Professional Documents
Culture Documents
reviewer1@nptel.iitm.ac.in ▼
Unit 6 - Week 5:
Course
outline Assignment 5
The due date for submitting this assignment has passed. Due on 2018-03-14, 23:59 IST.
How to access
the Portal? Submitted assignment
Week 1: 1) The mechanical efficiency of a centrifugal pump is defined as the ratio of 8 points
the manometric head to the head imparted by the impeller to the liquid
Week 2:
the head imparted by the impeller to the liquid to the manometric head
Week 3: the mechanical energy available at the impeller to the energy supplied to the shaft
the energy supplied to the shaft to the mechanical energy available at the impeller
Week 4:
No, the answer is incorrect.
Week 5: Score: 0
Accepted Answers:
Lecture 21:
Characteristics
the mechanical energy available at the impeller to the energy supplied to the shaft
of a Centrifugal
2) Two centrifugal pumps can operate independently at heads H1, H2 and 9 points
Pump
discharge Q1, Q2, respectively. If the pumps are connected in parallel, then what are the
Lecture 22:
Matching of resulting discharge (Q) and head(H)?
Pump and
System Q = Q1 + Q2, H = H1 + H2
Characteristics Q = Q1 - Q2, H = H1 - H2
Lecture 23: Q = Q1 = Q2, H = H1 = H2
Diffuser and
Cavitation Q = Q1 + Q2, H = H1 = H2
Lecture 24: No, the answer is incorrect.
Tutorial - VI Score: 0
Lecture 25: Accepted Answers:
Tutorial - VII
Q = Q1 + Q2, H = H1 = H2
Feedback for
week 5 3) If
two pumps identical in all respects and each capable of delivering a discharge9 points
Q against a head H are connected in series, the resulting discharge is
Quiz :
Assignment 5
Q against a head 2H
Solution- 2Q against a head H
Assignment 5
2Q against a head 2H
Week 6: Q against a head H
No, the answer is incorrect.
Week 7:
Score: 0
https://onlinecourses.nptel.ac.in/noc18_me24/unit?unit=39&assessment=89 2/4
24/07/2018 Fluid Machines - - Unit 6 - Week 5:
No, the answer is incorrect.
Score: 0
Accepted Answers:
20
9) A centrifugal pump to discharge 0.118 m3/s at a speed of 1450 rpm against a 13 points
head of 25 m. The impeller diameter is 25 cm, its width at outlet is 5 cm and manometric
efficiency is 75%. The vane angle at outer periphery of impeller is
46.77°
59.77°
69.77°
38.77°
No, the answer is incorrect.
Score: 0
Accepted Answers:
59.77°
10)A centrifugal pump is required to work against a head of 20 m while rotating 15 points
at the speed of 700 rpm. The blades are curved back to an angle of 30° to the tangent at
outlet tip and velocity of flow through impeller is 2 m/s. If all the kinetic energy at
impeller outlet is wasted, the impeller diameter at the outlet ( in cm) will be in the range
of
54-56
64-66
74-76
84-86
No, the answer is incorrect.
Score: 0
Accepted Answers:
54-56
Funded by
Powered by
https://onlinecourses.nptel.ac.in/noc18_me24/unit?unit=39&assessment=89 3/4
24/07/2018 Fluid Machines - - Unit 6 - Week 5:
https://onlinecourses.nptel.ac.in/noc18_me24/unit?unit=39&assessment=89 4/4