You are on page 1of 7

PN8603-X-2 xPON OLT

Product specifications

TOPVISION TECHNOLOGIES CO., LTD.


http://www.sumavision.com
http://www.top-vision.cn
Issue:R01P01
PN8603-X xPON OLT Product specification

Product Brief
Topvision PN8603-X-2 rack OLT provides GPON, EPON, 10G EPON
and 10GE access, supports FTTH, FTTO, FTTB and FTTC networking
to meet home access, enterprise access, Wi-Fi and other business
scenario requirements, and achieve a fiber-optic network to carry
out full business.

PN8603-X2 OLT can provide a complete FTTx access solution with different types of ONU/MDU, and can be
unified by aggregation switches to simplify the network structure and improve network reliability.

Usage scenarios

Product features
System capability
 Supports 1.2 Tbps backplane capacity, 960Gbps switching capacity and 144K MAC address.
 As a multi-service access device, it supports the unified platform access of GPON, EPON and 10G EPON
terminals, and supports the network management graphical interface based on SNMP, which is convenient
for future maintenance.
High reliability
 Provides highly reliable network function, supports hot backup of dual main control board, load sharing of
dual main control board and redundant backup of dual power supply.
 Provides comprehensive quality of service (QoS) functions, and supports traffic classification management,
priority control and bandwidth control.
 Supports dual management mode based on SLA and priority and flexible broadband management
capability.
Multiple use scenarios
 Supports various telecommunication services, such as MAC address binding and filtering, bandwidth control,
VLAN, traffic control and other management functions.
 Supports the internal traffic exchange of virtual local area network (VLAN) to meet the application
requirements of enterprise and community networks.
 Supports non-convergence access of IPTV users, and 2000 multicast groups for a single device.
Smooth evolution

Specifications are subject to change without notice. 1


PN8603-X xPON OLT Product specification

 Supports EPON and 10G-EPON common platform to achieve smooth evolution and ultra-high bandwidth
access.
 Supports IPv4/IPv6 dual protocol stack, IPv6 multicast, and smooth evolution from IPv4 to IPv6.

Product specifications
Size (W/H/D)
483×88×370
mm
Operating
-10°C to +55°C
temperature
RH 10% to 90%
Maximum
power 320W
consumption
AC220V(90V to 280V)
Power supply 30A overcurrent protection
Dual power module redundancy protection
2 main control slots
Configuration 2 business slots
2 power modules
Maximum
backplane 1.2 Tbps
capacity
Switching
capacity of MPUD: 960Gbps
the system
Main control
board MPUD: 72K
MAC entry
Uplink
interface MPUD: 4 *10GE SFP+, Compatible with GE optical/electrical modules
board
EPON
EPUC: 16*EPON SFP
interface
Supports PX20/ PX20+/ PX20++
board
GPON
GPUA: 16*GPON SFP
interface
Supports Class B+/ Class C+/ Class C++
board
10G EPON XPUB: 8 *10G-EPON XFP
interface Supports 10G/10G, 10G/1G, 1G/1G EPON with PR20/ PR30
board Supports 10G/1G, 1G/1G EPON with PRX20/ PRX30
Configuration Supports CLI, Console port, TELNET
& Supports SNMPv2/v3
management Supports SNTP

Specifications are subject to change without notice. 2


PN8603-X xPON OLT Product specification

interface Supports FTP for software upgrade


Supports USB storage device for software upgrade

Supports ITU-T G.984.x


Supports downlink 2.5Gbps/uplink 1.25Gbps
Supports up to 60 km transmission distance
Maximum 128 split ratio
Supports AES-128 encryption, and uplink and downlink triple agitation
encryption
GPON Supports ONU terminal legality authentication, and illegal ONU
registration event reporting
Supports DBA, granularity 256K bit/s
Supports standard OMCI
Supports ONU software batch upgrade, scheduled upgrade, and real-time
upgrade
Supports PON port optical power detection
Supports IEEE 802.3ah EPON
Supports CTC3.0 EPON
Supports downlink 1.25Gbps/uplink 1.25Gbps
Supports up to 60 km transmission distance
PON
Maximum 64 split ratio
features
Supports AES-128 encryption, and uplink and downlink triple agitation
encryption
EPON Supports ONU terminal legality authentication, and illegal ONU
registration event reporting
Supports DBA, granularity 64K bit/s
Supports standard OAM and extended OAM
Supports ONU software batch upgrade, scheduled upgrade, and real-time
upgrade
Supports PON port optical power detection
Supports uplink FEC and downlink FEC
Supports IEEE 802.3av 10G EPON
Supports CTC3.0
Supports three-EPON terminal hybrid access: 10Gbps/10Gbps,
10G EPON 10Gbps/1Gbps, 1Gbps/1Gbps
Maximum 128 split ratio
Supports uplink FEC and downlink FEC
Supports rogue ONU detection and processing

