Professional Documents
Culture Documents
reviewer1@nptel.iitm.ac.in ▼
Courses » Material Science and Engineering Announcements Course Ask a Question Progress Mentor
Week 2.
Microscopes,
microstructures and
quantitative
metallography
Week 3. Defects,
diffusion and phase
diagram
Week 4. Equilibrium
phase diagram, iron-
carbon phase
diagram, lever rule,
phase transformation
Lesson 1.
Equilibrium and non-
equilibrium cooling
Lesson 2. Consider Alloys 1 and 2. Match the expected phases present at points a,b,c,e,f with the schematic
Equilibrium cooling microstructures shown against b’,c’,d’,e’,f’.
of eutectic system
Lesson 3.
Solidification
structure
a-b’, b-d’, c-e’, d-c’. e-a’
Lesson 4. Iron-
carbon phase
a-b’, b-c’, c-d’, d-e’. e-a’
diagram a-b’, b-e’, c-d’, d-d’. e-a’
Lesson 5. a-b’, b-b’, c-e’, d-c’. e-a’
Nucleation and
No, the answer is incorrect.
growth
Score: 0
Feedback week-4
Accepted Answers:
Quiz : Assignment 4 a-b’, b-c’, c-d’, d-e’. e-a’
Hints and Solutions 2) Identify the name of phases mentioned as 1 and 2 in microstructure against b’ respectively: 1 point
α + β + liquid
https://onlinecourses.nptel.ac.in/noc18_mm05/unit?unit=23&assessment=81 1/4
21/05/2018 Material Science and Engineering - - Unit 5 - Week 4. Equilibrium phase diagram, iron-carbon phase diagram, lever rule,…
Week 7. α + liquid
Strengthening β + liquid
mechanism, fracture α+β
and fatigue
No, the answer is incorrect.
Week 8. Creep, Score: 0
ceramics and plastic,
NDT techniques, Accepted Answers:
alloy designation α+β
4) Name the point ‘e’.(b) 1 point
DOWNLOAD VIDEOS
Eutectoid point
Eutectic point
Peritectic point
Triple point
No, the answer is incorrect.
Score: 0
Accepted Answers:
Eutectic point
5) Calculate the approximate phase fraction using Lever rule at point “d” mentioned in the phase 1 point
diagram.
Proeutectic α = 0.49
Eutectic (α + β) = 0.51
Both
Proeutectic α = 0.51
No, the answer is incorrect.
Score: 0
Accepted Answers:
Proeutectic α = 0.51
6) Identify the type of interface in order 1,2,3 as shown in fig below 1 point
https://onlinecourses.nptel.ac.in/noc18_mm05/unit?unit=23&assessment=81 2/4
21/05/2018 Material Science and Engineering - - Unit 5 - Week 4. Equilibrium phase diagram, iron-carbon phase diagram, lever rule,…
It gives information on transformation rates.
8) Horizontal arrest in a cooling curve represents: 1 point
Continuous cooling
Invariant reaction
Variant reaction
Both (a) and (b)
No, the answer is incorrect.
Score: 0
Accepted Answers:
Invariant reaction
9) Both nucleation and growth require change in free energy to be ________. 1 point
–ve
zero
+ve
Any
No, the answer is incorrect.
Score: 0
Accepted Answers:
–ve
10)Eutectoid product in Fe-C system is called 1 point
Pearlite
Bainite
Ledeburite
Spheroidite
No, the answer is incorrect.
Score: 0
Accepted Answers:
Pearlite
11)Growth occurs by 1 point
Container wall
Grain boundaries
Stacking faults
Dislocations
No, the answer is incorrect.
Score: 0
Accepted Answers:
Container wall
13)During homogeneous nucleation, critical size of a particle ______ with increase in undercooling. 1 point
Increases
Decreases
Won’t change
Not related
No, the answer is incorrect.
Score: 0
Accepted Answers:
Decreases
https://onlinecourses.nptel.ac.in/noc18_mm05/unit?unit=23&assessment=81 3/4
21/05/2018 Material Science and Engineering - - Unit 5 - Week 4. Equilibrium phase diagram, iron-carbon phase diagram, lever rule,…
Powered by
https://onlinecourses.nptel.ac.in/noc18_mm05/unit?unit=23&assessment=81 4/4