This document is a tender BOQ (bill of quantities) for 11kV power evacuation arrangements. It contains 17 line items with descriptions and quantities of materials needed. These include items like dry river sand, bricks, cement concrete covers, GI pipes, steel tubular poles, XLPE cables, cable termination boxes, cross arms, air break switches, lightning arresters, concrete, danger notice plates, anti-climbing devices, and drop out fuse assemblies. The quantities specified are the estimated amounts of each item required to complete the 11kV power evacuation work.
Original Description:
BOQ for 11kV power evacuation with double pole structure and also having main and check TVM meters
This document is a tender BOQ (bill of quantities) for 11kV power evacuation arrangements. It contains 17 line items with descriptions and quantities of materials needed. These include items like dry river sand, bricks, cement concrete covers, GI pipes, steel tubular poles, XLPE cables, cable termination boxes, cross arms, air break switches, lightning arresters, concrete, danger notice plates, anti-climbing devices, and drop out fuse assemblies. The quantities specified are the estimated amounts of each item required to complete the 11kV power evacuation work.
This document is a tender BOQ (bill of quantities) for 11kV power evacuation arrangements. It contains 17 line items with descriptions and quantities of materials needed. These include items like dry river sand, bricks, cement concrete covers, GI pipes, steel tubular poles, XLPE cables, cable termination boxes, cross arms, air break switches, lightning arresters, concrete, danger notice plates, anti-climbing devices, and drop out fuse assemblies. The quantities specified are the estimated amounts of each item required to complete the 11kV power evacuation work.
Dry river sand cushioning over and around the cable for cable protection in trenches, leveled and punned down 1 70 CUM complete all as specified and as directed. Note: The punned down thickness shall be measured for payment. Bricks, common burnt clay building bricks, sub–class "B", 2 designation 75 in trenches for cable protection complete 5500 each all as specified and as directed. Unreinforced Precast Cement Concrete Cable Covers, Class HV, Flat, Type - 1, of size 300 mm X 180 mm X 3 40mm in trenches for cable protection, embossed with 1500 each ELECTRIC on the top surface complete all as specified and as directed. GI pipe, 50mm bore, Light grade for cable protection at road crossing etc or laid in trenches or fixing on wall / 4 15 each poles of any type, secured with clamps complete all as specified and as directed. GI pipe, 100mm bore, Light grade for cable protection at road crossing etc or laid in trenches or fixing on wall / 5 12 RM poles of any type, secured with clamps complete all as specified and as directed. Steel tubular swaged poles complete with cast iron base plate, finial taper plug, single swan neck, bolts, nuts and screws as specified of type 410 SP–31, 9.00m long complete all as specified. Note: Earth work Excavation, PCC, Coping will be 6 8 each measured and paid separately. Rate quoted by the contractor is deemed to be inclusive of two coats of aluminium paint over a coat of red oxide primer, embedded portion in concrete shall be treated with tarring and sanding. XLPE insulated and PVC sheathed, FRLS, armoured heavy duty underground cable, ISI marked with aluminium stranded conductor 1100 Volt grade of size 4 Core, 16 Sq.mm cross section suitable for earthed system, laying 7 580 rm in trenches / duct / fixed to poles / drawn through pipes / sleeving through pipe in duct, including suitable size Double compression copper stainless steel cable gland, crimping type cable lugs, sockets etc complete. Cable End Termination box, Heat Shrinkable, Outdoor type suitable for 11 KV, 185 Sq.mm XLPE, 3 Core Power 8 cable with aluminium conductor including dismantling 7 job 8 7 job old cable end termination of any description complete all as directed. Steel tubular swaged poles complete with cast iron base plate, finial taper plug, bolts, nuts and screws as specified of type 410 SP–55, 11.00m long complete all as specified. Note: Earth work Excavation, PCC, Coping will be 9 measured and paid separately. Rate quoted by the 8 each contractor is deemed to be inclusive of two coats of aluminium paint over a coat of red oxide primer, embedded portion in concrete shall be treated with tarring and sanding. Cross Arms, Bracings, Supports, Clamps and back plates fabricated from structural steel sections including nuts, bolts washers, welding bending cold or hot, drilling holes 10 for bolts, in any shape or size as indicated or directed and 200 Kg including applying two coat of aluminium paint over a coat of red oxide primer after preparation of new steel surfaces complete all as directed. Air Break Switch, Gang Operated, Triple Pole, Outdoor type, mechanically operated, mounted on 12 Nos insulators and steel frame, with operating mechanism working from ground level complete with locking 11 arrangements including pad locks with key of Make 4 each Godrej / Harrison, for current rating 200 Amps, 11000 Volts and insulators suitable for 11 KV, HT, 50 Hz including GI pipe and all other materials complete all as specified and as directed. Lightning Arresters, 11 KV, Expulsion type complete with 12 all fittings, 65 kilo Amps discharge capacity, distribution 4 set of 3 class complete all as specified and directed. PCC 1:4:8, Type D2, using 40mm graded stone aggregate 13 as in Foundation, Fillings, Mass concrete, Footings etc 10 CUM complete all as specified. PCC 1:3:6, Type C1, using 20 mm graded stone aggregate as in coping including use and waste of form work and 14 finishing the exposed faces of concrete even and smooth 4 CUM without using extra cement complete all as specified and as directed. HT Danger Notice Plate of 1.6mm thick mild steel sheet, vitreous enamelled white, with letters, figures and 15 conventional skull and bones in Signal Red colour and 2 each fixed with M.S. clamps, bolts and nuts of size 25 X 20 cm complete all as specified and as directed. Anti-Climbing Device, spikes type fabricated out of MS bars [round, square and flat] including nuts, bolts, 16 50 kg washers and welding in two halves made to shape to suit 16 50 kg the cross section of the pole including of two coats of aluminium paint over a coat of red oxide primer complete all as specified and as directed.
Drop out Fuse assembly mounted on Insulator and steel frame,
17 Horizontal / Vertical type for HT, 11 KV lines including 9 per Set connections etc. complete all specified and as directed (AS PER Tender BOQ)