Supports MAC Black Hole


Supports Port MAC Limit
Layer 2 VLAN+MAC Supports 4K VLAN
features forwarding Supports VLAN based on port, MAC, protocol and IP subnet
Supports QinQ
Supports PVLAN to realize port isolation

Specifications are subject to change without notice. 3


PN8603-X xPON OLT Product specification

PPPoE+ Supports PPPoE+

Supports obtaining vendor information via option 43


DHCP Supports device type identification via option 60
Option43/60/82 Supports extension device type
Supports inserting option82 information for DHCP relay

Supports configuring transmission-limit


Supports configuration of spanning tree bridge priority
RSTP
Supports configuring the spanning tree Max age
Supports fast convergence

Supports uplink and downlink bandwidth control


Port Supports static and LACP dynamic port aggregation
Supports port mirroring

Supports link aggregation of single or double VLAN


Supports the same board and cross board TRUNK
LACP Supports load sharing mode
Supports configuration of 32 TRUNK groups
Supports configuration system priority

IEEE 802.1D, Spanning Tree


IEEE 802.1Q, VLAN
Ethernet
IEEE 802.1w, RSTP
protocol
IEEE 802.3ad LACP
Ethernet – II
Supports the default routing gateway function
IPv4 / v6 static
Supports configuring route priority
route & policy
Supports load sharing (ECMP) and active/standby routing
route
Supports hardware forwarding load sharing (ECMP)

Supports the binding of protocol process and VRF instance


Supports stub, totally stub, NSSA, and totally NSSA
Business Supports OSPF message encryption
features OSPFv2/v3 Supports LSDB overflow alarm
Supports P2P and broadcast links
Supports route republication
Supports DR election

Supports controlling the generation and publishing of routing information


Supports the selection of control BGP path
BGP
Supports the configuration of BGP session survival and retention time
Supports fast recovery of direct connection EBGP session

VRF instances have completely independent routing tables


VRF instances support 3 layers of logical interfaces
VRF
VRF instances support joining a single or multiple OSPF routing processes
Supports BFD link fault detection

Specifications are subject to change without notice. 4


PN8603-X xPON OLT Product specification

IGMP v1/ v2/ v3,IGMP Snooping,IGMP Proxy


MLD Snooping,MLD Proxy
Supports IGMP cascading
Supports IGMP module active/standby switchover
Supports IPTV multicast based on VLAN
Multicast
Supports multicast monitoring and diagnosis tools
Supports IGMP controlled multicast
Supports Fast Leave
Compatible with EPON / GPON / 10G EPON interfaces
Supports IPv4 PIM-SM, PIM-SSM 3 layers multicast

Supports MPLS LDP security mechanism


Supports MPLS LDP active/standby switchover
Supports MPLS LDP neighbor discovery
MPLS MPLS OAM
Supports dynamic LSP
MPLS IP VPN(BGP)
MPLS L2 VPN(VPLS)

Supports data message stream classification and priority mapping


Supports SP+WRR queue scheduling
QOS
Supports CAR, traffic monitoring and traffic shaping
Supports queue scheduling PQ/WRR/PQ+WRR
Supports standard and extended ACL
Supports stream classification and definition based on source/destination
MAC, source/destination IP, source/destination protocol port, VLAN ID,
Ethernet protocol type, IP upper layer protocol type, IP protocol version,
802.1p priority, IP priority, DSCP priority, etc
ACL v4/v6 Supports message mirroring and message redirection for ports or
customized streams
Supports advanced queue scheduling based on port or customized
streams, and supports 8 priority queues per port
Supports congestion avoidance mechanism, including Tail-Drop, WRED and
other functions

EPON: Type B/Type D PON protection


10G EPON: Type B PON protection
Link protection GPON: Type B protection
Supports multiple path backup
Supports flow protection in case of link failure
Security
Supports the specified PON port to continuously send loopback detection
features
Equipment messages
protection Dual main control board redundant backup
Dual power board redundant backup
By binding access-list ID to telnet clients, telnet access control can be
User security
realized

Specifications are subject to change without notice. 5


PN8603-X xPON OLT Product specification

Supports tacacs+, radius, local enable, none

Supports preventing dos and virus attacks on CPU


Supports SSHv2 Secure shell
Equipment
Supports SNMP V3 encryption management
security
Supports hierarchical protection of maintenance users to prevent
unauthorized users from trespassing

TOPVISION TECHNOLOGIES CO., LTD.


Address: Sumavision Plaza, No.15, KaiTuo Road, Shangdi Information and Industry Base, Haidian District, Beijing, 100085, CHINA
Postcode: 100085
Tel: +86 10 82345858
Fax: +86 10 62978800
Website: http://en.sumavision.com

Specifications are subject to change without notice. 6

You might also like