Professional Documents
Culture Documents
EJOT FDS® The flow drill screw for high strength sheet
metal joints
Assembly stages:
1. Warming up
4. Thread forming
6. Tightening
Designs
Material Case hardened mild steel Case hardened mild steel Case hardened mild steel
Application Assembly without pilot hole Assembly with pilot hole Assembly without pilot hole
Sheet material: steel 0,3 1,8 mm steel 0,4 2,0 mm steel 0,4 1,5 mm
aluminium 0,8 5,0 mm aluminium 0,4 3,0 mm aluminium 0,4 2,0 mm
magnesium 0,8 - 3,5 mm magnesium 0,8 - 3,5 mm magnesium 0,8 - 2,0 mm
stainless steel 0,4 1,5 mm
Characteristics assembly without pilot hole pre-hole in the sheet metal fastening in unpunched sheet
with approximately half of the metal
nominal screw diameter
no hole overlap problems with a certain tolerance absorption no hole overlap problems with
through-hole possible possible through different through-hole possible
sized pre and through-holes
possible
especially suited for automa- preferable for manual assem- suitable for manual and auto-
ted assembly bly mated assembly
02.2010 All technical data may be subject to technical improvements.
extremely high strength screw low pressure force necessary low pressure force necessary
joint
the ideal screw for the safe high process stability and extremely high strength screw
assembly of dynamically strength of the screw joint joint
loaded screw joints despite pre–hole
For more information please contact EJOT Hotline, phone +49 2751 529-123, fax 529-98 123, e-mail hotline@ejot.de