LNCEL
periodicCqiFeedbackType LNCEL
riPerM LNCEL
caPoolId LNCEL
cellResourceSharingMode LNCEL
actSuperCell LNCEL
sCellDeactivationTimerEnb LNBTS
actFlexScellSelect LNBTS
caClusterId LNBTS
6. Set caClusterMemberId with unique ID for both MRBTS (caClusterMemberId 1 & 2, for example)
7. Activate inter-eNB Carrier Aggregation (actInterEnbDLCAggr=true)
8. Validate parameters
9. Activate parameters
10. SBTS will restart
11. Expected result is both SBTS on-air and no alarm issue
12. CA cell shown in Web-EM (Inter-eNB cells)
SRAN-1
SRAN-2
SCF Files:
SRAN-SRAN CA
Full_Configuration_ Full_Configuration_
scf_MRBTS-61702_WE-LDII_20190116-2326.xml
scf_MRBTS-61802_GDULT-LDII-XYX_20190117-0040.xml